Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 213473 dokumen yang sesuai dengan query
cover
Novianto Agung Cahyono
"Latar Belakang: Magnesium merupakan biomaterial logam yang berpotensi digunakan sebagai material implan tubuh yang dapat terdegradasi. Syarat magnesium dapat digunakan sebagai material implan biodegradasi adalah laju degradasi magnesium harus memiliki kekuatan mekanis yang cukup dalam jangka waktu tertentu, sampai terjadi penyembuhan tulang, kecepatan resorbsi yang sesuai dengan kecepatan penyembuhan tulang. Aplikasi magnesium sebagai implan yang terdegradasi terhambat karena tingkat tinggi degradasi lingkungan fisiologis. Dengan adanya sifat biodegradasi magnesium maka diperlukan cara bagaimana mencegah atau menekan kecepatan laju biodegradasi sehingga dapat disesuaikan dengan proses penyembuhan tulang. Beberapa penelitian tentang magnesium telah dilakukan untuk mengatasi keterbatasan tersebut, antara lain dengan prosedur Equal Channel Angular Pressing ( ECAP), merupakan salah satu prosedur dari grain refinement yang dapat menurunkan laju degradasi dan meningkatkan sifat mekanis magnesium.
Tujuan: Menganalisa sifat mekanis magnesium ECAP dalam perendaman dalam larutan DMEM.
Metode: Sifat mekanis magnesium ECAP dianalisis setelah dilakukan perendaman dalam larutan DMEM dengan menggunakan masing-masing sepuluh sampel magnesium ECAP untuk uji bending dan sepuluh sampel magnesium ECAP uji keuletan. Sifat mekanis di analisis menggunakan nilai bending pada uji bending dan nilai keuletan pada uji keuletan.
Hasil: Terdapat pengaruh waktu perendaman terhadap nilai bending magnesium ECAP, nilai keuletan magnesium ECAP dan penurunan nilai bending juga nilai keuletan magnesium ECAP pada perendaman dalam larutan fisiologis DMEM.

Background: Magnesium is a metal biomaterials that could potentially be used as an implant material which can be decomposed body. Requirement of magnesium can be used as an implant material is the biodegradation rate of degradation must possess sufficient mechanical strenght in a certain period of time until the healing bone resorption speed corresponding to speed bone healing, generally magnesium has a rapid rate of degradation, it is undesirable magnesium deficiency. Application of magnesium as the implant is degraded hampered by high levels of physiological environmental degradation. With the biodegradation rate of speed so it can be adapted to the bone healing process. Several studies on magnesium have been made to overcome these limitations. Among others, the ECAP procedure which is one of the grain refinement procedure that can decrease the rate of degradasi and improve the mechanical properties of magnesium.
Objective: To analyze the mechanical properties of magnesium ECAP in DMEM solution immersion.
Methods: Mechanical properties of magnesium ECAP analyzed after immersion in DMEM solution by using each of the ten samples of magnesium ECAP for bending test and ten samples of magnesium ECAP for ductility test.
Result: There is the effect of immersion time on the value of ECAP bending magnesium, magnesium ECAP ductility value and impairment bending ductility also magnesium ECAP on immersion in physiological solution of DMEM.
"
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2014
SP-Pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Rahmi Syaflida
"Magnesiummerupakan suatu material yang berpotensi digunakan sebagai biomaterial logam yang dapat terdegradasi. Syarat magnesium dapat digunakan sebagai material implan biodegradable adalah laju degradasimagnesiumharus sesuaidenganlaju penyembuhandarijaringan yang terlibat.Umumnya magnesium memiliki laju degradasi yang cepat, hal ini merupakan kekurangan magnesium yang tidak diinginkan.Aplikasimagnesiumsebagai implanyang terdegradasiterhambatkarena tingkattinggidegradasilingkungan fisiologisdan kerugiankonsekuen dalamsifat mekanik. Oleh karena itu, proses Equal Channel Angular Pressing (ECAP) yang dilakukan padamagnesium diharapkan akanmengurangiukuran butir yang dapat menurunkanlaju degradasidan meningkatkansifat mekanis magnesium.
Tujuan: Menganalisasifat mekanismagnesium ECAP dalam cairan fisiologis.
Metode:Sifat mekanis magnesium ECAP dianalisis setelah dilakukan perendaman dalam larutan DMEM dengan menggunakan masing-masing sepuluh sampel magnesium ECAP dan lima sampel magnesium untuk uji tarik dan uji kekekrasan. Sifat mekanis di analisis menggunakan nilai ultimate tensile strength (UTS) pada uji tarik dan vickers hardness number (VHN) pada uji kekerasan.
Hasil: Kekuatan dan kekerasan magnesium meningkat setelah proses ECAP.

Magnesium has thepotential to be used asdegradable metallic biomaterial. For magnesium to be used as biodegradable implant materials, their degradation rates should be consistent with the rate of healing of the affected tissue, the release of the degradation products should be within the body?s acceptable absorption levels. Conventional magnesium degrades rapidly, which is undesirable. The successful applications of magnesium as degradable implants are mainly inhibited due to their high degradation rates in physiological environment and consequent loss in the mechanical properties. Equal channel angular pressing (ECAP) was applied to a pure magnesium. This processes will be decreasing grain size, decreasing degradation rates and increasing mechanical properties.
Purpose: To analyze the mechanical properties of magnesium ECAP in physiological fluid.
Method:The mechanical properties were obtained from immersion test in a DMEM solution, within ten magnesium ECAP specimens and five specimens of pure magnesium as a control. Mechanical properties were analyzed using the value of ultimate tensile strength (UTS) with tensile testing and vickers hardness number (VHN) with hardness testing.
Results:The ultimate tensile strength and hardness magnesium increased after ECAP, and the mechanical properties of the magnesium ECAP decreased in physiological fluid.
"
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2012
T33041
UI - Tesis Membership  Universitas Indonesia Library
cover
Arfan Badeges
"Dalam penatalaksanaan trauma maksilofasial diperlukan material implan sampai terjadi penyembuhan tulang. Magnesium memiliki potensi sebagai material implan tulang, dengan syarat memiliki laju biodegradasi yang baik. Proses equal channel angular pressing (ECAP) merupakan salah satu metode untuk memperbaiki sifat biodegradasi dari material logam.
Tujuan: Mengkaji proses biodegradasi magnesium ECAP pada cairan fisiologis.
Metode: Laju biodegradasi dan tingkat evolusi hidrogen didapatkan dari uji perendaman pada larutan DMEM dengan metode weight loss dan spektrometri dengan menggunakan dua belas spesimen magnesium ECAP dan enam spesimen magnesium murni sebagai kontrol. Pola biodegradasi didapatkan dari analisis struktur permukaan mikro. Analisis data menggunakan uji T independen.
Hasil: Terdapat perbedaan yang signifikan antara laju biodegradasi dan tingkat evolusi hidrogen antara magnesium ECAP dengan magnesium murni. Magnesium ECAP memiliki pola biodegradasi yang homogen.
Kesimpulan: Magnesium ECAP memiliki laju biodegradasi dan tingkat evolusi hidrogen yang lebih baik dibandingkan dengan magnesium murni.

Implant material are used in the management of maxillofacial trauma until bone healing occur. Magnesium has the potential to be a bone implant material, but it requires a good biodegradation rate. The process of equal channel angular pressing (ECAP) is a method to improve the biodegradation properties of metallic materials.
Purpose: To observe the biodegradation process of magnesium ECAP in physiological fluid.
Method: The biodegradation and hydrogen evolution rate were obtained from immersion test in a DMEM solution, using weight loss and spectrometric method within twelve magnesium ECAP specimens and six specimens of pure magnesium as a control. Biodegradation pattern were obtained from the micro surface structures analysis. The result was statistically analyzed with independent T test.
Results: There were significant difference between the biodegradation and hydrogen evolution rate between magnesium ECAP and pure magnesium. Magnesium ECAP has a homogeneous biodegradation pattern.
Conclusion: Magnesium ECAP has better biodegradation and hydrogen evolution rate than pure magnesium.
"
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2012
T33021
UI - Tesis Membership  Universitas Indonesia Library
cover
Muhammad Iman Utama
"Kebutuhan penghematan energi dunia menuntut untuk melakukan peminimalisasian energi tak terlepas di bidang pengecoran. Penggunaan TWADI (Thin Wall Austempered Ductile Iron) yang didapatkan dari heat treatment TWDI (Thin Wall Ductile Iron) menjadi kandidat yang paling menarik karena ketangguhannya yang sangat tinggi serta biaya lebih murah dan tentunya lebih hemat energi dibandingkan aluminium. Dalam Pemrosesan TWDI menemui masalah yaitu perubahan grafit nodul menjadi flakes atau yang dikenal sebagai skin effect dimana skin akan menurunkan sifat mekanis dari TWDI.
Penelitian ini mempelajari pengaruh penambahan kadar nodulizer terhadap terbentuknya skin serta pengaruhnya terhadap sifat mekanis. Skin yang didapat pada penambahan 1,1 % nodulizer dengan tebal 40 µm lebih tipis dibandingkan 1 % nodulizer yang memiliki tebal skin 45 µm. Nilai UTS yang didapat oleh penambahan 1,1% nodulizer yaitu 416,5 MPa, lebih tinggi dibandingkan 1 % nodulizer sebesar 387,54 MPa, dimana hal tersebut sejalan dengan nodularitas yang lebih tinggi dengan penambahan 1,1 % nodulizer. Nilai elongasi kedua sampel tidak mencapai 10 % yang dikarenakan terbentuknya kolumnar karbida yang terbentuk dari berlebihnya kadar mangan pada kedua sampel.

Recent world energy condition obligates people to reduce quantity of energy useement especially ini casting process. Uses of Thin Wall Austempered Ductile Iron (TWADI), which is a heat treatment material from Thin Wall Ductile Iron (TWDI) , become a best candidate to replace aluminium in industry due to the fact of its high quality toughness and another mechanical properties, with low producing cost and also low energy production. One of the most issue that have been met in processing TWDI is a phenomenon that nodular graphites turn into flakes shape which will decrease large amount of mechanical properties.
This research is studying about the enhacement of content nodulizer for reducing skin thickness and also to increase mechanical properties. The addition of 1,1 % nodulizer that obtained shown an effective result with reducing 11 % thickness of skin compared to the thickness of addition 1 % nodulizer. The thickness of skin with addition 1,1% nodulizer is 40 µm, while with addition 1 % nodulizer is 45 µm. The UTS number that has been reached by 1,1 % nodulizer is 416,5 % MPa, which is bigger than the UTS of 1 % nodulizer in the amount of 387,54 MPa which also as a result of grater nodularity of 1,1 % nodulizer. The elongation of both sample have elongation below 10 %, as result of carbides that have been formed in the microstructure, because of excessive number of manganese.
"
Depok: Fakultas Teknik Universitas Indonesia, 2015
S60137
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Raihan Bintang Abhista
"Fraktur yang terjadi pada craniomaxillofacial dapat memicu cedera lain di kepala sehingga membutuhkan penggunaan miniplate untuk fiksasi yang stabil selama proses penyembuhan. Magnesium miniplate muncul sebagai implan dengan sifat biodegradable potensial karena memiliki sifat mekanik yang sangat baik dan memiliki sifat biokompatinilitas. Namun, kinerja dan stabilitas sifat mekanisnya saat terpapar lingkungan fisiologis perlu dievaluasi secara menyeluruh. Penelitian ini menginvestigasi efek pengujian imersi dengan Hank's Balanced Salt Solution (HBSS) terhadap sifat mekanik pure magnesium miniplate untuk fraktur craniomaxillofacial. Uji perendaman bertujuan untuk mensimulasikan kondisi korosif yang akan dihadapi oleh implantasi di dalam tubuh manusia. Uji bending dilakukan untuk mengevaluasi perubahan kekuatan mekanik, elastisitas, dan perilaku retak miniplate setelah imersi. Selain itu perhitungan laju korosi juga dilakukan untuk mengetahui korelasinya dengan kekuatan mekanis pure magnesium miniplate setelah uji imersi. Hasil penelitian ini mengungkapkan bahwa perendaman dalam HBSS memiliki pengaruh signifikan terhadap sifat mekanik miniplat magnesium murni. Uji tersebut menunjukkan perubahan dalam bending strength dan bending load yang mengindikasikan potensi degradasi dan perubahan perilaku mekanik miniplat. Temuan ini berkontribusi pada pemahaman kita tentang kinerja jangka panjang dan daya tahan miniplat magnesium murni dalam konteks fraktur craniomaxillofacial. Pengetahuan tersebut sangat penting untuk mengoptimalkan desain implant dan memastikan hasil klinis yang berhasil dalam bidang bedah craniomaxillofacial.

Fractures occurring in the craniomaxillofacial region can result in additional head injuries, necessitating the use of miniplates for stable fixation during the healing process. Magnesium miniplates have emerged as potential biodegradable implants due to their excellent mechanical properties and biocompatibility. However, their performance and mechanical stability when exposed to physiological environments require comprehensive evaluation. This study investigates the effect of immersion testing with Hank's Balanced Salt Solution (HBSS) on the mechanical properties of pure magnesium miniplates for craniomaxillofacial fractures. The immersion test aims to simulate the corrosive conditions that the implant may encounter within the human body. Bending tests were conducted to evaluate the changes in mechanical strength, elasticity, and fracture behavior of the miniplates after immersion. Additionally, corrosion rate calculations were performed to determine their correlation with the mechanical strength of pure magnesium miniplates after the immersion test. The results of this study revealed that immersion in HBSS significantly influenced the mechanical properties of pure magnesium miniplates. The tests demonstrated changes in bending strength and bending load, indicating potential degradation and altered mechanical behavior of the miniplates. These findings contribute to our understanding of the long-term performance and durability of pure magnesium miniplates in the context of craniomaxillofacial fractures. Such knowledge is crucial for optimizing implant design and ensuring successful clinical outcomes in the field of craniomaxillofacial surgery."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Amadeus Dewangga
"Penanganan kasus fraktur khususnya pada rahang manusia ( maxilla; rahang atas, mandibula; rahang bawah ) menggunakan alat fiksasi berupa miniplate. Secara komersil titanium merupakan material yang digunakan sebagai material miniplate karena biokompabilitas tinggi terhadap tubuh dan mechanical properties yang tinggi. Tetapi titanium kurang cocok dikarenakan young modulus yang tidak sesuai dengan tulang ( kemungkinan gagal fiksasi ) dan tidak bersifat biodegradeable. Material pengganti yang sudah sering diteliti adalah magnesium karena bersifat biodegradeable dan memiliki mechanical properties yang menyerupai tulang. Tetapi laju korosi magnesium sangat tinggi, sehingga perlu diberi perlakuan tambahan agar penyembuhan fraktur optimal.
Penelitian ini berfokus pada komposit berbasis magnesium sebagai upaya mengurangi laju korosi dengan menambahkan karbonat apatit saat proses pembuatan dengan teknik powder metallurgy sebanyak 5%, 10%, dan 15%. Untuk mengetahui mechanical properties dari komposit dilakukan uji tarik dan uji bending dengan metodologi yang sesuai ASTM E8 ( tensile ) dan ASTM E290 ( bending ), dan data diolah untuk mendapat mechanical properties yang sesuai ASTM F67 ( tensile ) dan ASTM F382 ( bending ). Hasil pengujian membuktikan peningkatan mechanical properties dari magnesium murni, dengan kadar 15% yang terbaik, tetapi diperlukan penelitian untuk meningkatkan mechanical properties secara keseluruhan agar lebih sesuai menjadi material miniplate.

Fracture cases in maxilla ( upper jaw ) or mandibula ( lower jaw ) can be fixed with a fixation of a miniplate. Commercially the material used is titanium because of high biocompability with human body and good mechanical properties. But actually titanium is not suitable because its young modulus is not the same as human bone ( probable fixation failure ) and its not biodegradeable. A suitable material thats often researched is magnesium because its biodegradeable and more suitable mechanical properties compared to human bone. But corrosion rate of magnesium is high, it is mandatory to give a extra treatment so fracture recovery can be optimal.
This research focuses on magnesium based composite as a way to reduce corrosion rate by adding carbonate apatite by 5%, 10%, and 15% in the powder metallurgy process. To figure the composite mechanical properties tensile testing and bend testing is done with methods approved by ASTM E8 ( tensile ) and ASTM E290 ( bending ), and data is processed to get mechanical properties based on ASTM F67 ( tensile ) and ASTM F382 ( bending ). Results shows a improvement of mechanical properties compared to pure magnesium with 15% being the best, but additional research is needed to improve overall mechanical properties so it is more suitable as a miniplate material.
"
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nur Aini
"Magnesium merupakan pilihan material yang dapat digunakan sebagai material implan tulang dengan karakteristik yang mirip dengan tulang, merupakan elektrolit normal dalam tubuh, memiliki harga yang ekonomis, dan bersifat dapat terdegradasi. Namun magnesium memiliki keterbatasan yaitu memiliki tingkat korosi yang tinggi. Untuk meningkatkan resistensi korosi dan memperbaiki sifat mekanis dikembangkan berbagai metode, salah satunya adalah proses Equal Channel Angular Pressing (ECAP). Persyaratan utama sebagai material implan tulang adalah bersifat biokompatibel. Tujuan: Mengevaluasi karakteristik biokompatibilitas magnesium yang telah melalui proses ECAP secara in vitro. Metode: Karakteristik biokompatibilitas magnesium ECAP dievaluasi melalui uji toksisitas terhadap sel osteoblas menggunakan MTT Assay, analisis logam berat yang terkandung di dalamnya dengan perhitungan paparan akumulatif logam berat berdasarkan provisional tolerable daily intake (PTDI),
serta uji sterilitas setelah melalui proses sterilisasi menggunakan autoclave. Hasil:
Tingkat proliferasi sel osteoblas dengan pemberian ekstrak magnesium ECAP lebih tinggi dibandingkan kelompok kontrol. Logam berat yang dihitung paparan akumulatifnya adalah aluminium, arsen, timbal, kadmium, dan merkuri. Paparan akumulatif logam berat 100% pada penggunaan magnesium ECAP 11,8297 g. Pada uji steriitas tidak ditemukan adanya pertumbuhan bakteri pada tiap tahapan pengujian. Kesimpulan: Magnesium ECAP bersifat tidak toksik, dan dapat merangsang pertumbuhan sel osteoblas dengan batas penggunaan maksimum
11,8297 g, serta steril.

Magnesium is the choice of material for bone implant with characteristic similiar to the bone, one of the normal elctrolytes in the body, have economical price, and degradable. However magnesium has limitation which is
high corosity rate. To improve corosion resistance and mechanical properties, many methods proposed, one of them is the Equal Channel Angular Pressing (ECAP). The important requirement for bone implant material is biocompatible. Purpose: To evaluate the biocompatibility of magnesium through Equal Channel Angular Pressing (ECAP) process in vitro. Method: Biocompatibility characteristics of magnesium ECAP was evaluated by toxicity test using MTT assay, analysis of heavy metals in magnesium ECAP by accumulative heavy metal exposure based on provisional tolerable daily intake (PTDI), also sterility test after sterilized using autoclave. Results: Cell proliferation rate in magnesium extract treatment group was higher than the control group. The heavy metals count for accumulative exposure were aluminium, arsenic, lead, cadmium, and mercury. Hundred percent of accumulative exposure was on the use of 11.8297 g magnesium ECAP. In sterility test there was no evidence of bacterial growth in every part of the test. Conclusion: Magnesium ECAP is not toxic and able to induce proliferation of osteoblast with maximum dose is 11.8297 g, and also proved sterile after sterilization using autoclave.
"
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2012
T33058
UI - Tesis Membership  Universitas Indonesia Library
cover
Dewin Purnama
"Untuk memenuhi kebutuhan perbaikan struktur lepas pantai yang rusak akibat korosi, kelelahan material, kesalahan selama perakitan, kesalahan konstruksi, dan beban operasional yang berlebihan, pengelasan bawah air dengan metode shielded metal arc welding (SMAW) adalah metode yang paling populer digunakan, karena ekonomis dan serbaguna serta memiliki efisiensi yang tinggi. Akan tetapi, metode las ini menghasilkan banyak cacat dalam bidang pengelasan, diantaranya porositas dan retak (cracks) yang disebabkan oleh kehadiran hidrogen dan oksigen dalam jumlah yang besar pada sambungan las dan kecepatan pendinginan yang tinggi. Metode yang memungkinkan untuk mengurangi atau mengontrol kandungan hidrogen dan oksigen adalah memodifikasi fluks dari elektroda dan memilih parameter pengelasan yang tepat. Penelitian ini dilakukan pada pengelasan bawah air dengan baja AH-36 yang umumnya digunakan sebagai material lambung kapal di industri maritim. Metode pengelasan menggunakan shielded metal arc welding (SMAW) dengan menggunakan elektroda E6013 yang dimodifikasi dengan tambahan magnesium (Mg) 1-5 wt.% dengan variasi heat input 1,5 dan 2,5 kJ/mm pada kedalaman 5 m. Tujuan penelitian ini adalah untuk meningkatkan kualitas lasan pada sambungan las baja AH-36 melalui proses pengelasan bawah air dengan metode SMAW dengan penambahan Mg pada elektroda E6013. Untuk mengetahui kualitas hasil lasan digunakan metode non destructive test (NDT) yaitu: penetrant test (PT) dan radiography test (RT). Karakterisasi hasil lasan menggunakan scanning electron microscope/energy dispersive x-ray spectroscopy (SEM/EDS) dan mikroskop optik, karakterisasi material dan elektroda menggunakan optical emission spectroscopy dan x-ray diffraction (XRD), untuk mengetahui sifat mekaniknya dilakukan pengujian tarik, uji kekerasan dan uji impak. Hasil pengamatan struktur mikro menunjukkan bahwa tambahan magnesium sampai 5% berat pada fluks elektroda E6013 dapat meningkatkan proporsi dari acicular ferrite (AF) dan polygon ferrite (PF) serta mengurangi dominasi struktur mikro yang bersifat getas. Peningkatan jumlah AF dalam struktur mikro akan meningkatkan nilai kekuatan serta memperbaiki ketangguhan impaknya sehingga akan didapatkan weldability yang lebih baik. Selain itu tambahan magnesium dapat mencegah kehilangan kandungan mangan dan silikon di weld metal (WM). Oleh karena itu sampel hasil eksperimen dengan tambahan magnesium 5% berat pada fluks elektroda E6013 dengan masukan panas 1,5 kJ/mm adalah sampel yang memiliki ketangguhan impak paling optimum apabila dibandingkan dengan sampel lainnya yang dilas dengan tambahan magnesium, karena analisis statistik dengan ANOVA, energi impak di weld metal dan HAZ tidak terdapat perbedaan nilai rata-rata nya

To fulfill the need of offshore structures repairing that has been damaged due to corrosion, material fatigue, failure of assembling, misconstruction, and over operating loads, underwater welding with the shielded metal arc welding (SMAW) is the most popular method that been used. This is, because SMAW is the most economical and versatile method with high efficiency. However, this welding method produces many defects in the welding, including porosity and cracks caused by the presence of large amounts of hydrogen and oxygen in the weld joint and high-speed cooling. A possible method to reduce or control the hydrogen and oxygen content is to modify the flux of the electrodes and select the appropriate welding parameters. This research was conducted on underwater welding with AH-36 steel which is generally used as a hull material in the maritime industry. The welding method uses shielded metal arc welding (SMAW) using modified E6013 electrodes with 1-5%.wt magnesium addition with a heat input variation of 1.5 and 2.5 kJ / mm at a depth of 5 m. The purpose of this study was to improve the quality of the welds on the AH-36 steel welded joints through the underwater welding process using the SMAW method with the addition of magnesium to the E6013 electrode. To determine the quality of the welds, the NDT method was used, namely: penetrant test (PT) and radiography test (RT). The weld was characterized using scanning electron microscope/energy dispersive x-ray spectroscopy (SEM/EDS) and optical microscopy. Materials and electrodes were characterized using optical emission spectroscopy and x-ray diffraction (XRD), whereas to determine the mechanical properties, tensile testing, hardness test and impact test were performed. The results of microstructure observations showed that the addition of magnesium up to 5 wt.% on the flux of the E6013 electrode could increase the proportion of acicular ferrite (AF) and polygon ferrite (PF) and reduce the dominance of brittle microstructure. Increasing the number of AF in the microstructure would increase the strength and improve the impact toughness and thus a better weldability would be obtained. In addition, the addition of magnesium can prevent the loss of Mn and Si content in the weld metal (WM). Therefore, the experimental sample with additional 5 wt.% magnesium on the flux of the E6013 electrode with heat input 1,5 kJ/mm is the optimum impact toughness sample that has been compared to other samples that are welded with the additional magnesium,due to statistical analysis by ANOVA, there is no difference in the average value of the impact energy in weld metal and HAZ."
Depok: Fakultas Teknik Universitas Indonesia, 2022
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Srikandi Wahyu Arini
"Batu bata menggunakan tanah sebagai bahan baku utamanya, namun bata yang terbuat hanya dari tanah memiliki performa yang kurang baik. Dalam rangka membuat batu bata sebagai material yang lebih ramah lingkungan dan memiliki performa yang lebih baik maka dilakukan kajian karakteristik sifat fisik dan mekanik batu bata pembakaran dengan tambahan 4% sabut kelapa berukuran 2,5 cm yang telah di diolah dan di curing dalam tiga kondisi perawatan. Berdasarkan hasil pengujian sifat fisik dan mekanik bata, didapatkan bahwa penambahan 4% serabut kelapa berukuran 2,5 cm yang telah diolah meningkatkan sifat mekanik bata pada semua kondisi curing namun tidak semua sifat fisik meningkat.

Batu bata menggunakan tanah sebagai bahan baku utamanya, namun bata yang terbuat hanya dari tanah memiliki performa yang kurang baik. Dalam rangka membuat batu bata sebagai material yang lebih ramah lingkungan dan memiliki performa yang lebih baik maka dilakukan kajian karakteristik sifat fisik dan mekanik batu bata pembakaran dengan tambahan 4% sabut kelapa berukuran 2,5 cm yang telah di diolah dan di curing dalam tiga kondisi perawatan. Berdasarkan hasil pengujian sifat fisik dan mekanik bata, didapatkan bahwa penambahan 4% serabut kelapa berukuran 2,5 cm yang telah diolah meningkatkan sifat mekanik bata pada semua kondisi curing namun tidak semua sifat fisik meningkat.
"
Depok: Fakultas Teknik Universitas Indonesia, 2014
S61442
UI - Skripsi Membership  Universitas Indonesia Library
cover
Suryadi
"The present study investigated the mechanical properties and microstructure of ultrafine grained (UFG) brass processed by four passes of equal channel angular pressing (ECAP) and annealed at elevated temperatures. The mechanical properties of all samples were assessed using tensile and micro-hardness tests. Microstructure analysis was performed using optical microscopy (OM) and scanning electron microscopy (SEM). Ultimate tensile strengths (UTS) and yield strengths (YS) of 878 and 804 MPa, respectively, ductility of 15%, and hardness of 248 HV were obtained for samples processed by four passes of ECAP with equivalent true strain of 4.20. Annealing at 300°C caused UTS and YS to decrease significantly, to 510 and 408 MPa, respectively, ductility to increase to 28%, and hardness to decrease to 165 HV. Fractography analysis of un-annealed samples after four ECAP passes showed small brittle fractures with shallow dimpling. Ductile failures were found on annealed samples. After four ECAP passes, the microstructure of un-annealed samples was UFG and dominated by lamellar grain with shear band. In contrast, after annealing, the microstructure changed due to recrystallization, showing nucleation and grain growth."
Depok: Faculty of Engineering, Universitas Indonesia, 2017
UI-IJTECH 8:1 (2017)
Artikel Jurnal  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>