Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 125158 dokumen yang sesuai dengan query
cover
Melisa
"Pregelatinisasi pati singkong propionat (PPSP) merupakan hasil modifikasi fisika dan kimia pati singkong, yang diperoleh dengan mereaksikan pregelatinisasi pati singkong dengan asam propionat anhidrida. Penelitian ini bertujuan untuk mengetahui karakteristik eksipien koproses yang dihasilkan dari kombinasi PPSP dengan campuran kappa dan iota karagenan (1:1) dapat digunakan sebagai eksipien dalam sediaan farmasi. Karakteristik yang dilakukan adalah karakteristik fisika, kimia dan fungsional. Koproses PPSP dengan karagenan dibuat dari campuran kappa dan iota karagenan (1:1) dengan tiga perbandingan yaitu koproses A (1:1), B (2:1), dan C (3:1) kemudian dikarakterisasi. Berdasarkan evaluasi, koproses C (PPSP: [karagenan kappa: iota karagenan = 1:1] (3:1)) dapat digunakan sebagai eksipien sediaan lepas terkendali.

Pregelatinized cassava starch propionic (PPSP) is a result of physical and chemical modification of cassava starch, which is obtained by reacting cassava starch with propionic anhydride acid. The aimed of this study is to know the characterictics of coprocessed exipient which is produced from combining pregelatinized cassava starch propionic with carrageenan (kappa:iota (1:1)) can be used as an excipient in pharmaceutical dosage forms. The characterictics of being done is characteristic of physical, chemical and functional. Coprocess ppsp with carrageenan (kappa:iota (1:1)) was made with three ratio A (1:1), B (2:1), and C (3:1), after that coprocessed is characterictics. Based on the evaluation, coprocess C (PPSP: [carrageenan kappa:iota carrageenan = 1:1] (3:1)) can be used as a controlled release dosage excipient."
Depok: Fakultas Farmasi Universitas Indonesia, 2012
S42930
UI - Skripsi Open  Universitas Indonesia Library
cover
Engkom Komariah
"Sediaan tertahan di lambung (gastroretentive) merupakan sediaan yang didesain untuk dapat memperpanjang waktu tinggal sediaan di lambung yang merupakan salah satu tempat terjadinya absorbsi obat di dalam tubuh. Sistem penghantaran mukoadhesif merupakan salah satu bentuk sediaan tersebut dengan mekanisme penempelan pada mukosa lambung. Oleh karena itu pengembangkan eksipien baru untuk bentuk sediaan tersebut perlu untuk dilakukan.
Penelitian ini bertujuan untuk melihat kemampuan eksipien koproses pragelatinasi pati singkong propionat (PPSP) dan karagenan sebagai matriks sediaan mukoadhesif tertahan di lambung. Pembuatan eksipien koproses ini didahului dengan pembuatan PPSP menggunakan anhidrida asam propionat sebagai agen pensubtitusi gugus alkilnya. Kemudian di koproses dengan campuran kappa-iota karagenan (1:1) dengan perbandingan campuran kappa-iota karagenan (1:1) : PPSP 1:1, 1:2 dan 1:3.
Hasil karakterisasi eksipien koproses menunjukan peningkatan viskositas dan kemampuan bioadhesif dibandingkan dengan eksipien penyusunnya. Eksipien koproses yang dihasilkan tersebut kemudian dibuat sediaan granul mukoadhesif. Granul mukoadhesif berbahan dasar eksipien koproses (F1, F2 dan F3) dan berbahan dasar PPSP (F4) serta karagenan (F5) dapat menempel pada mukosa lambung dan mengatur pelepasan obat hingga 32 jam untuk F1, F2, F3 dan F5, sedangkan 16 jam untuk F4. Granul F3 yang berbahan dasar eksipien koproses C memiliki kekuatan mukoadhesif pada mukosa lambung paling besar yaitu 5,2 gF dan dapat bertahan selama 10 jam pada uji bioadhesif in vitro dan 3 jam pada uji wash off, serta memiliki kadar obat dalam lambung tertinggi pada jam ke-1, 2 dan 4 yaitu berturut-turut 92,19%; 76,84%; 47,33% pada uji bioadhesif in vivo. Sebagai kesimpulan, penelitian ini memberikan gambaran bahwa eksipien koproses C yang merupakan campuran PPSP dengan karaginan kappa-iota (1:1) dengan ratio 3:1 berpotensi untuk digunakan sebagai polimer bioadhesif.

Gastroretentive dosage form has been designed to prolong gastric residence time of drug delivery system, mucoadhesive is one of of kind of them which is retained dosage form on the stomach with adhesiveness, so development in excipient for gastroretentive dosage form is needed.
The purpose of the present study was to develop and characterize coprocessed excipient pregelatinized cassava starch propionate (PCSP) and carrageenan. Coprocessed excipient product consists of carrageenan (kappa-iota = 1:1) and PCSP in ratio 1:1, 1:2 and 1:3. PCSP was prepared with propionic anhydride in aqueous medium. The product was mixed with carragenan (kappa-iota = 1:1), and characterized physicochemical and functional properties. After that, the coprocessed excipient was used as mucoadhesive granules. Granules F1, F2 and F3 were made from coprocessed excipient while granules F4 and F5 were made from PCSP and carrageenan respectively.
The result of these studies indicated that coprocessed excipient carrageenan-PCSP is suitable material for gastroretentive dosage form and drug controlled release. All formula of granules can adhere to gastric mucus and can controlled drug release for 32 hours for F!, F2, F3 and F3, while 16 hours for F4. The F3 granules were made from excipient coprocessed C have highest mukoadhesive properties on stomach, still remain for 10 hours in bioadhesive in vitro test and 3 hours in wash off test and also have highest percentage drug on the stomach at 1st, 2nd and 4th hours with values 92,19%; 76,84%; 47,33% respectively.pada uji bioadhesif in vivo. These results suggested that excipient coprocessed C were a promising polimer for gastroretentive dosage form."
Depok: Fakultas Farmasi Universitas Indonesia, 2012
T31302
UI - Tesis Open  Universitas Indonesia Library
cover
Firman Habibi
"Pregelatinisasi pati singkong (PPS) mempunyai kemampuan mengembang yang baik akan tetapi daya ikatnya rendah,sehingga menyebabkan tablet menjadi rapuh, khususnya pada tablet cepat hancur. Untuk mengatasi kekurangan tersebut diantaranya adalah melalui modifikasi PPS dengan metode koproses. Tujuan dari penelitian ini adalah membuat koprosesdari (PPS) dengan hidroksi propil metil selulosa(HPMC) yang selanjutnya digunakan dalam formulasi tablet cepat hancur.
Pada penelitian ini eksipien koproses dibuat dengan menggabungkan suspensi PPS dalam air dengan suspensi HPMC dalam air pada perbandingan 6:1, selanjutnya dikeringkan dengan drum dryer. Terhadap eksipien yang dihasilkan dilakukan evaluasi, selanjutnya digunakan dalam formulasi tablet cepat hancur. Proses pembuatan tablet menggunakan metode granulasi basah. Tablet cepat hancur dibuat 4 formula (formula ABCD), tablet yang dihasilkan dievaluasi sifat fisiknya yang meliputi kekerasan, keregasan, waktu pembasahan, waktu hancur sesuai dengan persyaratantablet cepat hancur yang baik.
Hasil evaluasi tablet yang dihasilkan menunjukkan hanya formula D yang dapat hancur sesuai dengan ketentuan Farmakope Eropa yaitu kurang dari 3 menit (88,16 ±10,61 detik), serta memiliki karakteristik sebagai berikut; kekerasan 1,73 kp ± 0,32, keregasan 0,69 ± 003,waktu pembasahan 142,66 ± 8,02 detik. Dapat disimpulkan bahwa hanya formula D memenuhi persyaratan tablet cepat hancur,baik sifat fisik maupun waktu hancur tablet.

Pragelatinized cassava starch (PCS) has a good ability to swelled but low binding capacity in tablet formulation, that causing the tablet to become brittle, especially in fast disintegrating tablets. To overcome the lack of them is through the modification of the PCS with the coprocess method. The purpose of this research was to create coprocess excipient from PCS with hydroxy propyl methyl cellulose (HPMC), then it was used in fast disintegrating tablets formulations by wet granulation method.
In this study an excipient coprocess was made by combining of PPS suspension in water with of HPMC suspension in water at a ratio of 6: 1, then dried with drum dryer. The excipient product was characterized of physical properties. After that, it used in fast disintegrating tablets formulations. The process of making the tablets was by wet granulation method in 4 formula (ABCD formula). The fast disintegrating tablets product was evaluated physical properties which include hardness, friability, wetting time, disintegrating time, in accordance with the requirements of a good fast disintegrating tablets.
The results of the evaluation of the resulting tablets indicate only formula D that can be disintegrated in accordance with the European Pharmacopoeia, which is less than 3 minutes (88,16 ± 10,61second), beside that another properties were; hardness 1.73 ± 0.32 kp, friability ± 0.69 003, wetting time 142,66 ± 8.02 seconds. The conclusion is formula D eligible as fast disintegrating tablets, not only physical properties but also disintegrating time.
"
Depok: Fakultas Farmasi Universitas Indonesia, 2013
S45345
UI - Skripsi Membership  Universitas Indonesia Library
cover
Junaedi
"Penelitian ini bertujuan untuk membuat eksipien ko-proses dari campuran kappa dan iota karagenan pada perbandingan tertentu yang dikombinasi dengan pragelatinisasi pati singkong propionat (PPSP), selanjutnya mengkarakterisasi eksipien ko-proses dan menggunakannya dalam formulasi sediaan gastroretentif tablet mengapung.
Pada penelitian ini, tablet dibuat dengan metode granulasi basah dan menggunakan famotidin sebagai model obat. Formulasi tablet mengapung dibuat dengan eksipien koproses karagenan dan PPSP dengan perbandingan tertentu. Daya mengembang dan keterapungan tablet mengapung dievaluasi. Pelepasan obat dari tablet mengapung diteliti dan dianalisa dengan menggunakan beberapa model persamaan kinetika.
Hasil penelitian menunjukkan bahwa formula A dengan eksipien koproses karagenan : PPSP (1:1) sebanyak 60 % dengan HPMC 10% menghasilkan formula yang terbaik dengan waktu mengapung 11,42 ± 1,53 menit dengan lamanya keterapungan selama 20 jam. Formula tersebut juga menunjukkan profil pelepasan yang terkendali dengan model kinetika Higuchi serta mekanisme difusi non Fickian.

The aim of this study was to make a coprocess excipients from the mixture of kappa and iota carrageenan on specific comparisons, combined with the pregelatinized cassava starch propionate (PPSP) , further characterized the coprocess excipients and used the formulation in processed gastroretentif preparation of floating tablet.
In this study, tablets were made by wet granulation method and using famotidine as a model drug. Some formulations of floating tablets were prepared by varying the composition of the excipients coprossed carragenan with a certain ratio. The swelling and buoyancy of the floating tablets were evaluated. Furthermore, the drug release from the floating tablets were studied and analyzed using several models of kinetic equations.
The results showed that formula A with excipients coprocessed carragenan (1:1) as much as 60% with 10% HPMC produce the best formula and floating lag time 11.42 ± 1.53 minutes and total floating time for 22 hours. The formula also revealed a profile of controlled drug release and approached to Higuchi kinetics model and the non Fickian diffusion mechanism."
Depok: Fakultas Farmasi Universitas Indonesia, 2012
T31802
UI - Tesis Open  Universitas Indonesia Library
cover
Rida Cameli
"ABSTRAK
Film bukal merupakan alternatif bagi sediaan oral yang membutuhkan polimer pembentuk film dengan sifat mekanik dan mukoadesif yang baik. Penelitian ini bertujuan untuk mendapatkan eksipien koproses dari pragelatinisasi pati singkong fosfat PPSF dan karaginan dengan perbandingan terbaik; serta memformulasi dan mengkarakterisasi film bukal yang dibuat dari eksipien koproses tersebut. PPSF merupakan eksipien modifikasi dari pati singkong yang digelatinisasi sebagian dan kemudian fosforilasi pada kondisi basa pH 9-10 . Selanjutnya PPSF bersama karaginan dibuat menjadi eksipien koproses dengan perbandingan 1:1; 2:1; 3:1; dan 1:2. Hasil penelitian menunjukkan bahwa eksipien koproses PPSF-karaginan 1:1 memiliki sifat mukoadesif yang baik, dengan kekuatan mukoadesif 5,94 1.128 gF dan waktu mukoadesif 118,3 2,22 menit. Selanjutnya eksipien koproses PPSF-karaginan 1:1 tersebut digunakan sebagai pembentuk film bukal dengan salbutamol sebagai model obat. Karakteristik film bukal salbutamol yang dihasilkan yaitu ketebalan 11,23 0,21 m, kekuatan peregangan 0,18 N/mm2 dan elongasi 81,38 15,03 . Selain itu, pelepasan salbutamol sulfat dari film bukal mencapai 72,93 1,81 selama 19 menit. Dapat disimpulkan bahwa eksipien koproses PPSF-karaginan yang dihasilkan dapat digunakan sebagai eksipien pembentuk film bukal dengan pelepasan obat segera.

ABSTRACT
Buccal film is an alternative oral dosage form which is required film forming polymer with a good mechanical and mucoadhesive properties. The purposes of present study were to optimize the best ratio of pregelatinized cassava starch phosphate and carrageenan to obtain coprocess excipient, as well as formulate and characterize the film based on the coprocess excipent. Pregelatinized cassava starch phosphate PCSP is a physically and chemically modified excipient with partial gelatinization and phosphorylation in alkaline condition pH 9 10 . Then, PCSP was co processed with carrageenan in the ratio 1 1, 2 1 3 1, and 1 2. The results showed that tensile strength and mucoadhesion time of the coprocess excipient of PCSP Carrageenan 1 1 were 5.94 1.128 gF and 118.3 2.22 minutes, respectively. It revealed that the coprocess excipient had good mucoadhesive properties. Moreover, the coprocess excipient of PCSP Carrageenan 1 1 was used as film forming in buccal film formulation and salbutamol as a drug model. The resulted film had the thickness, the tensile strength, and the elongation were 11.23 0.21 m, 0.18 N mm2, 81.38 15.03 , respectively. Furthermore, the release profile of salbutamol sulfate from the films showed the fast release, which was 72.93 1.81 released during 19 minutes. It is concluded that the coprocess excipient of PCSP Carrageenan could be applied as an excipient of buccal film for immediate release purpose."
2013
T47481
UI - Tesis Membership  Universitas Indonesia Library
cover
Dini Utari
"Tujuan: Penelitian ini bertujuan untuk mengetahui faktor-faktor yang dapat meningkatkan akurasi tes IVA dalam mendeteksi lesi derajat tinggi kanker serviks.
Metode: Dua puluh lima subjek dilakukan pemeriksaan IVA, dimana didapatkan hasil IVA positif dan dinilai lima kriteria berdasarkan kecepatan muncul lesi, intensitas warna putih yang kuat, ketebalan lesi berbentuk plak, batas lesi yang tegas dan tepi lesi yang meninggi. Kemudian dilakukan biopsi pada lesi putih yang dihasilkan dan dilakukan pemeriksaan histopatologi. Hasil histopatologi dikelompokkan menjadi lesi derajat tinggi dan non lesi derajat tinggi.
Hasil: Penelitian ini diikuti oleh 25 wanita dengan hasil IVA positif Didapatkan NPP untuk kriteria kecepatan muncul lesi ≤60 detik, ketebalan lesi berbentuk plak, intensitas warna putih yang kuat, batas lesi yang tegas dan tepi lesi yang meninggi, adalah masing-masing sebesar 0,36; 0,33; 0,18; 0,2 dan 0,09. Apabila dua kriteria IVA positif dengan NPP tertinggi, yaitu kecepatan muncul lesi dan ketebalan lesi bentuk plak digabungkan, akan meningkatkan NPP menjadi 0,40.
Kesimpulan: Di antara lima kriteria IVA positif yang diuji pada penelitian ini, yang mempunyai nilai prediksi positif paling baik dalam mendeteksi lesi derajat tinggi adalah kriteria kecepatan munculnya lesi dan ketebalan lesi berbentuk plak.

Objective: To know the factors that can increase the accuracy of VIA tests in detecting high grade lesions.
Study design: Twenty-five subjects were performed VIA test with positive results, assessed further by five criterias based on speed of the lesion appear, strong white intensity of the lesions, thick lesions with plaque-shaped, firm-bordered lesions, and rised-edged lesions. Then punch biopsy and histopathology examination were conducted. Histopathology results grouped into high grade lesions and non-high grade lesions.
Results: This research followed by 25 woman with VIA positive results. Obtained PPV for five criterias: speed of lesions appear less than 60 seconds, strong white intensity of the lesions, the thickness of lesions with plaque-shaped, firm-bordered lesions, and rised-edged lesions were respectively 0.36; 0.33; 0.18; 0.2 and 0.09. If 2 criterias with best PPV, speed of lesions appear less than 60 seconds and the thickness of lesions with plaque-shaped, were combined, it will improve PPV to 0.40.
Conclusion: Among five criterias of VIA positive tested in the research, 2 criterias with best predictive values in detecting high grade lesions are speed of lesions appear less than 60 seconds and thick lesions with plaque-shaped.
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2013
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Pituanan, Baginda Sati
"Tablet cepat hancur merupakan tablet yang hancur dan / terlarut di dalam mulut sehingga dapat membantu pasien yang memiliki permasalahan dalam proses menelan. Ekstrak jahe dengan kandungan gingerol secara umum sudah dikenal dapat memberikan efek antiemetik. Tujuan penelitan ini adalah untuk memperoleh eksipien koproses pragelatinisasi pati singkong (PPS) dengan gom akasia (GA) yang kemudian digunakan sebagai eksipien dalam formulasi sediaan tablet cepat hancur ekstrak jahe. Pada penelitian ini, dibuat lima jenis eksipien koproses PPS-GA dengan lima perbandingan berbeda yaitu 5:5, 6:4, 7:3, 8:2 dan 9:1. Kelima eksipien koproses tersebut dilakukan karakterisasi meliputi bentuk partikel, distribusi ukuran partikel, kadar air, derajat keasaman, sifat alir, dan indeks mengembang. Selanjutnya, eksipien koproses PPS-GA 9:1, koproses PPS-GA 8:2 dan koproses PPS-GA 7:3 digunakan dalam formulasi sediaan tablet cepat hancur ekstrak jahe. Tablet cepat hancur ekstrak jahe yang diperoleh dievaluasi kekerasan, keregasan, waktu pembasahan dan waktu hancurnya. Hasil penelitian menunjukkan bahwa sifat alir dan daya mengembang eksipien koproses PPS-GA 9:1 lebih baik daripada eksipien koproses PPS-GA lainnya. Tablet cepat hancur ekstrak jahe yang menggunakan eksipien koproses PPS-GA 9:1 memiliki kekerasan 0,7 kp, keregasan 2,12 %, waktu pembasahan 93 detik dan waktu hancur 134 detik. Dapat disimpulkan bahwa eksipien koproses PPS-GA 9:1 memiliki potensi sebagai pengikat, penghancur dan pengisi dalam formulasi sediaan tablet cepat hancur.

Fast disintegrating tablets (FDTs) are tablet that disintegrate and/or dissolve rapidly in the mouth, hence it can help patients, who have problem of swallow drugs. Ginger extract, which is containing gingerol, generally has known acting as anti-emetic. The purposes of this study were to obtain coprocessed excipients of pregelatinized cassava starch (PCS) with acacia gum (AG), and then apply them in FDT formulations of ginger extract. In this research, five kinds of the coprocessed excipient of PCS-AG were prepared in the ratio of 5:5, 6:4, 7:3, 8:2, and 9:1. Furthermore, the coprocessed excipient of PCS-AG were characterized in term of morphology, particle size distribution, moisture content, pH, flow properties and swelling index. Moreover, the coprocessed excipients of PCS-AG 9:1, PCS-AG 8:2, and PCS-AG 7:3 were used in FDT formulation of ginger extract. In addition, the FDTs of ginger extract were examined for the tablet hardness, the tablet friability, the wetting time and the disintegration time. The results show that the coprocessed excipient of PCS-AG 9:1 was the selected excipient, since it revealed good flow properties and swelling index. The FDTs of ginger extract, which was using the coprocessed excipient of PCS-AG 9:1, had have the tablet hardness of 0,7 kp, the tablet friability of 2,12%, the wetting time of 93 seconds, and the disintegration time of 134 seconds. In conclusion, the coprocessed excipient of PCS-AG 9:1 might be a potential excipient as binder, disintegrant, and filler for the FDT formulation.
"
Depok: Fakultas Farmasi Universitas Indonesia, 2016
S65418
UI - Skripsi Membership  Universitas Indonesia Library
cover
Bhata Bellinda
"Mikroenkapsulasi merupakan proses penyalutan lapis tipis pada partikel zat yang membutuhkan suatu bahan penyalut dengan karakteristik yang sesuai. Tujuan penelitian ini adalah membuat eksipien koproses dari pragelatinisasi pati singkong (PPS) dan polivinil alkohol (PVA) yang digunakan sebagai bahan penyalut pada mikroenkapsulasi askorbil glukosida. Eksipien koproses dari PPS dan PVA dibuat dengan tiga perbandingan PPS:PVA yaitu 1:1, 1:2, dan 2:1, kemudian eksipien koproses PPS-PVA yang diperoleh dikarakterisasi. Eksipien koproses PPS-PVA selanjutnya digunakan sebagai bahan penyalut dengan konsentrasi 5% dalam mikroenkapsulasi askorbil glukosida dengan metode semprot kering. Pada penelitian ini dibuat tiga formula larutan penyalut yaitu formula 1 mengunakan eksipien koproses PPS-PVA 1:1, formula 2 mengunakan eksipien koproses PPS-PVA 1:2, dan formula 3 mengunakan eksipien koprosens PPS-PVA 2:1. Perbandingan askorbil glukosida dengan eksipien koproses PPS-PVA dalam formulasi mikrokapsul adalah 1:8. Hasil penelitian menunjukkan bahwa eksipien koproses PPS-PVA yang diperoleh menyerupai granul dengan morfologi permukaan yang kasar, kadar air 10 - 11%, pH 5,7 - 6,29, dan pada menit ke-15 sudah mengembang 4–6 kalinya. Mikrokapsul askorbil glukosida yang dimikroenkapsulasi dengan eksipien koproses PPS-PVA memiliki bentuk bulat dengan permukaan yang halus, dan adapula yang berbentuk kurang bulat dengan permukaan yang cekung. Selain itu, mikrokapsul askorbil glukosida yang dihasilkan memiliki efisiensi penjerapan 88,97%, 94,12% dan 94,21% berturut-turut untuk formula 1, formula 2 dan formula 3. Profil pelepasan askorbil glukosida dari mikrokapsul menunjukkan bahwa askorbil glukosida sudah dilepaskan seluruhnya (100%) pada menit ke-120, 180, dan 90 berturut-turut dari mikrokapsul formula 1, formula 2, dan formula 3. Dapat disimpulkan bahwa eksipien koproses PPS-PVA yang dihasilkan dapat digunakan sebagai bahan penyalut yang baik pada mikroenkapsulasi askorbil glukosida.

Microencapsulation is a film coating process of substance particles and requires a suitable coating material. The aim of this research was to produce co-processed excipient of pregelatinized cassava starch (PCS) and polyvinyl alcohol (PVA), which would be applied as coating material in microencapsulation of ascorbyl glucoside. Co-processed excipient of PCS-PVA was prepared in the ratio of PCS to PVA were 1:1, 1:2, and 2:1, then the produced PCS-PVA co-processed excipient was characterized. Moreover, co-processed excipient of PCS-PVA in concentration of 5% was used as coating material for spray dried microencapsulation of ascorbyl glucoside. In this study, three formula of coating solutions were prepared using co-processed excipient of PCS-PVA 1:1, 1:2 and 2:1 for formula 1, formula 2 and formula 3, respectively. The ratio of ascorbyl glucoside to co-processed excipient of PCS-PVA in microcapsules formula was 1:8. The results showed that the produced PCS-PVA co-processed excipient was like granules with rough surface morphology, 10-11% water content, pH 5.7 – 6.29 and swelled 4-6 fold during 15 minutes. Ascorbyl glucoside microcapsules which were encapsulated by co-processed excipient of PCS-PVA showed spherical form with smooth surface as well as irregular form with biconcave shape; both of the shapes were in the obtained microcapsules. In addition, entrapment efficiency of ascorbyl glucoside in the microcapsules of formula 1, formula 2 and formula 3 were 88.97%, 94.12% and 94.21%, respectively. Furthermore, release profile of ascorbyl glucoside from the microcapsules showed that ascorbyl glucoside was entirely released 100% from the microcapsules of formula 1, formula 2 and formula 3 at 120, 180 and 90 minutes, respectively. On the whole, it concluded that the co-processed excipient of PCS-PVA could be used as a good coating material for microencapsulation of ascorbyl glucoside."
Depok: Fakultas Farmasi Universitas Indonesia, 2013
S45624
UI - Skripsi Membership  Universitas Indonesia Library
cover
Indiah Ratna Dewi
"Recently, much attention has been focused on research to replace petroleum-based plasticizers, with biodegradable materials, such as biopolymer which offers competitive mechanical properties. In this study, castor oil was modified with maleic anhydride (MAH) to produce bioplasticizer named maleated anhydride castor oil (MACO), and used in nitrile butadiene rubber (NBR)/poly vinyl chloride (PVC) blend. The effect of MACO on its cure characteristics and mechanical properties of NBR/PVC blend has been determined. The reactions were carried out at different castor oil (CO)/xylene ratios, i.e. 1:0 and 1:1 by weight, and fixed CO/MAH ratio, 1:3 by mole. DOP, CO, and MACO were added into each NBR/PVC blend according to the formula.
It was found that the viscosity and safe process level of NBR/PVC blend is similar from all plasticizer, however, MACO (1:0) showed the highest cure rate index (CRI). MACO-based plasticizer gave a higher value of the mechanical properties of the NBR/PVC blend as compared to DOP based plasticizer. MACO (1:1) based plasticizer showed a rather significance performance compared to another type of plasticizers both before and after aging. The value of hardness, elongation at break, tensile strength, and tear strength were 96 Shore A, 155.91 %, 19.15 MPa, and 74.47 MPa, respectively. From this result, NBR/PVC blends based on MACO plasticizer can potentially replace the DOP, and therefore, making the rubber blends eco-friendly."
Center for Leather, 2016
530 KKP 32:1 (2016)
Artikel Jurnal  Universitas Indonesia Library
cover
Mega Syintia
"ABSTRACT
Label indikator kolorimetrik telah banyak dikembangkan dari segi material maupun aplikasinya. Pendeteksian uap asam asetat dengan label indikator kolorimetrik didasarkan pada perubahan warna label yang terjadi akibat interaksi uap asam asetat dengan zat warna. Label dibuat dengan menggunakan ekstrak beras hitam dan bunga kangkung laut yang diimobilisasikan pada substrat kertas. Jenis ekstrak dan substrat, kosentrasi asam asetat 20, 40, 60, 80 dan 100, pH larutan 9 dan 13, dan waktu pendeteksian menjadi variabel yang akan divariasikan pada pengujian label dengan uap asam asetat. Rentang perubahan warna akibat kenaikan pH pada larutan ekstrak bunga kangkung laut lebih luas dibandingkan ekstrak beras hitam, yang mencakup seluruh spektrum warna cahaya tampak. Jenis label yang memiliki respons perubahan warna yang paling terlihat jelas adalah label dari substrat Kalkir dan ekstrak bunga kangkung laut yang dikondisikan pada pH 9. Warna label ini berubah dari hijau menjadi kemerahan setelah dipaparkan pada uap asam asetat. Perubahan warna akan semakin merah dan semakin cepat seiring kenaikan kosentrasi. Hasil pengujian stabilitas warna label menunjukan bahwa label baik disimpan di suhu rendah dan pada kelembaban relatif 55.

ABSTRACT
The indicator label based on the colorimetric method has been widely developed in terms of both materials and applications. The detection of acetic acid vapor using colorimetric indicator label is based on color change results from the interaction of acetic acid vapors with the dyes. Labels are made using black rice extract and morning glory flowers immobilized into paper substrate. Variables varied in this measurement are extract sources, substrate types, acetic acid concentrations 20, 40, 60, 80 and 100, solution pH 9 and 13, and detection time. The ranges of color change due to the increase in pH of the morning glory flower extract solution are wider than the black rice extract solution, which covers the entire visible color spectrum. It was observed that the type of label that has the most noticeable color change response is a label made from tracing paper and a morning glory flower extract conditioned at pH 9. The color of this label changes from green to reddish green after exposure to acetic acid vapors. Color changes will accelerate and become redder along with the increase in concentration of acetic acid solution. The result of labels color stability test indicates that the label is well kept at low temperature and at 55 relative humidity."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>