Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 63419 dokumen yang sesuai dengan query
cover
Didit Yudi Permana
"Mikroalga Chlorella vulgaris Buitenzorg merupakan salah satu jenis mikroalga hijau yang banyak terdapat di Indonesia yang memiliki kemampuan sebagai penghasil biomassa dan dapat digunakan untuk mereduksi pemanasan global yang disebabkan oleh banyaknya aktifitas manusia dalam penggunaan bahan bakar fosil seperti LPG yang semakin meningkat. Terdapat berbagai macam variabel yang dapat mempengaruhi pertumbuhan Chlorella vulgaris Buitenzorg, diantaranya adalah pencahayaan, suplai CO2 serta nutrisi yang cukup.
Pada penelitian ini mikroalga akan diuji ketahanannya dengan adanya tambahan gas model hasil pembakaran LPG sebagai gas masukannya ke dalam medium kultur. Penelitian ini merupakan penelitian lanjutan dari penelitian sebelumnya dimana akan dilakukan pada kondisi pencahayaan kontinu dengan intensitas cahaya yang disesuaikan dengan jumlah inokulum serta menggunakan hasil pembakaran LPG sebagai carbon Source-nya.
Hasil penelitian menunjukkan bahwa Chlorella sp. memiliki ketahanan yang cukup baik yang ditandai dengan adanya laju pertumbuhan sel maksimum (_max) sebesar 0,016 h-1 - 0.037 h-1, berat akhir sel (Xakhir) sebesar 3,22.10-3 g/dm3 - 4,09.10-3 g/dm3 dan membutuhkan energi untuk melakukan metabolismenya (Ex) sebesar 85,04 J/g - 88,97 J/g pada tingkat efisiensi energi 0,81 % - 0,95 % dengan penambahan LPG pada kadar 0,3 % - 1 % volume.

One of Indonesian resources is Chlorella vulgaris Buitenzorg, micro algae, which has ability in CO2 fixation through photosynthesis process by converting CO2 to carbon or biomass, valuable ones, such as polysaccharide, protein or lipid. Because of this ability, Chlorella vulgaris Buitenzorg can be used as one of solution to reduce the effects of global warming caused by human activities. There are several variables which can affect CO2 fixation process through photosynthesis, among them: lighting, CO2 supply, and proper nutrition. The optimum CO2 supply is needed in order to give an optimum condition for CO2 fixation process and biomass growth.
In this research, the microalgae will be tested its resintance with residue modeling gas of combustion LPG addition as input gas into its medium. This research will use continuous lighting condition with appropriate intensity and inoculums net. Beside that, it will use residue gas of combustion LPG as its carbon source.
The result of this research shows that Chlorella sp. has a quite good resistance. It is supported by presence of maximum cell growth rate (_max) of 0,016 h-1 ' 0.037 h-1, final cell weight (Xfinal) of 3,22.10-3 g/dm3 ' 4,09.10-3 g/dm3 and energy necessity for metabolism (Ex) of 85,04 J/g ' 88,97 J/g with energy efficiency of 0,81 % - 0,95 % by adding LPG of 0,3 % ' 1 % volume.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
S49709
UI - Skripsi Open  Universitas Indonesia Library
cover
Arif Khozin Setiawan
"Chlorella vulgaris Buitenzorg adalah organisme yang sangat potensial untuk dikembangkan sebagai produsen biomassa. Mikroalga ini mengandung banyak nutrisi yang dapat berperan sebagai antioksidan dan antivirus bagi tubuh. Selain itu kandungan klorofilnya yang tinggi menjadikan Chlorella vulgaris Buitenzorg sebagai organisme pemfiksasi CO2 yang efektif. Salah satu cara yang banyak dilakukan adalah melakukan alterasi intensitas cahaya. Penelitian sebelumnya menunjukkan metode ini dapat meningkatkan produksi biomassa Chlorella vulgaris sampai 1,61 kali dan kemampuan fiksasi CO2 meningkat 3 kali dibandingkan pemberian cahaya dengan intensitas yang sama.
Tujuan utama dari penelitian ini adalah untuk mengetahui pengaruh dari gas buang terhadap ketahanan Chlorella vulgaris Buitenzorg serta mengetahui kemampuan fiksasi karbondioksida oleh mikroalga Chlorella vulgaris Buitenzorg.
Penelitian ini menggunakan gas buang dari hasil pembakaran LPG yang komposisinya sudah dimodelkan dengan komposisi gas masukan 0.3 % LPG, 5 % CO2 dan 94.7 % udara. Chlorella vulgaris Buitenzorg akan dikultivasi dalam medium beneck sebagai sumber nutrisi pada temperatur 29_C, tekanan operasi 1 atm dengan sumber cahaya lampu Phillip Halogen 20W/12V/50Hz, volume reaktor 18 dm3, dan rentang intensitas cahaya yang dipakai adalah 4.5-35 klux.
Perlakuan alterasi pencahayaan meningkatkan produksi biomassa Chlorella vulgaris Buitenzorg sampai 1.5 kali, sedangkan kemampuan fiksasi CO2 meningkat sebesar 2 kali dibandingkan dengan pencahayaan kontinu. Pencahayaan alterasi juga menghasilkan ketahanan yang lebih baik terhadap LPG daripada pencahayaan kontinyu, hal ini dapat dilihat dari ketahanan sel yang lebih baik, yaitu selama 176 jam, sedangkan pencahayaan kontinyu menghasilkan ketahanan sebesar 128 jam sebelum memasuki fase kematiannya.

Chlorella vulgaris Buitenzorg is a potential organism to be generated as biomass producer. This microalgae species contain some nutrition that can be used as antioxidant and anti-virus for human s body. Besides high amount of chlorophyll compositions make this microalgae as effective organism in CO2 fixation. Previous research using the same method showed that this method can be used to enhance biomass Chlorella sp. production until 1.61 time and by using this method CO2 fixation s ability become greater 3 times than lightening with same intensity.
The main purpose of this research is to investigate effect of exhaust gas to the Chlorella sp. resistant and to evaluate CO2 fixation by this microalgae.
This research used exhaust gas from LPG combustion that its compositions have been modelized. Inlet gas composition is 0.3 % LPG, 5 % CO2, and 94.7 % air. Chlorella vulgaris Buitenzorg was cultivated in Beneck Medium as source of nutrition in 29_C, 1 atm, light lamp source used is Phillip 20 W/12 V/ 50 Hz. Reactor volume is 18 dm3 and range of light intensity is 4.5-35 klux.
Alterating lightening treatment could enlarge Chlorella sp. biomass production until 1.5 times. Besides fixation CO2 ability could escalate until 2 times that constant lighting. Alterating lightment make microalgae resistant to LPG become better than constant lighting. This conclusion known from longer cell life time which about 176 hours. Besides, continues lightening resulted shorter life time which is about 128 hours before death phase.
"
Depok: Fakultas Teknik Universitas Indonesia, 2008
S49684
UI - Skripsi Open  Universitas Indonesia Library
cover
Riesta Anggarani
"

Dimethyl Ether (DME) adalah energi alternatif yang memiliki sifat dan karakteristik mirip dengan Liquefied Petroleum Gas (LPG) yang telah banyak diteliti sebagai bahan bakar untuk berbagai aplikasi. Dalam kaitannya dengan kondisi di Indonesia dimana saat ini impor LPG telah meningkat sangat pesat terutama untuk memenuhi kebutuhan sektor rumah tangga, penelitian untuk mengetahui karakteristik pembakaran terutama pada pembakaran difusi DME dibandingkan dengan LPG menjadi sangat penting. Penelitian yang dilakukan ini bertujuan untuk membandingkan karakteristik nyala api difusi terutama Wobbe Index, stabilitas nyala api, Tinggi Api (Flame Height , FH) dan Beban Pembakaran (Burning Load, BL) yang dihasilkan oleh bahan bakar DME serta campuran LPG-DME dibandingkan dengan LPG, serta pengaruh parameter jet velocity aliran bahan bakar. Eksperimen yang dilakukan menggunakan burner yang didesain khusus untuk memperoleh variasi kecepatan jet dan pengaruh bahan bakar yang digunakan. Uji kinerja menggunakan kompor mini juga dilakukan untuk membandingkan FH, temperatur nyala api, dan efisiensi penggunaan bahan bakar DME terhadap LPG. Hasil yang dicapai yaitu perbedaan karakter pembakaran LPG dan DME terutama untuk parameter Wobbe Index dan stabilitas nyala api yaitu Blow Out dan Lift Off dapat didekati dengan pencampuran DME ke dalam LPG hingga maksimum komposisi DME 23% massa dan pada rentang fuel jet velocity 10 m/s – 34 m/s. Nilai optimum ini diperoleh pada kondisi eksperimen dengan burner tipe cylindrical dan pada diameter nosel  2,5 mm. FH  yang setara antara DME dengan LPG dicapai pada rentang uf  = 3,5 m/s – 6,3 m/s saat df  = 4,5 mm untuk DME dan df  = 2,5 mm untuk LPG, serta pada rentang uf  = 5,3 m/s – 10,8 m/s saat df  = 5,0 mm untuk DME dan df  = 3,0 mm untuk LPG. BL yang setara antara DME dengan LPG dicapai pada uf lebih kecil dari 0,5 m/s untuk semua diameter nosel. Uji kinerja pada kompor mini menghasilkan efisiensi penggunaan bahan bakar DME yang lebih tinggi, yaitu ketika pengatur air entrainment pada posisi close 1 sebesar 64,5% dan close 2 sebesar  67,9%, dibandingkan dengan LPG pada posisi open sebesar 62,5%. 


Dimethyl Ether is one of the promising alternative energy to substitute Liquefied Petroleum Gas (LPG) considering its similarity on properties and behavior to LPG. Indonesia currently import huge amount of LPG, mainly for energy in household purpose. Considering the potentiality of DME to substitute LPG especially for household purposes which basically works in atmospheric diffusion combustion, it is very important to study the comparison of LPG and DME in the field of diffusion combustion characteristics. This study aim to compare diffusion flame characteristics of DME, LPG, and the blends of DME mixed LPG with DME composition of 10%, 20%, 30%, 40% and 50%. The characteristics being investigated are Wobbe Index, flame stability, Flame Height (FH) and Burning Load (BL) under the effect of fuel jet velocity (uf), which performed by a series of experiments in laboratory. The experiments were done using a specially designed cylindrical burner to get the variation of fuel jet velocity. The results show that the difference of Wobbe Index and flame stability represented by Lift Off (LO) and Blow Off (BO) between DME and LPG can be improved by blending DME into LPG at optimum composition of 23% weight and  is achieved at the range of uf from 10 m/s to 34 m/s. This optimum condition is achieved using cylindrical burner with  nozzle diameter (df) 2.5 mm. The equality of  FH between DME and LPG is achieved at the range of ufrom  3.5 – 6.3 m/s at df = 4.5 mm for DME and df = 2.5 mm for LPG,  and at the range of ufrom 5.3 – 10.8 m/s at df = 5.0 mm for DME and df = 3.0 mm for LPG. The equality of BL between DME and LPG is achieved at uf lower than 0,5 m/s at all nozzle diameter. Performance test on mini stove shows that DME can achieve higher fuel efficiency than LPG at different air entrainment setting, where DME achieved  fuel efficiency of 64.5%, at position of air entrainment close 1 and 67.9% at position of close 2, compare to LPG with fuel efficiency of 62.5% at position of air entrainment open.

 

"
Depok: Fakultas Teknik Universitas Indonesia, 2020
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Dwi Rachmat Aditia
"Mikroalga Chlorella vulgaris Buitenzorg merupakan salah satu jenis mikroalga hijau yang umumnya digunakan sebagai penghasil biomassa yang dapat dimanfaatkan sebagai suplemen makanan dan kesehatan, ternyata juga bermanfaat untuk mereduksi pemanasan global yang disebabkan oleh banyaknya aktifitas manusia dalam penggunaan bahan bakar fosil yang semakin meningkat, yaitu dengan melakukan fiksasi CO2 melalui proses fotosintesis. Namun, pembakaran bahan bakar fosil menghasilkan gas NOx atau N2O yang bersifat racun bagi pertumbuhan mikroalga. Pada penelitian ini Chlorella vulgaris Buitenzorg akan diuji ketahanannya terhadap N2O, ditinjau dari jumlah berat kering sel, laju pertumbuhan spesifik, dan pH kultur. Selain itu juga akan dilakukan metode untuk meningkatkan pertumbuhan Chlorella vulgaris Buitenzorg terhadap gas N2O. Hasil penelitian menunjukkan bahwa Chlorella vulgaris Buitenzorg.
Hasil penelitian menunjukkan bahwa Chlorella vulgaris Buitenzorg memiliki ketahanan yang cukup baik terhadap N2O untuk Xawal sebesar 0,4 g/l. Metode efektif yang dapat digunakan untuk meningkatkan ketahanan terhadap N2O adalah dengan meningkatkan konsentrsi sel awal dan melakukan kontrol pH kultur, dimana dengan adanya kontrol pH, pertumbuhan untuk Xawal sebesar 0,1 g/l akan sama dengan pertumbuhan untuk Xawal sebesar 0,4 g/l tanpa kontrol pH.
Chlorella vulgaris Buitenzorg is a kind of green coloured microalgae that is widely used as biomass producer that can be used as food supplement and health. This microalgae is also can be used to reduce global warming , as a result of fossil fuel combustion, that can be done by CO2 fixation. Consequently, the combustion of fossil fuel can produce NOx or N2O that are toxic in the growth of microalgae. In this research, Chlorella vulgaris Buitenzorg's strength will be tested for the resisctance to N2O. There is also a method that can be used effectively to resist the N2O's effect.
The result of this research shows that Chlorella vulgaris Buitenzorg has good resistance against N2O for the value of X are 0,4 g/l. The effective method to increase the growth of microalgae with the N2O inhibition is using high concentration and by controlling the pH value, which for control pH can increase the growth of X= 0,1 g/l to be likely same as X for X is 0,4 g/l.
"
Depok: Fakultas Teknik Universitas Indonesia, 2010
S51804
UI - Skripsi Open  Universitas Indonesia Library
cover
Tarryn Frances Nathalie Meka
"Mikroalga merupakan tumbuhan air tergolong ramah lingkungan dan memiliki kemampuan adaptasi yang tinggi. Salah satu jenis mikroalga yang sedang dikembangkan di Indonesia adalah ganggang hijau Chlorella sp. Selain kemampuan biofiksasi CO2 tinggi, Chlorella sp juga memiliki komposisi biomassa tinggi yang dapat dimanfaatkan sebagai potensi bahan pangan alternatif dan sumber bahan baku biofuel.
Beberapa penelitian pendahuluan telah dilakukan untuk mengamati potensi pemanfaatan mikroalga serta metode paling optimal untuk mempersiapkan pembiakkan Chlorella sp. dalam skala besar. Salah satu hasil penelitian yang menjadi dasar kajian kali ini adalah mengenai peningkatan produksi biomassa dengan dua metode pencahayaan kontinu, yakni dengan intensitas tetap dan dengan metode alterasi. Penelitian lain yang juga dijadikan dasar adalah mengenai susunan optimum fotobioreaktor untuk peningkatan produksi biomassa.
Penelitian ini merupakan pengembangan dari penelitian produksi biomassa yang bertujuan memperoleh komposisi nutrisi esensial dari biomassa Chlorella sp. hasil biakkan sebelumnya. Evaluasi kualitas nutrisi, seperti kandungan klorofil, protein, dan lipid sangat penting artinya dalam pembiakkan Chlorella sp. yang memiliki nilai ekonomi tinggi. Hal ini disebabkan pemilihan metode pembiakkan Chlorella sp. sepatutnya tidak hanya unggul dalam hal kuantitas (jumlah sel) tetapi juga kualitasnya (kandungan nutrisi). Tujuan lain dari penelitian ini adalah untuk memberikan gambaran pemanfaatan biomassa Chlorella sp. yang telah dibiakkan selama ini berdasarkan jumlah kandungan nutrisinya.
Metode pengujian yang dipilih adalah spektrofotometri sinar tampak untuk identifikasi klorofil, metode Lowry untuk identifikasi jumlah protein, serta metode Bligh-Dryer untuk identifikasi lipid dalam biomassa Chlorella sp.
Dari hasil penelitian diperoleh bahwa kandungan nutrisi esensial dalam biomassa Chlorella sp. dengan jumlah terbesar adalah protein sebesar 33.53 mg/L dan diikuti oleh klorofil sebesar 14.3 mg/L. Sementara komposisi lipid justru mengalami penurunan hingga 70% berat.

Microalgae are water plant which are environmentally friendly and also have high ability of adaptation. One kind of algae being developed in Indonesia nowadays is the genus of Chlorella sp. Not only that Chlorela sp. have high ability for CO2 fixation but also got high biomass potential which can be used as alternative food source and biofuel source.
Several previous research have been conducted to find out the biomass potential of this microalgae and the optimized method to produce it on a large scale. One of the research used as based on this experiment is about increasing biomass production in mid-scale reactor using two types of continuous illumination; the continuous and the alteration method. Other research used as based is about arranging the photobioreactor to increase biomass production.
This research is a further research in order to determine the essential nutritional content from the biomass production of Chlorella vulgaris. The evaluation of nutritional content such as chlorophyll, protein, and lipid is very important in producing Chlorella sp. with high economic value. It is because when producing Chlorella sp. we hoped that the biomass that we have is not only have great cellular content but also high nutritional content. Other goal of this research is to give prediction about how to process the biomass we ve got based on its nutritional content.
Method used to determine the nutritional content are visible spectrofotometer for chlorophyll identification, Lowry method for protein identification, and Bligh-Dryer Method for lipid identification in Chlorella vulgaris biomass.
From this research we found out that majority essential nutrition in our Chlorella sp. s biomass is protein (33.53 mg/L) followed by chlorophyll (14.3 mg/L). On the other hand, lipid composition decreased until 70% weight.
"
Depok: Fakultas Teknik Universitas Indonesia, 2009
S51835
UI - Skripsi Open  Universitas Indonesia Library
cover
Fadli Yusandi
"Tujuan dari penelitian ini adalah untuk menentukan nutrisi nitrogen yang tepat dalam memanfaatkan mikroalga Chlorella vulgaris Buitenzorg sebagai bahan baku baik biodiesel maupun suplemen makanan. Nutrisi nitrogen divariasikan menjadi empat yaitu konsentrasi yang ada pada benneck (500 mg NaNO3/Liter), konsentrasi kekurangan nitrogen (250 mg NaNO3/Liter), konsentrasi kelebihan nitrogen (750 mg NaNO3/Liter), dan sumber nitrogen yang berbeda (500 mg CO(NH2)2/Liter).
Konsentrasi nitrogen yang ada pada medium benneck merupakan nutrisi yang paling optimal untuk menghasilkan lipid hingga mencapai 0.42 g/g biomassa. Sedangkan sumber nitrogen urea merupakan nutrisi yang paling tepat untuk menghasilkan protein hingga mencapai 0.54 g/g biomassa. Untuk menghasilkan klorofil, medium yang kelebihan nitrogen merupakan nutrisi yang paling tepat hingga mencapai 4.9 g/100g biomassa.

The purpose of this study was to determine the proper nitrogen nutrients in microalgae Chlorella vulgaris Buitenzorg use as raw material for both biodiesel and food supplements. Nitrogen nutrients varied into four namely the concentration that existed at the benneck (500 mg NaNO3/Liter), the concentration of nitrogen deficiency (250 mg NaNO3/Liter), excess nitrogen concentration (750 mg NaNO3/Liter), and different nitrogen sources (500 mg CO (NH2)2/Liter).
Nitrogen concentration in the medium benneck there is the most optimal nutrition to produce lipids up to 0:42 g / g biomass. While the source of urea nitrogen is the most appropriate nutrients to produce the protein until it reaches 0:54 g / g biomass. To produce chlorophyll, medium that excess nitrogen is the most appropriate nutrients to reach 4.9 g/100g biomass.
"
Depok: Fakultas Teknik Universitas Indonesia, 2010
S51673
UI - Skripsi Open  Universitas Indonesia Library
cover
Lutfi Aulia
"LPG (Liquefied Petroleum Gas) merupakan bahan bakar yang digunakan untuk sektor rumah tangga di Indonesia. Setelah program konversi dari penggunaan minyak tanah ke LPG secara masif untuk sektor rumah tangga pada tahun 2008, permintaan akan LPG meningkat hingga dua kali lipat dan lebih dari 50% kebutuhan dalam negeri merupakan impor. Sumber energi alternatif dibutuhkan untuk bisa mensubstitusi LPG sebagai bahan bakar sektor rumah tangga guna mengurangi angka impor LPG yang sudah mencapai 70%. Dimetil Eter (DME) merupakan bahan bakar yang memiliki sifat yang mirip dengan LPG sehingga dapat digunakan secara langsung dalam menggantikan LPG dengan sedikit modifikasi. Selain dari pada itu, DME dapat diproduksi dari bahan baku yang terbarukan seperti biomassa dan batubara yang tersedia cukup melimpah di Indonesia. Dalam tahapan aplikasinya sebagai bahan bakar adalah dengan mencampurkannya dengan LPG. Studi ini bertujuan untuk mengetahui karakteristik nyala api pembakaran difusi gas (Jet diffusion flame) dari bahan bakar LPG, DME dan campurannya (LPG mix DME) pada burner tipe barel. Persentase variasi campuran DME dalam LPG yang digunakan adalah 10%,20%,30%,40% dan 50% berat campuran. Pengujian dilakukan menggunakan burner tipe barel dengan diameter lubang nosel 2,5 mm. Seluruh hasil pengujian dikomparasi dengan LPG sebagai bahan bakar referensi. Hasilnya menunjukkan bahwa karakteristik nyala api untuk tinggi api (Hf) dan panjang api (Lf) keduanya menurun seiring dengan kenaikan persentase komposisi campuran DME dalam LPG. Karakteristik nyala terangkat (lifted flame) juga mengalami penurunan ketika dibandingkan antara LPG dengan DME namun perbedaannya tidak terlalu jauh untuk keseluruhan campuran. Karaktersitik stabilitas nyala api yang dinyatakan dengan fenomena kecepatan blow-off dan lift off disajikan dalam tulisan ini. Beban pembakaran menunjukkan terjadi penurunan seiring dengan penambahan persentase campuran DME dalam LPG, hal ini berkaitan dengan nilai kalor bahan bakar DME yang lebih rendah sekitar 40% dari LPG.

Currently, Liquefied Petroleum Gas (LPG) is the main energy source used in household sector in Indonesia. After the mega conversion project from kerosene to LPG in 2008, the demand of LPG raised in to a double and more than 70% of it fulfilled by import. It is very crucial to find other alternative energy to substitute LPG for household sector. Dimethyl Ether (DME), is a fuel that has similar characteristics to LPG so it can be used in LPG supply chain with minor change. More than that, DME can be produced from coal and renewable feedstock such as biomass which is available abundantly in Indonesia. To introduce the use of DME in current household appliances, we consider applying this fuel in mixture with LPG. This study aimed to investigate jet diffusion flame characteristics of DME and its mixture with LPG with DME concentration 10%, 20%, 30%, 40% and 50% by weight. The experiment was conducted on barrel type burner. A burner tip with centered hole with diameter 2.5 mm is functioned as fuel injector. All of the result is compared to LPG as reference. The results show that the flame characteristic in term of flame height (Hf) and flame length (Lf) both are decline with the increasing of DME composition in the mixture with LPG. The lifted flame is also decline when comparing LPG to DME but only differ slightly between all mixtures. Blow off and lift off phenomena is presented. Burning load is decline with the increasing of DME composition relates with the calorific value of DME which is 40% lower than LPG."
Depok: Fakultas Teknik Universitas Indonesia, 2019
T53501
UI - Tesis Membership  Universitas Indonesia Library
cover
Richo Candra Riski Bastama
"Dalam penelitian ini telah dilakukan pencampuran dimethyl ether (DME) dan liquefied petroleum gas (LPG) sebagai bahan bakar, kemudian menguji emisi gas buang serta nyala api dari hasil pembakaran bahan bakar tersebut pada kompor. DME yang ditambahkan pada LPG sebesar 10%, 20%, 30%, 35%, 40% dan 50% (v/v). Gas emisi yang di analisa adalah gas oksida-oksida sulfur (SOx), oksida-oksida nitrogen (NOx), dan karbon monoksida (CO). Pengambilan sampel gas emisi SOx dan NOx menggunakan alat Stack gas sampler (SGS), sedangkan gas CO menggunakan alat gas analyzer. Gas SOx dianalisa menggunakan spektrofotometer dengan metode turbidimetri sedangkan gas NOx dianalisa dengan metode phenol disulfonic acid . Efek penambahan DME pada LPG menurunkan emisi gas buang SOx, NOx dan CO. Pada LPG 100%, emisi gas SOx yang dihasilkan sebesar 5,85 mg/m3, sedangkan pada campuran LPG 90%:DME 10%, LPG 80%:DME 20%, LPG 65%:DME 35%, dan LPG 50%:DME 50%, emisi SOx yang dihasilkan masing-masing sebesar 5,187; 4,565; 4,190; dan 4,083 mg/m3. Emisi gas NOx yang dihasilkan pada pembakaran LPG 100% sebesar 18 ppm, sedangkan pada campuran LPG 90%:DME 10%, LPG 80%:DME 20%, LPG 65%:DME 35%, dan LPG 50%:DME 50%, emisi yang dihasilkan masing-masing sebesar 10,425; 6,681; 6,870; dan 5,079 ppm. Emisi gas CO yang dihasilkan pada LPG 100% sebesar 9 ppm, sedangkan pada campuran LPG 90%:DME 10%, LPG 80%:DME 20%, LPG 70%:DME 30%, dan LPG 60%:DME 60%, emisi CO yang dihasilkan sebesar 7; 4; 3; dan 3 ppm. Masing-masing nyala yang dihasilkan pada campuran gas LPG-DME lebih biru dibandingkan gas LPG.

In this research has been done mixing dimethyl ether (DME) and LPG as fuel, then test the exhaust emissions and flames from the burning fuel on the stove. DME is added to LPG by 10%, 20%, 30%, 35%, 40% and 50% (v / v). Gas emissions in the analysis is the gas sulfur oxides (SOx), nitrogen oxides (NOx) and carbon monoxide (CO). The sampling of gas emissions of SOx and NOx using a Stack gas sampler (SGS), while the CO gas using a gas analyzer. SOx gases were analyzed using a spectrophotometer by the turbidimetri method while NOx gases were analyzed by the phenol disulfonic acid method. Effect the addition of DME to LPG is to lower emissions of SOx, NOx and CO. In the LPG 100%, SOx gas emissions generated is 5.85 mg/m3, while the LPG mixture of 90%: 10% DME, LPG 80%: 20% DME, LPG 65%: 35% DME and LPG 50%: DME 50%, SOx emissions are generated respectively are 5.187; 4.565; 4.190; and 4.083 mg/m3. NOx emissions generated on combustion of LPG 100% is 18 ppm, while the LPG mixture of 90%: 10% DME, LPG 80%: 20% DME, LPG 65%: 35% DME and LPG 50%: 50% DME, emissions produced respectively are 10.425; 6.681; 6.870; and 5.079 ppm. Emissions of CO gas is produced on 100% LPG is 9 ppm, while the LPG mixture of 90%: 10% DME, LPG 80%: 20% DME, LPG 70%: 30% DME and LPG 60%: 60% DME, emissions CO produced are 7; 4; 3; dan3 ppm. Each flame generated in LPG-DME gas mixture is more blue than the LPG gas. "
Depok: Fakultas Teknik Universitas Indonesia, 2011
S887
UI - Skripsi Open  Universitas Indonesia Library
cover
Ike Pujiriani
"Tesis ini pertama membahas dispersi gas, kebakaran dan ledakan akibat kebocoran tangki propana dan butana serta tabung LPG 3 kg. Bersifat kuantitatif. Disarankan pemilik tangki/penyalur LPG mengestimasikan jarak aman; membuat rencana tanggap darurat; mempersiapkan deteksi dini kebocoran dan maintenance. Pemerintah disarankan lebih teliti memberikan izin mendirikan tangki; melakukan pengawasan operasi tangki penyimpanan, terutama yang berlokasi di sekitar pemukiman penduduk.Kedua, keselamatan penyalur LPG 3 kg di Depok. Bersifat deskriptif. Disarankan penyalur LPG melakukan perbaikan secara bertahap, terutama pelatihan petugas; pemasangan lampu gas proof, alarm keadaan darurat dan gas detector; pembuatan OKD; penyediaan kotak P3K. Pemerintah disarankan mengawasi dan memfasilitasi kebutuhan penyalur.

This thesis firstly discuss the gas dispersion, fires, explosions caused by the propane and butane tank and LPG cylinder 3 kg leakage. Quantitatively. Tank owners/LPG distributors are suggested to estimate safe distance; create ERP; prepare for early leakage detection and maintenance. The Government are suggested more thoroughly give set-up tank permission; supervise storage tank operations, especially those located around settlements. Secondly, the safety of LPG 3 kg?sdistributor in Depok. Descriptively. Distributors are suggested to do improvements, especially training; gas proof lamps, emergency alarm and gas detector; emergency organization-making; first aid boxesprovision. The government are advised to oversees and facilitates the distributors?s needs.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2012
T-Pdf
UI - Tesis Open  Universitas Indonesia Library
cover
Mohamad Adi Rahman
"Salah satu parameter penting dalam meningkatkan laju produktivitas dan nilai profitabilitas dari sebuah aset adalah dengan mengaplikasikan faktor keselamatan kedalam kendali proses. Selain berfungsi untuk mengurangi potensi terjadinya kecelakaan kerja, meminimalisasi terjadinya potensi shutdown, dan mengurangi tingkat kebocoran zat berbahaya atau terlepasnya material hidrokarbon ke lingkungan, faktor tersebut memiliki peran yang sangat kritikal dalam pengalokasian perangkat keselamatan yang ditujukan secara khusus untuk mereduksi kriteria risiko pada tingkatan yang dapat ditoleransi.
Sebuah industri strategis harus berperan secara aktif dalam menjalankan fungsi pengelolaan dan pengawasan terhadap semua aspek yang berkaitan dengan perencanaan dan pemeliharaan fasilitas produksi atau aset, sesuai dengan regulasi dan pola kebijakan yang mengatur tentang keselamatan dan kesehatan kerja, serta langkah-langkah didalam meminimalisasi potensi risiko, baik secara kualitatif maupun kuantitatif.
Karena penilaian risiko yang terasosiasi kedalam faktor keselamatan dan biaya akan sangat tergantung dari manajemen perencanaan dan pemeliharaan fasilitas industri atau aset yang dilakukan, maka secara obyektif penelitian ini akan mendeskripsikan alternatif pemilihan perangkat Safety Critical Element (SCE) melalui Safety Instrumented System (SIS), yang dikaji melalui penerapan metode Layer of Protection Analysis (LOPA) pada Liquefied Petroleum Gas (LPG) Plant, guna menentukan nilai Safety Integrity Level (SIL), dan melihat korelasi antara Cost Effectiveness dan System/Operational Effectiveness dari perangkat tersebut.

The most important parameters that are used to increase the rate of productivity and profitability of an asset, is to applied safety factor in the process controlling. In addition to reduce the potential of accidents, minimize the potential shutdown, and to reduce the rate of leakage of hazardous substances or hydrocarbons materials release into the environment, these factors have a very critical role in the allocation of safety devices intended specifically to reduce the levels of risk criteria that can be tolerated.
A strategic industry should play an active role in carrying out the functions of management and oversight of all aspects related to the planning and maintenance of production facilities or assets, in accordance with the regulations and policies governing the pattern of occupational safety and health, as well as measures in minimizing potential risks, both qualitatively and quantitatively.
Because the risk assessment that associated with the safety factor and cost will depend on the management of planning and maintenance that practically implemented by the industrial facilities or assets, then the objective of this study will describe the alternative selection of the Safety Critical Element (SCE) through the Safety Instrumented System (SIS), which assessed through the application of the Layer of Protection Analysis (LOPA) methods in the Liquefied Petroleum Gas (LPG) plant, in order to determine the values of Safety Integrity Level (SIL), and the correlation between the Cost Effectiveness and System/Operational Effectiveness of the device.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
T34617
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>