Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 130459 dokumen yang sesuai dengan query
cover
Ahmad Maksum
"Secara umum penelitian ini bertujuan untuk mengeksplorasi kemungkinan penggunaan limbah biomassa dalam proses reduction roasting bijih besi nikel laterite Indonesia. Adapun motif di balik penelitian ini adalah untuk meningkatkan nilai tambah dari bijih besi kadar rendah dan mendapatkan bio-reduktor baru yang akan menjadi alternatif pengganti batu bara di masa depan. Dalam penelitian ini diteliti tiga limbah biomassa sebagai agen pereduksi bijih besi nikel laterite dari Sorowako, yaitu: ampas tebu dari kabupaten Cirebon, cangkang sawit dari Palangkaraya - Kalimantan Tengah, dan sekam padi dari Kerawang - Jawa Barat. Adapun metode yang digunakan adalah reduction roasting dengan variasi parameter temperatur, rasio massa, dan waktu reduksi. Selanjutnya dilakukan analisis berdasarkan pola difraksi hasil X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF), dan Induced Couple Plasma Mass Spectroscopy (ICP-MS).
Hasil yang diperoleh dalam penelitian ini menunjukkan bahwa ampas tebu, cangkang sawit, dan sekam padi terbukti mampu digunakan sebagai agen pereduksi alternatif pengganti batu bara. Pada penelitian ini, ampas tebu hanya mampu menghasilkan fasa wustite dalam reduction roasting bijih besi nikel laterite, di mana hasil reduksi tertinggi diperoleh pada sampel dengan rasio massa 1:4 yang direduksi pada temperatur 1000°C selama 30 menit. Sementara itu, cangkang sawit mampu mereduksi bijih besi nikel laterite menjadi Fe metal, dimana parameter optimalnya adalah: rasio massa = 1:3, durasi waktu reduksi = 30 menit, dan temperatur reduksi 1000°C. Di samping itu, meskipun sekam padi hanya mampu mereduksi bijih besi sampai fasa magnetite (dimana hasil optimal diperoleh pada penambahan padi sebesar 20%), tetapi dari sekam padi berhasil diperoleh bio-silika amorf dengan tingkat kemurnian 99,99% dan specific surface area (luas permukaan spesifik) 192 m2/g.

In general, this study aims to explore the utilization of local biomass as renewable reducing agents in the reduction roasting of Indonesian nickel laterite iron ore. The motive behind this research is to increase the added value of low grade iron ore and to obtain reducing agents to substitute coal in the reduction process. In this study, the three of biomass which have potential to be used as reducing agents for coal substitutes in reducing nickel laterite iron ore from Sorowako, are: bagasse from Cirebon, palm shells from Palangkaraya - Central Kalimantan, and rice husk from Kerawang - Jawa Barat. The reduction method used is reduction roasting with various temperature, mass ratio, and reduction time. And the analysis is based on the diffraction pattern of X-Ray Diffraction (XRD), X-Ray Fluorescence (XRF), and Induced Couple Plasma Mass Spectroscopy (ICP-MS).
The results obtained in this study indicate that bagasse, palm kernel shells, and rice husks have been proven to be able to be used as an alternative reducing agent for coal substitution. In this study, bagasse was only able to produce the wustite phase in the reduction roasting of nickel laterite iron ore, where the highest reduction results were obtained in samples with a mass ratio of 1: 4 which was reduced at a temperature of 1000°C for 30 minutes. Meanwhile, palm kernel shells could reduce nickel laterite iron ore to Fe metal, where the optimal parameters were: mass ratio = 1: 3, reduction time duration = 30 minutes, and reduction temperature = 1000°C. In addition, although rice husk was only able to reduce iron ore to magnetite phase (where optimal results are obtained by adding rice by 20%), but from rice husk it was successfully obtained amorphous bio-silica with a purity level of 99.99% and specific surface area 192 m2/g."
Depok: Universitas Indonesia, 2019
D2617
UI - Disertasi Membership  Universitas Indonesia Library
cover
Muhamad Asmawisan Mulyanto
"Industri perkebunan kelapa sawit di Indonesia berkembang pesat dan merupakan yang terbesar di seluruh dunia. Jumlah limbah dari pengolahan kelapa sawit yang lebih besar dari produk utamanya yaitu, crude palm oil (CPO), sekitar 78% dari 1ton tandan buah segar (TBS). Permasalahan lingkungan akibat limbah kelapa sawit adalah pembusukan dari bahan organiknya. Hal ini menyebabkan perlunya penanganan limbah kelapa sawit secara tepat. Salah satu solusinya dengan memanfaatkan dari limbah padat kelapa sawit yaitu Cangkang Kelapa sawit sebagai biomassa umpan boiler. Penelitian tentang life cycle assessment (LCA) pada produksi cangkang kelapa sawit belum pernah dilakukan. Tujuan dari penelitian ini adalah melakukan LCA, di pabrik kelapa sawit dengan kapasitas produksi 30ton/jam di daerah Banten,untuk memperoleh data base jumlah emisi (CO2, SO2 dan PO4) yang dihasilkan menggunakan software SIMAPRO 9.0 dan CML 2001 dalam menentukan nilai dampak lingkungannya dengan batasan Cradle to Gate. Pada penelitian ini diperoleh data base dampak lingkungan dari produksi biomassa cangkang kelapa sawit adalah Global Warming Potential (GWP) sebesar 9,550 Kg CO2 eq/ton PKS, Acidification Potential (AP) 68.3 kg SO2 eq/ton CKS dan Eutrophication Potential (EP) 5.39 kg PO4 eq/ton PKS.

Palm oil mill in Indonesia is growing rapidly and the largest in the world. The processing of palm oil waste is still in conflict with environmetal problems. The amount of waste from palm oil processing is greater than its main product, crude palm oil (CPO), around 78% of 1 ton fresh fruit bunches (FFB). The environmental problem due to palm oil waste is the decay of the organic material. This leads to the need for oil palm waste handling appropriately. One of the solution by utilizing solid waste palm kernel shell for  biomass boiler feedstock. The research of life cycle assessment (LCA) of Palm Kernel shell production has not been reported. This study aims to conduct LCA, in palm oil mill with a production capacity 30 ton/hour in Banten,  to obtain data base of emission (CO2, SO2 dan PO2) by using SIMAPRO 9.0 and CML2001 as impact assessment method to know the value of environmental impact with boundary system Cradle to gate. In this study the data base of the environmental impact, is obtained from the production of palm kernel shell as biomass, are Global Warming Potential (GWP) of 9.550 kg CO2 eq/ton PKS, Acidification Potential (AP) 68.3 kg SO2 eq/ton PKS and Eutrophication 5.39 kg PO4 eq/ton PKS."
Depok: Fakultas Teknik Universitas Indonesia, 2020
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Burhanuddin As-Siraj
"Terak feronikel merupakan limbah hasil proses produksi feronikel. Kandungan dari terak feronikel terdiri dari logam berat yang berbahaya bagi lingkungan sehingga dikategorikan sebagai limbah B3. Karena terak feronikel masih mengandung logam berat, maka terak feronikel masih dapat dimanfaatkan dengan cara daur ulang dengan melakukan proses reduksi ulang. Proses reduksi umumnya dilakukan dengan menggunakan reduktor batu bara. Namun, pada penelitian kali ini menggunakan reduktor cangkang kelapa sawit sebagai alternatif pengganti batu bara. Reduktor cangkang kelapa sawit dipilih karena ketersediannya di Indonesia memadai, mengingat Indonesia merupakan produsen minyak kelapa sawit terbesar di Dunia. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh reduktor cangkang kelapa sawit dan konsentrasinya (wt.%) terhadap proses reduksi terak feronikel. Sampel awal merupakan terak feronikel yang telah dilakukan proses roasting dengan penambahan 20 wt.% aditif natrium karbonat (Na2CO3). Sampel tersebut kemudian dicampurkan dengan reduktor batu bara atau cangkang kelapa sawit dengan perbandingan (sampel : reduktor) yaitu 15:85, 20:80, dan 25:75. Sampel yang telah dicampur kemudian dilakukan kompaksi menggunakan mesin kompaksi. Lalu dilakukan proses reduksi menggunakan tube furnace pada temperatur 1100°C selama 60 menit dengan laju pemanasan 10°C/menit. Produk hasil reduksi kemudian dilakukan pengujian SEM-EDS dan XRD untuk dilakukan analisis lebih lanjut. Berdasarkan hasil karakterisasi, didapatkan bahwa proses reduksi menggunakan reduktor batu bara dan cangkang kelapa sawit menghasilkan produk berupa logam besi, magnetit, hematit, dan natrium silikat. Pada penelitian ini, penggunaan reduktor cangkang kelapa sawit menghasilkan hasil reduksi yang lebih baik daripada reduktor batu bara. Konsentrasi reduktor optimum adalah dengan penambahan 15 wt.% reduktor.

Ferronickel slag is a waste that produced by ferronickel production process. Ferronickel slag consists of heavy metals which are harmful to the environment, so its categorized as B3 waste. Because ferronickel slag still contains heavy metals, ferronickel slag can still be utilized by recycling with reduction process. Reduction process usually use coal as reducing agents. However, this study will use palm kernel shell as an alternative reducing agents to substitute coal. Palm kernel shell was chosen as an alternative reducing agents because of their availability in Indonesia, because Indonesia is the worlds largest palm oil producer. The purpose of this study is to determine the effect of palm kernel shell as reducing agents and its concentration (wt.%) to the ferronickel slag reduction process. The initial sample is ferronickel slag which had been roasted by adding 20 wt.% sodium carbonate Na2CO3 as an additive. The roasted product is then mixed with coal or palm kernel shell reductant by ratio (sample : reductant), which are 15:85, 20:80, and 25:75. Samples that have been mixed are then compacted using compacting machine. Then the reduction process is carried out using a tube furnace at a temperature of 1100°C for 60 minutes with a heating rate of 10°C/minute. The reduced product is then characterized by SEM EDS and XRD for further analysis. Based on the results of the characterization, it was found that the reduction process using coal and palm kernel shell produces products in the form of iron metal, magnetite, hematite, and sodium silicate. In this research, the use of palm kernel shell reducing agents results is better than coal. The optimum reducing agents concentration is by adding 15 wt.% reducing agents.
"
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Desy Qoiriyani
"Semakin meningkatnya konsumsi listrik dunia menuntut para peneliti untuk menemukan sumber energi baru. Penelitian Microbial Fuel Cell (MFC) sebagai salah satu sumber energi alternatif dilaksanakan untuk mengetahui kapasitas dan efisiensi produksi energi listrik yang dihasilkan. Penelitian ini menggunakan reaktor jenis single-chamber tanpa membran penukar ion dengan limbah cair pabrik tempe sebagai substrat. Elektroda yang digunakan sebagai mediator elektron adalah elektroda grafit. Variasi perlakuan awal anoda dilakukan dengan menumbuhkan biofilm pada anoda selama 3 minggu sebelum eksperimen (anoda prekolonisasi) dan membandingkan dengan sistem menggunakan anoda yang tidak ditumbuhi biofilm (anoda bersih). Variasi penambahan substrat berupa kulit ari kedelai juga dilakukan untuk mendapatkan hasil yang maksimum. Hasil dari penelitian ini menunjukkan sistem dengan anoda bersih tanpa penambahan substrat kulit ari kedelai menghasilkan produksi listrik terbesar dengan densitas daya sebesar 1009,34 mW/m2. Penelitian ini juga menggunakan limbah cair pabrik tempe dan dihasilkan densitas daya sebesar 44,62 x 10-2 mW/m2.

Increasing of world electricity consumption in the world make researchers try to find new energy source. Researching Microbial Fuel Cell as a new energy source did for knowing electricity production capacity and efficiency. Single chamber reactor without ion exchange membrane with industry tempeh wastewater used in this experiment. We used graphite electrode as an electron mediator. Make biofilm grow in the anode for 3 weeks (precolonization anode) did for system variation and then we compared with clean anode system. Skin of soy bean used as a substrate in the system for second variation. Optimum electricity production obtained from clean anode without addition of soy bean skin system. Power density obtain was 1009,34 mW/m2 when using wastewater model and 44,62 x 10-2 mW/m2 when using industry tempeh wastewater."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S44239
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ni Putu Wendi Yunianti
"Tugu Ibu Depok hospital is a type C hospital. As a health care provider, Tugu Ibu hospital has many activities and provides many services. With the Bed Occupancy Rate (BOR) of 50-70%, the hospital generates quite a lot both medical and non-medical solid waste. The hospital should organize and conduct waste minimization program to prevent pollution.
The objective of this research was to analyze the waste minimization efforts and management of medical and non-medical solid waste. This research used qualitative and quantitative approaches. Data collection was done using in-depth interviews, observation, and document review.
The results of this research showed that the Tugu Ibu Depok hospital has conducted a program of waste minimization through waste reduction by sorting it (segregation and housekeeping). The hospital has never been reused nor recycled the waste. The management of solid waste from sorting, collecting, transportion, storage and waste disposal are properly organized. Medical waste incineration has been done by third party.
To improve waste minimization efforts, specific standard operating pdures (SOP) to reduce and reuse waste is needed. It is also suggested to conduct training Latar Melanon waste minimization and reuse techniques. Strong commitme fro top-level management is needed.
"
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2012
S42827
UI - Skripsi Open  Universitas Indonesia Library
cover
Mara, D. Duncan (David Duncan), 1944-
Bandung: ITB Press, 1994
363.728 MAR p
Buku Teks  Universitas Indonesia Library
cover
Kemal Hidayat Andrianto
"Volume sampah yang dihasilkan oleh kegiatan manusia jumlahnya lebih banyak daripada jumlah sampah yang bisa terangkut ke tempat pembuangan akhir. Penelitian ini memiliki tujuan untuk mengetahui tingkat pengetahuan dan volume timbulan sampah yang dihasilkan oleh SMP Negeri 230 Jakarta. Metode penelitian ini adalah kuasi eksperimen dengan menggunakan rancangan The One Group Pre-Test and Post-Test Design. Intervensi yang diberikan berupa sosialisasi tentang sampah dan pembuatan lubang resapan biopori. Pengukuran data dilakukan sebanyak dua kali yaitu saat sebelum dan sesudah diberikan perlakuan terhadap responden. Adapun responden di dalam penelitian ini ada sebanyak 101 orang siswa. Hasilnya menunjukkan terdapat kenaikan rata-rata tingkat pengetahuan siswa dari 8,01 (sebelum sosialisasi) menjadi 9,04 (setelah sosialisasi). Hasil uji statistik menunjukkan adanya peningkatan tingkat pengetahuan yang signifikan (p<0,001) antara sebelum dan sesudah intervensi. Volume rata-rata timbulan sampah sekolah mengalami penurunan dari 395,275 Liter (sebelum sosialisasi dan pembuatan lubang biopori) menjadi 325,545 Liter (setelah sosialisasi dan pembuatan lubang biopori. Disimpulkan bahwa intervensi berupa sosialisasi dan pembuatan lubang biopori meningkatkan tingkat pengetahuan responden dan menurunkan volume timbulan sampah sekolah.

The volume of waste produced by human activities is higher than the amount of waste that can be transported to landfills. This study aims to determine the level of knowledge and volume of waste produced by SMP Negeri 230 Jakarta. The method of this research is a quasi-experiment using the design of The One Group Pre-Test and Post-Test Design. The intervention given was the socialization about waste and making biopori infiltration holes. Data measurements were carried out twice, namely before and after treatment of respondents. The respondents in this study were 101 students. The results indicate an increase in the average level of student knowledge from 8.01 (before socialization) to 9.04 (after socialization). Statistical test results showed a significant increase in the level of knowledge (p <0.001) between before and after the intervention. The average volume of school solid waste has decreased from 395.275 liters (before socialization and biopori hole making) to 325.545 liters (after socialization and biopori hole making) It was concluded that interventions in the form of socialization and making biopori holes increased respondents knowledge level and decreased the volume of school waste generation."
Depok: Fakultas Kesehatan Masyarakat Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Mutiara A. Wanatami
"Pada kegiatannya rumah sakit menghasilkan limbah yang apabila tidak dikelola dengan baik akan memberikan dampak negatif bagi masyarakat dan lingkungan. Tingkat hunian (BOR) sebesar 65% tentu akan menghasilkan limbah padat yang cukup banyak. Pengelolaan limbah padat rumah sakit ini belum dikelola dengan baik sesuai dengan peraturan. Pelaksanaan minimisasi limbah padat belum cukup dilakukan dengan baik. Penelitian ini bertujuan untuk pengetahui pengelolaan dan upaya minimisasi limbah padat. Metode penelitian dilakukan dengan pendekatan kuantitatif. Hasil penelitian menunjukkan jumlah timbulan limbah padat medis rata-rata 118,95 kg/hari atau 0,46 kg/hari/tempat tidur dan jumlah timbulan limbah padat non medis rata-rata adalah 189,4 kg. Penggunaan insinerator belum optimal sehingga mengakibatkan pemborosan dalam penggunaan bahan bakarnya sebanyak 450 liter atau senilai Rp. 3.600.000,- setiap bulan. Minimisasi limbah non medis melalui daur ulang atau penjualan kembali ini akan membawa nilai manfaat ekonomi yaitu menambah pendapatan RSUD Raden Mattaher Jambi sebesar Rp. 82.479.600,- per tahun.

Hospitals in their activities will produce some solid waste that if not good manage will give a negative impact for the soiciety itself and the environment With Bed Occupancy rate BOR of 65 this hospital generates quite a lot of solid waste The Management of solid wasteand minimization activity in this hospital has not been managed well according to Government Decree and Health Minister Decision This reasearch aims to know how the hospital minimize and process the solid waste This research used kuantitative approach The result of this research showed the generation of medical solid waste every day an average of 118 95 kg or 0 46 kg bed day and the generation of non medical solid waste every day an average of 189 4 kg The usage of insinerator has not been optimum this may cause the excessive use of fuels as 450 liters or worth as Rp 3 600 000 The waste minimization activities such as recycle by reselling will bring economic benefit that add value RSUD Raden Mattaher Jambi income of Rp 52 743 600 per year."
Jakarta: Program Pascasarjana Universitas Indonesia, 2015
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Huriya
"Teknologi membran saat ini sudah banyak diaplikasikan untuk mengolah limbah berbagai industri, salah satunya dapat industri tahu. Namun di Indonesia, pengolahan limbah industri tahu masih menggunakan metode konvensional dan belum memenuhi baku mutu pemerintah, sehingga dibutuhkan metode pengolahan yag lebih efektif. Penelitian ini bertujuan untuk melakukan preparasi serta menguji kinerja membran polisulfon dengan proses filtrasi untuk pengolahan limbah cair industri tahu. Penelitian ini diawali oleh preparasi membran polisulfon (PSf) dengan pelarut n-metil-2-pirolidon (NMP) dan aditif polivinilpirolidon (PVP) dengan metode inversi fasa dan teknik imersi presipitasi, dengan variasi massa PVP sebanyak 0,15 gram; 0,25 gram; dan 0,35 gram. Membran yang telah dipreparasi kemudian dikarakterisasi menggunakan SEM, FTIR, serta sudut kontak. Limbah cair tahu sebagai umpan filtrasi telah melalui proses pre-treatment dengan metode koagulasi-flokulasi. Kemudian limbah umpan tersebut difiltrasi menggunakan membran PSf/NMP/PVP dengan variasi umpan 4, 5, 6, dan 7 bar. Penambahan konsentrasi PVP meningkatkan porositas dan hidrofilisitas, namun penambahan PVP yang berlebihan akan meningkatkan viskositas membran sehingga membuat membran menjadi lebih padat. Hal ini yang menyebabkan fluks air dan fluks permeat mengalami kenaikan pada membran PSf/NMP/PVP0,15 dan PSf/NMP/PVP0,25 namun namun menurun pada PSf/NMP/PVP0,35. Rejeksi COD dan TDS yang dihasilkan pada penelitian berkisar antara 8,3% hingga 60,53% dan 4,77% hingga 28,57%; sedangkan rejeksi TSS dan kekeruhan yang dihasilkan berkisar antara 16,67% hingga 75% dan 8,3% hingga 75%; dan pH berkisar antara 7,28 hingga 7,58.
.....Membrane technology nowadays is applied for wastewater treatment in multiple industries, one of them is the tofu industry. However in Indonesia, tofu industrial wastewater treatment still uses the conventional method that has yet to meet the government’s quality standards, so a more effective treatment method is needed. This research aimed to prepare and examine the performance of polysulfone (PSf) membrane using n-methyl-2-pyrrolidone (NMP) solvent and polyvinylpyrrolidone (PVP) additive according to phase inversion method by immersion precipitation technique, with PVP mass variation of 0,15; 0,25; and 0,35 grams. Membrane that has been prepared is then characterized by undergoing several tests of SEM, FT-IR, and contact angle. First, tofu wastewater as feed has been through the pre-treatment process using coagulation-flocculation method. The feed is then filtrated using prepared PSf/NMP/PVP membranes with pressure variation of 4, 5, 6, and 7 bars. The addition of PVP concentrations increases porosity and hydrophilicity, but the excessive addition of PVP will increase membrane viscosity thereby making the membrane denser. This is what causes the water flux and permeate flux to increase in PSf/NMP/PVP0,15 and PSf/NMP/PVP0,25 membranes but decrease in PSf/NMP/PVP0,35 membrane. The COD and TDS rejection percentages resulted in this research ranged from 8,3% up to 60,53% and 4,77% up to 28,57%; the TSS dan turbidity rejection percentages ranged from 16,67% up to 75% and 8,3% up to 75%, meanwhile the pH varies from 7,28 to 7,58."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
B. Handoko Purwojatmiko
"Penanganan limbah elektronik yang tidak tepat dapat menyebabkan dampak negatif terhadap lingkungan dan kesehatan manusia. Limbah elektronik dihasilkan dari perkembangan pesat teknologi manufaktur yang mendorong revolusi industri sehingga berdampak pada pertumbuhan ekonomi, terutama di negara-negara berkembang seperti Indonesia. Extended Producer Responsibility (EPR) adalah pendekatan kebijakan lingkungan yang berorientasi terhadap tanggung jawab produsen. Akan tetapi perkembangan EPR di negara berkembang masih kurang, dimana sistem pengumpulan dan daur ulang belum cukup diperhatikan. Di sisi lain, motivasi produsen dari sektor industri belum memiliki perhatian yang cukup untuk memperluas tanggung jawab produk mereka hingga tahap pasca konsumsi, terutama untuk mengambil kembali, memulihkan dan membuang. Studi ini mengeksplorasi faktor-faktor kunci yang dapat memotivasi produsen untuk sepenuhnya mengadopsi konsep EPR dalam industri elektronik di Indonesia. Model yang dibangun berdasarkan pada Theory of Planned Behavior (TPB) yang diperluas dalam konteks EPR. Model ini dibentuk oleh tiga konstruksi utama: perilaku individu, norma subyektif dan persepsi kontrol perilaku, serta tiga faktor lain yang diidentifikasi dari tinjauan pustaka dan wawancara kepada perwakilan perusahan yaitu insentif ekonomi, insentif administrasi dan insentif logistik. Faktor-faktor tersebut terlibat dalam membentuk intensi untuk melakukan suatu perilaku. Hasil yang didapatkan dari analisis jalur bahwa faktor insentif administrasi hanya dapat mempengaruhi intensi sedangakan insentif logistik dapat mempengaruhi perilaku produsen elektronik untuk mengadopsi EPR

Improper handling of WEEE (Waste Electrial and Electronic Equipment) can cause negative impacts on the environment and human health. WEEE is generated from the rapid development of manufacturing technology that has pushed the industrial revolution to have an impact on economic growth, especially in developing countries such as Indonesia. Extended Producer Responsibility (EPR) is an environmental policy approach that is oriented towards producer responsibility. However, the development of EPR in developing countries is still lacking, where the collection and recycling system has not been adequately addressed. On the other hand, the motivation of producers from the industrial sector does not have enough attention to expand their product responsibilities to the post-consumption stage, especially to take back, recover and dispose. This study explores the key factors that can motivate producers to fully adopt the EPR concept in the electronics industry in Indonesia. The model built based on extended Theory of Planned Behavior (TPB) in the context of EPR. This model is formed by three main constructs: attitude, subjective norms and perceived behavioral control, and three other factors that identified from literature reviews and interviews with producer representatives namely economic incentives, administrative incentives and logistic incentives. These factors are involved in forming the intention to behavior. The results obtained from the path analysis that administrative incentive factors can only influence intention while logistic incentives can influence the behavior of electronic producers to adopt EPR."
Depok: Fakultas Teknik Universitas Indonesia, 2019
T54370
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>