Hasil Pencarian  ::  Simpan CSV :: Kembali

"Termotivasi untuk memperluas studi teoritis yang pernah dilakukan sebelumnya, kami melakukan perhitungan konduktivitas optik tergantung temperatur pada La0:7Ca0:3MnO3 dalam rentang energi foton yang luas hingga 22 eV, untuk menangkap transisi logam ke insulator, dengan tetap mempertahankan profil ketergantungan terhadap temperatur yang sesuai dengan data eksperimen pada energi foton yang lebih tinggi. Sistem dimodelkan dengan koordinasi Mn-O sederhana melalui metode tight binding dengan beberapa integral hopping dianggap sebagai fungsi magnetisasi. Menggabungkan efek Jahn-Teller statis, Coulomb-Hubbard dan interaksi pertukaran magnetik, kami dapat mereproduksi tren kualitatif dari konduktivitas optik yang tergantung pada suhu, terutama untuk rezim energi rendah dan tinggi, seperti yang diamati dalam data eksperimen. Hasil kami menggarisbawahi pentingnya efek korelasi yang saling mempengaruhi pada derajat kebebasan kisi, muatan dan magnet dalam menentukan profil keseluruhan respon optik terhadap temperatur dari manganite, hubungannya dengan respon fisika optik energi tinggi dan sifat transpor listrik DC.

---

Motivated to extend our previous theoretical study, we perform temperaturedependent optical conductivity calculation on La0:7Ca0:3MnO3 in a wide photon energy range up to 22 eV, to capture the metal to insulator transition, while still preserving in most way the correct temperature-dependent profile at higher photon energies. The system is modeled with a simple Mn-O coordination via the tight binding method with some hopping integrals being considered as functions of magnetization. Incorporating static Jahn-Teller effect, Coulomb-Hubbard and magnetic exchange interactions, we are able to reproduce the qualitative trend of the temperature-dependent optical conductivity, especially for the low-and high-energy regimes, as observed in the experimental data. Our results underline the importance of correlation effects due to interplay of lattice, charge, and magnetic degrees of freedom in determining the overall profile of temperature-dependent optical response of manganites, connecting the physics of high-energy optical response and the transport properties at the dc limit."

"Barcode merupakan kumpulan data optik yang dapat dimengerti sebuah mesin dan memiliki fungsi yang sangat luas, sebagai contoh adalah karcis parkir kendaraan. Karcis parkir merupakan penanda sebuah kendaraan agar bisa keluar dan masuk ke dalam parkiran tersebut. Kendaraan dapat keluar dari area parkir dengan memindai barcode yang tertera pada karcis parkir. Namun, seringkali karcis parkir memiliki kerusakan yang menyebabkan barcode yang tertera sulit terbaca dengan alat pemindaian dan kendaraan tidak dapat keluar dari area parkir. Kerusakan bisa disebabkan karena kelalaian manusia (terkena air yang menyebabkan karcis basah, atau terlipat-lipat sehingga lecek) dan juga kesalahan pencetak. Untuk menanggulangi permasalahan tersebut, sistem pembacaan barcode karcis parkir dikembangankan. Sistem tersebut menggunakan Autoencoder dan Conditional Generative Adversarial Network (CGAN) dalam merekonstruksi barcode. Barcode dikatakan berhasil direkonstruksi bila decoder (pyzxing dan pyzbar) dapat decoding gambar barcode rekonstruksi tersebut. Penelitian ini menunjukan bahwa model CGAN mampu merekonstruksi karcis parkir dunia nyata dengan true recognition rate 16% tanpa super resolution, sedangkan untuk model autoencoder masih belum mampu untuk merekonstruksi barcode dengan baik. Dengan super resolution, performa kedua model menurun dalam merekonstruksi barcode. CGAN juga lebih baik dibandingkan dengan autoencoder dalam rekonstruksi barcode generated dengan 1x augmentasi. Dengan menggunakan pyzxing decoder, Autoencoder mampu merekonstruksi barcode yang tidak terbaca dengan true recognition rate sebesar 95,50% dan CGAN mampu menghasilkan true recognition sebesar 97% dengan durasi prediksi rata-rata autoencoder 0,17 detik dibandingkan dengan CGAN 0,672 detik per 1 gambar.

---

Barcode is a collection of optical data that can be scanned by a machine and has a broad function, such as a vehicle parking ticket. A parking ticket is a marker for a vehicle to enter and exit the parking lot. Vehicles can exit the parking area by scanning the barcode printed on the parking ticket. However, parking tickets often have damage that cause the barcodes printed are difficult to be scanned and the vehicle cannot exit parking area. Damage can be caused by human error (wet tickets, or it folds up so that it becomes wrinkled) as well as printer error. To overcome this problem, a parking ticket barcode reconstruction system was developed. The system uses Autoencoder and Conditional Generative Adversarial Network (CGAN) in reconstructing barcodes. The barcode is said to be reconstructed successfully if the decoders (pyzxing and pyzbar) can decode the reconstructed barcode image.

This paper shows that the CGAN model can reconstruct real-world parking tickets with a true recognition rate of 16% without super resolution, while the autoencoder model is still unable to reconstruct barcodes properly. With super resolution, the performance of both models decreases in reconstructing barcodes. CGAN is better than autoencoder in reconstructing barcode generated with 1x augmentation. Using the pyzxing decoder, Autoencoder can reconstruct unreadable barcodes with a true recognition rate of 95.50% and CGAN is able to produce true recognition of 97% with an average autoencoder prediction duration of 0.17 seconds compared to CGAN of 0.672 seconds per 1 image."

"Developing many of the major, exciting, pre- and post-millennium developments from the ground up, this book is an ideal entry point for graduate students into quantum information theory. Significant attention is given to quantum mechanics for quantum information theory, and careful studies of the important protocols of teleportation, superdense coding, and entanglement distribution are presented. In this new edition, readers can expect to find over 100 pages of new material, including detailed discussions of Bell's theorem, the CHSH game, Tsirelson's theorem, the axiomatic approach to quantum channels, the definition of the diamond norm and its interpretation, and a proof of the Choi–Kraus theorem. Discussion of the importance of the quantum dynamic capacity formula has been completely revised, and many new exercises and references have been added. This new edition will be welcomed by the upcoming generation of quantum information theorists and the already established community of classical information theorists."

"Pada makalah ini dilaporkan hasil rancang bangun penyempurnaan probe optik untuk mengukur konsentrasi suspensi phytoplankton. Dari hasil pengujian skala laboratorium dengan menggunakan kultur Scenedesmus sp. ditunjukkan bahwa untuk rentang konsentrasi dari 10 pangkat 4 hingga di sekitar 1 x 10 pangkat 6 sel/mL intensitas fluoresensi pada λ = 685 nm memiliki hubungan yang linier terhadap konsentrasi sel dengan konstantaproporsianlγ = 4×10-5mL/sel. sementara itu untuk rentang konsentrasi yang sama, logaritma intensitas pada λ= 405 nm berbanding lurus dengan konsentrasi sel dengan konstatnta proporsional β= ?2×10-7mL/sel.

---

This paper discusses the results of improved optical probe that works according to optical fluorescence and absorption phenomena for measuring the phytoplankton suspension concentrations. Measurements are made on the Scenedesmus sp. culture. The laboratory test has shown that range of concentration from 10 up to around 1 x 10 cells/mL; fluorescence intensity at λ= 685 nm; and logarithmic of transmission intensity at λ = 405 nm are proportional to the cell concentration linear with proportional constant γ=4×10-5 and β= ?2×10-7mL/cell respectively."

"Optical differentiation is one of many methods in the optical data processing that is useful for, e.g. image contouring. In this thesis, the differentiation filter is caried out based on the spatial filtering techniques. The ob ject is transformed with a Fourier lens to obtain the spatial frequency spectrum of the object at the Fourier plane. A spatial differentiation filter is placed at the Fourier plane. And finally, with another lens the filtered spectrum is transformed back to obtain the output image. The critical step of the experiment is the design and the fabrication of the filter. In this thesis, two kinds of models have been used to approximate the differentiation filters: (1) multi-step function and (2) Gaussian spot. The multi-step function is intended to approximate the first order differentiation filter. However, due to the photographic limitations, the multi-step function has become a single step function or simply a high-pass filter. Nevertheless, the result may be useful as the approximation of the second (not the first) order differentiation. A filter with a diameter of 0.4 mm appears to give a good result for an object consisting of letters of 4 mm high. To obtain the Gaussian spot, a He-Ne laser beam spot with 6328 nm has been used. with several attenuations, the laser beam spot has been recorded with various shutter speeds in an open camera. It appear that the Gaussian filter is a very good approximation of the second order differentiation filter. Compared to the high-pass filter, it gives higher S/N ratio. The Gaussian spot obtained with a shutter speed of 1/4000 and minimum attenuation gives the best image output. However, none of the filters gives the first order differentiation output."

"The 4th edition of this popular Handbook continues to provide an easy-to-use guide to the many exciting new developments in the field of optical fiber data communications. With 90% new content, this edition contains all new material describing the transformation of the modern data communications network, both within the data center and over extended distances between data centers, along with best practices for the design of highly virtualized, converged, energy efficient, secure, and flattened network infrastructures.Key topics include networks for cloud computing, software defined networking, integrated and embedded networking appliances, and low latency networks for financial trading or other time-sensitive applications. Network architectures from the leading vendors are outlined (including Smart Analytic Solutions, Qfabric, FabricPath, and Exadata) as well as the latest revisions to industry standards for interoperable networks, including lossless ethernet, 16G Fiber Channel, RoCE, FCoE, TRILL, IEEE 802.1Qbg, and more."

"Koefisien difusi merupakan nilai besaran yang menjadi karakterisasi perambatan konsentrasi di antara dua atau lebih zat yang sedang bercampur. Proses difusi memiliki peran penting dalam berbagai aplikasi di bidang kimia, industri, serta dalam kontrol polusi. Metode Wiener’s digunakan untuk memperoleh koefisien difusi larutan karena metode ini dianggap paling efektif dan akurat. Metode ini dipadukan dengan image processing menggunakan Python 3.9 untuk memperoleh nilai koefisien difusi dengan cepat dan akurat. Variasi medan magnet diberikan untuk mengetahui repon sistem, didapat pada larutan dengan kandungan unsur logam didalamnya akan terjadi surface plasmon resonance yang akan mengurangi koefisien difusi larutan-larutan tersebut. Menggunakan sistem ini didapat besar DNaCl-Akuades,DNaCl-Nanogold dan DNaCl-SBF dengan R^2 >= 0.95 Berdasarkan nilai tersebut diperoleh deteksi tepi Sobel lebih baik dari Canny.

---

.The difusion coefficient is a quantity that characterizes the concentration propagation between two or more substances that are mixed. Difusion processes have an important role in a wide range of applications in chemistry, industry, and pollution control. The Wiener experiment Setup method is used to obtain the diffusion coefficient of the solution because this method is considered the most effective and accurate. This method is combined with image processing using Python 3.9 to obtain the value of the difusion coefficient fast and accurately. The variation of the magnetic field given to determine the response system, obtained in a solution containing metal elements where in it will occur surface plasmon resonance which will reduce the difusion coefficient of these solutions. Using this system, we get DNaCl-Akuades,DNaCl-Nanogold and DNaCl-SBF are obtained with a value of R^2 >= 0.95. Based on this value, the Sobel edge detection is better than Canny."

"

Substitusi Mg pada site-La material LaFeO3 (La1-xMgxFeO3, dengan x=0.0, 0.1, 0.2 dan 0.3) telah dilakukan dengan metode sintesis sol-gel. Sifat struktur material perovskite La1-xMgxFeO3 dikarakterisasi menggunakan XRD, XRF, BET, SEM dan EDX. Analisis XRD material La1-xMgxFeO3 menunjukkan struktur Orthorhombic dengan space group Pnma. Terjadi penurunan crystallite size seiring dengan meningkatnya konsentrasi Mg. Analisis BET menunjukkan terjadinya peningkatan surface area seiring penambahan konsentrasi Mg. Hasil SEM menunjukkan bahwa ukuran grain terlihat semakin menurun dan terjadi aglomerasi. XRF dan EDX mengkonfirmasi adanya unsur La, Mg, Fe dan O pada material perovskite La1-xMgxFeO3. Sifat optik dikarakterisasi dengan menggunakan FTIR, Raman spectroscopy dan UV-Vis. FTIR mengkonfirmasi adanya stretching vibration La/Mg−O, Fe−O dan bending vibration Fe−O−Fe. Hasil karakterisasi UV-Vis menunjukkan penurunan nilai energi band gap dengan rentang 2.14–2.05 eV. Sifat listrik material diuji menggunakan RLC-meter dengan metode Impedance Spectroscopy (IS) pada temperatur ruang dan temperatur tinggi (30oC-200oC).

---

Mg substitution on La-site at LaFeO3 (La1-xMgxFeO3, with x=0.0, 0.1, 0.2, and 0.3) has been done by sol-gel method. The structural properties of La1-xMgxFeO3 perovskite material were characterized using XRD, XRF, BET, SEM and EDX. XRD analysis of La1-xMgxFeO3 material shows the Orthorhombic structure with the Pnma space group. There was a decrease in crystallite size with increasing Mg concentration. BET analysis shows an increased surface area with the increase of Mg concentration. SEM analysis shows that the grain size appears to decrease and agglomeration occurs. XRF and EDX confirmed the presence of La, Mg, Fe and O element in La1-xMgxFeO3 perovskite material. Optical properties were characterized using FTIR, Raman spectroscopy and UV-Vis. FTIR confirmed the presence of stretching vibration of La/Mg−O, Fe−O and bending vibration of Fe−O−Fe. The results of UV-Vis characterization showed a decrease in the band gap energy value with a range of 2.14–2.05 eV. The electrical properties were characterized by RLC-meters using Impedance Spectroscopy (IS) method at room temperature and high temperatures (300C-2000C).

"