Hasil Pencarian  ::  Simpan CSV :: Kembali

"In recent years, much attention has been focused on biodegradable polymers from renewable resources. Due to its availability and low cost, starch is a promising candidate among biopolymers for use in biodegradable packaging materials and for other purposes. Starch-Based Polymeric Materials and Nanocomposites: Chemistry, Processing, and Applications presents the latest developments in starch chemistry, rheology, starch derivatives, starch-based nanocomposites, and their applications.Topics discussed include:The chemistry, microstructure, processing, and enzymatic degradation of starchThe importance and role of starch as a gelling agentPlasticization and the role of plasticizersVarious rheological techniques applied to starch-related products and the characteristics of starch dispersionsPolymeric aspects of reactive extrusion (REX) and its use on starch and other biopolymersCyclodextrins (CDs) and their industrial applications, and CD-based supramole and polymersThe potential of starch in food packaging, edible packaging, feedstock for bioproducts, and industrial and consumer productsThe theoretical basis and derivation of the mathematical model for multicomponent systems and its solution algorithmThe book also explores recent progress in biodegradable starch-based hybrids and nanomaterials and the incorporation of nanoparticles in starches to enhance their mechanical and thermal properties. The book concludes by discussing the use of biopolymeric nanoparticles (BNPs) in drug delivery and life cycle assessment (LCA) of starch-based polymeric materials for packaging and allied applications.With contributions from leading experts in academia and industry, this volume demonstrates the versatility of starch and its potential in a variety of applications."

"This book about salen metal complexes as catalysts for the synthesis of polycarbonates from cyclic ethers and carbon dioxide, material properties of poly(propylene carbonates), poly(3-hydroxybutyrate) from carbon monoxide, ecoflex® and ecovio® : biodegradable, performance-enabling plastics, biodegradability of poly(vinyl acetate) and related polymers, recent developments in ring-opening polymerization of lactones, recent developments in metal-catalyzed ring-opening polymerization of lactides and glycolides : preparation of polylactides, polyglycolide, and poly(lactide-co-glycolide), bionolle (polybutylenesuccinate), and polyurethanes from renewable resources."

""This book will cover the development and utilization of polymer films and coatings derived from non-petroleum, renewable resources from an applications perspective rather than being designed in the form of chapters in which individual polymers or polymer types are described. It will also include the topic of sustainability and how it is defined as well as a chapter on new developments in film production or coating technology in relation to existing technology (e.g., nanocomposites, plasma or corona treatment technology and lamination)"--"

"Plastik konvensional yang saat ini beredar di Indonesia merupakan plastik yang sulit terurai di alam sehingga dapat menyebabkan permasalahan lingkungan. Oleh karena itu dibutuhkan solusi dengan mengganti plastik konvensional menjadi plastik biodegradable, yang salah satunya adalah plastik biodegradabel berbahan dasar campuran pati dengan polietilen. Pada skripsi ini membahas pendegradasian yang terjadi pada plastik biodegradabel berbahan dasar pati yang di uji dengan menggunakan tiga metode, yaitu metode ASTM G21-09, uji mikroorganisme dan uji lapangan. Hasil pengujian menggunakan 5 jenis kapang uji berdasarkan metode ASTM G21-09 menunjukkan bahwa pertumbuhan kapang dapat melingkupi 85% permukaan benda uji setelah 2 minggu. Kemudian pengujian mikroorganisme alami menghasilkan berat akhir benda uji setelah 8 minggu pengujian sebesar 71% dengan mikroorganisme air danau, 68% dengan mikroorganisme air sungai dan 56% menggunakan mikroorganisme tanah. Pada pengujian ini tidak menghasilkan perubahan bentuk benda uji. Sedangkan pengujian lapangan menghasilkan berat akhir benda uji setelah 8 minggu pengujian sebesar 0% pada perendaman air sungai dan air danau dan 58% pada penguburan di dalam tanah. Pada pengujian ini terjadi perubahan bentuk benda uji.

---

Conventional plastics, which are widely used in Indonesia, do not easily decompose in nature and as a result may cause environmental concerns. Therefore a solution is needed to change from conventional plastics to a more biodegradable form of the similar material, one of which is plastic made from a mixture of starch with polyethylene. This thesis discusses the degradation that occurs in starch-based biodegradable plastics as tested using three different methods: the ASTM G21-09 method, microorganism testing, and field testing.

Test results using five types of test mold that are based on the ASTM G21-09 and indicate that the mold growth may cover 85% of the surface of the specimen after two weeks. Afterwards, natural microorganism testing produced a final weight for the specimen after eight weeks of testing. The results were 71% with lake microorganisms, 68% with river microorganisms and 56% using microorganisms from soil. These tests did not produce a change in the shape or form of the specimen. While field testing produced the final weight of the specimen after 8 weeks at 0% after submersion in river and lake water, specimen buried in soil was at 58%. The specimen changed form during this experiment."

"Polylactic acid merupakan material biopolimer yang memiliki keunggulan karena kekuatannya yang tinggi namun memiliki kekurangan yakni laju kristalisasinya yang rendah sehingga membutuhkan waktu yang lama dalam proses. Penambahan plasticizer diketahui memiliki pengaruh dalam meningkatkan derajat kristalinitas polimer dan sifat termalnya. Penelitian ini bertujuan untuk mempelajari pengaruh penambahan diethylene glycol dibenzoate terhadap sifat termal dan derajat kristalinitas polylactic acid. Plasticizer triacetine digunakan sebagai pembanding. Proses pencampuran polylactic acid dilakukan dengan pelarut organik Dichlorometane dengan menggunakan magnetic stirrer selama 2 jam, kemudian ditambahkan plasticizer dengan persentase 0wt%, 5wt%, 10wt% dan 20wt% dengan proses mixing selama 5 menit. Seluruh sampel dilakukan proses hotpress dengan suhu 180°C dan beban 8 ton selama 5 menit. Interaksi antara molekul polylactic acid dengan plasticizer diamati dengan uji FTIR, sifat termal dan kristalinitas polylactic acid diamati dengan uji DSC dan kristalinitas dikonfirmasi dengan XRD. Perlakuan annealing diberikan untuk melihat laju kristalisasi polylactic acid setelah penambahan plasticizer. Hasilnya, dengan penambahan diethylene glycol dibenzoate 5-20wt% memberikan perubahan sifat termal polylactic acid dengan nilai Tg dari 46,5°C menjadi 39,4-21,1°C, Tcc dari 112,8°C menjadi 107,5-84,6°C, Tm dari 170,6°C menjadi 167-160°C, dan derajat kristalinitasnya dari 5,05% menjadi 7,47-17,20%. Penambahan triacetine 5-20wt% memberikan perubahan sifat termal dengan nilai Tg dari 46,5°C menjadi 42,1-32,4°C, Tcc dari 112,8°C menjadi 100,7-88,4°C, Tm dari 170,6°C menjadi 168,3-163,1°C dan derajat kristalinitasnya 5,05% menjadi 8,38-15,05%.

---

Polylactic acid is a biopolymer which have an exellence strength but low rate of crystallization so it will take long cycle time in mass production. The addition of plasticizer known to have an influence in increasing the degree of crystallinity of the polymer and its thermal properties. This research aims to study the effect of the addition of diethylene glycol dibenzoate on the thermal properties and the degree of crystallinity of polylactic acid. Triacetine used as plasticizer for comparation. Polylactic acid mixed by organic solvent, Dichloromethane, by magnetic stirrer for 2 hours and then added by 0wt%, 5wt%, 10wt% and 20wt% plasticizer for 5 minutes. All of samples was hot pressed at 180°C by 8 ton load for 5 minutes. Molecular interaction between polilactic acid and the plasticizers observed by FTIR testing, thermal properties and crystallinity of polylactic acid observed with DSC testing and confirmation by XRD. Annealing treatment given to see the rate of crystallization of polylactic acid after the addition of plasticizer. The result, diethylene glycol dibenzoate change polylactic acid thermal properties with Tg values from 46,5°C to 39,4-21,1°C, Tcc from 112,8°C to 107,5-84,6°C, Tm from 170,6°C to 167-160°C, and the degree of crystallinity from 5,05% to 7,47-17,20%. Triacetine 5-20wt% change polylactic acid thermal properties with Tg values from 46,5°C to 42,1-32,4°C, Tcc from 112,8°C to 100,7-88,4°C, Tm from 170,6°C to 168,3-163,1°C and the degree of crystallinity from 5,05% to 8,38-15,05%."

"Bioplastics, easily degraded plastics made from renewable biopolymers such as starch and protein, are being studied as possible substitute for synthetic plastics. One of Indonesian natural resources, Jicama (Pachyrizous erosus), also known as yam bean, is believed to have the potential to be made as bioplastics. This study aims to develop starch-based biofilms made from Jicama. The films were fabricated by using the solution casting method, with varying contents of water (67–93 wt%) and sodium hydroxide (0.3–0.7 g). Examinations were carried out by means of visual inspection, tensile test, scanning electron microscopy and FTIR spectroscopy. A continuous bioplastic film was successfully made with 93 wt.% water. The addition of water increased film formability. Sodium hydroxide improved the film formability but, also, induced fragility. The highest tensile strength and stiffness of 11.5 MPa and 0.98 GPa, respectively were achieved from the film prepared with 93 wt% water. These values are comparable to LDPE but with a lower ductility."

"Bahan biopoliester seperti poli(asam glikolat) umum digunakan sebagai bahan biopolimer untuk benang jahit. Masalah utama pada penggunaan bahan tersebut adalah hasil degradasi yang bersifat asam sehingga menimbulkan peradangan pada jaringan tubuh sekitar. Maka dikembangkan benang jahit berbahan dasar biopolimer berbasis pati termoplastik (thermoplastic starch atau TPS), dengan hasil degradasi berupa glukosa yang tidak menimbulkan peradangan atau reaksi dengan jaringan tubuh. Masalah baru muncul dalam pemanfaatan zat pati, yaitu sifat mekanis zat pati yang lemah. Selulosa mikrokristal (microcrystalline cellulose atau MCC) digunakan dalam penelitian sebagai zat penguat (reinforcement) untuk meningkatkan sifat mekanis TPS. Dalam penelitian ini, digunakan pati dari sagu (Metroxylon sagu) dengan variasi jenis plasticizer gliserol dan sorbitol serta variasi kadar MCC 0%, 2%, 5%, dan 10%. Karakteristik degradasi juga diuji dalam penelitian dengan merendam sampel dalam larutan PBS (pH 7.4 dan suhu 37℃) selama 6 pekan. Didapat bahwa untuk sampel dengan plasticizer gliserol, degradasi semakin lambat dengan penambahan MCC. Tren sebaliknya didapat pada sampel dengan plasticizer sorbitol. Sampel dengan plasticizer sorbitol dan kadar MCC 2% merupakan sampel optimum secara sifat mekanis dengan nilai tensile strength sebesar 4.68 MPa dan sisa massa 14.35% setelah 6 pekan degradasi, sehingga layak dijadikan sebagai potensi bahan benang jahit.

---

Common bio-based surgical sutures are made from biopolyesters like poly(glycolic acid). The main problem in such materials is the acidic degradation products which can cause inflammation in surrounding body tissues. To tackle this problem, thermoplastic starch (TPS) based surgical sutures are researched, which degrade into glucose and does not cause unwanted reactions with surrounding body tissues. However, TPS on its own has relatively poor mechanical properties. Microcrystalline cellulose (MCC) is used in this research as a reinforcement to improve the mechanical properties of TPS. In this research, sago (Metroxylon sagu) starch is used with two types of plasticizer (glycerol and sorbitol) and MCC contents of 0%, 2%, 5%, and 10%. Degradation characteristics are also tested by immersing the samples in PBS solution (pH 7.4 and 37℃) for 6 weeks. The sample set with glycerol has shown a slower trend in degradation with the addition of MCC, and the opposite trend has been observed within the sample set with sorbitol. The optimum sample is plasticized with sorbitol and has 2% MCC content, with a tensile strength of 4.68 MPa and remaining mass of 14.35% after 6 weeks of degradation, thus being feasible for potential surgical suture material"

"ABSTRAKPolusi plastik menjadi masalah lingkungan yang semakin serius dan banyak dorongan dari berbagai pihak untuk memberhentikan pemakaian plastik sekali pakai dan plastik non-biodegradable. Polyhydroxyalkanoate (PHA) adalah termoplastik biodegradable dan bioderived yang menunjukkan potensi besar sebagai pengganti untuk plastik yang selama ini digunakan dalam berbagai aplikasi. Pasar PHA saat ini memiliki pasokan yang terbatas, padahal ini adalah waktu yang tepat untuk memanfaatkan pasar plastik biodegradable dan bioderived yang berkembang ini. Fasilitas manufaktur untuk memproduksi 5000 ton per tahun PHA bioplastik dari jus tebu harus didesain. Berbagai proses pembuatan dievaluasi untuk menentukan proses yang paling cocok untuk aplikasi ini. Kultur murni Ralstonia eutropha adalah bakteri yang direkomendasikan untuk menghasilkan polimer PHA karena menghasilkan produk akhir yang banyak, stabil secara genetik, cocok untuk bahan baku sari tebu dan mampu menghasilkan PHB dan PHV, yang merupakan persyaratan ketat dalam laporan singkat proyek. Keseluruhan pabrik dibagi kedalam lima bagian terpisah: pra-pengolahan bahan baku, fermentasi, ekstraksi PHA, pemurnian dan peletisasi PHA, serta pemulihan aseton-air. Dalam tugas akhir ini, desain peralatan proses pemurnian dan peletisasi diselidiki lebih lanjut. Bagian pemurnian dan peletisasi bertujuan untuk mengendapkan PHA, mengeringkan dan membentuk produk padatan akhir sehingga menjadi produk PHA yang berbentuk pelet dengan diameter 3 mm. Dampak lingkungan telah diminimalisir semaksimal mungkin terutama dalam mencegah pelepasan aseton. Emisi debu, kebisingan, bau, dan gas buang adalah beberapa dari dampak lingkungan potensial yang diidentifikasi dan perlu dikelola secara efektif untuk mencegah kerusakan lingkungan.

---

ABSTRACT

Plastic pollution is becoming an increasingly serious environmental issue and there is a growing push to phase out single use and non-biodegradable plastics. Polyhydroxyalkanoate (PHA) is a biodegradable and bioderived thermoplastic that shows great potential as a cost-effective replacement to the existing plastics in a variety of applications. The market is currently supply constrained and it is an opportune time to capitalize on this expanding market. A manufacturing facility to produce 5000 tonnes per annum of PHA bioplastic from sugarcane juice is to be designed. A range of manufacturing processes were evaluated to determine the most suitable process for this application. A pure culture of Ralstonia eutropha was the recommended bacteria to produce the PHA polymers as it is high yielding, genetically stable, suited to cane juice feedstock and capable of producing both PHB and PHV, which is a strict requirement in the project brief. The overall plant was split and designed in five separate sections: feedstock pre-treatment, fermentation, PHA extraction, PHA purification and palletization, as well as acetone-water recovery. In this paper, the purification and palletisation process equipment designs are further investigated. The purification and pelletising section is responsible for precipitating the PHA, drying and forming the final solid product. Environmental impacts have been minimised as much as possible with a particular focus on preventing acetone from being discharged. Dust, noise, odor, and flue gas emissions are among some of the potential environmental impacts identified that will need to be managed effectively in order to prevent environmental harm."

""ABSTRAK

"

Bromelain memiliki waktu paruh yang singkat sehingga enzim ini akan cepat dieliminasi oleh tubuh. Enkapsulasi bromelain menggunakan polimer biodegradable sebagai pengantar obat terkontrol dapat meminimalkan masalah tersebut. Pada penelitian ini, enkapsulasi bromelain menggunakan hidrogel full interpenetrating polymer network full-IPN berbasis pada kitosan dan n-vinilkaprolaktam telah dilakukan metode post-loading. Komposisi hidrogel full-IPN terdiri dari kitosan : n-vinilkaprolaktam 90:10 b/b , asetaldehid 0,1 M 2 b/b dan MBA 0,5 M b/b terhadap kitosan sebagai agen pengikat silang. Karakterisasi hidrogel full-IPN menggunakan spektrofotometer UV-Vis, spektrofotometer FTIR, dan mikroskop stereo. Efisiensi loading bromelain dengan metode post-loading mencapai 98 diukur dengan spektrofotometer UV-Vis. Profil pelepasan bromelain memiliki pelepasan rata-rata pada pH 1,2 selama 2 jam 81 post-loading dan pelepasan rata-rata dengan pH 7,4 selama 8 jam 97 post-loading . Aktivitas proteolitik, kadar protein, dan aktivitas spesifik pada bromelain diperoleh dengan nilai terbaik masing-masing sebesar 0,116 Unit, 0,145 mg, dan 0,8 Unit/mg.

"hr>"

"b>ABSTRACT

"

Bromelain has a short half life so that this enzyme will quickly be eliminated by the body. Encapsulation of bromelain using biodegradable polymers as controlled drug delivery can minimize the problem. In this study, bromelain encapsulation using full interpenetrating polymer network full IPN hydrogel based on chitosan and n vinylcaprolactam has been done post loading method. The full IPN hydrogel composition comprises chitosan n vinylcaprolactam 90 10 w w , acetaldehyde 0.1 M 2 w w and MBA 0.5 M w w to chitosan as a crosslinking agent. Full IPN hydrogel characterization using UV Vis spectrophotometer, FTIR spectrophotometer, and stereo microscope. The efficiency of bromelain loading by post loading method was 98 measured by UV Vis spectrophotometer. The bromelain release profile has the average release at pH 1.2 for 2 hours 81 post loading and average release with pH 7.4 for 8 hours 97 post loading . Proteolytic activity, protein levels, and specific activity on bromelain were obtained with the best values of 0,116 Units 0,145 mg and 0,8 Units mg, respectively."