Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 195727 dokumen yang sesuai dengan query
cover
Bismi Annisa
"Kondisi eksisting sistem pengelolaan sampah di TPA Cipayung, Depok berupa penerimaan, pencatatan, penataan dan pemadatan sampah di kolam sampah. MFA (Material Flow Analysis) yang dibentuk melalui model kesetimbangan massa STAN (short for subSTance flow ANalysis) versi 2.0 digunakan untuk menganalisa aliran material serta pengaruh recycle dan recovery sampah pada sistem TPA Cipayung. Skenario paling tepat mereduksi jumlah sampah yang masuk ke TPA Cipayung untuk ditimbun serta memperpanjang umur layan TPA adalah skenario 3 (optimalisasi dan penambahan jumlah UPS Hanggar TPA Cipayung untuk pengomposan, peningkatan pemilahan dan pemberdayaan sampah di kolam sampah untuk daur ulang serta bahan baku RDF/Refuse Derived Fuel).

The existing condition of solid waste management system at TPA Cipayung, Depok be matter of receiving, recording, structuring and compacting waste in landfill. MFA (Material Flow Analysis) be built in the mass balance model STAN (short for subSTance flow ANalysis) version 2.0 used to analyze the material flow and the influence of solid waste recycle and recovery at TPA Cipayung system. The most appropriate scenario for reducing the amount of waste which enter into TPA Cipayung, Depok to be dumped as well as extend the life span of the landfill is scenario 3 (optimization and addition of UPS Hanggar TPA Cipayung for composting, increase the waste separation and empowerment at landfill for recycling also RDF/ Refuse Derived Fuel raw material)."
Depok: Fakultas Teknik Universitas Indonesia, 2013
T32918
UI - Tesis Membership  Universitas Indonesia Library
cover
Mohamad Fauzi Rachman
"Lindi merupakan cairan yang terbentuk oleh adanya air hujan yang merembes ke dalam timbunan sampah. Konsep keseimbangan air digunakan untuk menentukan timbulan lindi di suatu TPA. Dalam penentuan timbulan lindi, nilai field capacity (FC) sampah merupakan salah satu parameter yang menentukan terhadap banyaknya lindi yang terbentuk. Pemodelan lysimeter dalam penelitian ini dilakukan untuk mengetahui pengaruh resirkulasi lindi terhadap nilai FC sampah. Perhitungan nilai FC sampah skala laboratorium dilakukan dengan membandingan berat atau volumetrik air dengan berat atau volumetrik sampah pada lysimeter. Nilai FC sampah yang didapatkan selanjutnya digunakan untuk menghitung perkolasi lindi yang dihasilkan di TPA Cipayung selama setahun dengan menggunakan Metode Neraca Air Thornthwaite. Sampah pada penelitian ini diambil dari Pasar Kemiri Muka Depok. Penambahan asupan air sebagai simulasi air hujan dan terjadinya kebocoran pada lapisan geotekstil pada kedua lysimeter sebesar 1,4 L. Air lindi yang diresirkulasikan pada lysimeter 1 adalah 1,5 L. Penelitian ini menjadi penting dilakukan, karena dapat digunakan sebagai dasar pertimbangan untuk evaluasi pengolahan lindi yang ada di TPA Cipayung,terutama dalam hal penentuan potensi timbulan lindi dari landfill.
Hasil pemeriksaan menunjukkan bahwa nilai kadar air sampah awal pada lysimeter terbilang tinggi, yaitu sebesar 80,6 %. Nilai FC sampah pada lysimeter 1 yaitu sebesar 0,592 L/kg atau 59,2 % atau 276,53 mm/m, sementara pada lysimeter 2 nilainya adalah 0,449 L/kg atau 44,9 % atau 442,93 mm/m. Semakin tinggi nilai FC sampah, maka jumlah timbulan lindi menjadi kecil dan sebaliknya apabila nilai FC sampah kecil, timbulan lindi semakin besar. Total perkolasi lindi di TPA Cipayung selama setahun menggunakan nilai FC dari sampah pada lysimeter dengan resirkulasi lindi (lysimeter 1) adalah sebesar 1.210 mm. Total perkolasi menggunakan nilai FC dari sampah dengan lysimeter tanpa resirkulasi (lysimeter 2) adalah sebesar 1.211 mm. Tidak terlihat perbedaan nilai perkolasi lindi di TPA Cipayung dari bulan Januari-Agustus dan dari bulan Oktober-Desember. Perbedaan nilai perkolasi hanya terjadi pada bulan September yaitu sebesar 38 mm bila dengan menggunakan resirkulasi lindi dan 39 mm bila tanpa resirkulasi lindi). Hal tersebut dikarenakan data curah hujan, temperatur, dan koefisien run-off yang digunakan pada kedua lysimeter mempunyai nilai yang sama. Selain itu, adanya perbedaan ketinggian sampah pada kedua lysimeter yang mencapai 0,32 m diduga turut mempengaruhi besarnya hasil perkolasi lindi pada hasil perhitungan ini. Perlu adanya keseragaman susunan lapisan (capping) di dalam seluruh lysimeter, sehingga hasil yang didapat bisa lebih dibandingkan.

Leachate is a liquid that is formed by the rain water that seeps into the waste heap. The concept of the water balance is used to determine the generation of leachate in a landfill. In determining the leachate generation, the value of field capacity (FC) of waste can be used as one of the parameters. Lysimeter simulation is conducted to determine the effect of leachate recirculation to FC value. The value of FC is calculated by comparing between the water weight or volume with the waste weight or volume in the lysimeter. Furthermore, the value of FC is utilized to calculate leachate generated at Cipayung Landfill within a year by using Thornthwaite Water Balance Method. Solid waste that is utilized in this study was taken from Kemiri Muka traditional market-City of Depok. The amount of additional water into lysimeter is based on the amount of rainfall (precipitation) in Depok and the assumption of leakage rate of geotextile layer on the top of both lysimeter. Thus, 1.4 liter of water is supplied into both lysimeter and additional 1.5 liter of leachate supplied into one of lysimeter as leachate recirculation.Lysimeter 1 is appointed as lysimeter with leachate recirculation and lysimeter 2 is as lysimeter without leachate recirculation. This research is important because it can be used as a basis for evaluation on the existing leachate treatment at Cipayung Landfill especially in estimating of leachate quantity that is coming from landfill.
The results showed that the initial moisture content of waste in the lysimeter is approximately 80.6%. The value of FC of waste in lysimeter 1 and 2 is approximately 0.592 L/kg or 59.2% or 276.53 mm/m and 0.449 L/kg or 44.9% or 442.93 mm/m, respectively. The higher the value of FC of waste, the lower the amount of leachate volume generated, and vice versa. Total percolation of leachate at Cipayung Landfill within a year by using these both FC values is 1,210 mm with leachate recirculation and 1,211 mm without leachate recirculation. No visible difference in the amount of leachate percolation at Cipayung Landfill during January to August and October to December. The difference only occurred in September, which is 38 mm and 39 mm by using and not using leachate recirculation, respectively. These results took place due to the same value of rainfall and temperature data, and also the run-off coefficient that is utilized in both calculations. In addition, the difference in waste height on both lysimeter that reached 0.32 m supposedly influenced the amount of leachate generated. Therefore, for the next research, the entire lysimeter should be made on the same condition to obtain good and comparable results."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S46285
UI - Skripsi Membership  Universitas Indonesia Library
cover
Khairu Annisa Hariadi
"Life Cycle Assessment merupakan analisa aliran material yang dapat digunakan untuk memodelkan aliran material pada sistem pengolahan limbah padat. Studi dilakukan pada limbah padat TPA Cipayung, Kota Depok dengan jumlah limbah padat masuk rata-rata adalah 546,70 ton/hari atau 199.544,76 ton/tahun dengan potensi emisi gas rumah kaca yang dihasilkan 392.425,53 ton CO2e/tahun. Skenario pengolahan limbah padat dilakukan untuk mengurangi potensi emisi gas rumah kaca yang dihasilkan, yaitu skenario kondisi eksisting, skenario perbaikan kondisi eksisting, dan skenario pengolahan sampah untuk masa yang akan datang pada tahun 2030. Rekomendasi pengolahan limbah padat untuk dapat mengurangi potensi emisi gas rumah kaca yang dihasilkan adalah dengan pengomposan, daur ulang, dan Refuse Derived Fuel RDF . Pada pemodelan skenario tersebut diperoleh bahwa potensi emisi gas rumah kaca yang dihasilkan pada kondisi eksisting dapat dikurangi hingga 37 yakni menjadi 246.697,87 ton CO2e/tahun. Pada tahun 2030, emisi gas rumah kaca yang dihasilkan pada pengolahan limbah padat yang direkomendasikan meningkat 3,4 dari potensi emisi gas rumah kaca tahun 2016 yakni sebanyak 407.729,55 ton CO2e/tahun dengan jumlah limbah padat yang masuk meningkat 34 dari jumlah sampah tahun 2016.

Life cycle assessment is material flow analysis can be used to design material 39 s flow in waste processing of municipal solid waste. The research was done by waste in TPA Cipayung, Depok City with average amount input of waste 546.70 ton day or 199,544.76 ton year with greenhouse gas emissions potency that is produced 392,425.53 ton CO2e year. The waste processing scenario is made to reduce greenhouse gas emissions potency that is produced, such as exsisting condition scenario, exsisting condition improvement scenario, and waste processing scenario for the future in 2030. The recommendation of waste processing to reduce greenhouse gas emissions potency that is produced with composting, recycle, Refuse Derived Fuel RDF . In this scenario model conclude greenhouse gas emissions potency which is produced in exsisting condition can be reduced until 37 or 246,697.87 ton CO2e year. In 2030, greenhouse gas emissions potency that will be produced in recommended waste processing increase 3.4 from the greenhouse gas emissions potency in 2016 amount 407,729.55 ton CO2e year with total input waste amount increase 34 from total waste amount in 2016."
Depok: Fakultas Teknik Universitas Indonesia, 2017
T47848
UI - Tesis Membership  Universitas Indonesia Library
cover
Anugrah Juwita Sari
"Komposisi sampah TPA Cipayung terdiri dari 11,972% komponen plastik. Pada kenyataannya tidak semua sampah plastik dapat diproses, hanya sampah plastik dengan kondisi baik yang dapat didaur ulang. Dengan demikian, sampah yang akan ditimbun di TPA Cipayung banyak mengandung komponen yang sulit terurai seperti plastik. Pemanfaatan sampah TPA Cipayung sebagai refuse derived fuel (RDF) akan mengurangi beban TPA Cipayung dan memperpanjang umur tampung sampah. Perlu dilakukan penelitian lebih lanjut apakah sampah TPA Cipayung berpotensi sebagai bahan baku RDF.
Oleh karena itu, penelitian ini bertujuan untuk mengetahui untuk komposisi dan karakteristik fisik dan kimia sampah TPA Cipayung dan besarnya potensi energi dari sampah TPA Cipayung serta potensi sampah di TPA Cipayung yang dapat dimanfaatkan sebagai bahan baku RDF. Karakteristik fisik yang diteliti adalah berat jenis. Karakteristik kimia yang diteliti adalah kadar air, kadar volatil, kadar abu, dan nilai kalori (calorific value). Karakteristik kimia yang diteliti mengacu kepada analisis proksimat yaitu analisis untuk komponen combustible dalam sampah. Metode pengujian kadar air mengacu pada SNI 03-1971-1990, kadar volatil mengacu pada Standard Method 2540 E dan kadar abu mengacu pada ASTM E 830-87.
Hasil penelitian menunjukkan bahwa komposisi sampah TPA Cipayung terdiri atas 28,475% plastik; 4,275% kertas dan karton; 3,938% tekstil; 0,676% karet dan kulit; 1,619% kayu; 0,468% kaca; 0,115% logam; 6,050% diapers dan pembalut; 54,014% organik; dan 0,371% lain-lain. Potensi energi sampah TPA Cipayung (komponen combustible) sebesar 3.576,99-4.787,10 kCal/kg dan sampah di TPA Cipayung yang berpotensi untuk dimanfaatkan sebagai bahan baku RDF secara berurut dari yang memiliki nilai kalori terbesar adalah karet dan kulit dengan nilai kalori 6.992 kCal/kg, plastik dengan nilai kalori 5.491,5 kCal/kg, kayu dengan nilai kalori 3.075,5 kCal/kg, tekstil dengan nilai kalori 2.616 kCal/kg, dan kertas dan karton dengan nilai kalori 2.402,5 kCal/kg. Namun, hasil penelitian juga menunjukkan bahwa kadar air sampah cukup tinggi, yaitu sebesar 51,18%, sehingga perlu dilakukan pre-treatment untuk mengurangi kandungan air dalam sampah untuk meningkatkan kualitas sampah dan dapat dimanfaatkan sebagai bahan baku RDF.

Solid waste in TPA Cipayung consists of 11,972% plastic. In fact, not all plastic waste can be processed, only those which have good quality which can be recycled. It causes solid waste in TPA Cipayung consists of non-biodegradable components, such as plastic. Solid waste can be utilized as refuse derived fuel (RDF) that can reduce the amount of the loading to TPA Cipayung and extend the using time of TPA Cipayung. It needs to be determined whether the solid waste of TPA Cipayung can be used as RDF's raw material. Therefore, the goal of this study are to determine the composition, physical and chemical properties and energy potential of solid waste at TPA Cipayung and also the potential of solid waste at TPA Cipayung that can be used as RDF raw material.
This study determines the physical and chemical properties of solid waste; those are density, moisture, volatile, and ash content, and also calorific value. The chemical properties refer to proximate analysis which is the analysis for the combustible components of solid waste. The testing method of moisture, volatile, and ash content based on SNI 03-1971-1990, Standard Method 2540 E, and ASTM E 830-87 respectively.
This results show that solid waste at TPA Cipayung contains 28,475% of plastic; 4,275% of paper and cardboard; 3,938% of textile; 0,676% of rubber and leather; 1,619% of wood; 0,468% of glass; 0,115% of metal; 6,050% of sanitary napkin; 54,014% of organic; and others 0,371%. The energy potential of solid waste in TPA Cipayung (combustible components) is 3.576,99-4.787,10 kCal/kg. The components that have potential as the raw material of RDF are rubber and leather (6.992 kCal/kg), plastic (5.491,5 kCal/kg), wood (3.075,5 kCal/kg), textile (2.616 kCal/kg), paper and cardboard (2.402,5 kCal/kg). However, the moisture content in solid waste is high that is approximately 51,18%. Therefore, this high must be reduce to increase its potential as RDF raw material.
"
Depok: Fakultas Teknik Universitas Indonesia, 2012
S42793
UI - Skripsi Open  Universitas Indonesia Library
cover
Fajar Agung Kurniawan
"Salah satu permasalahan lingkungan hidup kota Depok adalah kondisi TPA Cipayung telah mengalami overload dalam menampung sampah Kota Depok. Maka dari itu, Pemerintah Kota Depok membangun unit pengolahan sampah UPS sebagai upaya pengelolaan sampah, salah satunya adalah UPS TPA Hanggar 4. Untuk mengetahui kinerja UPS tersebut, perlu dilakukan suatu studi mengenai efektivitas dan efisiensi berkaitan proses kerja di UPS tersebut. Tujuan dari penelitian ini adalah 1 mengidentifikasi proses kerja 2 mengidentifikasi aliran material 3 menganalisis faktor-faktor yang memengaruhi efektivitas, dan 4 menganalisis faktor-faktor yang memengaruhi efisiensi UPS TPA Hanggar 4. Penelitian ini merupakan penelitian ex-post facto yang meneliti hubungan sebab-akibat yang tidak diberi perlakuan oleh peneliti ataupun dimanuplasi dan penelitian eksperimental dilakukan dengan percobaan di lapangan dan percobaan di laboratorium. Pengambilan data dilakukan dengan observasi, wawancara, serta pengujian laboratorium. Hasil dari penelitian ini menunjukkan bahwa proses kerja UPS TPA Hanggar 4 terdiri dari pengangkutan sampah, proses pemilahan, proses pencacahan, proses pengomposan dengan open windrow, proses pengayakan, dan proses pengemasan/penyimpanan, aliran material kinerja. Berdasarkan perhitungan aliran material, dengan jumlah sampah yang masuk ke UPS sebanyak 24.867 kg, jumlah sampah organik yang dikomposkan adalah 24.465 kg 98,58 dan jumlah sampah anorganik yang dibuang ke TPA Cipayung sebanyak 402 kg 1,62 serta jumlah kompos yang dihasilkan 7.339,5 kg 29,52. UPS ini efektif untuk mengurangi sampah yang dibuang ke TPA sebanyak 97,88 0,585 dari sampah yang masuk ke UPS. Kompos yang dihasilkan memenuhi 4 parameter pada SNI 19-7030-2004 dan 2 parameter pada Peraturan Menteri Pertanian No.70 Tahun 2011. Berdasarkan pemenuhan kriteria teknis, UPS ini telah memenuhi 4 dari 5 kriteria pada Peraturan Menteri PU RI No. 3 Tahun 2013 dan memenuhi 5 dari 5 kriteria pada Peraturan Daerah Kota Depok No.5 Tahun 2014. UPS TPA Hanggar 4 telah telah memenuhi 62,17 dari kapasitas desain. Dari aspek efisiensi, laju pemulihan sampah pada UPS ini adalah 94,71 dan laju daur ulang yaitu 0,25 sehingga cocok untuk proses pengomposan namun memiliki tingkat efisiensi yang rendah dalam pelaksanaan waktu kerja oleh kelompok pekerja, yaitu hanya sebesar 64,83 dari waktu kerja per hari.

One of the waste management issues in Depok City is TPA Cipayung rsquo s capacity has been exceeded. To overcome the problem, Depok City Government built Material Recovery Facility MRF, and one of them is UPS TPA Hanggar 4. To determine the MRF performance, it is necessary to do a research on the effectiveness and efficiency of the work process. The objectives of this research are 1 to identify work process 2 to identify the material flow 3 to analyze the factors affecting the effectiveness and 4 to analyze the factors affecting the efficiency rate of TPA Hanggar 4 Cipayung. This research is an ex post facto research that examine causal relationships that are not treated by researchers or manipulated and experimental research conducted by field experiments and laboratory experiments. The data were collected by observation, interview, and laboratory experiments. The results of this research show that the work process of UPS TPA Hanggar 4 consists of waste transportation, sorting process, shredding process, open windrow composting, sieving process, and packaging storage process. Based on the calculation of material flow, with the amount of waste input to UPS is 24,867 kg, the amount of composted organic waste is 24,465 kg 98,58, the amount of inorganic waste disposed to TPA Cipayung is 402 kg 1,62, and the amount compost produced is 7.339,5 kg 29.52. UPS is shown effective to reduce waste disposed to landfill as much as 97,88 0,585 from the waste input amount. The compost produced fulfills 4 parameters in SNI 19 7030 2004 and 2 parameters in Minister of Agriculture Regulation No.70 of 2011. Based on the fulfillment of technical criteria, UPS has fulfilled 4 of 5 criterias in Minister of Public Works Regulation RI No. 3 of 2013 and 5 of 5 criterias in Depok City Regional Regulation No.5 of 2014. UPS TPA Hanggar 4 has fulfilled 62.17 of the design capacity. From the efficiency aspect, the recovery rate of waste is as high as 94.71 and the recycling rate is 0.25, making it suitable for the composting process but has low efficiency rate in the implementation of working time by the worker group, that is only 64.83 of working time per day."
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Abraham Mulia
"Perubahan pola konsumsi dan pertumbuhan jumlah penduduk akan mengakibatkan makin beragamnya jenis sampah maupun peningkatan jumlah timbulan sampah yang dihasilkan. TPA merupakan tempat untuk memproses dan mengembalikan sampah menuju lingkungan. TPA Galuga merupakan TPA yang masih menggunakan metode open dumping dan dikelola oleh 2 pemerintah daerah yang berbeda yaitu Kota Bogor dan Kabupaten Bogor. Pada penelitian ini lebih berfokus kepada TPA yang dikelola oleh Kabupaten Bogor yang mempunyai jumlah penduduk yang cukup besar. Oleh karena itu penelitian ini bertujuan untuk mengetahui timbulan sampah, mengetahui komposisi sampah, dan mengetahui sistem pengelolaan sampah yang ada di TPA Galuga Kabupaten Bogor. Sampel pada penelitian ini adalah sampah perumahan yang terdapat pada angkutan dan sistem pengelolaan sampah. Pengumpulan data dilakukan dengan survey dan studi litelatur. Teknis analisis data yang digunakan adalah analisis Load-count analysis. Pada penelitian ini didapatkan hasil dari karakteristik komposisi sampah TPA Galuga Kabupaten Bogor sebesar plastik 14%, logam 0,003%, kertas/karton 13%, sampah makanan 65%, kain 0,69%, dan kaca 0,078 % dan lainnya 5,79% lalu untuk rata-rata volume timbulan sampah sebesar 899,34 m3/hari. Sistem pengelolaan sampah pada Kabupaten Bogor terdapat penerimaan sampah, pembongkaran sampah, perataan/pemadatan sampah, dan belum terdapat pengelolaan sampah setelah itu

Changes in consumption patterns and population growth will result in more diverse types of waste and an increase in the amount of waste generated. TPA is a place to process and return waste to the environment. TPA Galuga is a landfill that still uses the open dumping method and is managed by 2 different local governments, namely Bogor City and Bogor Regency. This study focuses more on the TPA managed by Bogor Regency which has a fairly large population. Therefore, this study aims to determine the generation of waste, to determine the composition of the waste, and to know the waste management system in TPA Galuga, Bogor Regency. The sample in this study is residential waste contained in the transportation and waste management system. Data was collected by means of surveys and literature studies. The data analysis technique used is load-count analysis. In this study, the results obtained from the characteristics of the composition of waste at the Galuga TPA, Bogor Regency, amounting to 14% plastic, 0.003% metal, 13% paper/cardboard, 65% food waste, 0.69% cloth, and 0.078 % glass and 5.79% others. for the average volume of waste generation is 899.34 m3/day. The waste management system in Bogor Regency includes receiving waste, disposing of waste, compacting waste, and there is no waste processing after that."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Vincent
"Analisis dan Optimasi Kinerja Bank Sampah dan Unit Pengolahan Sampah UPS Dalam Pengelolaan Sampah di Kelurahan Beji Depok. Timbulan sampah Kota Depok terus meningkat akibat pertumbuhan penduduk yang meningkat setiap tahunnya. Peningkatan timbulan sampah membuat kondisi TPA Cipayung tidak mampu lagi menampung sampah yang dihasilkan oleh penduduk Kota Depok. Upaya yang dilakukan pemerintah Kota Depok dalam menangani hal tersebut adalah dengan membangun UPS Unit Pengolahan Sampah. Kondisi tersebut juga menggerakkan masyarakat untuk membangun bank sampah sebagai solusi dari permasalahan tersebut.
Penelitian ini bertujuan untuk mengetahui nilai recycling rate dan recovery rate dari bank sampah dan UPS serta timbulan dan karakteristik sampah di Kelurahan Beji. Selain itu dilakukan pula peninjauan manfaat ekonomi langsung dari dua model pengelolaan sampah yaitu bank sampah dan UPS serta optimasi kedua model pengelolaan tersebut dengan menggunakan analisis SWOT. Pengambilan data pada penelitian ini dilakukan dengan melakukan pengukuran timbulan dan komposisi sampah yang sesuai dengan SNI 19 3964 1994 serta menggunakan data sekunder yang diperoleh dari penelitian sebelumnya ataupun yang berasal dari para stakeholder yang bersangkutan.
Penelitian ini memberikan hasil berupa nilai recycling rate dan recovery rate dari bank sampah yang nilainya sama yaitu 0 17 Nilai recycling rate dan recovery rate dari UPS adalah sebesar 7 7 dan 53. Keuntungan dari penjualan material daur ulang oleh bank sampah adalah sebesar Rp 4 055 560 00 tahun sedangkan perhitungan keuntungan penjualan material daur ulang di UPS tidak dilakukan. Melalui optimasi secara analisis SWOT diperoleh strategi S O yang disarankan untuk mengoptimasikan kedua jenis pengolahan sampah tersebut. Pengurangan sampah yang masuk ke TPA dapat dilakukan dengan meningkatkan participation rate dari bank sampah dengan melakukan sosialisasi ke masyarakat. Hasil penelitian menunjukkan bahwa pengolahan sampah di UPS dengan batas maksimal 30m3 hari juga dapat membantu mengurangi sampah yang masuk ke TPA.

Analysis and Optimization of Waste Bank and Material Recovery Facility Performance In Solid Waste Management at Beji Sub district City of Depok. The amount of waste in Depok is undoubtedly increasing each passing year in line with the growing number of its population. This leads to the insufficiency of space in Cipayung landfill site In order to solve the problem of insufficient space the local government has developed a unit named MRF. Meanwhile the community is attempting to build a waste bank on their own to reduce their own waste.
The objectives of this research are to determine the value of recycling rate and recovery rate of waste banks and MRF as well as waste characteristics in Beji sub district. Moreover this research also attempts to observe direct economic benefits along with the optimalization of the two models through SWOT analysis. The data of this research were collected through the measurement of waste generation and composition in accordance with SNI 19 3964 1994.
This research revealed that the value of recycling rate and recovery rate is 0 17 for waste bank while the value for MRF is 7 7 and 53. The profit gained through the sale of recycled materials from waste bank is approximately Rp4 055 560 00 year However the sale for MRF is not calculated. The S O strategy gained through SWOT analysis could be used to optimalize both models. Furthermore the reduction of waste in landfill site could be achieved by increasing the participation rate of waste bank supported by the socialization to the community. The research showed that the waste processing in MRF with the maximum value of 30m3 day was able to reduce the amount of waste in the landfill site.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52384
UI - Skripsi Membership  Universitas Indonesia Library
cover
Hirobi Kafka Iswara
"Berdasarkan penelitian sebelumnya, pada tahun 2012, jumlah sampah yang dihasilkan di TPA Cipayung sebesar 128.048,1 kg/hari dengan komposisi sampah yang didominasi oleh sampah organik (63,59%) dan anorganik (36,41%). Sampah anorganik terdiri dari 26,70% sampah anorganik recyclable  dan 9,70% sampah anorganik non-recyclable, termasuk plastik yang tidak dapat didaur ulang. Konteks dari “sampah recyclable” dalam skripsi ialah sampah yang memiliki nilai ekonomi bagi pemulung. Penelitian ini bertujuan untuk mengurangi sampah anorganik yang un­­-recyclable tanpa harus menghambat sumber pendapatan utama pemulung. Adapun metode yang digunakan dalam penelitian ini adalah adalah SNI 19-3964-1994 selama 8 hari untuk menentukan komposisi sampah plastik yang tidak memiliki nilai jual. Hasil penelitian menunjukkan bahwa komposisi sampah plastik yang tidak memiliki nilai jual ialah sebesar 23,6% dengan komposisi sampah plastik multilayer (PP, LDPE, dan lembaran aluminium), PS, dan Mika PVC, dengan rasio 81% plastik multilayer, 10% PS, dan 9% Mika PVC. Pirolisis digunakan untuk memproses sampah plastik un-recyclable dengan hasil yang ditemukan ialah 5,3% cairan, 0,3% arang, dan 94,34% gas dari 6 g sampel. Studi ini memaparkan kebutuhan akan metode pengolahan sampah yang efektif untuk meminimalisir sampah anorganik yang tidak dapat didaur ulang dengan memanfaatkan metode pirolisis.

Based on previous research, in 2012, the amount of waste generated in Cipayung Landfill was 128,048.1 kg/day with a waste composition dominated by organic waste (63.59%) and inorganic waste (36.41%). The inorganic waste includes 26.70% recyclable inorganic waste and 9.70% non-recyclable inorganic waste, including non-recyclable plastics. This study aims to reduce non-recyclable inorganic waste without interfering with scavenger’s main income source. The standard and method used for this paper was SNI 19-3964-1994 for 8 days to determine the composition of non-value plastic waste. It was found that the composition of plastic waste that has no price value is 23.6% with composition consisted of multilayer plastic waste (PP, LDPE, and aluminum sheets), PS, and PVC Mica, with a ratio of 81% multilayer plastic, 10% PS, and 9% PVC Mica. Pyrolysis was used to process the non-recyclable plastic waste, yielding 5.3% liquid, 0.3% char, and 94.34% gas from a 6 g sample. The study highlights the need for effective waste treatment methods to minimize non-recyclable inorganic waste by utilizing pyrolysis method."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Farizan Fathur Rachman
"Keberadaan Tempat Pemrosesan Akhir TPA Sampah dapat menghasilkan cairan lindi. Dalam cairan lindi, seringkali ditemukan kontaminan dengan kadar yang melebihi batas atas yang ditentukan. Hal ini menunjukkan adanya potensi terjadinya masalah kesehatan masyarakat jika cairan lindi tersebut dapat mencemari sumber air tanah yang digunakan sebagai sumber air minum bagi penduduk. Salah satu kontaminan yang pada penelitian-penelitian sebelumnya ditemukan dalam air tanah sekitar TPA Sampah dengan kadar yang tidak memenuhi baku mutu adalah besi Fe. Walaupun besi termasuk zat esensial bagi tubuh, konsumsi besi dalam jumlah berlebih dapat menimbulkan efek toksik. Metode penelitian yang digunakan adalah analisis risiko kesehatan lingkungan. Metode ini memungkinkan peneliti melakukan estimasi tingkat risiko kesehatan akibat pajanan besi melalui air tanah yang diminum oleh penduduk. Lokasi penelitian adalah pemukiman sekitar TPA Sampah Cipayung, Kelurahan Cipayung, Kota Depok dengan total jumlah sampel adalah 110 sampel. Teknik pengambilan sampel adalah Purposive sampling. Sampel manusia terdiri dari kriteria inklusi berupa penduduk berusia lebih dari 17 tahun dan sudah bermukim minimal satu tahun serta menggunakan air tanah sebagai sumber air minum utama. Sampel lingkungan berupa air tanah/sumur siap minum dari setiap rumah responden. Pengambilan data meliputi wawancara, pengukuran antropometri, dan pengambilan sampel air. Sampel air tersebut selanjutnya dianalisis di laboratorium untuk parameter besi Fe. Hasil penelitian menunjukkan rata-rata nilai konsentrasi besi Fe dalam air tanah masih memenuhi baku mutu yang berlaku. Rata-rata nilai berat badan dan asupan besi masih berada di bawah nilai yang direkomendasikan. Tingkat risiko pada durasi realtime dan lifespan adalah 0.001959 dan 0.005011. Baik secara kolektif maupun individual, tingkat risiko penduduk Kelurahan Cipayung sekitar TPA Sampah terhadap risiko kesehatan akibat pajanan besi Fe melalui air tanah yang diminum adalah aman/tidak berisiko.

Muncipal Solid Waste landfill can produce leachate. In leachate, it is often found various contaminant with amount that exceeding maximum limit value. It shows that there are possibilities of public health problem to occur if the leachate contaminate the groundwater that is used as a primary source of drinking water. Iron is one of contaminants that has already proven in previous research that its concentration in groundwater around Municipal Solid Waste Landfill doesnt meet the quality standard. Eventhough iron is essentially needed by the body, it can pose some toxic effects if it is consumed at the high dose. The design of this study is environmental health risk assessment. By this study design, the researcher become able to estimate the health risk due to iron exposure in drinking groundwater by the population. The study area is resident area around Cipayung municipal solid waste landfil, Depok city with amount of total sample is 110 samples. The sampling technique used in this research is purposive sampling. The inclusi criterias for human samples are the ones who have age 17 y.o., the ones who have lived there for at least one year, and the one who use groundwater as primary source of their daily drinking water. The environmental samples are the ready to drink groundwater from every single respondent. The data are collected by interview, anthropometry measurement, and collecting water samples. Then, the water samples are brought to the laboratorium for analyzing concentration of Fe in the groundwater. The results of the study show that the mean value of iron concentration in groundwater is meet the quality standard. The mean value of weight body and iron intake are less than the minimum recommended value. Value of RQrealtime is 0.001959. The value of RQlifespan is 0.005011. It shows that, the level of risk in population near the Municipal Solid Waste Landifll by iron exposure through drinking groundwater is safe."
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Bima Adnanta Setyawan
"

 Riset ini berawal dari isu-isu mengenai pencemaran dan bahaya lingkungan yang berada di sekitar TPA Cipayung, dan bereferensikan dari bermacam sumber yaitu berita online dan penelitian terdahulu, banyaknya pencemaran serta bahaya lingkungan yang terjadi di TPA Cipayung, Kota Depok. Permasalahan yang timbul dari isu-isu tersebut adalah terjadinya over load di sebelah timur tumpukan sampah TPA Cipayung pada tahun 2018 akibat dari tidak muatnya kapasitas volume sampah yang ditampung. Data yang digunakan dalam penelitian ini adalah data kuantitatif.  Jenis data yang digunakan dalam riset ini adalah data rasio. Seluruh data kuantitatif yang berbentuk peta dan tabular dalam penelitian ini adalah volume sampah, kandungan karbon, dan kandungan nitrogen yang berasal dari pengolahan data. Metode pengambilan sampel citra UAV yang digunakan dalam riset ini adalah grid mission yang selanjutnya diolah menjadi data volume. Metode pengambilan sampel kandungan kimia berupa karbon dan nitrogen yang digunakan dalam riset ini adalah cluster random sampling dengan mengambil sampel yang berkonsentrasi pada tumpukan sampah di TPA Cipayung yang kemudian dianalisis secara statistik untuk dilihat keterkaitannya dengan volume sampah. Hasil riset ini menunjukkan bahwa pola spasial volume  tumpukan sampah memiliki pola yang mirip dengan kandungan karbon di TPA Cipayung . Faktor kimia yang paling berkolerasi dengan kuantifikasi volume sampah pada riset ini  adalah kandungan karbon. Kemiripan pola antara volume sampah dengan kandungan karbon didukung dengan uji statistik yang menunjukkan angka korelasi pearson product moment sebesar 0,946. Pola spasial presentase kandungan karbon yang memiliki kemiripan terhadap pola spasial volume sampah berada di hampir seluruh arah dari tumpukan sampah tersebut tepatnya di sebelah barat, timur, utara, dan selatan.


This research begins with issues concerning pollution and environmental hazards around the Cipayung Landfill, and is referenced from various sources, namely online news and previous research, the amount of pollution and environmental hazards that occur in the Cipayung Landfill, Depok City. The problem that arises from these issues is the overload in the east of the Cipayung landfill pile in 2018 due to the incompatible volume capacity of the collected waste. The data used in this study is quantitative data. The type of data used in this research is ratio data. All quantitative data in the form of maps and tabular in this study are the volume of waste, carbon content, and nitrogen content derived from data processing. The UAV image sampling method used in this research is the grid mission which is then processed into volume data. The chemical content sampling method in the form of carbon and nitrogen used in this research is cluster random sampling by taking a sample that concentrates on the pile of garbage in the Cipayung landfill which is then analyzed statistically to see its relationship with the volume of waste. The results of this research indicate that the spatial pattern of waste heap volume has a pattern similar to the carbon content in Cipayung Landfill. The most correlated chemical factor with the quantification of the volume of waste in this research is the carbon content. The similarity of patterns between the volume of waste with carbon content is supported by statistical tests that show Pearson product moment correlation figures of 0.946. The spatial pattern of the percentage of carbon content that is similar to the spatial pattern of waste volume in most directions of the waste is related to the west, east, north, and south.

"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>