Hasil Pencarian  ::  Simpan CSV :: Kembali

"This book presents a comprehensive knowledge-set of matrix, fiber and interphase behavior under long-term aging conditions, theoretical modeling and experimental methods. This book covers long-term constituent behavior, predictive methodologies, experimental validation and design practice. Readers will also find a discussion of various applications, including aging air craft structures, aging civil infrastructure, in addition to engines and high temperature applications."

"Penggunaan serat alami seperti serabut kelapa pada bahan semen memodifikasi sifat reologi dari bahan pada kondisi segar dan sifat mekanik pada kondisi keras. Sifat fisik dan kimia dapat mengubah interface antara serat dan matriks selama pengerasan. Pada penelitian ini dilakukan pengujian terhadap matriks dan serat yang digunakan. Kemudian dilakukan proses fabrikasi sampel. Langkah terakhir dipelajari pengaruh beban yang diterapkan pada matriks terhadap ikatan antara matriks dan serat. Hasil pengujian menunjukkan bahwa penambahan serabut dalam air yang digunakan dalam pasta menurunkan kekuatan matriks. Sedangkan adhesi antara makriks dengan serat meningkat seiring dengan meningkatnya konsolidasi matriks.

---

The use of natural fibers such as coconut fiber in cementitious materials modifies the rheological properties of the fresh material and mechanical properties in the hardened state. Its physical and chemical properties can modify the interface between fiber and matrix during hardening. Initially the study and presentation of matrix and fiber used are provided. Then the process of samples fabrication is presented. In the last step, the influence of the load applied on the matrix to the adhesion between the matrix and fibers. Test results show that the addition of coir in the water used in the paste decreases the strength of matrix and the fiber-matrix adhesion increases with the growth of the matrix consolidation."

"This book, addresses the wide range of parameters that affect the interaction of fluids with polymers and polymeric composites. The book aims at broadening the scope of available data, mostly limited up to this time to weight-gain recordings of fluid ingress into polymers and composites, to the practical circumstances of fluctuating exposure. Various forms of experimental data are given, in conjunction with theoretical models derived from basic scientific principles, and correlated with severity of exposure conditions and interpreted by means of rationally based theoretical models. The practical implications of the effects of fluids are discussed.The issue of fluid effects on polymers and polymeric composites is of concern to engineers and scientists active in aerospace and naval structures, as an increasing portion of these structures are made of polymeric composites and employ polymeric adhesives as a joining device. "

"Advanced fibre-reinforced polymer (FRP) composites have become essential materials for the building of new structures and for the repair of existing infrastructure. Advanced fibre-reinforced polymer (FRP) composites for structural applications provides an overview of different advanced FRP composites and the use of these materials in a variety of application areas.Part one introduces materials used in the creation of advanced FRP composites including polyester, vinylester and epoxy resins. Part two goes on to explore the processing and fabrication of advanced FRP composites and includes chapters on prepreg processing and filament winding processes. Part three highlights properties of advanced FRP composites and explores how performance can be managed and tested. Applications of advanced FRP composites, including bridge engineering, pipe rehabilitation in the oil and gas industry and sustainable energy production, are discussed in part four."

"Tribology of polymeric nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications.Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in action in tribological applications."

"Optical microscopy is one of the most valuable?but under utilized?tools for analyzing fiber reinforced polymer matrix composites. This hands-on instructional book covers everything; sample preparation, microscopic techniques, and applications. The power of optical microscopy to study the microstructure of these heterogeneous, anisotropic materials is illustrated with over 180 full color images."

"The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas.Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four.With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field."

"Machining of metal matrix composites gives the reader information on machining of MMCs with a special emphasis on aluminium matrix composites. Chapter 1 provides the mechanics and modelling of chip formation for traditional machining processes. Chapter 2 is dedicated to surface integrity when machining MMCs. Chapter 3 describes the machinability aspects of MMCs. Chapter 4 contains information on traditional machining processes and chapter 5 is dedicated to the grinding of MMCs. Chapter 6 describes the dry cutting of MMCs with SiC particulate reinforcement. Finally, chapter 7 is dedicated to computational methods and optimization in the machining of MMCs."