Hasil Pencarian  ::  Simpan CSV :: Kembali

"Boron liquid metal ion sources (LMIS) for focused ion beam system have been developed in the form of binary eutectic alloy of Pd73B27. This alloy source was selected as a p-type dopant source. A source life time of more than 120 h has been recorded with different emitter tip radii to test boron ion beam stability. Microstructure examination of the Pd73B27 binary alloy proved that boron LMIS instability was cause primarily by the formation of solid precipitates due to a change in alloy stoichiometry. Auger electron spectroscopy (AES) analysis of boron beam deposited on a flat silicon substrate shows rhenium emitter erosion as well as other elements (Fe, Ni and Cr) resulting from extractor sputtering. Greater attention was paid on the metallurgical aspect of LMIS to develop more reliable boron LMIS.

---

Sumber ion metal cair boron untuk sistem berkas ion terpusat telah dibuat dengan menggunakan paduan biner "eutectic" Pd73B27- Sumber berkas ion dari paduan ini dipilih sebagai sumber dopan jenis p. Masa pakai paduan lebih dari 120 jam telah dicatat dengan percobaan menggunakan berbagai ukuran jari-jari emiter untuk mengukur kestabilan dari berkas ion yang berbasis boron. Penyelidikan terhadap struktur mikro dari paduan biner Pd73B27 membuktikan bahwa ketidak stabilan dari sumber ion metal cair berbasis boron disebabkan oleh pembentukan presipitat padatan. Pembentukan presipitat padatan ini akibat dari perubahan "stoichiometry". Analisa dengan menggunakan spektroskopi Auger dengan cara mendipositkan berkas ion ini pada permukaan lempeng silikon yang rata membuktikan bahwa terjadi erosi emiter yang terbuat dari rhenium dan juga elemen lain akibat dari pengaruh "sputtering" ekstraktor. Perhatian pada penelitian ini ditujukan pada aspek metalurgi dari sumber berkas ion metal cair untuk mengembangkan sumber ion metal cair boron yang dapat diandalkan."

"Stroke is a major cause of death and disability in the U.S. and worldwide. A variety of pathophysiologic episodes or cellular medications occur following a stroke, and knowledge of these aftermath events can lead to potential therapeutic strategies that may reverse or attenuate stroke injury. Cellular events that occur following stroke include the excessive releases of excitatory amino acids, alterations in the genomic responses, mitochondrial injury producing reactive oxygen and nitrogen species (ROS), and secondary injury, often in the setting of reperfusion."

"The book provides a detailed, up-to-date account of the basics, the technology, and the clinical use of ion beams for radiation therapy. Theoretical background, technical components, and patient treatment schemes are delineated by the leading experts that helped to develop this field from a research niche to its current highly sophisticated and powerful clinical treatment level used to the benefit of cancer patients worldwide. This book consists of related chapters. It is a common achievement by 76 experts from around the world. Their expertise reflects the diversity of the field with radiation therapy, medical and accelerator physics, radiobiology, computer science, engineering, and health economics. The book addresses a similarly broad audience ranging from professionals that need to know more about this novel treatment modality or consider to enter the field of ion beam therapy as a researcher. However, it is also written for the interested public and for patients who might want to learn about this treatment option."

"Tahapan proses yang dilakukan untuk pengambilan kembali logam lithium adalah leaching, pembuatan membran emulsi, dan ekstraksi. Limbah baterai Li-Ion dikarakterisasi terlebih dahulu dengan XRD. Hasil XRD menunjukan bahwa terdapat kandungan logam lithium di limbah dalam bentuk LiCoO2. Kondisi optimum untuk proses leaching adalah menggunakan asam sitrat 1,5 M, rasio padatan/cairan: 20 gram/L, dan kecepatan pengadukan 400 rpm pada suhu 550C selama 50 menit dengan hasil 99,3% lithium berhasil ter-leaching. Lalu untuk kondisi optimum proses pembuatan membran emulsi adalah menggunakan 0,03 M Cyanex 921, 8% w/v SPAN 80, 0,05 M H2SO4, rasio volume fasa ekstraktan/fasa internal: 1/1, dan kecepatan pengadukan 1150 rpm selama 60 menit yang mampu menghasilkan membran emulsi dengan tingkat kestabilan diatas 90% setelah 4 jam. Selanjutnya pada proses ekstraksi dengan kondisi optimum pH 6 untuk fasa umpan, rasio volume fasa emulsi/fasa umpan: 1/2, dan kecepatan pengadukan 175 rpm selama 15 menit dengan hasil 63,4% lithium berhasil ter-ekstrak.

---

The process to acquire lithium metal are leaching, creation of emulsion membrane, and extraction. The spent Li-Ion battery was characterized first by XRD. Result of XRD showed that there is lithium in spent battery in the form of LiCoO2. The optimum condition for leaching process is using citric acid 1,5 M, solid/liquid ratio: 20 gram/L, and stirring speed 400 rpm in 550C for 50 minutes with result 99,3% lithium successfully leached. Then the optimum condition to make emulsion membrane is using 0,03 M Cyanex 921, 8% w/v SPAN 80, 0,05 M H2SO4, extractant phase/internal phase volume ratio: 1/1, and stirring speed 1150 rpm for 60 minutes able to produce emulsion membrane with stability level of above 90% after 4 hours. Next in extraction process with optimum condition pH 6 for external phase, emulsion phase/external phase volume ratio: 1/2, and stirring speed 175 rpm for 15 minutes with result 63,4% lithium successfully extracted."

"Penelitian ini bertujuan untuk mengambil kembali logam kobalt dari limbah Lithium Ion Battery (LIB) atau baterai Li-Ion karena pada tahun 2000 kadar mencapai 200-500 ton/tahun dimana kobalt terdapat 30% yang dapat membahayakan lingkungan. Teknologi membran cair emulsi adalah salah satu teknologi rekoveri logam yang sangai baik karena sangat selektif, dapat diaplikasikan dalam skala besar, dan hemat waktu. Tahap awal diperlukan proses leaching menggunakan asam sitrat dengan konsentrasi 1 M menghasilkan kobalt 89,74% dan lithium 46,80% pada suhu 55oC selama 50 menit. Tahap ekstraksi dengan membran cair emulsi dengan ekstraktan (Cyanex 272) konsentrasi 0,05 M dan kadar surfaktan (Span-80) 6% karena angka tersebut menghasilkan emulsi paling stabil. Ekstraksi dilakukan pada suhu ruang dan pengadukan 250 rpm dan menghasilkan ekstraksi 48,73% Co dan 13,06% Li pada pH 5,5. Penelitian ini cukup selektif untuk memisahkan logam Co dan Li.

---

This research has a purpose to recapture cobalt metal from spent Lithium Ion Battery (LIB) or Li-Ion battery because in 2000 the amount of the waste was 200-500 ton/year which contained 30% cobalt that can harm the environment. Emulsion liquid membrane technology is one of the most best technology in metal recovering because highly selective recovery techniques, can be applied on a large scale, and time saving. The initial stage is leaching process is required to use citric acid at a concentration of 1 M to produce cobalt 89,74% and lithium 46,80% at 55oC for 50 minutes. Then, phase extraction with liquid membrane emulsion with the extractant (Cyanex 272) 0,05 M concentrations and levels of surfactants (Span-80) 6% as the figure most stable emulsions in this research. The extraction is done at room temperature and stirring 250 rpm and generates extraction of 48,73% Co and 13,06% Li at pH 5.5. This study was selective enough to separate the metals Co and Li."