Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 35772 dokumen yang sesuai dengan query
cover
Abdurrahman Wahid
"Aplikasi telemedis berbasis Wireless Body Area Network (WBAN) menjadi salah satu objek penelitian yang mulai banyak dikembangkan di bidang telekomunikasi. Selain karena manfaatnya yang besar dalam meningkatkan kualitas pelayanan kesehatan, peralatan telemedis juga memiliki kelebihan dalam konsumsi daya yang rendah, mobilitas, dan kemudahan dalam melakukan pengawasan kesehatan pasien. Salah satu aplikasi untuk mendukung aplikasi tersebut adalah melalui perangkat yang dapat dipakai (wearable application) menggunakan antena tekstil. Beberapa literatur telah banyak mengembangkan antena untuk wearable application namun kebanyakan merupakan perangkat yang bersifat elektrik atau antena magnetik untuk satu frekuensi kerja. Kelemahan antena elektrik adalah ada atau tidaknya tubuh manusia di dekat antena tersebut sangat mempengaruhi kinerja antena.
Oleh karena itu, pada tesis ini dibuat antena tekstil yang bersifat magnetik dan memiliki frekuensi ganda (dualband) yang diletakkan pada model tubuh manusia yang berupa phantom numerik untuk mengetahui pengaruh tubuh manusia terhadap kinerja antena. Simulasi antena menggunakan phantom numerik yang terdiri dari 3 lapisan tubuh yaitu kulit, lemak, dan otot dengan ketebalan masing-masing berturut-turut 2 mm, 4 mm, dan 54 mm.. Ukuran phantom numerik tersebut memiliki panjang 400 mm dan lebar 400 mm. Nilai konstanta dielektrik (ɛr) phantom numerik pada frekuensi 2,45 GHz adalah 5,28 untuk lemak, 52,73 untuk otot, dan 42,85 untuk kulit. Pada frekuensi 924 MHz adalah 5,46 untuk lemak, 41,28 untuk kulit, dan 56,82 untuk otot. Sementara itu konduktivitas (σ) phantom pada frekuensi 2,45 GHz sebesar 0,104517 S/m pada lemak, 1,738776 S/m pada otot, dan 1,591923 S/m pada kulit. Untuk frekuensi 924 MHz sebesar 1,00443 S/m pada otot, 0,051615 S/m pada lemak, dan 0,874705 untuk kulit.
Hasil simulasi antena menunjukkan bahwa antena bersifat magnetik dan mampu bekerja pada dua frekuensi yaitu 924 MHz dan 2,45 GHz. Hasil simulasi antena tanpa phantom menunjukkan nilai S11 pada frekuensi 924 MHz sebesar -27,307 dB dan pada frekuensi 2,45 GHz sebesar -14,797 dB. Bandwidth yang diperoleh untuk S11 ≤ -10 dB pada frekuensi 924 MHz sebesar 11 MHz dan pada frekuensi 2,45 GHz sebesar 20 MHz. Gain antena yang diperoleh pada kondisi udara bebas sebesar -22,4 dBi untuk frekuensi 924 MHz dan -6,911 dBi untuk frekuensi 2,45 GHz. Sementara itu, ketika antena diletakkan dekat dengan phantom, hasil simulasi menunjukkan bahwa pada jarak 0 mm (menempel tubuh), nilai gain antena untuk frekuensi 924 MHz menjadi -22,71 dBi dan pada frekuensi 2,45 GHz menjadi -10,72 dBi. Nilai SAR yang diperoleh ketika antena diletakkan di dekat tubuh masih memenuhi standar yang ditetapkan oleh ICNRIP yaitu di bawah 2 W/kg.
Hasil pengukuran antena pada kondisi udara bebas menunjukkan nilai S11 pada frekuensi 924 MHz sebesar -21,45 dBi dan pada frekuensi 2,45 sebesar -19,47 dBi. Antena diukur di dekat tubuh manusia dan phantom dengan karaktersitik untuk frekuensi 924 MHz dan 2,45 GHz. Hasil pengukuran antena di dekat tubuh dan phantom masih memenuhi standar S11 yaitu di bawah -10 dBi. Hal ini menunjukkan bahwa ada tidaknya tubuh manusia tidak mempengaruhi kinerja antena.

Wireless Body Are Network (WBAN) telemedicine application is becoming one research object that developing in telecommunication sector. It is not only because the benefits in upgrading health service qualities, but also the advantages in low power consumptions, mobility and practical patient control. One of the application that support WBAN system is practicing wearable application using textile antenna. Some literatures have developed wearable application system yet. Most of them are implementing electricity tools and working only for single frequency. The disadvantages of electric antenna is the performance of the antena depend on the presence of human body near the component.
Based on that statement, in this thesis designed magnetic textile antenna that have double frequency system ( dual band) will be placed on phantom numeric human body model to discover the impact of human body on the antenna?s performance. The pantom numeric antenna simulation consist from 3 body?s layers : skin , fat , muscle with the thickness for each 2 mm, 4 mm and 54 mm. Phantom numeric numbers are 400 mm long and 400 width. Dielectric constant value of phantom numeric on 2.45 GHz frequency is 5.28 for the fat, 52.73 for muscle, and 42.85 for skin. On 924 MHz number are 5.46 for the fat,41.28 for skin and 56.82 for muscle. While phantom conductivity on 2.45 GHz frequency are 0.104517 S/m for fat, 1.738775 S/m for muscle, 1.591923 S/m for skin. On 924 MHz frequency area 1.004436 S/m for muscle, 0.051615 S/m for fat, and 0.08747 S/m for skin.
The antena simulation result shows that the antena is magnetic and works on 2 frequencies those are 924 MHz and 2.45 GHz. The simulation result without phantom shows S11 value on 924 MHz frequency is -27,307 dB and -14,797 dB on 2.45 GHz frequency. Bandwidth that resulted for S11 ≤-10 dB on frequency 924 MHz is 11 MHz and on frequency 2.45 GHz is 21 MHz. Antenna gain resulted on free space condition is -22.4 dBi for frequency 924 MHz and -6.91 dBi for frequency 2.45 GHz. While antenna placed near the phantom , it shows that on 0 mm of space (attached on the body) antenna gain value for frequency 924 MHz is -22.71 dBi and on frequency 2.45 GHz is -10.72 dBi. SAR value that resulted when antenna placed near the body is still occupy the standard that stated by ICNRIP that is below 2 W/kg.
Measurement result on free space condition shows that |S11| value on 924 MHz frequency is -21,45 dBi and on frequency 2,45 GHz is -19,47 dBi. Antena has been measured near human body and phantom for frequency 924 MHz and 2,45 GHz. The results are still occupy the standard of S11, that is below -10 dBi. That means performance of the antenna is not influenced by the presence of human body or phantom near the component."
Depok: Fakultas Teknik Universitas Indonesia, 2014
T41857
UI - Tesis Membership  Universitas Indonesia Library
cover
Gita Ayu Ardiani
"ABSTRAK
Perkembangan Wireless Body Area Network dalam dunia telemedis terus meningkat seiring kebutuhan dan peningkatan pelayanan, walaupun begitu bentuk komunikasi yang efisien dan efektif menjadi hal yang sangat penting untuk setiap jenis jaringan komunikasi tanpa kabel. Salah satu komponen yang paling penting dalam perhitungan perancangan jaringan komunikasi adalah eksponen path loss. Bedasarkan hal tersebut, maka tujuan dari penelitian ini adalah mengetahui karakteristik propagasi untuk komunikasi on-body dan off-body dengan membandingkan simulasi dan pengukuran menggunakan antena tekstil magnetik pada frekuensi 2.45 GHz dan 924 MHz dengan variasi jarak dalam kondisi LOS dan NLOS. Pada skripsi ini, digunakan friss formula untuk mendapatkan nilai eksponen path loss yang menunjukkan karakteristik dari propagasi. Perhitungan nilai eksponen path loss untuk simulasi dan pengukuran pada komunikasi on-body dengan kondisi LOS dan NLOS berada diantara 1.7-2.1 sedangkan off-body dengan kondisi LOS dan NLOS berada diantara 2.1-5.2. Hasil tersebut menunjukkan bahwa tubuh mempengaruhi nilai eksponen path loss dan memiliki karakteristik tersendiri.Kata Kunci:Antena Tekstil, Pengukuran Path Loss, Komunikasi on-body off-body, Frekuensi Ganda.

ABSTRACT
Evolution of Wireless Body Area Network WBAN in telemedicine field keep increased along with needs and enchancement of services, nevertheless an efficient and effective form of communication becomes essential for any type of wireless communication network. One of the most important parameter for designing communication network is path loss exponent. Based on that, the purpose of this research is to know the propagation characteristics for on body and off body communication by comparing the simulation and measurement using magnetic textile antenna at 2.45 GHz and 924 MHz with distance variation in LOS and NLOS conditions. In this thesis, friis formula is used to get the path loss exponent value that shows the characteristics of propagation. The calculation of path loss exponent value for simulation and measurement for on body communication with LOS and NLOS conditions are between 1.7 2.1 while off body with LOS and NLOS conditions are between 2.1 5.2. These results show that the body affects path loss exponents value and has its own characteristics.Keywords Textile Antenna, Path Loss Measurement, On body Off body communication, Dual band"
2017
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rofan Aziz
"ABSTRAK
Penggunaan peralatan telemedis memiliki kelebihan karena kebutuhan daya yang kecil dan dapat digunakan secara portabel. Salah satu alternatif pemilihan bahan antena untuk sistem wearable applications adalah dengan menggunakan antena tekstil. Pada tesis ini dilakukan rancang bangun antena tekstiltipe magnetik pada frekuensi 2,45GHz dengan menggunakan desain yang terinspirasi dari motif batik mega mendung (batik Cirebon), serta penggunaan model tubuh manusia berupa phantom untuk mengetahui pengaruh tubuh manusia terhadap kinerja antena yang diletakkan di dekatnya. Dalam tesis ini, dirancang dua tipe antena yang bersifat magnetik yaitu microstrip spiral antenna (tipe-1) dan microstrip spiral slot antenna (tipe-2) menggunakan metode finite integration technique (FIT).Berdasarkan analisis dari hasil simulasi, antena tipe-1 dantipe-2 memilikikecenderungan sebagai antena magnetik, dimana hal ini dapat dilihat dari besaranintensitas medan listrik (E) dan medan magnet (H) pada area di sekitar medan dekat (near field) antena. Hasil simulasi dan pengukuran menunjukkan hasil unjuk kerja antena tipe-1 memiliki frekuensi resonansi di 2,45 GHz,dengan nilai|S11|berturut-turut24,15 dB dan12,09 dBdi udara bebas.Bandwidth impedansi (VSWR  2)sebesar 27,10 MHz (1,1%) dan 40 MHz (1,6%) berturut-turut untuk simulasi dan pengukuran.Gain antena didapatkan 0,96 dBi (simulasi) dan 0,42 dBi (pengukuran).Ketika antena tipe-1 ini diletakkan di dekat model tubuh manusia (phantom) didapatkan nilai specific absorption rate (SAR) sebesar 0,00083 W/Kg pada standar 10g rata-rata jaringan tubuhdengan daya masukan 1 mW. Pada antena tipe-2, hasil simulasi dan pengukuran menunjukkan unjuk kerja |S11| berturut-tutut sebesar -21,61 dB dan -24,19 dB. Bandwidth impedansi sebesar 52,90 MHz (2,1%) dan 43 MHz (1,76%) berturut-turut untuk simulasi dan pengukuran. Gain antena pada simulasi 10,68 dBi, sedangkan hasil pengukuran didapatkan 12,73 dBi karena fabrikasi antena dikerjakan secara manual. Simulasi SAR memperlihatkan nilai 0,03029 W/Kg (10g rata-rata jaringan tubuh) jika diberikan daya masukan 1 mW.

ABSTRACT
Currently, the use of wireless telemedicine equipment is greatly developed due to some advantages such as low power and its portability. To be used for wearable applications, telemedicine requires a suitable device that is comfortable for attaching on the human body. To do that, textile-type device is usually proposed, of which a textile antenna is required. This thesis proposes a magnetic-type textile antenna at 2.45 GHz, where the antenna design is basically inspired by traditional Cirebon batik style called mega mendung. The proposed antenna is put in the proximity of the human body model (called a phantom), in order to investigate the body effect on the antenna performances. In this thesis, two structures of magnetic antenna, namely a microstrip spiral antenna as an antenna type-1 and a microstrip spiral slot antenna as type-2, are numerically analyzed by the use of finite integration technique (FIT). According to the simulation results, both of the proposed antennas tend to have magnetic properties as the magnetic-type antenna has, which it can be seen from the electric and magnetic fields intensity within the near field region. The simulated and measured results show that the antenna type-1 resonates at 2.45 GHz in free space with |S11| is -24.15 dB and -12.09 dB, respectively. The impedance bandwidth is 27.10 MHz (1.1%) and 40 MHz (1.6%) for simulated and measured result, respectively. The antenna gain is 0.96 dBi (simulation) and 0.42 dBi (measurement) without any human body is present. When the human body model is put in proximity to the antenna and 1 mW of input power is given to the antenna, very small value of specific absorption rate (SAR) by 0.00083 W/Kg is obtained for 10g-tissue averaged standard. As for antenna type-2, the simulated and measured results show that it resonates at 2.45 GHz in free space with |S11| is -21.61 dB and -24.19 dB, respectively. The impedance bandwidth is 52.90 MHz (2.1%) and 43 MHz (1.76%) for simulated and measured result, respectively. The antenna gain is 10.68 dBi for simulation and 12.73 dBi for measurement since the fabricated antenna is manually manufactured. The simulated SAR value by 0.03029 W/Kg (10g-tissue averaged standard) is obtained when the input power of 1 mW is given"
2014
T39053
UI - Tesis Membership  Universitas Indonesia Library
cover
Harahap, Emir Soaduon
"Pada penelitian ini dilakukan perancangan antena yang beresonansi pada frekuensi 1.8 GHz dan 2.1 GHz. Pemilihan frekuensi ini disesuaikan terhadap IMT 2000. Penggunaan geometri antena berbentuk segitiga sama sisi dimaksudkan untuk memperkecil dimensi antena secara keseluruhan. Secara geometris antena ini berbentuk dua segitiga sama sisi yang saling membelakangi, satu segitiga sebagai radiator dan segitiga yang lain sebagai parasitiknya. Gangguan yang dilakukan oleh elemen parasitik terhadap elemen peradiasi dengan menggandeng keduanya dengan jarak tertentu, memunculkan frekuensi resonan baru yang berdekatan dengan frekuensi resonan utama yang dibangkitkan oleh elemen peradiasi. Perbandingan antara frekuensi alas terhadap bawahnya sebesar 1.1. Resonan pertama dibangkitkan oleh elemen peradiasi sedangkan resonan kedua berasal dari elemen parasitik.
Metode Hubung singkat yang terhubung antara patch dengan ground plane pada satu titik di antara voltage null dengan puncak segitiga sama sisi, menghasilkan dimensi antena yang berukuran 113 bagian dari sebenarnya. Celah, di antara dua elemen yang saling membelakangi, akan berpengaruh pada frekuensi rasio antara kedua resonan tersebut maupun perolehan nilai return loss yang berkaitan dengan nilai VSWR di bawah 1.2.
Cara yang digunakan untuk memperoleh perbandingan elemen radiator dan parasitiknya adalah dengan menguji coba 5 buah antena dengan 5 perbedaan pada elemen parasitiknya. Untuk mengetahui jarak celah yang tepat adalah dengan menguji coba 5 buah antena yang identik namun memiliki 5 perbedaan celah yang menggandeng elemen radiator dengan parasitiknya.
Hasil pengukuran return loss yang diperoleh dari segitiga dengan panjang sisi elemen peradiasi 2 cm dan panjang sisi parasitik 1.6 cm adalah -21.24 dB untuk frekuensi 1.86 GHz dan -25.37 dB untuk frekuensi 2.15 GHz. Nilai VSWR-nya berturut-turut 1.19 dan 1.12. Bandwidth pada kedua resonan adalah 37.21 MHz.

The research had been done to design antenna which are resonant at L8 GHz and 2.1 GHz. The frequencies are adjusted to IMT 2000. Geometrical dimension such as equilitriangular is used to shrink the original patch. The antenna is consisted of two element, one element as radiator and the other as parasitic. The disturbance done by parasitic element generates new resonant which is closed to the main resonant. Division between second and first resonant is 1.1. The first resonant is generated by radiator and second resonant is generated by parasitic element.
Short circuit connected from patch to ground plane in one spot between voltage null and equilitriangular tip, can shrink the dimension to become 113 part of original dimension. Gap, between two element can affect to frequency ratio and return loss values connected to VSWR values beneath 1.2.
The way to reach appropriate composition between radiator and parasitic element through experiment on 5 samples that have 5 different parasitic dimensions. The way to reach appropriate gap between radiator and parasitic element through on 5 samples that have 5 different gaps.
With 2 cm radiator equilitriangular length and 1.6 cm parasitic equilitriangular length brings return loss results -21.24 dB at L86 GHz and -25.37 dB at 2.15 GHz, respectively. VSWR values are 3.19 and 1.12 respectively. Bandwidth on both resonant is 37.21 MHz.
"
Depok: Fakultas Teknik Universitas Indonesia, 2002
T2786
UI - Tesis Membership  Universitas Indonesia Library
cover
"This book presents the post-proceedings, including all revised versions of the accepted papers, of the 2017 European Alliance for Innovation (EAI) International Conference on Body Area Networks (BodyNets 2017). The goal of BodyNets 2017 was to provide a world-leading and unique forum, bringing together researchers and practitioners from diverse disciplines to plan, analyze, design, build, deploy and experiment with/on Body Area Networks (BANs)."
Switzerland: Springer Nature , 2019
e20505623
eBooks  Universitas Indonesia Library
cover
"This book provides a novel solution for existing challenges in wireless body sensor networks (WBAN) such as network lifetime, fault tolerant approaches, reliability, security, and privacy. The contributors first discuss emerging trends of WBAN in the present health care system. They then provide possible solutions to challenges inherent in WBANs. Finally, they discuss results in working environments. Topics include communication protocols of implanted, wearable and nano body sensor networks; energy harvesting methodologies and experimentation for WBAN; reliability analysis and fault tolerant architecture for WBAN; and handling network failure during critical duration. The contributors consist of researchers and practitioners in WBAN around the world."
Switzerland: Springer Nature, 2019
e20507060
eBooks  Universitas Indonesia Library
cover
Yusak Krisnanda S.
"Cognitive radio merupakan teknologi telekomunikasi yang sedang dikembangkan dalam rangka mengatasi terbatasnya sumber daya spektrum frekuensi dan rendahnya efisiensi penggunaan spektrum yang ada. Skripsi ini membahas rancang bangun antena yang sesuai untuk aplikasi cognitive radio yang dapat bekerja pada frekuensi CDMA 1,9 GHz , WCDMA 2,1 GHz dan WiMAX 2,3 GHz untuk divais elektronik.
Rancang bangun antena terdiri dari dua antena yaitu printed monopole antenna untuk pemindai dan Z-shape slot microstrip antenna untuk reconfigurable antenna. Dua antena tersebut di fabrikasi pada substrat FR4 dengan ground yang umum pada lapisan atasnya.
Antena pemindai bertujuan sebagai pemindai spektrum dengan karakteristik pita lebar (1,0 GHz sampai 2,4 GHz). Reconfigurable antenna bertujuan untuk menghasilkan frekuensi resonansi dengan mengatur switch pada antenna yang memungkinkan antena memiliki tiga frekuensi resonansi yang berbeda.
Hasil pengukuran menunjukkan sensing antenna memiliki impedance bandwidth 1,4 GHz (VSWR ≤ 2) dengan pola radiasi yang baik jika dibandingkan dengan hasil simulasi. Sedangkan reconfigurable antenna dapat bekerja dengan baik CDMA 1,9 GHz , WCDMA 2,1 GHz dan WiMAX 2,3 GHz sebagai prediksi pada hasil simulasi.

Cognitive radio is technology that is developed as a solution for limited frequency spectrum resources and inefficiency spectrum utilization issues. This thesis discusses the design of antenna for cognitive radio applications applied into electronic device which can perform at CDMA, WCDMA and WiMAX frequency.
The design consists of two antennas, namely a printed monopole antenna for sensing and Z-shape slot microstrip antenna for reconfigurable antenna. Two antennas are fabricated on FR4 substrate with common ground on the top layer.
The sensing antenna is aimed at spectrum sensing, which has wideband characteristics (1.0 GHz to 2.4 GHz) and omnidirectional radiation pattern. The reconfigurable antenna is designed for generating the desired resonant frequency by adjusting the switch position on the antenna structure allowing for the antenna to have three different resonant frequencies.
The measurement results show that the sensing antenna has 1.4 GHz impedance bandwidth (VSWR ≤ 2) with good agreement of the radiation pattern compared to the simulation results. Moreover, reconfigurable antenna can work well at CDMA 1.9 GHz, WCDMA 2.1 GHz dan WiMAX 2.3 GHz as predicted in the simulation results.
"
Depok: Fakultas Teknik Universitas Indonesia, 2013
S44185
UI - Skripsi Membership  Universitas Indonesia Library
cover
Filda Ayu Afrida
"Dalam sistem komunikasi WLAN, peran antena merupakan elemen penting berfungsi sebagai pengirim dan penerima gelombang elektromagnetik yang berisi informasi-informasi dari media kabel ke udara atau sebaliknya. Teknologi nirkabel dengan standar IEEE 802.11 dan berdasarkan peraturan KOMINFO 2019 menuntut memiliki antena yang dapat menyesuaikan diri terhadap lingkungan yang berubah-ubah. Antena yang digunakan dalam jaringan WLAN disesuaikan dengan lingkup jangkauan yang diharapkan. Antena polarisasi melingkar adalah pilihan paling jelas bagi peneliti dimana dapat mengatasi kelemahan pada polarisasi linier, seperti, kerugian akibat ketidaksesuaian polarisasi, kerentanan terhadap efek multipath dan fading, rotasi Faraday, dan kondisi cuaca buruk. Untuk memenuhi perkembangan teknologi saat ini jenis antena mikrostrip adalah solusi yang baik, karena memiliki beberapa keunggulan seperti bentuk yang sederhana, bobot yang ringan, pembuatan yang mudah dan biaya yang murah.
Pada buku tesis ini diusulkan antena mikrostrip yang dapat rekonfigurasi polarisasi dengan menggunakan U-slot pada frekuensi 2,4 GHz untuk aplikasi WLAN. Teknik U-slot yang disisipkan pada patch antena membuat pengaruh hasil polarisasi menjadi melingkar kiri atau kanan. Diusulkan rekonfigurasi polarisasi antena mikrostrip dengan menggunakan dua (2) buah switching on dan off yang dinyalakan salah satu maupun bersamaan. Simulasi yang dilakukan menunjukkan bahwa antena 1 dan antena 2 memiliki polarisasi linier (LP), antena 1 memiliki bandwidth 75 MHz (2,40 GHz – 2,48 GHz) dan antena 2 memiliki bandwidth 77 MHz (2,40 GHz – 2,48 GHz) dengan batasan nilai S- parameter ≤­9,54 dB. Antena 3 memiliki polarisasi melingkar LHCP (left-hand circular polarized) dengan nilai bandwidth 133 MHz (2,35 GHz – 2,48 GHz) dan antena 4 memiliki polarisasi melingkar RHCP (right-hand circular polarized) dengan nilai bandwidth 133 MHz (2,39 GHz – 2,48 GHz) pada batasan Axial Ratio (AR) ≤3. Hasil pengukuran yang diperoleh pada antena 1 dan antena 2 memiliki polarisasi linier, dimana antena 1 memiliki nilai bandwidth sebesar 85 MHz (2,39 GHz – 2,48 GHz) sedangkan pada antena 2 memiliki bandwidth 68 MHz (2,40 GHz – 2,46 GHz). Antena 3 memiliki polarisasi melingkar LHCP dengan bandwidth sebesar 69 MHz (2,40 GHz – 2,46 GHz). Pada antena 4 memiliki polarisasi melingkar RHCP dengan nilai bandwidth sebesar 75 MHz (2,39 GHz – 2,46 GHz). Seluruh antena pada hasil simulasi dengan hasil pengukuran sesuai memiliki spesifikasi antena WLAN sehingga antena ini dapat beroperasi untuk WLAN.

In WLAN communication systems, the role of the antenna is an important element to function as a sender and receiver of electromagnetic waves containing information from cable media to air or vice versa. Wireless technology with the IEEE 802.11 standard and based on the 2019 KOMINFO regulations demands having an antenna that can adapt to changing environments. The antennas used in WLAN networks are adjusted to the expected coverage scope. Circular polarizing antennas are the most obvious choice for researchers in overcoming weaknesses in linear polarization, such as losses due to polarization mismatch, susceptibility to multipath and fading effects, Faraday rotation, and adverse weather conditions. To meet current technological developments this type of microstrip antenna is a good solution, because it has several advantages such as a simple shape, light weight, easy manufacture and low cost.
In this thesis book proposed a microstrip antenna that can reconfigure polarization using U-slot at a frequency of 2.4 GHz for WLAN applications. The U-slot technique inserted in the antenna patch makes the polarization result affect the left or right circular. It is proposed to reconfigure the polarization of the microstrip antenna by using two (2) switching on and off which are turned on one or simultaneously. The simulation shows that Antenna 1 and Antenna 2 have linear polarization (LP), antenna 1 has a bandwidth of 75 MHz (2.40 GHz – 2.48 GHz) and antenna 2 has a bandwidth of 77 MHz (2.404 GHz – 2.481 GHz) with a limitation of the value of the S-parameter ≤9.54 dB. Antenna 3 has LHCP (left-hand circular polarized) circular polarization with a bandwidth value of 133 MHz (2.35 GHz – 2.48 GHz) and antenna 4 has RHCP (right-hand circular polarized) circular polarization with a bandwidth value of 133 MHz (2.39 GHz – 2.48 GHz) at the Axial Ratio (AR) limit of ≤3. The measurement results on antenna 1 and antenna 2 have linear polarization, where antenna 1 has a bandwidth value of 85 MHz (2.39 GHz – 2.48 GHz) while antenna 2 has a bandwidth of 68 MHz (2.40 GHz – 2.46 GHz). Antenna 3 has LHCP circular polarization with a bandwidth of 69 MHz (2.40 GHz – 2.46 GHz). Antenna 4 has a circular polarization RHCP with a bandwidth value of 75 MHz (2.39 GHz – 2.46 GHz). All antennas in the simulation results with the appropriate measurement results have WLAN antenna specifications so that this antenna can operate for WLAN.
"
Depok: Fakultas Teknik Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Fajar Aulia Rachman
"Teknologi telekomunikasi seluler berkembang sangat pesat, mulai dari diluncurkannya generasi pertama 1G pada tahun 1980 dimana teknologi masih berbasis analog, generasi kedua 2G pada tahun 1990 dengan peralihan dari analog ke digital, hingga sekarang sudah memasuki generasi kelima 5G. Perkembangan ini sejalan dengan meningkatnya kebutuhan masyarakat akan koneksi internet yang cepat dan availabilitas tinggi. Teknologi 5G yang identik dengan bandwidth yang besar, kecepatan yang tinggi, dan coverage luas merupakan solusi untuk mengatasi kebutuhan tersebut. Di dalam teknologi 5G terdapat sistem antena MIMO yang memungkinkan multi-antena untuk beroperasi secara simultan sehingga dapat mengurangi efek multipath fading, meningkatkan kapasitas bandwidth, dan kecepatan data. Penggunaan lebih dari satu antena yang berdekatan mengakibatkan efek mutual coupling yang dapat menurunkan kinerja antena. Pada penelitian ini telah dirancang antena MIMO menggunakan metode Defected Ground Structure (DGS) untuk menurunkan nilai mutual coupling. Antena yang beroperasi pada frekuensi 2,3 GHz dan 3,5 GHz ini dirancang pada bahan FR-4 dengan elemen peradiasi berbentuk rectangular dengan penambahan slot rectangular. Telah dilakukan 4 skenario penyusunan antena dengan hasil simulasi dan pengukuran terbaik adalah antena MIMO dengan peletakan port diputar 900. Hasil simulasi antena pada frekuensi rendah diperoleh nilai bandwidth 109 MHz dan mutual coupling dari -21,72 dB hingga -28,25 dB, pada frekuensi tinggi diperoleh nilai bandwidth 130 MHz dan mutual coupling dari -27,85 dB hingga -30,58 dB. Hasil pengukuran antena pada frekuensi rendah diperoleh nilai bandwidth 189 MHz mutual coupling dari -19,43 dB hingga -33,63 dB, pada frekuensi tinggi nilai bandwidth 144 MHz dan mutual coupling dari -21,72 dB hingga -30,58 dB. Perbaikan nilai mutual coupling pada frekuensi rendah sebesar 4,66 dB hingga 7,74 dB, sedangkan pada frekuensi tinggi sebesar 4,20 dB hingga 5,84 dB.

Mobile telecommunications technology has developed rapidly, beginning with the launch of the first generation (1G) in 1980, where the technology was still analog-based. It then transitioned to the second generation (2G) in 1990 with the shift from analog to digital. As of now, we have entered the fifth generation (5G). This development aligns with the growing public demand for high-speed and highly available internet. 5G technology, capable of providing extensive bandwidth, high speed, and wide coverage, emerges as a solution to meet these demands. Within 5G technology, the MIMO antenna system stands out, allowing multiple antennas to operate simultaneously, thereby mitigating the effects of multipath fading and enhancing bandwidth capacity and data speed. The use of more than one nearby antenna results in mutual coupling effects that can degrade antenna performance. In this research, MIMO antenna has been designed using the Defected Ground Structure (DGS) method to reduce mutual coupling values. This antenna, operating at frequencies of 2,3 GHz and 3,5 GHz, is designed using FR-4 material with rectangular radiation elements and the addition of rectangular slots. Four scenarios of antenna configurations have been carried out, and the best and measurement results were achieved with the MIMO antenna with the ports rotated 900. The simulation results at low frequencies yielded a bandwidth value of 109 MHz, and the mutual coupling ranged from -21,22 dB to -28,25 dB. At high frequencies, the bandwidth value was 130 MHz and the mutual coupling ranged from -27,85 dB to -30,58 dB. The measurement results at low frequencies yielded a bandwidth value of 189 MHz and the mutual coupling ranged from -19,43 dB to -33,63 dB. At high frequencies, the bandwidth value was 144 MHz and the mutual coupling ranged from -21,72 dB to -30,58 dB. Improvements in mutual coupling at low frequencies range from 4,66 dB to 7,74 dB, while at high frequencies range from 4,20 dB to 5,84 dB."
Depok: Fakultas Teknik Universitas Indonesia, 2024
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Tb. Tidra Barezna Imanu
"Skripsi ini membahas rancang bangun antena reconfigurable untuk aplikasi cognitive radio pada alokasi spektrum 1,8 GHz, 2,1 GHz uplink, 2,1 GHz downlink, dan 2,35 GHz. Rancang bangun antena terdiri dari dua antena yaitu antena sensing dan antena communicating yang digabungkan dalam satu divais. Antena sensing memiliki karakteristik ultrawideband dari 1,65 GHz - 3,75 GHz (bandwidth = 2,1 GHz) dan antena communicating memiliki karakteristik narrowband pada frekuensi 1.8 GHz, 2.1 GHz uplink, 2.1 GHz downlink, dan 2.35 GHz. Hasil validasi dengan pengukuran diperoleh hasil yang sesuai dengan rancangan simulasi, terutama meliputi parameter return loss, pola radiasi, dan gain.

This bachelor thesis discusses a design and fabrication of reconfigurable antenna for cognitive radio applications, especially for allocation of spectrum 1.8 GHz, 2.1 GHz Uplink, 2.1 GHz Downlink, and 2.35 GHz. The antenna design consists of two antennas which sensing antenna and communicating antenna. The sensing antenna has ultrawideband characteristics from 1.65 GHz - 3.75 GHz (the bandwidth about 2.1 GHz) and the communicating antenna has narrowband characteristics at the center frequency 1.8 GHz, 2.1 GHz uplink, 2.1 GHz downlink, and 2.35 GHz. The validation has been conducted by the measurement, where it agrees with the simulation result, in particular for the parameter of return loss, radiation pattern and gain of the antenna."
Depok: Fakultas Teknik Universitas Indonesia, 2012
S44147
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>