Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 114614 dokumen yang sesuai dengan query
cover
Imaduddin Haq
"Pembentukan pirolisis yang keberlanjutan (sustainable pyrolysis) adalah kunci dari keberhasilan proses gasifikasi. Zona pirolisis pada proses gasifikasi merupakan akibat reaksi endotermis yang mendapatkan energi panas dari proses oksidasi (combustion) antara bahan bakar dengan oksigen. Perekahan biomassa sekam padi hasil pirolisis yang berupa arang, uap air, uap tar, dan gas - gas (CO, H2, CH4, CO2, dan N2) harus dijaga pada temperatur pirolisis untuk mendapatkan gas hasil (producer gas) atau syngas (synthetic gas) yang berlimpah. Keberhasilan proses gasifikasi diperoleh dengan mendapatkan debit syngas secara kontinyu dan diindikasikan oleh konsistensi nyala api pada gas burner. Hal ini sangat dipengaruhi oleh faktor pengoperasian gasifier dan kesetimbangan massa (mass balance) antara feeding rate sekam padi dengan laju pembuangan abu (ash removal rate). Eksperimental yang dilakukan adalah menggunakan gasifier tipe downdraft fixed bed kapasitas 10 kg/jam dimana sebelum terjadinya modifikasi gasifier pada sistim pembuangan abu sekam padi sangat sulit untuk mendapatkan kontinuitas syngas. Kekurangstabilan laju alir syngas diperkirakan adanya akumulasi abu sisa gasifikasi pada zona combustion dan plenum chamber.
Dengan melihat zona pirolisis yang terjadi pada temperatur antara 400 - 800 oC terlihat laju temperatur yang cepat yang mengakibatkan tidak stabilnya proses pirolisis sehingga didapat kurangnya debit syngas. Selain itu, pengaturan (laju) massa sekam padi yang masuk kedalam gasifier dan pengaturan pembuangan abu dapat mempengaruhi sustainability proses pirolisis. Modifikasi sistim pembuangan abu dan angsang (grate) abu dapat mempermudah pengaturan sejumlah massa abu yang dikeluarkan sehingga dapat mengendalikan zona temperatur pirolisis dengan baik.
Kajian eksperimental dilakukan untuk mengetahui pengaruh jumlah massa abu sekam padi yang dibuang terhadap sustainability zona pirolisis. Didapat bahwa jumlah abu sekam padi yang dibuang sebesar 60 ? 90 gram per satu kali pembuangan (operasi sistim ash removal) untuk setiap 20 menit atau rata ? rata laju pembuangan abu sekam sebesar 5 gram/menit. Dari beberapa eksperimental ini, diharapkan dapat terlihat fenomena proses gasifikasi sekam padi dan pengaruhnya terhadap zona pirolisis akibat pembuangan sejumlah massa abu sekam padi. Sehingga penelitian ini dapat menemukan suatu korelasi untuk mendapatkan unjuk kerja (performance) gasifier yang optimal.

The establishment of sustainable pyrolysis is key to the success of the gasification process. Pyrolysis zone in the gasification process is the result of an endothermic reaction that get hot energy from the oxidation process of the fuel with oxygen. Cracking of rice husk biomass pyrolysis results in the form of charcoal, water vapor, tar vapors, and gases (CO, H2, CH4, CO2, and N2) must be maintained at a pyrolysis temperature to obtain synthetic gas (syngas) with plantyful harvest. Success of the gasification process to obtain syngas continuously and are indicated by the consistency of the flame on a gas burner. It is highly influenced by the operation of the gasifier and the mass balanced beetwen rice husk feeding rate and ash removal rate. The experiment was performed under gasifier downdraft fixed bed type with capacity 10 kg/hour, previously to the modification of the gasifier on rice husk ash removal system is very difficult to obtain syngas. Unstable syngas flow rate is estimated from the accumulation of ash residue gasification process of combustion area and plenum chamber.
By looking at the pyrolysis zone occurs at temperatures between 400 ? 800 oC seen rapidly of temperature rate results in insteability of the pyrolysis process in order to get a lack of producer gas. Besides of setting rice husk rate into the gasifier and ash removal rate arrangements affecting sustainable pyrolysis process. Ash removal system modifications can facilitate setting a mass of ash removed so that it can control the pyrolysis temperature zone well.
The experimental study was conducted to determine the effect of mass quantities of rice husks ash is removed towards sustainability pyrolysis zone. Founded that the amount of rice husk ash removed are 60-90 grams per one removal for every 20 minutes or an average of rice husk ash removal rate of 5 gr/minutes. Some of this experimental phenomena is expected to be seen rice husks gasification process and its effect on the pyrolysis zone as a results of the removing of a mass of rice husks ash. So that this research can be find a correlation to obtain optimal performance of the gasifier.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
T45410
UI - Tesis Membership  Universitas Indonesia Library
cover
Hafif Dafiqurrohman
"Sekam padi menjadi salah satu limbah biomassa yang melimpah di Indonesia. Salah satu cara konversi sekam padi menjadi energi alternatif adalah gasifikasi biomassa. Gasifikasi biomassa merupakan proses termokimia untuk mengonversi bahan baku biomassa menjadi bahan bakar gas atau bahan baku gas kimia (producer gas). Gasifikasi biomassa yang tengah dikembangkan adalah tipe fixed bed downdraft. Tipe ini dipilih karena hasil tar yang sedikit dan cocok untuk skala mikro. Salah satu permasalahan dari desain reaktor gasifikasi biomassa yang digunakan adalah kurang meratanya proses oksidasi parsial, sehingga memengaruhi zona pirolisis. Proses oksidasi parsial yang kurang merata ini disebabkan oleh pada bagian tengah reaktor tidak tersuplai udara dengan merata.
Pada penelitian sebelumnya yang menggunakan cangkang kelapa dan sekam padi, equivalence ratio (ER) untuk proses gasifikasi adalah 0,4. Maka untuk melakukan optimasi zona pirolisis, dilakukan modifikasi air intake dengan menambahkan circular air intake. Setelah dilakukan modifikasi dan pengujian pada temperatur operasional zona pirolisis 300-700 oC, dengan melakukan variasi ER yaitu 0,19, 0,24, 0,27, dan 0,31, akhirnya didapatkan ER paling optimal untuk menghasilkan producer gas dengan kualitas baik yaitu pada ER 0,24. ER paling optimal ini sesuai dengan standar gasifikasi biomassa, yaitu sekitar 0,25.

Rice husks into one of abundant biomass waste in Indonesia. One way of converting rice husks into alternative energy is biomass gasification. Biomass gasification is a thermochemical process to convert biomass feedstock into fuel gas or chemical feedstock gas (producer gas). Gasification of biomass that is being developed is a type of fixed bed downdraft. This type is chosen because the results were a little tar and suitable for the micro scale. One of the problems of biomass gasification reactor design used is less inequality partial oxidation process, thus affecting the pyrolysis zone. Partial oxidation process is uneven due to the middle part of the reactor is not well supplied with evenly distributed air.
Previous studies using coconut shells and rice husks, equivalence ratio (ER) for the gasification process is 0.4. Then to optimize the pyrolysis zone, be modified by adding circular air intake. After the modification and testing the operating temperature pyrolysis zone of 300-700 °C, by doing ER variation is 0.19, 0.24, 0.27, and 0.31, eventually obtained the most optimal ER to produce gas producer with good quality, namely the ER 0.24. This ER is the most optimized according to the standard gasification of biomass, which is about 0.25.
"
Depok: Fakultas Teknik Universitas Indonesia, 2015
S59768
UI - Skripsi Membership  Universitas Indonesia Library
cover
F.X. Eko Arianto
"Potensi biomassa di Indonesia sangat melimpah baik dari limbah hewan maupun tumbuhan. Limbah pertanian dan perkebunan yang cukup besar dapat dimanfaatkan sebagai sumber energi. Salah satunya adalah sekam padi. Pada eksperimen ini pemanfaatan energi dari sekam padi dilakukan dengan metode gasifikasi menggunakan downdraft gasifier untuk mengubahnya menjadi gas-gas mampu bakar yang selanjutnya akan dibakar pada cyclone combustor. Keuntungan menggunakan metode gasifikasi dibandingkan pembakaran langsung adalah pembakaran lebih bersih, partikulat dan kontaminan dapat dihilangkan sebelum dibakar. Cyclone combustor dapat menghasilkan pencampuran yang baik sehingga cocok digunakan untuk gas dengan nilai kalor rendah.
Komposisi syngas yang dihasilkan dari gasifikasi sekam padi adalah H2 13,6%, CO 14,9%, CO2 12,9% dan CH4 2,3% [1]. Setelah melewati cyclone separator untuk menghilangkan uap air dan kontaminan kemudian masuk ke storage tank yang selanjutnya masuk ke dalam cyclone combustor untuk dibakar setelah dicampur dengan udara melalui inlet yang berbeda. Kemudian akan divariasikan dengan berbagai AFR untuk mengetahui perubahan temperatur api, letak api pada combustor dan bentuk apinya. Dari hasil eksperimen pada AFR = 1,59 terletak di dalam combustor pada daerah antara plane 1 dan 2, AFR = 1,14 api terletak di dalam pada plane 2, AFR = 0,69 api terletak di dalam pada plane 3 sedangkan pada AFR = 0,27 tidak terbentuk api di dalam tetapi di luar setelah bercampur dengan udara luar.

Biomass potential in Indonesia is very abundance whether from animal or plant waste. Farming and plantation waste that abundance enough can be utilized as energy sources. One of them is rice husk. On this experiment energy utilization of rice husk was used gasification method with downdraft gasifier to convert it to combustible gases which would be burn in a cyclone combustor. The advantages of gasification method compare to direct combustion are cleaner combustion and particulates and contaminants can be eliminated prior to burn. Cyclone combustor can generate a good mixing then suitable to use for gases with low calorific value.
Composition of syngas that produced by gasification of rice husk are H2 13,6%, CO 14,9%, CO2 12,9% dan CH4 2,3% [1]. After syngas leaves the reactor it enter cyclone separator to eliminate water vapor and contaminants and then goes to the storage tank and finally goes to cyclone combustor to be burned after mixed with air through different inlet. After that different value of AFR would be varied to see the change of flame temperature, flame postion in combustor and flame shape. Kemudian akan divariasikan dengan berbagai AFR untuk mengetahui perubahan temperatur api, letak api pada combustor dan bentuk apinya. From the result of eksperimen at AFR = 1.59 the flame in the combustor beetween plane 1 and 2, at AFR = 1.14 the flame in the combustor at plane 2, at AFR = 0.69 the flame in the combustor beetween plane 3 and at AFR = 0.27 the flame on the outside of the combustor after mixed with fresh air.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
T46556
UI - Tesis Membership  Universitas Indonesia Library
cover
Davina Athira Xanthi
"Sekam padi merupakan limbah yang dihasilkan dari penggilingan padi, namun kurangnya pemanfaatan dan tingginya kandungan lignin pada sekam padi membuatnya berpotensi besar untuk dimanfaatkan menjadi elektroda superkapasitor. Elektroda superkapasitor dapat menyimpan energi dalam bentuk muatan listrik yang dipisahkan oleh bahan dielektrik, serta memiliki nilai energi spesifik dan daya spesifik yang tinggi. Dalam penelitian ini, sekam padi akan diubah menjadi biochar melalui proses pirolisis dengan adanya impregnasi asam borat dan logam Fe. Pemilihan asam borat dan logam Fe dilakukan karena keduanya dapat meningkatkan karakteristik biochar, seperti perluasan permukaan dan pembentukan pori yang dapat meningkatkan kinerja superkapasitor. Penelitian ini mencakup variasi waktu aktivasi dan jumlah bahan impregnasi pada biomassa untuk memahami pengaruhnya terhadap karakteristik biochar yang dihasilkan. Kandungan asam borat dan logam Fe divariasikan sebanyak 0%, 10%, dan 15%, sementara waktu aktivasi divariasikan antara 90 menit dan 120 menit. Selain itu, dilakukan variasi konsentrasi elektrolit KOH untuk memahami pengaruhnya terhadap kinerja superkapasitor. Konsentrasi elektrolit KOH divariasikan menjadi 4 M, 5 M, dan 6 M. Hasil penelitian terbaik dari uji Cyclic Voltammetry diperoleh pada sampel AS10%-A120-6M. Ini menunjukkan bahwa waktu aktivasi selama 120 menit dan konsentrasi elektrolit sebesar 6 M dapat mempengaruhi nilai kapasitansi tertinggi yang dicapai, yaitu 198,5 F/g pada scan rate 10 mV/s. Nilai band gap energy untuk H3BO3 10% adalah 1,35 eV dan untuk Fe 10% adalah 1,55 eV. Nilai ini berada dalam rentang yang sesuai untuk superkapasitor sehingga dapat meningkatkan performa kapasitansi dengan konfigurasi asimetris.

Rice husks are waste produced from rice milling, but the lack of utilization and high lignin content in rice husks make it have great potential to be used as supercapacitor electrodes. Supercapacitor electrodes can store energy in the form of electric charges separated by a dielectric material, and have high specific energy and specific power values. In this research, rice husks will be converted into biochar through a pyrolysis process with impregnation of boric acid and Fe metal. Boric acid and Fe metal were chosen because both can improve biochar characteristics, such as surface expansion and pore formation which can improve supercapacitor performance. This research includes variations in activation time and the amount of impregnating material in the biomass to understand its effect on the characteristics of the biochar produced. The content of boric acid and Fe metal was varied by 0%, 10%, and 15%, while the activation time was varied between 90 minutes and 120 minutes. In addition, variations in KOH electrolyte concentration were carried out to understand its effect on supercapacitor performance. The KOH electrolyte concentration was varied to 4 M, 5 M, and 6 M. The best research results from the Cyclic Voltammetry test were obtained on the AS10%-A120-6M sample. This shows that an activation time of 120 minutes and an electrolyte concentration of 6 M can influence the highest capacitance value achieved, namely 198.5 F/g at a scan rate of 10 mV/s. The band gap energy value for 10% H3BO3 is 1.35 eV and for 10% Fe is 1.55 eV. This value is in the appropriate range for supercapacitors so that they can improve capacitance performance with asymmetric configurations."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Andika Akbar Hermawan
"Gasifikasi biomassa adalah proses konversi bahan baku biomassa padat menjadi bahan bakar gas yang dapat dibakar combustible gas dengan suplai udara yang terbatas Basu, 2010. Gas mampu bakar dan tidak mampu bakar producer gas yang berasal dari gasifikasi biomassa mengandung pengotor atau kontaminan partikel dan organik, seperti tar, yang jika tidak dihilangkan dapat menyebabkan masalah operasional yang sangat berat Hasler Nussbaumer, 1999. Venturi Scrubber terbukti efektif untuk menghilangkan pengotor atau kontaminan partikel dan organik, seperti tar Thana, 2010 . Pada penelitian ini pengaruh rasio laju air scrubbing liquid dari venturi scrubber terhadap laju producer gas Ql/Qg telah teridentifikasi. Efek dari rasio tersebut dapat terlihat berdasarkan tiga parameter yaitu penurunan suhu, perubahan tekanan dan efisiensi penangkapan tar. Rasio Ql/Qg = 0.040 telah diketahui sebagai penyumbang penurunan suhu terbesar yaitu sebesar 39.91o C dan perubahan tekanan terbesar yaitu 1004.72 Pa. Namun, hal ini belum tentu sebanding dengan performa penangkapan tar. Dalam penelitian ini, ditemukan Ql/Qg = 0.014 telah ditemukan sebagai titik optimal dalam penangkapan tar, dimana efisiensi penangkapan tar pada rasio tersebut mencapai 88.

Biomass gasification is the process of converting raw solid biomass materials into combustible gas fuels with a limited air supply Basu, 2010 . Gas capable of burning and incapable of fuel gas producer derived from biomass gasification contains impurities or particulate and organic contaminants, such as tar, which, if not eliminated, can cause severe operational problems Hasler Nussbaumer, 1999. Venturi Scrubber is proven to be effective for removing impurities or particulate and organic contaminants, such as tar Thana, 2010. In this study, the effect of the ratio of the rate of liquid scrubbing water from the venturi scrubber to the gas producer rate Ql Qg has been identified. The effect of these ratios can be seen based on three parameters temperature drop, pressure change and tar capture efficiency. The ratio Ql Qg 0.040 has been known as the largest contributor to the temperature drop of 39.91o C and the largest pressure change is 1004.72 Pa. However, this is not necessarily proportional to tar fishing performance. In this study, found Ql Qg 0.014 has been found as an optimal point in tar fishing, where tar capture efficiency at the ratio reached 88.
"
Depok: Fakultas Teknik Universitas Indonesia, 2017
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Hafif Dafiqurrohman
"Rice husk is one of the most abundant biomass wastes in Indonesia. One way to convert it into an alternative source of energy is biomass gasification. This is a thermochemical process which converts biomass feedstock into fuel gas or chemical feedstock gas (producer gas). The gasification type which is developed in this study is fixed bed downdraft type due to its low tar content and compatibility in microscale implementation. One major problem with the implemented biomass gasification reactor was ruggedness of the partial oxidation process due to the absence of air in the reactor’s middle section, which consequently affected the pyrolysis zone. Several experiments were conducted previously using coconut shells and rice husks as solid feedstock, where an equivalence ratio (ER) of 0.4 was obtained. Therefore, in order to optimize the pyrolysis zone, the modification conducted involves adding a circular air intake into the gasifier. Experiments were conducted in a pyrolysis temperature range of 300–700oC with ER variation of 0.19, 0.24, 0.27 and 0.31. The results show that a good quality producer gas is produced at an ER value of 0.24. This value shows a promising result because the ER value of biomass gasification standard is 0.25."
Depok: Faculty of Engineering, Universitas Indonesia, 2017
UI-IJTECH 7:8 (2016)
Artikel Jurnal  Universitas Indonesia Library
cover
Fildza Salma Aninditha
"

Tingkat konsumsi nasi yang tinggi di Indonesia menuntut adanya tingkat produksi beras yang tinggi pula yang tentunya akan menghasilkan limbah. Salah satu limbah industri beras yang kurang pemanfaatannya adalah abu sekam padi. Abu sekam padi memiliki kandungan silika yang tinggi sehingga marak dilakukannya penelitian mengenai ekstraksi silika dengan sekam padi atau abu sekam padi sebagai sumbernya. SiO2 yang didapatkan dari ekstraksi abu sekam padi memiliki banyak manfaat, salah satunya adalah sebagai material pendukung yang dapat meningkatkan performa fotokatalis. Dalam penelitian ini, SiO2 yang diekstrak dari abu sekam padi disintesis bersama dengan g-C3N4 untuk membentuk komposit g-C3N4/SiO2. Komposit g-C3N4/SiO2 hasil sintesis dikarakterisasi menggunakan SEM/EDX (Scanning Electron Microscopy/Energi-Dispersive X-Ray), UV-Vis DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy), dan FT-IR (Fourier Transform Infra-Red). Pengujian sifat swa-bersih dan anti-kabut komposit dilakukan dengan mengukur sudut kontak menggunakan contact angle meter dan menghitung pengurangan pengotor. Hasil uji menunjukkan bahwa g-C3N4/SiO­2 dengan rasio 1:1 memiliki hasil paling optimal dengan sudut kontak terkecil, yaitu 3°, dan pengurangan pengotor terbanyak, yaitu 66,5%.


The high level of rice consumption in Indonesia demands a high level of rice production which of course will produce waste. One of the wastes in rice industry that is still underutilized is rice husk ash. Rice husk ash has a high silica content, so there is a lot of research on silica extraction using rice husk ash or rice husk ash as the source. SiO2 obtained from rice husk ash extraction has many benefits, one of which is as a supporting material that can improve photocatalyst performance. In this study, SiO2 extracted from rice husk ash was synthesized together with g-C3N4 to form a g-C3N4/SiO2 composite. The synthesized SiO2/g-C3N4 composite was characterized using SEM/EDX (Scanning Electron Microscopy/Energy-Dispersive X-Ray), UV-Vis DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy), and FT-IR (Fourier Transform Infra-Red). Testing of the self-cleaning and anti-fog properties of the composite was carried out by measuring the contact angle using a contact angle meter and calculating the reduction in impurities. The test results show that g-C3N4/SiO2 with a ratio of 1:1 has the most optimal results with the smallest contact angle, which is 3°, and the highest reduction of impurities, which is 66,5%.

"
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Devanand Dwangga Rheza Kumara
"Biomassa merupakan salah satu jenis sumber energi yang paling banyak digunakan di sektor pembangkit energi baru dan terbarukan. Salah satu contoh biomassa adalah sekam padi, produk sampingan dari beras, komoditas pertanian yang banyak diproduksi dan tersedia di Indonesia. Salah satu cara untuk menghasilkan energi dari sekam padi adalah dengan menggunakannya sebagai bahan baku dalam gasifier, menggunakan proses termokimia yang disebut gasifikasi untuk menghasilkan gas yang mudah terbakar. Tujuan utama dari penelitian ini adalah untuk mensimulasikan model proses gasifikasi dalam top-lit updraft gasifier, menggunakan sekam padi sebagai bahan baku biomassa. Simulasi akan dilakukan untuk menemukan pengaruh variasi udara yang disuplai ke dalam gasifier, pada komposisi syngas dari model simulasi Aspen Plus yang dikembangkan.

Biomass is one of the most widely used types of energy source in the new and renewable energy generation sector. One example of biomass is rice husk, a by-product of rice, an agricultural commodity which is widely produced and available in Indonesia. One of the ways to generate energy from rice husks, is to use them as a biomass feedstock in a gasifier using a thermochemical process called gasification in order to produce flammable gas. The main aim of this research is to simulate a model of a gasification process in a top-lit updraft gasifier, using rice husk as the biomass feedstock. The simulation will be done to find the effects of varying the air supplied into the gasifier, on the syngas compositions resulted by the developed Aspen Plus simulation model."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rahadhian Adhitya Gangga
"Pada penelitian ini, ingin dilihat pengaruh akivasi kimia dan fisika pada pembuatan karbon aktif berbahan baku sekam padi. Aktivasi kimia dilakukan dengan mengimpregnasi arang sekam dengan KOH dengan rasio massa arang sekam dan KOH 1:4 (berat kering). Dan aktivasi fisika dilakukan dengan mengalirkan gas N2 100 mL/ min dan gas CO2 yang divariasikan 100, 200, 300, dan 400 mL/min pada suhu 800°C selama 1 jam. Bilangan iod tertinggi didapatkan dari karbon yang diaktivasi kimia fisika dengan laju N2 100 mL/min dan CO2 100 mL/min yaitu sebesar 793,04 mg/g, sedangkan bilangan iod terendah didapatkan pada karbon ayang diaktivasi kimia fisika yang dialirkan N2 100 mL/min saja 583,26 mg/g. Sebagai pembanding, juga dilakukan pembuatan karbon aktif dengan metode aktivasi fisika saja dan kimia saja. Untuk karbon yang diaktivasi fisika saja dan kimia saja diperoleh bilangan iodin karbon aktif sebesar 421,09 mg/g dan 496,09 mg/g. Karbon aktif yang memiliki bilangan iod tertinggi memiliki kadar air 13,062 %, kadar abu 8,588 %, dan bagian yang hilang pada pemanasan 950°C 23,123 %.

The main purpose of this study is want to see the influence of chemical and physical activation in producing activated carbon made from rice husk. The chemical activation was done by KOH impregnation on rice husk that had been carbonized with a mass ratio of rice husk charcoal and KOH 1:4 (dry weight). And physical activation was done by flewing N2 gas 100 mL / min and CO2 with flow rate varied 100, 200, 300, and 400 mL / min at a temperature of 800°C for 1 h. The highest iodine number of activated carbon obtained from chemical physics at a rate of N2 100 mL / min and CO2 100 mL / min, that is 793,04 mg / g, while the lowest iodine number obtained on activated carbon yang physical chemistry N2 flow 100 mL / min only 583.26 mg / g. For comparison, also made the activated carbon made by physical activation only method and chemistry only. For activated carbon that made by physical and chemical activation only just acquired iodine number at 421,09 mg / g and 496,09 mg / g. Activated carbon that has the highest iodine number has 13,062% moisture content, ash content 8,588%, and the missing parts on heating 950°C 23,123%."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52432
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Azka Fariky
"Komoditas utama di sektor pertanian Indonesia adalah padi, yang juga merupakan tanaman pokok di negeri ini sehingga limbah yang dihasilkan juga akan sangat banyak. Untuk mengatasi hal seperti ini, maka pengolahan limbah sekam padi kerap dilakukan. Sekam padi mengandung 50% selulosa, 25 ?30 % lignin, dan 15 ?20 % silika. Kandungan silika ini yang nantinya akan berharga setelah diolah lebih lanjut, setelah dilakukan pemanggangan sempurna sekam padi mengandung sekitar 90%-98% silika.
Pada penelitian ini pengolahan sekam padi dilakukan dengan metode pelindian pada larutan HCl 1 M selama 3 jam, kemudian di recovery dan dilanjutkan pemanggangan dengan variasi laju temperaturnya 3C/min., 5C/min., dan 7C/min. hingga 650C dan ditahan selama 4 jam. Hasil penelitian didapatkan dengan variasi laju temperaturnya 3C/min., 5C/min., dan 7C/min silika dengan kadar 99,170%, 99,038%, dan 98,966%. Proses pelindian dan pemanggangan akan menghilangkan komponen-komponen organik dan logam pengotor-pengotor di dalamnya, dan apabila diamati morfologinya, sekam padi yang telah diberi perlakuan strukturnya akan lebih halus dan berporos.

The main commodities in the agricultural sector of Indonesia is rice, which is also a staple crop in this country so that the waste generated will also be very much. To cope with this kind of thing, then the rice husk waste treatment is often done. Rice husks contain 50% cellulose, 25% lignin -30 and 15 -20% silica. The silica content of which will be valuable when processed further, after perfect roasting rice husk contains about 90% -98% silica.
In this study, rice husk processing is done by the method of leaching in 1 M HCl solution for 3 hours, then recovered and continued roasting by the temperature rate variation of 30C/min., 50C/min., and 70C/min until reaching 6500C and held for 4 h. Research results obtained by varying the temperature rate of 30C/min., 50C/min., and 70C/min with silica content of 99.170%, 99.038% and 98.966%. Leaching and roasting process will eliminate the components of organic and metallic impurities in it, and if the morphology was observed, rice husk which has been treated to be more delicate and highly porous structure.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S62829
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>