Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 161103 dokumen yang sesuai dengan query
cover
Sherly A. Dien
"Pengukuran kadar oksigen terlarut (DO) dalam perairan merupakan salah satu parameter dalam monitoring kualitas air. Pengukuran kadar DO dengan basis elektrokimia telah banyak dikembangkan diantaranya dengan menggunakan elektroda GC termodifikasi nanopartikel Au. Namun, elektroda GC termodifikasi nanopartikel Au dapat mengalami penurunan respon pengukuran berulang oleh karena itu diperlukan elektroda yang permukaannya selalu terbarukan sehingga dapat dikembangkan sebagai elektroda disposable. Studi modifikasi permukaan plastik dengan nanopartikel Au telah dilakukan. Nanopartikel Au dengan zat penstabil sitrat dan dodekanatiol disintesis dengan menggunakan zat pereduksi NaBH4 digunakan untuk memodifikasi permukaan plastik dengan cara merendam plastik ke dalam campuran dodekanatiol, larutan nanopartikel Au dan air dengan pengadukan kuat selama 24 jam pada temperatur ruang. Karakterisasi dengan TEM menunjukan, ukuran nanopartikel Au diperoleh diameter 5-10 nm. Namun, hasil karakterisasi permukaan plastik termodifikasi dengan SEM menunjukan bahwa permukaan termodifikasi oleh nanopartikel Au berukuran lebih dari 100 nm. Pengukuran respon arus dilakukan dengan teknik siklik voltametri dengan daerah pemindaian -1000mV hingga 0 mV diperoleh penurunan arus reduksi seiring dengan meningkatnya kadar O2 mengindikasikan bahwa plastik mika termodifikasi dapat digunakan sebagai sensor oksigen.

Abstract
Measurement of dissolves oxygen (DO) in water is one of the parameters in water quality monitoring. Measurement of DO levels on the basis of electrochemistry has been develoved among others by using GC electrode modified with Au nanoparticles. However, Au nanoparticles modify on GC electrode decreased response to repeated measuremen. Therefore, electrode surface should be always renewable surface so that it can be developed as a disposable electrode. Study of plastic surface modification with Au nanoparticles have been performed. Au nanoparticles stabilized by citrate and dodecanathiol substance synthesized by using NaBH4 as reducing agent used to modify plastic surface of by soaking with strong stirring for 24 hous in room temperature. Characterization TEM shows, the size of Au nanoparticles obtained a diameters 5-10 nm. However, SEM characterization of plastic surface modified by instrument showed that particles on plastic surface modified is larger than 100 nm. Plastic modified nanoparticle Measurement of current response was done by using cyclic voltametry by scanning the range potential 1000mV to 0 mV. The reduction current was decreased with increasing O2 levels. It indicate that plastic can be used as oxygen sensor."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2011
S207
UI - Skripsi Open  Universitas Indonesia Library
cover
Cahya Mukti Setiyanto
"Elektroda boron-doped diamond (BDD) memiliki banyak keunggulan seperti jendela potensial lebar, arus latar rendah, inertness tinggi dan stabilitas. Modifikasi permukaan BDD dengan nanopartikel emas dilakukan dalam penelitian ini untuk meningkatkan konduktivitas dan sensitivitasnya sebagai sensor oksigen. Sintesis nanopartikel emas (AuNPs) dilakukan dengan menggunakan allicin, yang diperoleh dengan isolasi dari bawang putih dengan cara mengeluarkan ekstrak, sebagai agen penutup karena allicin memiliki kelompok fungsional Sulfur (S) untuk bereaksi dengan emas dan ikatan rangkap untuk direaksikan untuk memasang BDD permukaan di bawah radiasi sinar UV. Allicin yang diperoleh dikarakterisasi menggunakan Fourier-Transform Infrared Spectroscopy (FTIR), sedangkan emas yang disintesis dikoreksi dengan spektrofotometer UV-VIS, Particle Size Analyzer (PSA), dan Transmission Electron Microscopy (TEM). Hasil penelitian menunjukkan bahwa ukuran rata-rata AuNPs adalah sekitar 8.893 nm. Lebih lanjut, modifikasi permukaan BDD oleh AuNP yang disintesis ditandai oleh Scanning Electron Microscopy - Energy Dispersive Spectroscopy (SEM-EDS), menegaskan bahwa 0,6% dari AuNP dapat dipasang pada permukaan BDD. Aplikasi AuNPs yang dimodifikasi BDD sebagai elektroda kerja untuk sensor oksigen dan sensor Biokimia Oxygen Demand (BOD) menunjukkan kinerja yang baik dengan rasio sinyal-ke-latar belakang 4,6, batas deteksi oksigen terlarut 0,0537 ppm dan batas deteksi BOD 0,1214 ppm.

Boron-doped diamond (BDD) electrodes have many advantages such as wide window potential, low background current, high inertness and stability. Surface modification of BDD with gold nanoparticles was carried out in this study to improve its conductivity and sensitivity as an oxygen sensor. Synthesis of gold nanoparticles (AuNPs) is carried out using allicin, which is obtained by isolation from garlic by extracting extracts, as a cover agent because allicin has a functional group of Sulfur (S) to react with gold and double bonds to be reacted to attach the BDD surface under UV radiation. Allicin obtained was characterized using Fourier-Transform Infrared Spectroscopy (FTIR), while the synthesized gold was corrected with UV-VIS spectrophotometer, Particle Size Analyzer (PSA), and Transmission Electron Microscopy (TEM). The results showed that the average size of AuNPs was around 8,893 nm. Furthermore, the modification of BDD surfaces by synthesized AuNP was marked by Scanning Electron Microscopy - Energy Dispersive Spectroscopy (SEM-EDS), confirming that 0.6% of AuNP could be mounted on BDD surfaces. Applications of BDD modified AuNPs as working electrodes for oxygen sensors and Biochemical Oxygen Demand (BOD) sensors show good performance with a signal-to-background ratio of 4.6, a dissolved oxygen detection limit of 0.0537 ppm and a BOD detection limit of 0.1214 ppm."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
Spdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rodhoty Taza Mila
"Pendeteksian kandungan arsen (III) dalam perairan dengan metode sensor elektrokimia merupakan salah satu pengembangan cara untuk menguji kualitas air. Penelitian ini bertujuan untuk memodifikasi permukaan plastik PVC (PoliVinil Chlorida) dengan nanopartikel emas menjadi plastik yang permukaannya terdeposisi nanopartikel emas, plastik PVC-AuNP, untuk diaplikasikan sebagai sensor elektrokimia dalam mendeteksi arsen (III) dengan metode Linear Sweep Stripping Voltammetry (LSSV). Sintesis nanopartikel emas (AuNP) dilakukan dengan cara mereduksi larutan HAuCl4 dengan NaBH4 dan 6-merkaptopurin sebagai zat penstabilnya. Hasil karakterisasi nanopartikel emas dengan spektrofotometer UV-Visible, TEM, dan PSA menunjukkan bahwa nanopartikel emas ini memiliki distribusi diameter sebesar 1,0 nm s.d 2,8 nm. Nanopartikel emas ini selanjutnya digunakan untuk memodifikasi pemukaan plastik PVC dengan cara pengadukan plastik PVC dalam campuran modifikasi selama 24 jam pada suhu ruang. Hasil karakterisasi permukaan plastik PVCAuNP dengan SEM-EDX menunjukkan pencitraan morfologi nanopartikel emas pada plastik PVC-AuNP yang menunjukkan keberadaan nanopartikel emas pada permukaan plastik PVC-AuNP dengan kandungan sebesar 13,57 % (estimasi dari EDX). Hasil pengukuran XRD terhadap plastik PVC-AuNP juga memberikan informasi keberadaan Au, yakni dengan kemunculan puncak difraktogram Au pada 2θ sebesar 38,190 atau d sebesar 2,98594 Å. Sementara itu, karakterisasi dengan FTIR diamati keberadaan puncak serapan pada bilangan gelombang sekitar 380 cm-1 yang mengindikasikan adanya ikatan Au-S, yaitu ikatan antara nanopartikel emas dengan 6-merkaptopurin. Hasil karakterisasinya secara elektrokimia menunjukkan kondisi optimum pengukuran arsen (III) dicapai pada waktu deposisi 180 detik, potensial deposisi -500 mV, dan scan rate 100 mV/s. Respon arus terhadap konsentrasi arsen (III) pada plastik PVC-AuNP linier pada rentang konsentrasi 0-20 μM dengan nilai limit deteksi (LOD) sebesar 71,2725 ppb. Hasil pengujiannya selama lima jam pemakaian menunjukkan bahwa plastik PVC-AuNP bersifat kurang stabil menghasilkan respon arus mulai jam ke-3 sehingga secara keseluruhan dari penelitian ini dapat disimpulkan bahwa plastik PVC-AuNP dapat digunakan sebagai sensor elektrokimia arsen (III) yang akurat meskipun kestabilan kinerjanya lebih rendah daripada kestabilan kinerja Au bulk.

Detection of arsenic (III) composition in water with electrochemical sensor methods is one of development to control water quality. This experiment is intended to modify PVC (PoliVinil Chlorida) plastic surface by gold nanoparticles, denoted as PVC-AuNP plastic, which in turn can be applied for working electrode to detect arsenic (III). The synthesize of gold nanoparticles was conducted by reduction of HAuCl4 solution with NaBH4 and 6-merkaptopurin as nanoparticles stabilizer. The result of gold nanoparticles was characterized by UV-Visible spectrofotometer, TEM, and PSA. The characterization results indicated that synthesized gold nanoparticles had distribution of gold nanoparticles with diameter accounted from 1,0 nm to 2,8 nm. The prepared gold nanoparticles then was used to modify PVC plastic by stirring the PVC plastic within gold nanoparticles for 24 hours. The modified PVC plastic, denoted as PVC-AuNP plastic, was characterized by using SEM-EDX, XRD, and FTIR. The results indicated that PVC plastic was modified by gold nanoparticles successfully. The SEM-EDX morphology of PVC-AuNP plastic indicated the occurrence of Au element in PVC-AuNP plastic with quite good distribution ammounted to 13,57 % on the surface, while XRD measurement of PVC-AuNP plastic showed difractogram peak at 2θ of 38,190 or d spacing of 2,9859 Å which confirmed the occurrence of Au. In addition, FTIR characterization showed peak at 380 cm-1 that indicated Au-S bond, as a result of chemical interaction between gold nanoparticle and 6-mercaptopurine, which act as a binder. The result of electrochemistry characterization using potensiostat of LSSV method indicated that there was As3+ oxidation current peak. The optimum condition on measuring arsen (III) was reached at the deposition time 180 second, deposition potential -500 mV, and scan rate 100 mV/s. The current response to consentration of arsen (III) was linear in consentration range between 0?20 μM with limited value detection (LOD) ammounted to 71,2725. This experiment result in 5 hours used indicated that PVC-AuNP plastic become unstability to produce oxidation current peak started on 3rd days, so that PVC-AuNP plastic can be an option or alternative reachable working electrode although performance stability of PVC-AuNP plastic is lower than performance stability of Au bulk."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Unversitas Indonesia, 2011
S42219
UI - Skripsi Open  Universitas Indonesia Library
cover
Faiza Maryani
"Sensitivitas elektroda emas dan elektroda glassy carbon sebagai sensor oksigen dapat ditingkatkan melalui modifikasi nanopartikel emas pada permukaan elektroda glassy carbon. Modifikasi ini dapat dilakukan dengan menggunakan teknik self assembly. Deteksi oksigen dengan elektroda termodifikasi ini dapat digunakan untuk pengukuran nilai BOD. Sensor pengukuran BOD dianalisakan sebagai sensor oksigen terlarut dalam air dengan memperhitungkan selisih dari kadar oksigen yang terlarut sebelum dikonsumsi oleh mikroorganisme, dan setelah dikonsumsi oleh mikroorganisme.
Pengukuran sensor oksigen ini dilakukan dengan menggunakan cyclic voltammetry pada kisaran potensial -2000 mV hingga 2000 mV dan scanrate 100 mV/s. Puncak reduksi untuk pengukuran oksigen dengan menggunakan elektroda GC-NP Au berada pada potensial sekitar -0,538 V, sedangkan untuk elektroda GC dan Au masing-masing berada pada potensial -0,51 V dan -1,16 V.
Hasil pengukuran menunjukkan bahwa kemampuan pemisahan sinyal dari background pada elektroda GC-NP Au (S/B=1,8994) lebih baik dibandingkan pada elektroda GC (S/B=1,53) dan elektroda Au (S/B=1,19). Elektroda GC-NP Au sensitivitas yang lebih baik dibanding GC dan Au. Presisi pengukuran respon arus sebanyak 10 kali terhadap larutan buffer posfat yang dialiri oksigen selama dua menit diperoleh sebesar 19,44% (RSD) untuk Au, 11,84% untuk GC, dan 10,50% untuk GC-NP Au. Hasil pengujian elektroda GC-NP Au untuk pengukuran BOD menunjukkan perbedaan arus yang sangat signifikan pada saat adanya khamir dan saat tidak adanya khamir.

Sensitivity of gold electrodes and glassy carbon electrodes as oxygen sensors can be improved through modification of gold nanoparticles on glassy carbon electrode surface. This modification can be done using self assembly techniques. Detection of oxygen with this modified electrode can be used for the measurement of BOD value. Sensors that is used for the measurement of BOD value is sensor for measurement of dissolved oxygen in water by calculating the difference in the levels of dissolved oxygen before being consumed by microorganisms, and when consumed by microorganisms.
Measurement of the oxygen sensor is performed using cyclic voltammetry at potential range of -2000 mV to 2000 mV and scanrate 100 mV/s. Reduction peak for oxygen measurement using GC-NP Au electrode at a potential of about -0.538 V, whereas for GC and Au electrodes each are at potential -0.51 V and -1.16 V.
The measurement results show that the separation ability of the background signal on GC electrode Au-NP (S / B = 1.8994) better than the GC electrode (S / B = 1.53) and Au electrodes (S / B = 1.19). Sensitivity of GC-NP Au electrode is better than GC and Au. Precision measurement of the flow response to the phosphate buffer solution by flowing oxygen for two minutes was obtained for 19.44% (RSD) for Au, 11,84% for GC, and 10,50% for GC-NP Au. Test results-NP Au GC electrode for BOD measurement showed a highly significant difference in flow at the moment the absence of yeast and the present of yeast.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2010
S54634
UI - Skripsi Open  Universitas Indonesia Library
cover
Patandung, Fenida Larasaty
"Kolesterol merupakan komponen struktural membran sel dan berfungsi sebagai induk untuk sintesis berbagai hormon steroid, vitamin D, dan asam empedu. Kadar kolesterol rendah dikaitkan dengan dengan malnutrisi dan kadar lipoprotein rendah. Sementara kadar kolesterol tinggi dikaitkan dengan penyakit jantung coroner dan hipertensi. Maka dari itu, deteksi kolesterol sangat penting sehingga diagnosis kondisi kardiovaskular dan neurologis dapat dideteksi sedini mungkin. Sensor elektrokimia enzimatik mendapat banyak perhatian, akan tetapi memiliki kekurangan seperti mudah terdenaturasi. Pada penelitian ini dikembangkan sensor non-enzimatik kolesterol berdasarkan kompetisi pembentukan kompleks inklusi antara β-siklodektrin dan kolesterol serta β-siklodekstrin dan nanopartikel emas. Nanopartikel emas disintesis secara elektrodeposisi dengan Teknik CV pada rentang potensial 0,044 – 0,944 V vs. Ag/AgCl dengan siklus yang dioptimasi. β-CD diimobilisasi pada permukaan berbahan material nano dengan elektropolimerisasi. Peningkatan sinyal redoks proporsional dengan penambahan kolesterol. Sensor menghasilkan LoD 23 μM dan LoQ 76 μM dengan rentang linear sebesar 0-200 μM. Selain itu sensor menunjukkan selektivitas yang baik terhadap kehadiran interferensi dengan arus yang tidak berubah signifikan (99%-95%) dan repeatabilitas dengan RSD kurang dari 5%.

Cholesterol is a structural component of cell membranes and functions as a parent for the synthesis of various steroid hormones, vitamin D and bile acids. Low cholesterol levels are associated with malnutrition and low lipoprotein levels. Meanwhile, high cholesterol levels are associated with coronary heart disease and hypertension. Therefore, cholesterol detection is very important so that the diagnosis of cardiovascular and neurological conditions can be detected as early as possible. Enzymatic electrochemical sensors have received a lot of attention, but they have disadvantages such as being easily denatured. In this research, a non-enzymatic cholesterol sensor was developed based on competition for the formation of inclusion complexes between β-cyclodextrin and cholesterol as well as β-cyclodextrin and gold nanoparticles. Gold nanoparticles were synthesized by electrodeposition using the CV technique in the potential range of 0.044 – 0.944 V vs. Ag/AgCl with optimized cycles. β-CD was immobilized on a nanomaterial surface by electropolymerization. The increase in redox signals is proportional to the addition of cholesterol. The sensor produces a LoD of 23 μM and a LoQ of 76 μM with a linear range of 0-200 μM. In addition, the sensor shows good selectivity against the presence of interference with a current that does not change significantly (99%-95%) and repeatability with % RSD lower than 5%."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Siti Rosyidah
"Pengembangan sensor oksigen dan sensor BOD dilakukan dengan menggunakan sel elektrokimia. Pengukuran kadar oksigen berbasis sel elektrokimia memberikan hasil pengukuran yang cepat dan praktis namun memiliki kekurangan yaitu kestabilan respon menurun setelah beberapa kali pengukuran. Oleh karena itu, dilakukan pembuatan disposable sensor menggunakan plastik termodifikasi nanopartikel emas. Disposable sensor diharapkan menjamin akurasi pengukuran. Nanopartikel emas disintesis dengan menggunakan zat penstabil dodekanatiol dan zat pereduksi NaBH4. Karakterisasi dengan PSA menunjukkan ukuran nanopartikel Au yang dihasilkan mempunyai diameter 30,7 nm.
Preparasi plastik dilakukan menggunakan KOH 2,5 M kemudian plastik direndam dalam larutan nanopartikel Au-tiol selama 24 jam dan dikeringan. Karakterisasi permukaan plastik termodifikasi nanopartikel emas dilakukan dengan SEM-EDS. Deteksi nilai oksigen dilakukan dengan dengan teknik Multi Pulse Amperometry pada potensial -455mV. Nilai potensial tersebut didapat dari Cyclic Voltametry larutan oksigen dalam buffer fosfat pH 7 pada rentang -1000 mV sampai 1000 mV.
Hasil pengukuran amperometri menunjukkan penurunan arus reduksi seiring dengan meningkatnya kadar O2 dengan nilai regresi R2 = 0,950. Pengukuran amperometri untuk sensor BOD dilakukan dengan kehadiran mikroba bebas (free cell) Rhodotorula mucilaginosa UICC Y-181. Hasil pengukuran arus menunjukkan korelasi linier dengan peningkatan konsentrasi glukosa (R2= 0,921) yang mengindikasikan plastik termodifikasi nanopartikel emas dapat digunakan sebagai elektroda kerja pada sensor oksigen dan sensor BOD.

Development of oxygen sensor conducted using electrochemical cells. Measurement of oxygen levels based electrochemical cells provide rapid results and practical measurements. However it has lack on the response stability which decreased after several measurements. Therefore, disposable sensor is being made using plastic modified by gold nanoparticle. Disposable sensors will ensure the accuracy of measurement. Gold nanoparticles synthesized by using a dodecanethiol as stabilizing agent and NaBH4 as reducing agent. Characterization PSA indicates the size of Au nanoparticles with a diameter of 30.7 nm.
Preparation plastic conducted using KOH 2,5 M then soaked in a solution of Au-thiol nanoparticles for 24 hours and drying up. Characterization of plastic surface modified with SEM-EDS instrument. Detection of the oxygen conducted by Multi Pulse Amperometry on potential -455 mV. Potential value is obtained from Voltametry Cyclic of oxygen solution in phosphate buffer pH 7 in the range of-1000 mV to 1000 mV.
The measurement results showed that amperometric reduction current decreased with increasing levels of O2 which show regression value R2 = 0.950. Amperometry measurement conducted for BOD sensor in the presence of free cell Rhodotorula mucilaginosa UICC Y-181. The results of current measurements showed a linear correlation with increasing concentrations of glucose (R2 =0.921) that indicate plastic modified by gold nanoparticle can be used as a working electrode in the oxygen sensor and the BOD sensor.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2012
S1313
UI - Skripsi Open  Universitas Indonesia Library
cover
Wellson Andreas Kurniawan
"Nanopartikel emas (AuNPs) memiliki keunggulan berupa luas permukaan yang besar sehingga banyak digunakan sebagai sensor. Boron-doped diamond (BDD) adalah salah satu elektroda dengan sifat superior seperti jendela potensial lebar, arus latar belakang yang rendah, inert, dan stabil. Pada penelitian ini, modifikasi permukaan BDD dengan nanopartikel emas dilakukan untuk meningkatkan konduktivitas dan sensitivitas elektroda BDD untuk aplikasi sebagai sensor oksigen. Sintesis AuNPs dilakukan dengan  menggunakan capping agent alil merkaptan yang cocok dengan Au berdasarkan sifat hard-soft acid base. Karakterisasi AuNPs dengan menggunakan spektrofotometer UV-Vis spektrofotometer UV-Vis menunjukkan panjang gelombang spesifik nanopartikel emas di sekitar 510-580 nm, sedangkan karakterisasi TEM dan PSA menunjukkan ukuran AuNPs rata-rata adalah 11±4 nm. AuNPs yang disintesis kemudian dimodifikasikan pada permukaan BDD dengan menggunakan metode perendaman di bawah radiasi UV. BDD termodifikasi AuNPs (AuNPs-BDD) yang terbentuk dikarakterisasi dengan X-ray photoelectron spectroscopy (XPS) dan scanning electron microscopy (SEM-EDS). Studi pendahuluan untuk penentuan sensor oksigen (DO) dilakukan dengan menggunakan teknik cyclic voltammetry (CV). Sementara itu, aplikasi AuNPs-BDD sebagai sensor oksigen untuk penentuan biochemical oxygen demand (BOD) dilakukan dengan menggunakan teknik amperometri. Hasil pengukuran menunjukkan bahwa sensor yang dibuat memiliki kemampuan sebanding dengan elektroda emas dan memiliki performa yang cukup baik sebagai sensor oksigen dengan nilai S/B, LOD DO, dan LOD BOD berturut-turut sebesar 4,01, 0,085 ppm, dan 0,055 ppm.

Gold nanoparticles (AuNPs) have an advantage in terms of surface area and are widely used as sensors. Boron-doped diamond electrode (BDD) is one of the electrodes with superior properties such as a wide potential window, low background current, inert, and stable. In this work, modification with gold nanoparticles was carried out to increase the conductivity and sensitivity of BDD electrode for application as oxygen sensors. The synthesize of AuNPs was performed using allyl mercaptan as the capping agent, which suitable for Au based on its hard-soft acid properties. Characterization by using UV-Vis spectrophotometer showed that AuNPs was successfully synthesized due to the specific gold nanoparticles wavelength at around 510-580 nm, while TEM and PSA characterization showed that the average of AuNPs size was 11±4 nm. The synthesized AuNPs was then employed to modify the BDD surface by immersion method under UV irradiation. The preliminary study of determining the oxygen (DO) sensor was carried out using the cyclic voltammetry (CV) technique. Meanwhile, the application of AuNPs-BDD as an oxygen sensor for the determination of biochemical oxygen demand (BOD) was carried out using amperometric technique. The result showed that the sensor was comparable to gold electrode and had a good performance as oxygen sensors with the S/B, LOD DO, and LOD BOD value were 4.01, 0.085 ppm, and 0.055 ppm respectively.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nathanael, Dante
"Pengembangan sensor BOD dilakukan dengan elektroda glassy carbon terdeposisi partikel emas dan terimobilisasi lapisan tipis khamir Candida fukuyamaensis UICCY-247. Proses modifikasi glassy carbon dengan partikel emas dilakukan dengan proses elektrodeposisi pada potensial -300mV dengan menggunakan Multi Pulse Amperometry (MPA) terhadap Ag/AgCl. Karakterisasi dengan SEM menunjukkan ukuran partikel emas yang melapisi glassy carbon adalah sekitar 66 nm. Proses imobilisasi mikroba khamir dilakukan dengan matriks Agarose/KCl 2% yang diratakan pada permukaan membran Nafion®. Deteksi nilai oksigen yang digunakan oleh mikroorganisme dilakukan dengan teknik MPA pada potensial -600mV. Hasil pengukuran kalibrasi linier pada keadaan free cell dan keadaan terimobilisasi lapisan tipis khamir menunjukan nilai daerah kelinieran yang baik dengan nilai regresi R2 = 0,93 untuk keadaan free cell dan R2 = 0,933 untuk keadaan terimobilisasi lapisan tipis khamir. Pengukuran terhadap kestabilan lapisan tipis menunjukan bahwa pada setiap hari pengukuran, terjadi penurunan arus reduksi yang terukur sebagai akibat semakin sedikitnya jumlah sel khamir yang hidup dalam sistem. Presisi pengukuran dengan elektroda GC-Au pada 15 kali pengukuran dengan cyclic voltametry memberikan nilai RSD 18,49% untuk keadaan tanpa kehadiran sel khamir dan RSD 14,65% dalam keadaan terimobilisasi lapisan tipis sel khamir. Pengaruh kehadiran logam berat pada sistem pengukuran dilakukan dengan memvariasikan konsentrasi spesi Cu. Pengukuran dengan MPA pada -600mV terhadap Ag/AgCl menunjukan kenaikan arus reduksi terhadap kenaikan konsentrasi spesi Cu karena makin sedikit jumlah oksigen yang dapat digunakan oleh mikroorganisme akibat jumlah mikroorganisme efektif dalam sistem akan semakin sedikit. Uji kesetaraan yang dilakukan antara metode sensor BOD dan BOD konvensional menghasilkan perbandingan yang cukup baik sehingga dapat disimpulkan metode sensor BOD memiliki keakuratan pengukuran yang cukup baik.

The development of BOD sensor conducted with glassy carbon gold particles deposited electrode and immobilized with a thin layer of yeast Candida fukuyamaensis UICCY-247. The process of glassy carbon modification with gold particles carried by the process of electrodeposition at a potential 300mV by using Multi-Pulse Amperometry (MPA) against Ag / AgCl. Characterization by SEM shows the size of gold particles lining the glassy carbon is about 66 nm. The process of microbial immobilization of yeast is done by using matrix agarose / KCl 2%, which flattened at the surface of Nafion ® membrane. Detection of oxygen used by microorganisms was done by using MPA on the potential-600mV. Linear calibration measurement results on the state of free cell and immobilized state of a thin layer of yeast showed good linearity local value with the value of regression R2 = 0.93 for the state of free cell and R2 = 0.933 for the immobilized state of a thin layer of yeast. Measurements showed that the stability of a thin layer on each day of measurement, there was a measurable decrease in flow reduction as a result of the small number of yeast cells that live within the system. Precision measurement with GC-Au electrode in 15 times of measurement by cyclic voltametry 18.49% RSD value for the state without the presence of yeast cells and 14.65% RSD in the immobilized state of a thin layer of yeast cells. Effect of the presence of heavy metals on the measurement system is done by varying the concentration of Cu species. Measurements with MPA at-600mV against Ag / AgCl showed increased flow reduction of Cu species concentration increases because the less amount of oxygen that can be used by microorganisms due to the number of effective microorganisms in the system will be less. Equivalence test conducted between the sensor BOD and BOD methods of conventional produce a pretty good ratio so it can be concluded, BOD sensor has a good accuracy on measurement."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2011
S360
UI - Skripsi Open  Universitas Indonesia Library
cover
Siti Astari Rahmani
"Congo Red (CR) merupakan senyawa diazo yang sering digunakan dalam industri sebagai zat warna dan bersifat karsinogenik. Modifikasi ZnO/Zeolit oleh nanopartikel emas (AuNP) menggunakan ekstrak daun katuk fraksi metanol diaplikasikan sebagai katalis untuk reaksi degradasi termal CR menggunakan H2O2. Ekstrak daun katuk (EDK) berperan sebagai agen pereduksi dan agen penstabil AuNP. AuNP optimum disintesis menggunakan EDK fraksi metanol 0,01% pada temperatur ruang dengan kestabilan mencapai 24 hari. Spektrum UV-Vis menunjukkan nilai panjang gelombang maksimum AuNP sekitar 536 nm.
Karakterisasi FT-IR menunjukkan bahwa adanya interaksi antara senyawa golongan fenolat dengan AuNP. Karakterisasi TEM, PSA, dan XRD menunjukkan rata-rata diameter AuNP sebesar 4-17 nm dengan bentuk spheric (bulat) dan memiliki struktur kristal face centered cubic. AuNP selanjutnya digunakan untuk memodifikasi ZnO/Zeolit dan dikarakterisasi menggunakan UV-Vis DRS, TEM-SAED, SEM-EDS, serta XRD.
Hasil karakterisasi tersebut menunjukkan bahwa AuNP dan ZnO berhasil terimobilisasi pada permukaan Zeolit. Degradasi termal CR dilakukan menggunakan H2O2 dengan katalis ZnO, Au/ZnO, ZnO/Zeolit, dan Au/ZnO/Zeolit. Studi kinetika degradasi CR menunjukkan katalis Au/ZnO/Zeolit memiliki aktivitas katalitik yang baik dengan laju reaksi 1,97 x 10-6 M menit-1 dan % dye removal mencapai 100%.

Congo Red (CR) is a diazo compound that industrially used as dye and it is carsinogenic. Modification of ZnO/Zeolite by gold nanoparticles (AuNP) using methanol fraction of katuk leaves extract (EDK) have been applied as thermal degradation catalyst of CR using H2O2. EDK is used as reduction and stabilizer agent of AuNP. The optimum condition of AuNP was synthesized using 0,01% EDK at room temperature and its stability up to 24 days. Spectrum of UV-Vis showed that AuNP has the maximum wavelength 536 nm.
Characterization using FT-IR showed the interaction between fenolic compound group and AuNP. Characterization of TEM, PSA, also XRD obtained the range diameter of AuNP 4-17 nm with spheric shape and has face structure cubic crystalline structure. Further AuNP used for modify ZnO/Zeolite and characaterized using UV-Vis DRS, TEM-SAED, SEM-EDS, also XRD.
The results indicate that both AuNP and ZnO successfully immobilized on the surface of the Zeolite. Thermal degradation of CR was conducted using H2O2 with ZnO, Au/ZnO, ZnO/Zeolite, and Au/ZnO/Zeolite as catalyst. CR degradation kinetic studies showed that catalyst Au/ZnO/Zeolite has good catalityc activity with the reaction rate 1,97 x 10-6 M minute-1 and % dye removal up to 100%.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Unversitas Indonesia, 2016
S63274
UI - Skripsi Membership  Universitas Indonesia Library
cover
Widy Marfi
"Strip test immunokromatografi telah dikembangkan untuk deteksi kuantitatif kandungan melamin dalam suatu sampel. Strip test ini dibuat berdasarkan reaksi kompleks antigen-antibodi. Enzim HRP digunakan sebagai label terhadap antibodi membentuk kompleks enzim HRP-antibodi (AuNP-Ab). Studi kuantifikasinya dilakukan dengan mengukur H2O2 secara elektrokimia menggunakan metode cyclic voltammetry (CV). Perangkat elektroda pada strip test difabrikasi dengan menggunakan platina (Pt) sebagai elektroda kerja,Ag/AgCl sebagai elektroda standar, dan platina (Pt) sebagai elektroda penunjang.Waktu kontak optimum antara HRP dengan H2O2 yaitu pada 300 sekon. Konsentrasi optimum dari HRP adalah 5mU/ ml dan konsentrasi H2O2 0.8mM.
Komponen strip test immunokromatografi dilakukan dengan kondisi volume sampel melamin 100μL, HRP- antibodi 40 μL, Antibodi penangkap 80 μL, waktu immunoreaksi 7 menit, volume H2O2 400 μL dan dengan kondisi elektrokimia pada rentang potensial 0 V sampai 1.5 V, scan rate 100 mV/s, serta waktu kontak 300 sekon. Range batas deteksi strip test yang didapat antara 5 – 35 ppm. Hasil ini menunjukkan bahwa strip test immunokromatografi dapat digunakan untuk mendeteksi melamin secara kuantitatif.

Immunochromatographic strip test was developed for quantitative detection of melamine in a sample. The strip test was developed based on antigen-antibody complex reaction. Horseradish peroksidase (HRP) was used as a label to antibody to form antibody-labeled Horseradish peroksidase (HRP-Ab). The quantification study was studied by electrochemical measurement of H2O2 using cyclic votlammetry method. Electrode device for the strip test was fabricated using platinum (Pt) as the working electrode, Ag/AgCl as the reference electrode,and platinum (Pt) as the counter electrode.
Immunochromatographic strip test using sample volume of 100μL, optimum consentration of HRP 5 mU/ml, capturing antibody of 10 μL, reaction time of H2O2 with HRP 5 min, optimum consentration of H2O2 0.8 mM performed by electrochemical condition of scan rate of 100 mV/s and reaction time of 300 s. Range limit of detection (LOD) of immunochromatographic strip test to melamine detection was 5-35 ppm. The result show that the strip test immunochromatographic canbe used to quantitative detection the presence of melamine.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2013
S45909
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>