Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 156061 dokumen yang sesuai dengan query
cover
Ratiko
"Penelitian ini membahas optimasi sistem ventilasi dan tata udara untuk Instalasi Penyimpanan Sementara Bahan Bakar Nuklir Bekas dari Reaktor Riset G.A. Siwabessy. Keterbaruan dari penelitian ini adalah didapatkannya beberapa persamaan yang diperlukan. Optimasi yang dilakukan pada penelitian ini selain untuk Instalasi Penyimpanan Sementara Bahan Bakar Nuklir Bekas yang sudah ada juga untuk Instalasi Penyimpanan Sementara Bahan Bakar Nuklir Bekas tipe kering yang saat ini belum dibangun. Hasil dari penelitian ini menunjukkan bahwa beberapa persamaan yang dikembangkan pada penelitian ini bisa dibuktikan mendekati hasil eksperimen.

This study discusses an optimization of ventilation and air conditioning systems for the Interim Storage of Spent Nuclear Fuel Fuel from the G.A Siwabessy Research Reactor. The novelty of this research is to gain several equations needed for the optimization. The optimization in this study is in addition to the existing wet interim storage also for a dry storage that is currently still not built. The results of this study indicate that the equations developed in this study are consistent with the experimental results."
Depok: Universitas Indonesia, 2017
D2384
UI - Disertasi Membership  Universitas Indonesia Library
cover
Ratiko
"This study proposes a method of optimizing the dry storage design for nuclear-spent fuel from the G.A. Siwabessy research reactor at National Nuclear Energy Agency of Indonesia (BATAN). After several years in a spent fuel pool storage (wet storage), nuclear spent fuel is often moved to dry storage. Some advantages of dry storage compared with wet storage are that there is no generation of liquid waste, no need for a complex and expensive purification system, less corrosion concerns and that dry storage is easier to transport if in the future the storage needs to be sent to the another repository or to the final disposal. In both wet and dry storage, the decay heat of spent fuel must be cooled to a safe temperature to prevent cracking of the spent fuel cladding from where hazardous radioactive nuclides could be released and harm humans and the environment. Three optimization scenarios including the thermal safety single-objective, the economic single-objective and the multi-objective optimizations are obtained. The optimum values of temperature and cost for three optimization scenarios are 317.8K (44.7°C) and 11638.1 US$ for the optimized single-objective thermal safety method, 337.1K (64.0°C) and 6345.2 US$ for the optimized single-objective cost method and 325.1K (52.0°C) and 8037.4 US$ for the optimized multi-objective method, respectively."
Depok: Faculty of Engineering, Universitas Indonesia, 2018
UI-IJTECH 9:1 (2018)
Artikel Jurnal  Universitas Indonesia Library
cover
Arifin Istavara
"Penelitian ini bertujuan untuk memberikan solusi penyimpanan Bahan Bakar Nuklir Bekas (SNF) di Indonesia. Karena keterbatasan ruang pada penyimpanan tipe basah, maka penelitian ini merancang, mensimulasikan, melakukan eksperimen, dan menghitung biaya pembuatan penyimpanan dry cask storage secara simultan. Dalam studi ini, desain dry cask storage dioptimalkan dengan menggunakan dua objective functions secara bersamaan yaitu fungsi keselamatan (yang menggabungkan parameter kekritisan, proteksi radiasi dan penghilangan panas) dan fungsi biaya. Perhitungan optimasi kemudian divalidasi dan dianalisis dengan data eksperimen dari prototipe dry cask storage. Dengan menentukan decision variables dan constraints, kemudian memasukkannya ke dalam Matlab software, diperoleh tiga pilihan hasil optimasi, safety optimized, cost optimized dan multi-objective optimized. Dalam multi-objective optimized, desain penyimpanan kering yang optimal diperoleh untuk radius luar beton dan timbal (Pb) masing-masing sebesar 0,06 m dan 0,51 m. tinggi ventilasi dan lebar masing-masing sebesar 0,15 m dan 0,5 m, dan perbedaan ketinggian ventilasi sebesar 2,43 m. Untuk kelima variabel diatas, nilai optimum temperatur permukaan kanister adalah 66,8 °C dan biaya yang dibutuhkan untuk pembuatan dry cask storage adalah $147,827. Ketebalan material yang dibutuhkan didapatkan nilai yang paling optimum untuk Pb 0,06 m dan beton 0,51 m, dari validasi menggunakan MicroShield software didapatkan paparan permukaan penyimpanan dry cask sebesar 104,8 mR/jam sehingga masih dalam batas aman dari nilai maksimum yang ditentukan yaitu 160 mR/jam. Demikian pula dari simulasi suhu permukaan tabung menggunakan Ansys Fluent software untuk kelima variabel di atas, nilai suhu permukaan mendekati perhitungan yang persamaannya dimasukkan ke dalam Matlab software. Validasi menggunakan data eksperimen dari prototipe dry cask storage dan juga perhitungan manual diperoleh nilai temperatur yang juga relatif mendekati hasil optimasi, yaitu 45,2 °C untuk temperatur dari eksperimen dan 50.2 °C untuk temperatur perhitungan teori. Hasil nilai optimasi terpilih dengan tetap menjaga keamanan termal menunjukkan bahwa acuan dalam pembuatan desain dengan skala 1:1 dapat menggunakan estimasi untuk keamanan termal T1, untuk jenis SNF Materials Testing Reactor (MTR) dengan umur setelah sepuluh tahun disimpan pada jenis penyimpanan tipe basah.

This research aims to provide a solution for Indonesia's spent nuclear fuel (SNF) storage. Due to the limited storage space in wet type storage, this research designs, simulates, conducts experiments, and calculates the cost of making dry cask storage simultaneously. In this study, the dry storage design was optimized by using two objective functions simultaneously: safety function (which combines criticality parameters, radiation protection and heat removal) and cost function. The optimization calculations were then validated and analyzed with experimental data from the dry cask storage prototype. By determining the decision variables and constraints and then inputting them into the Matlab software, three choices of optimization results are obtained, safety optimized, cost optimized and multi-objective optimized. In multi-objective optimized, the optimum dry storage design is obtained for the concrete outer- and lead (Pb) outer-radius of 0.06 m and 0.51 m respectively. vent-height, -widt by 0.15 m and 0.5 m respectively, and a vent elevation difference of 2.43 m. For the five variables above, the optimum value for the canister surface temperature is 66.8 °C and the cost required to make dry storage is $ 147,827.The required thickness of the material obtained the most optimum value for Pb 0.06 m and concrete 0.51 m, from validation using MicroShield software, it was obtained that the dry cask storage surface exposure was 104.8 mR/h so that it is still within the safe limit of the maximum value specified, which is 160 mR/h. Similarly, from the simulation of canister surface temperature using Ansys Fluent for the five variables above, the surface temperature value is close to the calculation whose equations are inputted into matlab. Validation using experimental data from the dry storage prototype and also manual calculations obtained temperature values which are also relatively close to the optimization results, 45.2 °C for temperature from experiments and 50.2 °C for temperature from manual calculations. The result of the selected optimization value while maintaining thermal safety indicates that reference in making designs with a scale of 1:1 can use the estimate for the thermal safety of T1, for the type of SNF Materials Testing Reactor with age after ten years stored in the wet storage type."
Depok: Fakultas Teknik Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Aulia Arivin Billah
"Radionuklida [177Lu]Lu bebas pengemban adalah sediaan radionuklida [177Lu]Lu dengan aktifitas spesifik yang sangat tinggi namun dibutuhkan pemisahan yang sangat sulit untuk memperolehnya. Pada penelitian ini dikembangkan metode produksi [177Lu]Lu bebas pengemban dari aktivasi tidak langsung isotop Ytterbium alam menggunakan metode pemisahan kromatografi penukar ion dengan fasa diam resin Dowex W50 X8 dan campuran eluen alpha Hydroxyisobutiric Acid (α-HIBA) dan HCl. Hasil penelitian menunjukan bahwa reaktor nuklir G.A Siwabessy telah mampu menghasilkan [177Lu]Lu sebanyak 296 MBq/10 mg sampel Yb2O3. Dua metode pemisahan spesifik diperoleh, pertama dengan menahan radionuklida [177Lu]Lu di dalam resin sedangkan ion dan radionuklida pengotor keluar dari kolom menggunakan campuran eluen HCl 0,25 M dan ɑ-HIBA 0,1 M yang dapat mengeluarkan pengotor [175Yb]Yb  sekitar 1,6 x 10-3 % yield/ml dan [169Yb]Yb sekitar 4,2 % yield/ml. Metode kedua didapatkan dengan menggunakan peningkatan konsentrasi eluen α-HIBA 0,15 M yang menyebabkan [177Lu]Lu keluar dari kolom sedangkan pengotor tetap berada di dalam kolom dengan kemurnian [177Lu]Lu sekitar 81,9 % dan aktifitas spesifik (1,163 GBq/mg). Faktor peningkatan konsentrasi HCl diatas 0,25 M pada eluen menyebabkan penurunan selektifitas pemisahan [177Lu]Lu dari matriks ytterbium. Sedangkan faktor peningkatan temperatur elusi 50 oC dapat menaikan selektifitas pemisahan dengan menahan lebih baik [177Lu]Lu di dalam resin.

No-carrier added [177Lu]Lu radionuclide is a [177Lu]Lu radionuclide preparation with very high specific activity but requires very difficult separation to obtain it. In this research, a carrier-free [177Lu]Lu production method was developed from indirect activation of natural Ytterbium isotopes using an ion exchange chromatography separation method with a Dowex W50 X8 resin and mixed eluent alpha hydroxyisobutyric acid (α-HIBA) and hydrochloric acid (HCl). The research results showed that the G.A Siwabessy nuclear reactor was able to produce [177Lu]Lu as much as 296 MBq/10 mg Yb2O3 sample. Two specific separation methods were obtained, first by retaining the [177Lu]Lu radionuclide in the resin while the impurity ions and radionuclides come out of the column using a mixture of 0.25 M HCl and 0.1 M ɑ-HIBA eluents which can remove [175Yb]Yb impurities around 1.6 x 10-3 % yield/ml and [169Yb]Yb around 4.2 % yield/ml. The second method was obtained by using an increase in the eluent concentration of 0.15 M α-HIBA which caused [177Lu]Lu to come out of the column while the impurities remained in the column with a [177Lu]Lu purity of around 81.9% and specific activity (1.163 GBq/mg ). The increasing factor of HCl concentration above 0.25 M in the eluent causes a decrease in the selectivity of [177Lu]Lu separation from the ytterbium matrix. Meanwhile, increasing the elution temperature by 50 oC can increase separation selectivity by better retaining [177Lu]Lu in the resin."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Pungky Ayu Artiani
"[ABSTRAK
Limbah Bahan Bakar Nuklir Bekas (BBNB) merupakan salah satu limbah yang dihasilkan dalam pengoperasian reaktor nuklir. Limbah ini masih menghasilkan produk fisi dan panas hasil reaksi yang masih tinggi sehingga perlu dikelola dengan baik agar efek radiasi yang ditimbulkan tidak keluar di lingkungan. Penelitian ini akan dilakukan pemodelan panas peluruhan pada penyimpanan kering BBNB bentuk pebble dengan tipe storage tank yang telah digunakan pada reaktor HTR 10 menggunakan software ORIGEN-ARP. Dengan computational fluid dynamics (CFD) menggunakan Comsol Multiphysics maka pengaruh kecepatan udara pendingin dan ketebalan lapisan pengungkung terhadap profil suhu di setiap segmen storage dapat diketahui sehingga keselamatan penyimpanan BBNB pada aspek suhu dapat dianalisis. Dari hasil perhitungan dapat diketahui bahwa panas peluruhan yang dihasilkan oleh BBNB setelah keluar dari reaktor sebesar 620,2260 watt. Panas peluruhan tersebut semakin menurun seiring dengan lamanya waktu penyimpanan. Ketebalan beton tidak terlalu berpengaruh terhadap penurunan suhu di storage tank. Hal ini disebabkan oleh konduktivitas panas beton yang rendah sehingga laju perpindahan panas di setiap variasi ketebalan tidak berbeda secara signifikan. Ketebalan stainless steel berpengaruh terhadap gradien perubahan suhu pada storage tank. Semakin tipis stainless steel maka semakin banyak laju panas yang dialirkan dari grafit ke beton, sehingga suhu pada beton semakin besar. Semua hasil simulasi pada berbagai kondisi memenuhi syarat parameter suhu maksimum keselamatan.

ABSTRACT
Nuclear Fuel Waste is one of waste generated in operation of nuclear reactors. This waste is still producing fission products and heat of reaction that need to be managed properly so the effects of radiation emitted do not expose to environment. This research will be carried out modeling the decay heat in dry storage of pebble nuclear spent fuel with the type of storage tanks that have been used in the reactor HTR 10 using ORIGEN-ARP software. The effects of cooling air velocity and confinement layer thickness on temperature profile in every segment of storage can be determined with computational fluid dynamics (CFD) using Comsol Multiphysics so the safety of nuclear spent fuel storage on temperature aspects can be analyzed. Based on the calculation results can be seen that the decay heat generated by nuclear spent fuel after coming out from the reactor is 620.2260 watts. The decay heat decreases as the length of storage time. Concrete thickness does not significantly affect the declining temperature gradient in the storage tank. This is caused by the low thermal conductivity of concrete so the heat transfer rate in each variation of thickness is not different significantly. Stainless steel thickness affects the declining temperature gradient. Thinner the thickness of the stainless steel is used, greater the reduction of temperature gradient so equilibrium temperature of storage tank can be quickly achieved. All simulation results under various conditions compliy with the maximum temperature parameters of safety.;Nuclear Fuel Waste is one of waste generated in operation of nuclear reactors. This waste is still producing fission products and heat of reaction that need to be managed properly so the effects of radiation emitted do not expose to environment. This research will be carried out modeling the decay heat in dry storage of pebble nuclear spent fuel with the type of storage tanks that have been used in the reactor HTR 10 using ORIGEN-ARP software. The effects of cooling air velocity and confinement layer thickness on temperature profile in every segment of storage can be determined with computational fluid dynamics (CFD) using Comsol Multiphysics so the safety of nuclear spent fuel storage on temperature aspects can be analyzed. Based on the calculation results can be seen that the decay heat generated by nuclear spent fuel after coming out from the reactor is 620.2260 watts. The decay heat decreases as the length of storage time. Concrete thickness does not significantly affect the declining temperature gradient in the storage tank. This is caused by the low thermal conductivity of concrete so the heat transfer rate in each variation of thickness is not different significantly. Stainless steel thickness affects the declining temperature gradient. Thinner the thickness of the stainless steel is used, greater the reduction of temperature gradient so equilibrium temperature of storage tank can be quickly achieved. All simulation results under various conditions compliy with the maximum temperature parameters of safety., Nuclear Fuel Waste is one of waste generated in operation of nuclear reactors. This waste is still producing fission products and heat of reaction that need to be managed properly so the effects of radiation emitted do not expose to environment. This research will be carried out modeling the decay heat in dry storage of pebble nuclear spent fuel with the type of storage tanks that have been used in the reactor HTR 10 using ORIGEN-ARP software. The effects of cooling air velocity and confinement layer thickness on temperature profile in every segment of storage can be determined with computational fluid dynamics (CFD) using Comsol Multiphysics so the safety of nuclear spent fuel storage on temperature aspects can be analyzed. Based on the calculation results can be seen that the decay heat generated by nuclear spent fuel after coming out from the reactor is 620.2260 watts. The decay heat decreases as the length of storage time. Concrete thickness does not significantly affect the declining temperature gradient in the storage tank. This is caused by the low thermal conductivity of concrete so the heat transfer rate in each variation of thickness is not different significantly. Stainless steel thickness affects the declining temperature gradient. Thinner the thickness of the stainless steel is used, greater the reduction of temperature gradient so equilibrium temperature of storage tank can be quickly achieved. All simulation results under various conditions compliy with the maximum temperature parameters of safety.]"
2016
T45267
UI - Tesis Membership  Universitas Indonesia Library
cover
M. Hadi Kusuma
"Untuk meningkatkan keselamatan termal pada saat terjadi kecelakaan akibat station blackout, vertical straight wickless-heat pipe pipa kalor lurus tanpa sumbu kapiler yang diletakkan secara vertikal diusulkan sebagai sistem pendingin pasif baru untuk pembuangan panas sisa hasil peluruhan di kolam penyimpanan bahan bakar bekas nuklir. Pipa kalor akan membuang panas peluruhan dari kolam penyimpanan bahan bakar bekas nuklir dan dapat menjaga sistem tetap aman. Tujuan penelitian ini adalah untuk menginvestigasi karakteristik, fenomena perpindahan kalor, dan unjuk kerja termal pipa kalor yang digunakan mencari pengaruh kecepatan pendinginan dengan besarnya kalor yang harus dibuang, menganalisis keserupaan dimensi dari pipa kalor yang digunakan, dan mengetahui teknologi pipa kalor yang dapat digunakan sebagai sistem keselamatan pasif di instalasi nuklir pada kondisi kecelakaan akibat station blackout. Investigasi secara eksperimen dilakukan dengan mempertimbangkan pengaruh tekanan awal pipa kalor, evaporator filling ratio, beban kalor evaporator, dan laju aliran pendingin di water jacket. Air pendingin disirkulasikan dalam water jacket sebagai penyerap kalor di bagian condenser. Simulasi dengan program perhitungan termohidraulika RELAP5/MOD3.2 dilakukan untuk mendukung dan membandingkan dengan hasil eksperimen yang didapatkan. Hasil eksperimen menunjukkan bahwa unjuk kerja termal terbaik pipa kalor didapatkan pada tahanan termal 0,016 C/W. Unjuk kerja termal terbaik didapatkan pada saat pipa kalor diberikan filling ratio 80 , tekanan awal terendah, laju aliran pendingin tertinggi, dan beban kalor evaporator tertinggi. Dari nilai tahanan termal tersebut didapatkan bahwa pipa kalor ini memiliki kemampuan memindahkan kalor 199 kali lebih besar jika dibandingkan dengan batang pejal tembaga dengan geometri yang sama. Model pipa kalor dalam simulasi dengan RELAP5/MOD3.2 dapat digunakan untuk mendukung investigasi secara eksperimen dalam memprediksi fenomena yang berlangung di bagian dalam pipa kalor. Analisis dimensi dan keserupaan pipa kalor yang didapatkan bisa digunakan untuk merancang pipa kalor lain dengan geometri yang berbeda namun tetap menghasilkan unjuk kerja termal yang sama. Kesimpulan investigasi yang dilakukan menunjukkan bahwa pipa kalor ini memiliki unjuk kerja termal yang tinggi dan dapat digunakan sebagai sistem pendingin pasif di kolam penyimpanan bahan bakar bekas nuklir pada saat terjadinya kecelakaan akibat station blackout.

To enhance the thermal safety when station blackout accident occurs, a vertical straight wickless heat pipe is proposed as a new passive residual heat removal system in nuclear spent fuel storage pool. The heat pipe will remove the decay heat from nuclear spent fuel pool and keep the system safe. The objective of this research is to investigate the characteristics, heat transfer phenomena, and thermal performance of heat pipe, to analyse the effect of coolant flowrate against heat to be removed, analysing the dimensional similarity of heat pipe, and to know the heat pipe technology that could be used as passive safety system in nuclear installation during to station blackout accident. The experimental investigation was conducted to investigate the heat transfer phenomena and heat pipe thermal performance with considering the influence of heat pipe initial pressure, evaporator filling ratio, evaporator heat load, and coolant volumetric flow rate of water jacket. Cooling water was circulated in water jacket as condenser cooling system. A numerical simulation with nuclear reactor thermal hydraulic code RELAP5 MOD3.2 was performed to support and to compare with the experimental results. The experimental results showed that the best thermal performance was obtained at thermal resistance of 0.016 C W, with filling ratio of 80 , the lower initial pressure, higher coolant volumetric flow rate, and higher heat load of evaporator. From thermal resistance analysis, it is found that the heat pipe has the ability to remove heat 199 times greater than copper rod with the same geometry. The RELAP5 MOD3.2 simulation model can be used to support experimental investigation and to predict the phenomena inside the heat pipe. The dimensional analysis and similitude of the heat pipe can be applied to design the other heat pipe with different geometries with produces the same thermal performance. The conclusion of investigation showed that vertical straight wickless heat pipe has higher thermal performance and can be used as passive residual heat removal system of nuclear spent fuel pool when station blackout occurs."
Depok: Universitas Indonesia, 2017
D2297
UI - Disertasi Membership  Universitas Indonesia Library
cover
B.Y. Eko Budi Jumpeno
"Pembangunan Kawasan Reaktor Nuklir GA. Siwabessy di Serpong, Jawa Barat yang meliputi juga Reaktor Nuklir G.A. Siwabessy didasarkan pada pertimbangan bahwa teknologi nuklir memiliki suatu manfaat yang besar bagi pembangunan. Walaupun demikian paparan radiasi nuklir dan kontaminasi zat radioaktif dalam operasi normal maupun pada kasus kecelakaan, terutama terhadap kesehatan dan keselamatan manusia merupakan risiko penggunaan teknologi nuklir, sehingga pembangunan dan pengoperasian suatu instalasi nuklir -termasuk Reaktor Nuklir G.A. Siwabessy-, selalu berpedoman pada tiga asas yaitu justifikasi, optimisasi (ALARA) dan limitasi. Selain itu diperlukan suatu studi AMDAL yang juga meliputi rencana pengelolaan lingkungan (RKL) dan rencana pemantauan Iingkungan (RPL) dan sudah dilakukan di Kawasan Reaktor Nuklir G.A. Siwabessy. Paparan radiasi nuklir dan kontaminasi zat radioaktif dapat terjadi di kawasan Reaktor Nuklir G.A. Siwabessy sehingga diperlukan upaya pemantauan konsentrasi zat radioaktif di udara. Pemantauan secara periodik diperlukan untuk mendeteksi sedini mungkin terjadinya Iepasan zat radioaktif ke Iingkungan melalui cerobong atau lepasan zat radioaktif dalam udara ruangan kerja pada kondisi operasi normal sehingga bila terjadi peningkatan lepasan dapat segera dilakukan tindakan pengurangan atau penghentian operasi. Selain melaksanakan pemantauan secara teratur, Batan melalui SK Dirjen Batan No. PN 03/160/DJ/1989 telah menetapkan tingkat konsentrasi radioaktivitas dalam udara yang diperkenankan berdasarkan rekomendasi International Commission on Radiological Protection (ICRP Publication 26, 1977). Tingkat konsentrasi radioaktivitas di udara ini berkaitan dengan nilai limit on intake (ALI) pada jalur inhalasi dan kapasitas paru-paru pekerja radiasi dan anggota masyarakat. Dalam hal ini yang perlu diperhatikan ialah rekomendasi-rekomendasi yang telah diadopsi oleh Batan dari ICRP didasarkan pada perhitungan risiko yang menggunakan data fisiologi standar yang sebagian besar merupakan data manusia ras Kaukasus. Berdasarkan studi lanjut pada korban radiasi bom atom di Hiroshima dan Nagasaki, ICRP menerbitkan rekomendasi keselamatan radiasi yang baru dalam ICRP Publication 60 tahun 1990, di mana salah satu butir rekomendasinya ialah pengurangan nilai batas dosis dari 50 mSv/tahun menjadi 20 mSv/tahun. Seperti pada ICRP Publication 26 tahun 1977, penentuan batas-batas standar keselamatan juga didasarkan pada standar fisiologi ras Kaukasus dan ditambah standar fisiologi manusia Jepang. Namun demikian rekomendasi keselamatan yang terakhir masih menjadi bahan studi negara-negara pemilik fasilitas nuklir.
Salah satu aspek penting yang perlu dicermati dari rekomendasi batas dosis pada ICRP Publication 60 tahun 1990 yang boleh diterima oleh manusia adalah apakah desain sistem keselamatan yang diterapkan pada saat ini memenuhi kriteria tersebut. Apabila desain sistem keselamatan tidak memenuhi kriteria maka konsekuensi logisnya adalah perubahan desain keselamatan yang bemilai ekonomi sangat besar. Oleh karena itu perlu dilakukan kajian aspek-aspek yang terkait dengan keselamatan. Kegiatan studi paparan internal pada jalur inhalasi menempatkan kondisi Iingkungan faktual pads saat Reaktor Nuklir G.A. Siwabessy dalarn keadaan beroperasi yang meliputi :
1. Definisi kapasitas paru-paru para pekerja di kawasan
2. Rentang fluktuasi lepasan radionuklida di kawasan
3. Prediksi dosis interna yang disebabkan oleh paparan radionuklida yang terdeposisi di dalam tubuh melalui jalur inhalasi.
Penelitian dan kajian dalam Studi Paparan Interna pada Jalur lnhalasi di Kawasan Reaktor Nuklir G.A. Siwabessy bertujuan untuk mendapatkan data kapasitas paru-paru pekerja di kawasan, untuk mendapatkan data jenis dan kadar radionuklida di udara kawasan, dan untuk memprediksi dosis interna yang diterima para pekerja. Data tersebut sangat berguna untuk mengevaluasi desain keselamatan Reaktor Nuklir G.A. Siwabessy baik yang mengacu pads ICRP Publication 26 tahun 1977 maupun ICRP Publication 60 tahun 1990 serta mengevaluasi prosedur-prosedur keselamatan yang diterapkan.
Berdasarkan uraian di atas dapat disampaikan hipotesis penelitian ini sebagal berikut:
Pertama; kapasitas paru-paru seseorang ditentukan oleh faktor jenis kelamin, umur, berat dan tinggi badan, serta kondisi kesehatan seseorang. Ras dan kondisi kesehatan seseorang diduga sangat menentukan nilai kapasitas paru-paru.
Kedua; konsentrasi radioaktivitas di udara dipengaruhi oleh tinggi cerobong lepasan, dan faktor cuaca seperti kecepatan angin dan curah hujan. Tetapi faktor cuaca tersebut berlangsung sangat acak. Rentang maksimum diduga pada kondisi kecepatan angin rendah dan kondisi tidak hujan. Sedangkan rentang minimum diduga terjadi pada kondisi angin bertiup kencang dan kondisi sesudah hujan deras.
Ketiga; prediksi dosis interna melalui jalur inhalasi ditentukan oleh kapasitas paru-paru yang meliputi kapasitas fungsional residu, volume ruang mati dan volume tidal; konsentrasi radioaktivitas di udara; diameter partikel radionuklida; laju pernapasan dan dimensi saluran pernapasan yang meliputi diameter trakea dan diameter bronkiolus. Sumbangan masing-masing parameter tersebut terhadap nilai dosis interna berbeda-beda. Diduga pengaruh terbesar diberikan oleh diameter trakea, diameter bronkiolus dan diameter partikel radionuklida yang terdeposisi di dalam tubuh.
Studi paparan interna pada jalur inhalasi ini dilaksanakan di Kawasan Reaktor Nuklir G.A Siwabessy dalam radius sekitar 500 meter dari reaktor.
Pengambilan sampel udara Iingkungan dilakukan pada enam titik pengukuran dengan memperhatikan arah angin dominan yaitu pada arah tenggara sampai selatan, sedangkan para pekerja yang diukur kapasitas paru-parunya meliputi juga pengukuran laju pernapasan berasal dari Pusat Reaktor Serbaguna G.A. Siwabessy sebagai responden di dalam gedung reaktor dan dari Pusat Teknologi Pengolahan Limbah Radioaktif untuk responden di Iuar gedung reaktor.
Teknik analisis data yang digunakan ialah analisis statistik sederhana untuk menghitung kapasitas paru-paru para pekerja, analisis spektroskopi nuktir untuk mengidentifikasi radionuklida dan menentukan konsentrasi radioaktivitasnya, analisis grafik untuk menentukan nilai activity median aerodynamic diameter (AMAD) serta penggunaan perangkat iunak LUDEP (Lung Dose Evaluation Program) 2.0 untuk memprediksi dosis interna. Parameter-parameter yang menjadi input dalam perhitungan dosis interna menggunakan LUDEP 2.0 ialah kapasitas paru-paru, dimensi saluran pernapasan, laju pernapasan; konsentrasi radioaktivitas di udara serta diameter partikel radionuklida.
Pada penelitian ini diperoleh hasil nilai median kapasitas vital para pekerja di Kawasan Reaktor Nuklir G.A. Siwabessy sebesar 3,15 liter untuk pria dan 2,20 liter untuk wanita. Sedangkan nilai median volume tidal untuk pria ialah 1,04 liter dan untuk wanita sebesar 0,88 liter. Sementara di udara kawasan tersebut teridentifikasi radionuklida Thallium-208, Plumbum-212 dan Plumbum-214 yang berasal dari alam pada konsentrasi di bawah lima Bq/M3.
Sedangkan hasil perhitungan dosis interna oleh para pekerja menggunakan perangkat lunak LUDEP 2.0 diperoleh penerimaan dosis efektif tertinggi untuk seluruh tubuh sebesar 3,097mSv/tahun pada radius 150 arah selatan tenggara gedung reaktor.
Berdasarkan pengukuran, perhitungan dan kajian yang telah dilakukan dapat disampaikan beberapa kesimpulan sebagai berikut:
Kapasitas paru-paru para pekerja di Kawasan Reaktor Nuklir G.A. Siwabessy relatif lebih kecil dibandingkan dengan kapasitas paru-paru manusia ras Kaukasus yang dipakai sebagai standar ICRP. Hal ini dapat dilihat pada nilai perbandingan kapasitas vital para pekerja di kawasan tersebut terhadap kapasitas vital manusia ras Kaukasus yang dipakai sebagai standar ICRP yang nilainya lebih kecil dari satu.
Di udara ruang kerja Reaktor Nuklir G.A. Siwabessy dan di lingkungan luar reaktor pada radius 500 meter tidak ditemukan adanya radionuklida hasil fisi maupun hasil aktivasi, namun terdeteksi adanya radionuklida Thallium-208, Plumbum-212 dan Plumbum-214 yang berasal dari alam pada konsentrasi lebih kecil dari lima Bq/M3 udara. Dengan demikian pengoperasian Reaktor Nuklir G.A. Siwabessy tidak menimbulkan efek peningkatan radioaktivitas pada Iingkungan udara di kawasan tersebut.
Hasil prediksi perhitungan penerimaan dosis interna melalui jalur inhalasi selama satu tahun untuk konsentrasi radioaktivitas di udara dan ukuran AMAD yang sama, ternyata berbeda pads masing-masing pekerja. Hal ini menunjukkan bahwa nilai kapasitas paru-paru, nilai dimensi saluran pernapasan dan nilai laju pernapasan yang menjadi input perhitungan dosis mempengaruhi penerimaan dosis intema melalui jalur inhalasi, walaupun tingkat pengaruhnya berbeda-beda untuk masing-masing parameter. Berdasarkan perhitungan tersebut penerimaan dosis efektif interna tertinggi nilainya hanya dalam orde 10 mSv. Apabila dibandingkan dengan penerimaan dosis eksterna tertinggi selama satu tahun yang nilainya adaiah 6,28 mSv, sumbangan dosis interna melalui jalur inhalasi terhadap keseluruhan penerimaan dosis tidak signifikan. Nilai ini juga jauh lebih rendah dibandingkan dengan batas penerimaan dosis tertinggi tahunan menurut ICRP Publication 60 yaitu sebesar 20 mSv yang merupakan gabungan dosis intema dan dosis ekstema.
Dari hasil penelitian ini juga terdapat beberapa saran yang baik bagi pengelola Kawasan Reaktor Nuklir G.A. Siwabessy maupun bagi para peneliti lain yang akan melakukan kajian lebih lanjut mengenai radioaktivitas di udara kawasan tersebut sebagai berikut: Untuk memperoleh hasil yang lebih baik pada pengukuran konsentrasi radioaktivitas di udara diperlukan waktu sampling dan waktu pencacahan yang lebih lama. Studi yang dilakukan dalam penelitian ini dapat digunakan dalam kajian keselamatan radiasi suatu instalasi nuklir; khususnya berkaitan dengan paparan interna melalui jalur inhalasi.

The development of G.A. Siwabessy Nuclear Reactor Area at Serpong, West Java including G.A. Siwabessy Nuclear Reactor was based on thought that nuclear technology would benefit the nation. However, the effect of nuclear radiation exposure and radioactive contaminant in normal operation or accident cases, especially for human health and safety, are the risks introduced by the application of nuclear technology, so the development and operation of nuclear installations - including G.A. Siwabessy Nuclear Reactor - always take three principles namely justification, optimization (ALARA) and limitation. Beside, it is necessary to carry out study of analysis for environmental impact (AMDAL) including environmental management plan (RKL) and environmental monitoring plan (RPL) and this activity has already done at G.A. Siwabessy Nuclear Reactor.
Nuclear radiation exposure and radioactive contaminant of the G.A. Siwabessy Nuclear Reactor area are necessary to be monitored. Regular monitoring is needed to detect the releasing of radionuclide into the air or working room at normal condition as early as possible. If the radioactive release improved, the operation could be reduced or stopped. Based on Director General Decree Number PN 03/160/DJ/1989, Batan has made a regulation on the limit of radioactive concentration in the air based on ICRP recommendation (ICRP Publication 26, 1977). The limit of radioactive concentration in the air is related to the limit of intake (ALI) of inhalation pathway and lung capacity of workers or members of public. It is necessary to know that the recommendations adopted Batan from ICRP are based on risk calculations using standard physiological data which much of them are the Caucasian data. Based on advanced researches of atomic bomb victims in Hiroshima and Nagasaki, ICRP published the new radiation safety recommendations in the ICRP Publication 60 year 1990. One of the recommendations is reduction of dose limit from 50 mSv/year to 20 mSv/year. As the recommendations in the ICRP Publication 26 year 1977, the safety standard limits are based on the physiological standard of the Caucasian with additional consideration of physiological standard of the Japanese. However, the recommendations are still assessed by countries which have nuclear facilities.
One of important aspects of dose limit in the ICRP Publication 60 year 1990 is whether the safety system design fulfils the criteria. if the safety system doesn't fulfill the criteria so its consequence is expensive safety design change.
Third, internal dose prediction through inhalation pathway is determined by lung capacity including residual functional capacity, dead space and tidal volume; concentration of radioactivity in the air, diameter of radionuclide particle; rate of respiration and also dimension of respiratory tract including diameter of trachea and diameter of bronchioles . The contribution of each parameter to the internal dose is different. It is estimated that the most influence is contributed by diameter of trachea, diameter of bronchioles and diameter of radionuclide particle deposited in the body.
Study of internal dose at inhalation pathway was carried out in radius 500 meters from reactor. Air sampling was taken at six points by south east to south west wind direction. Meanwhile, the measurement of lung capacity of workers including the rate of respiration was carried out at G.A. Siwabessy Multi Purpose Reactor Centre and Radioactive Waste Management Centre.
Simple statistic is applied to analyze lung capacity of workers; Nuclear spectroscopy method is used for identifying radionuclide and determining its concentration. Curved analysis is used for determining activity median aerodynamic diameter (AMAD). The effective internal dose was calculated by using software LUDEP (Lung Dose Evaluation Program) 2.0. with input of inhalation parameter including lung capacity, dimension of respiratory tract and rate of respiration. The concentration of radioactivity in the air and diameter of radionuclide particle are the other input parameters.
The study reported that vital capacity median of workers is 3.15 liters for male and 2.20 liters for female. Meanwhile, tidal volume for male is 1.04 liters and it is 0.88 liters for female. Thallium-208, Plumbum-212 and Plumbum-214 from natural radioactivity at concentration under five Bq/M³ are identified in the air of G.A. Siwabessy Nuclear Reactor Area. Meanwhile, maximum body effective dose calculated using LUDEP2.0 is 3.097E-1 mSv/year at 150 meters from reactor in south-south east direction.
The conclusions of this research are as follows:
Lung capacity of workers at G.A. Siwabessy Nuclear Reactor Area is lower than the Caucasian lung capacity. It could be seen from comparative vital capacity value which is lower than one.
There are no fissile and activated products indoor and outdoor at radius 500 meters. However, it is detected the existence of Thallium-208, Plumbum-212 and Plumbum-214 from natural radioactivity by concentration lower than five Bq/M³. So that, the operation of G.A. Siwabessy Nuclear Reactor does not cause the radioactive increment to the air.
The calculation of annual body effective internal dose prediction for the same radioactive concentration and AMAD based on LUDEP 2.0 is different for each worker. This shows that lung capacity, dimension of respiratory tract and rate of respiration influence effective internal dose. Maximum effective internal dose received is approximately 10 mSv, compared to maximum external effective dose of 6.28 mSv, this contribution to total effective dose is not significant. According to ICRP
Publication 60, the value is much lower than the annual permissible maximum dose (20 mSv) representing for internal and external dose.
Results of the study suggests as follows :
1. To get the better results in measurements of radioactive concentration in
the air it is suggested to take more time of sampling and counting in order.
2. This study can be used for the assessment of radiation safety around nuclear installations, especially for the internal dose through inhalation pathway.
"
1999
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Rusbani Kurniawan
"Kehandalan sistem penanganan dan penyimpanan bahan bakar pada HTR 10 merupakan salah satu aspek kunci dari operasi reaktor. Sistem tersebut bekerja dengan memanfaatkan gaya gravitasi dan gaya dorong pneumatik untuk mengumpan, mensirkulasi dan membuang elemen bahan bakar yang berbentuk bola dengan diameter 60 mm secara kontinyu. Penelitian ini bertujuan untuk mengidentifikasi dan menilai risiko yang dapat terjadi pada setiap komponen desain sistem penanganan dan penyimpanan bahan bakar HTR 10 dengan menggunakan metode HAZOP dan dengan menggunakan pedoman kriteria risiko yang tertuang pada Peraturan Kepala BATAN No. 020/KA/I/2012. Data dianalisis dengan metode semi kualitatif dengan mengamati deviasi pada parameter yang telah ditetapkan pada setiap node sistem. Hasil penelitian menunjukkan bahwa desain sistem penanganan dan penyimpanan bahan bakar pada HTR 10 memiliki risiko awal yang cukup tinggi. Namun dengan desain tindakan pengendalian yang ada pada akhirnya akan mengkoreksi nilai risiko awal dengan cukup signifikan sehingga risiko sisa yang didapatkan turun hingga batas dapat diterima.

Fuel handling and storage system reability is one of the HTR 10 operation key aspects. A spherical form fuel element with a diameter of 60 mm continuously feed through to the core driven by gravity, circulated and discharged by gas pneumatic system. This study aims to identify and assess the risks that can occur in any component of the HTR 10 fuel handling and storage system design using the HAZOP and using risk criteria that described in BATAN Regulation No. 020/KA/I/2012. Data were analyzed using semi-qualitative method to observe deviations in the parameters that have been set on each node of the system. The results showed that the HTR 10 fuel handling and storage system design has a quite high initial risk. However, with the existing control design will ultimately adjust the value of the initial risk to the acceptable value."
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2016
T46537
UI - Tesis Membership  Universitas Indonesia Library
cover
Muhammad Yunus
"Pada teknologi penyimpanan basah, bahan bakar nuklir bekas disimpan di rak penyimpanan yang ditempatkan di dalam kolam air. Untuk mempertahankan temperatur air kolam agar berada pada batas kondisi operasi normal, panas yang dihasilkan akibat sisa peluruhan bahan bakar akan didinginkan oleh sistem pendingin. Pada penelitian ini akan dilakukan upaya penghematan energi pada sistem pendingin kolam bahan bakar bekas khususnya pada sistem chiller. Tujuan dari penelitian ini adalah mengembangkan desain Heat pipe Heat Exchanger (HPHE) pada sistem refrigerasi yang digunakan pada sistem pendingin loop sekunder. Dengan menggunakan sistem refrigerasi yang dilengkapi HPHE ini diharapkan dapat meningkatkan efektifitas dan penghematan penggunaan energi. Prototipe HPHE yang dikembangkan terdiri 5 buah heat pipe yang disusun sejajar dan dipasang diantara evaporator dan kompresor. Untuk melihat pengaruh HPHE terhadap performa sistem, maka dilakukan pengujian sistem refrigerasi dengan dan tanpa HPHE dan variasi beban kalor pada evaporator dengan variasi temperatur awal air 35 °C, 40 °C, 45 °C, 50 °C, dan 55 °C. Proses pengujian dilakukan selama 30 menit dengan daya penuh. Dari hasil pengujian diperoleh bahwa seiring dengan peningkatan variasi temperatur air, sistem refrigerasi mengalami penurunan kerja kompresor, peningkatan efek pendinginan, serta kenaikan coefficient of performance (COP). Penggunaan HPHE pada sistem refrigerasi terbukti mampu meningkatkan performa sistem dengan kerja kompresor yang semakin menurun, serta efek pendingin dan nilai COP yang semakin meningkat. Hasil optimal diperoleh pada variasi temperatur awal 55 °C dengan nilai kerja kompresor 48,1 kJ/kg, efek pendinginan 282,03 kJ/kg, dan COP 5,9. Resistansi termal HPHE semakin menurun seiring dengan kenaikan variasi temperatur air dengan nilai resitansi terbaik yaitu 0,37 °C/W. Dengan demikian, HPHE sangat potensial untuk diterapkan di sistem refrigerasi termasuk pada sistem pendingin kolam bahan bakar nuklir bekas demi meningkatkan efisiensi pendinginan dan menurunkan konsumsi listrik.

In wet storage technology, spent fuel is stored on storage racks placed within a water pool. To maintain the water pool temperature within the limits of normal operating conditions, the heat generated due to the residual decay of the spent fuel will be cooled by the cooling system. This study aims to implement energy-saving in the chiller system of the spent fuel pool cooling system, particularly focusing on the chiller system. The objective of this research is to develop a Heat Pipe Heat Exchanger (HPHE) design for the refrigeration system used in the secondary loop of the cooling system. By incorporating the HPHE in the refrigeration system, it is expected to enhance efficiency and energy conservation. The developed prototype of the HPHE consists of five parallelly arranged heat pipes installed between the evaporator and the compressor. To assess the impact of the HPHE on the system's performance, refrigeration system testing is conducted with and without the HPHE, considering variations in heat load on the evaporator with variation of initial water temperatures of 35 °C, 40 °C, 45 °C, 50 °C, and 55 °C. The testing process is carried out over 30 minutes at full power. Results from the testing indicate that with an increase in water temperature variations, The refrigeration system undergoes a reduction in compressor work, an enhancement in cooling efficiency, and an increase in the coefficient of performance (COP). The utilization of HPHE in the refrigeration system proves more effective in enhancing system performance, with a decreasing compressor work, an increasing cooling effect, and an elevated COP. The optimal results were obtained at an initial temperature variation of 55 °C, yielding a compressor work value of 48.1 kJ/kg, a cooling effect of 282.03 kJ/kg, and a COP of 5.9. The thermal resistance of the HPHE decreases with an increase in water temperature variation, with the best resistance value being 0.37 °C/W. Therefore, HPHE demonstrates significant potential for application in refrigeration systems, including those used in the cooling of spent fuel pools, to improve cooling efficiency and reduce electrical consumption."
Depok: Fakultas Teknik Universitas Indonesia, 2024
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Brilliand Tegar Verlambang
"ABSTRAK
Penelitian ini bertujuan untuk mencari karakteristik termal dari Vertical Two Phase Closed Thermosyphon (VTPCT) yang berfungsi sebagai pendingin pasif Spent Fuel Storage Pool di reaktor nuklir. Metode yang digunakan dalam penelitian ini ialah eksperimental. Eksperimen yang dilakukan berfokus pada pencarian nilai resistansi termal dan performa terbaik dari VTPCT dengan beberapa variasi parameter uji. Parameter yang divariasikan adalah tekanan inisiasi, laju aliran air pendingin, dan beban kalor. Hasil yang didapat menunjukkan bahwa tekanan inisiasi -740 mmHg dan laju aliran pendingin 4 liter/menit akan menghasilkan resistansi termal dan performa terbaik pada beban kalor maksimal.

ABSTRACT
The objective of this research is to find the thermal characteristic of vertical two-phase closed thermosyphon as a passive cooling system in spent fuel storage pool nuclear reactor. The method that used in this research is experimental. The focus of the experiment is to investigate the influence of some parameters on VTPCT?s performance and thermal resistance. Parameters are varied in initial pressure, coolant flow rate, and heat input. Based on the experiment result, we can conclude that the performance and thermal resistance of VTPCT will reach the best value when the initial pressure and the coolant flow rate are -740 mmH and 4 liters/minutes."
2016
S63091
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>