Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 148081 dokumen yang sesuai dengan query
cover
"The purpose of this reserach is to find out the influence of laser shooting to the ovaries stem of eye,ablation of crab's eye to the level of egg's maruty,the diameter of eggs and the number of eggs scylla serrata....."
Artikel Jurnal  Universitas Indonesia Library
cover
Basrul Bahar
"ABSTRACT
Probing of the atmospheric parameters have been done by many scientists since a century ago up to present with various techniques. A simple system of laser radar without using any collimated beam but a reflected mirror as transmitter and a small cassegranian type (10.5 an in diameter) telescope as receiving was constructed to investigate the relative Mie backscattering coefficient by utilizing a nitrogen laser as a light source in the range of measurement bellow 1 Km. The backscattered light received by the receiving telescope is converted into electric current by photomultiplier and is shown and known as "A scope" display on an oscilloscope. SNR of the signal from photomultiplier was increased by using a boxcar integrator and its output could be recorded with XY recorder.
"
Depok: Fakultas Teknik Universitas Indonesia, 1988
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Jakarta: Program Pascasarjana Universitas Indonesia, 1992
621.366 PER
Buku Teks  Universitas Indonesia Library
cover
Syamsir Dewang
"ABSTRACT
Laser induced thin film production (LITFP) technique was employed for making plumbum (Pb) thin film by nitrogen laser deposition in miniature scale. The energy of nitrogen laser operated at 12.5 kv, 90 torr was 3.5 mj with 5 ns pulse duration, thus producing peak power at around 0.7 MW. Pb plasma of 1 cm diameter was generated in each laser bombardment, producing thin film above the glass substrate.
The thin film characteristics were measured by means of their thickness and surface morphology using scanning electron microscope (SEM). It was proved that there was a linear relationship between the number of laser shots and film thickness."
1993
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Cut Semayang Muda
"Kopling antara amplifier permukaan miring dan fiber taper lens-ended diselidiki secara teori. Penelitian teori didasarkan pada model gelombang bidang tiga dimensi yang dihitung melalui pergeseran fasa akibat permukaan iring. Kopling diselidiki berkenaan dengan parameter-parameter berkas dari pandu gelombang amplifier lens-ended, dan juga berkenaan dengan posisi fiber. Terjadinya rugi-rugi kopling karena permukaan miring dan karena variasi dari uji lens yang terbaik, rugi untuk permukaan miring 10° ditemukan lebih kecil dari 0.5 dB dibandingkan amplifier permukaan normal.

The coupling between angled-facet amplifiers and tapered lens-ended fibers is investigated theoretically. The theoretical investigation is based on a three-dimensional plane wave model which accounts for the phase differences introduced by the angled facets. The coupling is investigated with respect to the beam parameters of the amplifier wave guids and the tapered lens-ended fiber, and also with respect to the fiber position. For optimized lens radii the excess loss for 0l0° facet angle is found to be less than 0.5 dB compared to a normal facet amplifier."
1999
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Sudirman
"ABSTRACT
The frequency dobled Rd: YAG laser (532 nm/10ns, 15mj/pulse) uses a pulsed, frequency dobled; which provides a monochromatic, energy source with extremely high peak power and to has capability to develop of latent fingerprint on various surface. In the porous surfaces, this laser to has superiority, the compared with the development another methods, like powder and chemical method in latent fingerprint development.
The high peak power of the laser causes Palmar sweat: contain a variety compounds, among them amino acids, oils, enzymes, vitamins and other chemicals with in the print to fluoresce. Some latent fingerprints will fluoresce in their natural state during exposure to this laser energy.
The natural state fluorescing prints make can be documented and recording by high-resolution TV cameras and monitor for maximum sensitivity. The next step, the compare latent fingerprints products with visible impression by comparable instruments, see patterns of the friction ridges and be found same amount of their galton detail.
"
1995
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Alvita Ramadhina
"Titanium memiliki sifat inert dan biokompatibel sebagai bahan dasar implan tulang manusia. Namun, titanium tidak dapat menginduksi osseointegrasi yang berfungsi untuk mempercepat pemulihan tulang karena tidak memilliki sifat bioaktif sehingga dibutuhkan modifikasi permukaan titanium dengan lapisan material bioaktif. Penelitian ini bertujuan untuk mengetahui pengaruh energi laser terhadap sifat bioaktivitas Ti-6Al-4V dengan deposisi lapisan tipis magnesium hidroksiapatit menggunakan metode Pulsed Laser Deposition (PLD) ND:YAG dengan panjang gelombang 532 nm (second harmonic). Variasi energi laser berada di energi 60 mJ, 80 mJ, dan 100 mJ. Sampel hasil coating kemudian di-annealing pada temperatur 300 ?C selama dua jam dengan heating rate 5 ?C. Tiap sampel hasil coating kemudian akan direndam dalam r-SBF (Revised Simulated Body Fluid) selama 14 hari dengan temperatur 37 ?C dalam water bath. Karakterisasi sampel hasil coating meliputi uji SEM-EDS, uji XRD, uji kemampubasahan (wettability). Dengan membandingkan uji EDS sampel hasil coating dengan energi 80 mJ memiliki rasio Ca:P tertinggi dibanding sampel lain. Perbandingan hasil tiap sampel menunjukkan semakin tinggi energi laser akan menghasilkan lapisan tipis dengan kemampubasahan lebih rendah. Selain itu, ditemukan bahwa penggunaan energi laser PLD ND:YAG (532 nm) pada energi 60 mJ, 80 mJ, dan 100 mJ tidak berpengaruh pada kristalinitas hidroksiapatit dan hasil deposisi hidroksiapatit merupakan amorf.

Titanium has inert and biocompatible properties as the base material of human bone implants. However, titanium cannot induce osseointegration which serves to accelerate bone recovery because it does not have bioactive properties so it requires modification of the titanium surface with a layer of bioactive material. This study aims to determine the effect of laser energy on the bioactivity properties of Ti-6Al-4V by deposition of a thin layer of magnesium hydroxyapatite using the Pulsed Laser Deposition (PLD) method with a wavelength of 532 nm (second harmonic) using ND: YAG laser. Laser energy variations are at energies of 60 mJ, 80 mJ, and 100 mJ. The coating sample was then annealed at 300 ?C for two hours with a heating rate of 5 ?C. Each coated sample will then be immersed in r-SBF (Revised Simulated Body Fluid) for 14 days at a temperature of 37 ?C in a water bath. Characterization of coating samples includes SEM-EDS test, XRD test, and wettability test. By comparing the EDS test, the coating sample with an energy of 80 mJ has the highest Ca:P ratio compared to other samples. A comparison of the results of each sample shows that the higher the laser energy will produce a thin layer with lower wettability. In addition, it was found that the use of ND:YAG (532 nm) PLD laser energy at energies of 60 mJ, 80 mJ, and 100 mJ had no effect on the crystallinity of hydroxyapatite and the resulting hydroxyapatite deposition was amorphous."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Abdul Multi
"ABSTRAK
Telah dilakukan perhitungan reflektifitas pada struktur pandu gelombang permukaan miring dan jendela yang diperlukan oleh amplifier laser untuk mengurangi pengaruh osilasi mode Fabry-Perot, memperbesar penguatan sinyal, memperoleh bandwidth yang lebar dan memperkecil loss daya optik. Disamping itu reflektifitas permukaan yang rendah sangat diperlukan untuk mewujudkan amplifier laser semikonduktor gelombang berjalan (TWSLA). Sebelum menghitung reflektifitas tersebut, terlebih dahulu dilakukan penurunan matematik untuk mendapatkan persamaan reflektifitas gabungan antara struktur permukaan miring dan jendela.
Penggunaan struktur permukaan miring dan struktur jendela pada amplifier laser untuk memperkecil reflektifitas permukaan merupakan pilihan yang tepat sebagai suatu alternatif untuk menggantikan pemakaian lapisan anti refleksi. Reflektifitas permukaan yang diperlukan oleh amplifier laser semikonduktor TW harus kurang dari 0,1%. Untuk mendapatkan reflektifitas tersebut dengan menggunakan lapisan anti refleksi merupakan masalah yang sulit dalam pembuatannya.
Telah diperoleh bahwa reflektifitas gabungan mempunyai nilai yang lebih kecil dari pada reflektifitas struktur permukaan miring atau jendela sendiri-sendiri. Dengan pengguaan struktur permukaan miring sebesar 7° dan struktur jendela yang panjangnya antara 30 gm sampai dengan 50 gm, maka diperoleh reflektifitas gabungan dari 0.0079% sampai 0.0023%. Hasil tersebut didapat dengan mengolah data-data fabrikasi amplifier laser semikonduktor GaInAsP/InP.
"
1998
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Hendrik Kurniawan
"ABSTRAK
Dengan mengfokuskan berkas pulsa laser karbon dioksida pada berbagai macam target pada tekanan rendah, akan terbentuk plasma yang unik. Dalam disertasi ini struktur dan dinamika dari plasma yang unik ini dapat diperoleh dengan mengembangkan metode pengamatan plasma yang baru yaitu pengukuran distribusi ruang dari intensitas emisi pada berbagai waktu tunda. Plasma ini terdiri atas daft bagian; pertama yaitu bagian kecil dari plasma (disebut plasma primer) yang memancarkan spektrum emisi kontinu hanya untuk beberapa seat diatas permukaan target. Bagian yang lain (plasma sekunder) mengembang sesuai waktu disekeliling plasma primer, memancarkan spektrum garis atomik yang sangat tajam dengan emisi latar belakang yang sangat rendah.
Juga ditunjukan bahwa emisi dari atom-atom yang terpancar keluar dari target membentuk struktur kulit (tipis), dan ionisasi dari atom-atom berlangsung lebih lambat dari pada eksitasi dari atom-atom netral. Laju pergeseran dari muka emisi adalah sebanding dengan waktu pangkat due per lima. Juga berhasil diamati bahwa titik dimana sinyal emisi mulal tampak adalah sama untuk berbagai macam target meskipun berbeda pada berat atomnya. Hasil ini mendukung model bahwa plasma sekunder dibentuk mengikuti prinsip gelombang kejut dengan plasma primer sebagai sumber energi awal.
Dengan memakal gas helium dan argon disekeliling target pada tekanan rendah, dua proses eksitasi yang berbeda terjadi pada saat pembentukan plasma sekunder. Proses eksitasi pertama disebabkan oleh mekanisma gelombang kejut, sedangkan eksitasi kedua disebabkan oleh tingkat energi metastabil pada gas mulia. Proses eksitasi kedua ini menyalurkan energi metastabil yang disimpan oleh gas mulia pada atom-atom yang dipancarkan oleh target meskipun lama setelah pulsa laser berakhir, sehingga menghasilkan intensitas emisi yang lebih tinggi di gas mulia dibandingkan di udara.
Temperatur tinggi pada plasma sekunder sebagai akibat dari kecepatan propagasi yang tinggi dari muka plasma menyebabkan plasma ini sangat cocok digunakan untuk mendeteksi atom-atom halogen yang biasanya sangat sukar diidentifikasi karena tingkat energinya yang sangat tinggi. Aplikasi analitis untuk mendeteksi unsur halogen pada contoh bubuk kimia maupun kalsium pada bahan makanan menunjukkan hubungan yang linter pada kurva kalibrasi. dalam metode Laser Microprobe Spectrochemical Analysis (LHSA) yang umum dipakai hingga saat ini untuk analisa spektrokimia, tidak terdapat hubungan yang tinier pada kurva kalibrasinya karena timbul penyarapan sendiri (self absorption) yang sangat kuat, .lumlah minimum yang dapat dideteksi untuk Cl adalah 5 ppm dan 10 ppm untuk Ca, yang mane Jauh lebih balk dibandingkan dengan metode Induction Couple Plasma (ICP) maupun metode lain. Hingga saat ini metode ICP adalah metode ter-balk yang banyak dipakal untuk analisa elemen-elemen pads bahan makanan. Metode kami akan dikembangkan menjadi metode analisa kuantitatif yang cepat, akurat dan. memiliki sensitivitas yang tinggi tidak Baja pada bahan makanan tetapi juga pada bahan biologi, geologi dan lain-lain.

ABSTRACT
A study has been conducted on the formation of the unique plasma generated by focusing a TEA CO2 laser onto various targets with low pressure surrounding gases. A new method of time-resolved measurement of spatial distribution of the plasma was carried out for analyzing the plasma structure and dynamics. The unique laser induced plasma consists of two distinct regions; the first is a small area of plasma (called primary plasma), which gives off intense continuous emission spectra for a short time just above the surface of the target. The other area (secondary plasma) expands with time around the primary plasma, emitting sharp atomic line spectra with negligibly low background signals.
It is clearly shown that emission due to the gushed atoms from the target form shell structure, and the ionization of the atoms proceeds at slower rate than the excitation of the neutral atoms. The displacement of the emission expansion is proportional to the two-fifths power of time. It has been also observed that the rising point in the time-resolved spatial distribution of the emission 1s the same regardless of the difference in atomic weight. These results support the model that the secondary plasma is excited by a shock wave with primary plasma serving as the initial explosion source.
By using helium and argon as a surrounding gases, two different excitation processes take place in farming the secondary plasma. The first excitation process is due to the shock wave mechanism, while the second process is due to the metastable state of the noble gases. It is believed that this second process transfers metastable energy to the vaporized atoms of the target for emission, even long after the laser bombardment ends, thus giving total emission intensity that is higher in the noble gases than yielding in air.
The high temperature generated in the secondary plasma as a result of its high propagating front speed has made it favorable for use in detecting atoms such as halogens which are usually very difficult to identify because of their high lying electronic energy level. Analytical application to the detection of halogen atoms in chemical powder and calcium in food material shows good linearity in the calibration curve. In the ordinary Laser Microprobe Spectra-chemical Analysis (LMSA), the calibration curve is not linear due to the strong self absorption. The detection limit of Cl, Ca is 5 ppm and 10 ppm respectively which is-better than ICP (50 ppm for Cl) and other methods. So far, ICP emission spectrometry has been used as the most convenient method for simultaneous multi elemental analysis of food materials. Our method will be developed as a rapid, high-precision, highly sensitive quantitative analytical method for not only food materials but also other biological and geological samples.
"
Depok: Universitas Indonesia, 1992
D177
UI - Disertasi Membership  Universitas Indonesia Library
cover
Budi Hardjo
"Telah dikerjakan sistem pengukuran ketinggian suatu tempat, dengan menggunakan laser HeNe. Sistim ini memanfaatkan spot sinar laser yang dikenakan pada posisi obyek tertentu yang ditangkap intensitasnya oleh teleskop dan pulsanya dibandingkan dengan pola referensi lainnya yang sudah diketahui. Hasilnya diperoleh lewat osiloskop dan dipakai untuk menghitung ketinggian spot dari permukaan tanah. Hasil pengukuran menunjukkan akurasi 95 % dengan kesalahan 4,75 %. Pengembangan lebih lanjut dari sistim yang dikerjakan ini, adalah Theodolit berbasiskan sinar laser."
Fakultas Teknik Universitas Indonesia, 2001
T2663
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>