Hasil Pencarian  ::  Simpan CSV :: Kembali

"Thin film yang memiliki sifat PMA (Perpendicular Magnetic Anisotropy) memiliki arah momen magnet yang tegak lurus dengan permukaan film. Sifat ini memungkinkan thin film diaplikasikan dalam perpendicular magnetic recording yang digunakan sebagai penyimpanan data komputer. Maka dari itu, penting untuk mempelajari sifat magnetik dari thin film terutama mekanisme magnetization reversal. Pada penelitian ini akan dilihat hubungan antara mekanisme magnetization reversal pada thin film Co/Pt dan CoFeB/Pd dengan parameter  pada model Fatuzzo-Labrune. Jika magnetisasi kedua thin film dibalik dari kondisi tersaturasi sempurna, maka nilai  yang berarti mekanisme magnetization reversal akan didominasi oleh domain wall motion. Ketika magnetisasi kedua thin film dibalik dari kondisi tidak tersaturasi sempurna, maka nilai  akan berubah bergantung pada kondisi awal magnetisasi thin film. Kita akan melihat bahwa dari kedua kondisi yang berbeda, mekanisme magnetization reversal dapat dijelaskan dengan baik oleh model Fatuzzo-Labrune.

---

Thin film with PMA (Perpendicular Magnetic Anisotropy) has magnetic moment perpendicular with its surface. This property allows thin film to be applied to perpendicular magnetic recording used in computer data storage. Therefore, it is important to study magnetic properties, especially magnetization reversal mechanism. In this study, we will see the correlation between magnetization reversal mechanism of Co/Pt and CoFeB/Pd thin films and  parameter on the Fatuzzo-Labrune model. If the magnetization reversal process of both films started from a fully saturated state, the value of  which means magnetization reversal mechanism will be dominated by domain wall motion. If the magnetization reversal process of both films is not started from a fully saturated state, the parameter  will change depends on the initial magnetization state. We will see that from two different conditions, magnetization reversal mechanism is well described by Fatuzzo-Labrune model."

"Fourier transform infrared (FTIR) microspectrometry was used to characterize thin conducting films of poly[2 methoxy-5(2-ethylhexylox)-1,4] phenyelenevinylene (MEH-PPV)....."

"Spesiasi logam berat Pb dan Cr dengan metode ekstraksi bertahap dan migrasinya dari sedimen perairan teluk Jakarta menggunakan metode Diffusive Gradient in Thin Film (DGT), telah dilakukan di laboratorium Departemen Kimia UI, dengan sampel sedimen dari Cengkareng Drain, Kapuk, Jakarta Utara. Hasil penelitian logam berat dengan Ekstraksi bertahap diperoleh, logam Pb antara 43,473 ppm hingga 58,123 ppm, logam Cr 20,763 ppm hingga 30.219 ppm. Distribusi logam berat Pb dalam sedimen berupa senyawa karbonat ± 6 % , 5,5% oksida Mn, 21,779% oksida Fe, 29,624% dalam senyawa organik dan fraksi sisa 36,879%. Distribusi logam Cr 4,183% berupa senyawa karbonat, 4,325% terikat dalam oksida Mn , 23,713% terikat dalam oksida Fe, 30,827% terikat dalam senyawa organik dan 36,325% dalam fraksi residu. Hasil penelitian migrasi logam berat Pb dari sedimen ke badan air pada kondisi oxic penggelaran 1 hari berkisar 0,0108 ppm sampai 0,1314 ppm, pada penggelaran 4 hari diperoleh 0,042 ppm hingga 0,081 ppm. Untuk kondisi anoxic penggelaran 1 hari diperoleh 2,444 ppm , 3 hari 0,320 ppm dan 5 hari 3,432 ppm. Migrasi logam berat Cr pada kondisi oxic penggelaran 1 hari diperoleh berkisar 0,1413 ppm hingga 0,3431 ppm, 4 hari berkisar 0,0012 ppm hingga 0,0084 ppm. Untuk kondisi anoxic penggelaran 1 hari 1,5792 ppm , 3 hari 0,0545 ppm dan 5 hari 2,9629 ppm. Pengukuran dengan DGT strip gel pada kondisi anoxic, diperoleh distribusi logam berat Pb berada pada kedalaman 1-5 cm dengan kadar 0,1279 ppm hingga 3,1977 ppm dan logam berat Cr berdistribusi pada kadar 2,6649 ppm hingga 7,2668 ppm.Dari hasil ini diperoleh gambaran bahwa ketersediaan konsentrasi logam berat dalam sedimen cukup memungkinkan adanya migrasi logam ke badan air.

---

Heavy metal speciation of Pb and Cr by sequential extraction and migration from sediments into the waters of Jakarta Gulf using Diffusive Gradient in Thin Films (DGT) method has been conducted using sediment samples from Cengkareng Drain Kapuk- North Jakarta. The extraction of heavy metals concentration, with sequential extraction for total Pb (sum of each fractions) is between 43.473 to 58.123 ppm, whereas for total Cr (sum of total fraction) is between 20.763 ppm to 30,219 ppm. The distribution of Pb in sediments adsorped in carbonate compounds is about 6%, manganese oxides is about 5,5%, iron oxides is about 21,779%, 29,624% in organic compounds and the residual fraction is about 36,879%. The Distribution of Cr in sedimen absorped in carbonate compounds is about 4,183%, in manganese oxides is about 4,325%, in iron oxides ia about 23,713%, 30,827% bound in organic compounds and the residual fraction is about 36,325%.

The results of DGT experiments to study the migration of Pb from sediment into water column in experimental chambers show that for deployment of 1st day in oxic conditions is in the range between 0.0108 ppm to 0.1314 ppm, and 0.042 ppm to 0.081 ppm for the 4th day. Under anoxic condition the results show that the metal concentration on the DGT resin is 2.444 ppm, 0.320 ppm and 3.432 ppm, on the 1st, 3rd and 5th day incubation period respectively. The results for migration of Cr from sediment into water column in experimental chambers show that for deployment time of 1st day incubation oxic conditions is in the range between 0.3431 ppm up to 0.1413 ppm, and 0.0012 ppm to 0.0084 ppm for the 4th day.

Under anoxic conditions the result show that the metal concentration on the DGT resin is 1.5792 ppm, 0.0545 ppm and 2.9629 ppm on the 1st, 3rd, and 5th day incubation period respectively. The Measurements of metal concentration by DGT gel strip in anoxic conditions, show that the distribution of Pb at a depth of 1-5 cm in the range of 0.1279 ppm to 3.1977 ppm, whereas Cr concentration is between 2.6649 ppm levels up to 7.2668 ppm. This results show the availability of heavy metal concentrations in sediment which allow for migration of metals into water bodies."

"Sintesis senyawa Cu2ZnSnS4 menggunakan pelarut etanol memiliki keunggulan dari harga yang relatif murah dan ramah lingkungan. Pada penelitian ini, diamati pengaruh perbedaan substrat soda lime glass dan mo-coated glass terhadap kristalinitas, morfologi, sifat listrik dan sifat optik lapisan tipis Cu2ZnSnS4 hasil deposisi menggunakan metode dip coating dengan pelarut etanol. Hasil uji XRD menunjukkan substrat soda lime glass memiliki kristalinitas lebih tinggi dibanding substrat mo-coated glass. Morfologi lapisan menunjukan terjadinya keretakan pada kedua sampel dan beberapa rongga yang dapat diminimalisir dengan optimalisasi sistem prekursor dan perlakuan termal yang diberikan. Substrat mo-coated glass dapat menurunkan nilai resistivitas pada lapisan tipis Cu2ZnSnS4. Nilai energi celah pita untuk kedua sampel didapatkan sekitar 2,2 eV yang kurang sesuai dikarenakan kehadiran fasa sekunder yang cukup tinggi.

---

The synthesis of Cu2ZnSnS4 compounds using ethanol solvents has the advantage of a relatively cheap and environmentally friendly. In this study, we observed the effect of soda lime glass substrate and molybdenum coated glass substrate the crystallinity, morphology, electrical properties and optical properties of Cu2ZnSnS4 by dip coating with ethanol solvent. The XRD test results showed that the soda lime glass substrate has higher crystallinity than the molybdenum coated glass substrate. The morphology of the coating indicates the presence of cracks in both samples and some cavities that can be minimized by optimizing the precursor system and the thermal treatment. The molybdenum coated glass substrate can decrease the resistivity in the Cu2ZnSnS4 thin film. The band gap energy for both samples was found to be about 2.2 eV which was less suitable due to the presence of a fairly high secondary phase. "

"Akumulasi logam berat pada tanah pertanian terus menjadi isu yang mengkhawatirkan. Salah satu sumber kontaminasi logam berat yang paling umum dapat berasal dari sumber irigasi pertanian yang tercemar, di antaranya logam Pb dan Cr. Kontaminasi logam berat dari sumber irigasi dikhawatirkan dapat terakumulasi di tanah dan tanaman. Kini, pengujian bioavailibiltas logam dalam tanah hingga ke tanaman pangan terus mengalami perkembangan, terlebih lagi pada pengamatan terhadap spesiasi senyawanya menggunakan metode ekstraksi bertahap. Teknik pengukuran sampling logam dilakukan secara in situ dengan metode diffusive gradients in thin films (DGT). Pada penelitian ini dilakukan pengukuran DGT dengan modifikasi pengunaan methylenebisacrylamide (MBA) sebagai crosslinker. Aplikasi DGT dilakukan untuk untuk mengetahui serapan Pb dan Cr pada tanaman Amaranthus hybridus. Berdasarkan hasil penelitian, diperoleh distribusi terbanyak Pb dan Cr pada tanah ada pada fraksi 3 (terikat dengan Fe-Mn) dan fraksi 4 (terikat dengan material organik) dengan kisaran 18,5-25,07% dan 62,95-73,65%. Senyawa MBA dapat digunakan sebagai crosslinker pada membran DGT dengan nilai koefisien difusi Cr 2,7 ×10−6 cm2/s dan Pb 2,15 ×10−6 cm2/s . Akumulasi Pb dan Cr pada A.hybridus terjadi pada bagian akar, batang, dan daun. Akumulasinya juga meningkat seiring dengan penambahan spike di tanah dengan dominansi di akar 0,77-3,01 mg/kg Cr dan 22,73-69,69 mg/kg Pb. Korelasi pengukuran CDGT dengan spike logam pada tanah serta akumulasinya di A.hybridus menunjukkan bahwa DGT dapat menjadi media prediksi serapan Pb dan Cr pada tanaman ini.

---

Accumulation of heavy metals in agricultural soils continues to be a worrying issue. One of the most common sources of heavy metal contamination can come from contaminated agricultural irrigation sources, including Pb and Cr metals. It is feared that heavy metal contamination from irrigation sources can accumulate in soil and plants. Now, testing the bioavailability of metals in the soil to food plants continues to develop, especially in observing the speciation of their compounds using the stepwise extraction method. The metal sampling measurement technique was carried out in situ using the diffusive gradients in thin films (DGT) method. In this study, the measurement of DGT was carried out with the modified use of methylenebisacrylamide (MBA) as a crosslinker. The DGT application was carried out to determine the uptake of Pb and Cr in Amaranthus hybridus plants. Based on the results of the study, the highest distribution of Pb and Cr in the soil was in fraction 3 (bound to Fe-Mn) and fraction 4 (bound to organic matter) with a range of 18.5-25.07% and 62.95-73.65 %. The MBA compound can be used as a crosslinker on DGT membranes with a diffusion coefficient of Cr 2.7 ×10−6 cm2/s and Pb 2.15 ×10−6 cm2/s . Pb and Cr accumulation in A. hybridus occurred in the roots, stems, and leaves. Its accumulation also increased with the addition of spikes in the soil with dominance in the roots of 0.77-3.01 mg/kg Cr and 22.73-69.69 mg/kg Pb. The correlation of CDGT measurements with metal spikes in the soil and its accumulation in A. hybridus showed that DGT could be a predictor of Pb and Cr uptake in this plant."

"Sn/Se/Sn stacked layers were thermally deposited onto glass substrates at subsequent thicknesses of 150/300/150 nm, and were then annealed in a carbon block under running argon gas at 200 C for three hours to form stoichiometric SnSe thin films. The dark electrical resistivity measurements were made using van der pauw method on the samples heated up between 297-443 K. The resistivities of SnSe thin films were found to change with the sample temperature. Essentially, the resistivity decreased exponentially from 1.77 cm to 0.32 cm with an increase of temperature. The corresponding activation energies were 0.11 eV for the 297-373 K range and 0.17 eV for the 373-433 K temperature range, respectively "