Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 188523 dokumen yang sesuai dengan query
cover
Kharisma Zalfa Khairunnisa Nugraha
"Penelitian ini dilakukan untuk mempelajari aktivitas katalitik dari katalis silika-organosilika terfungsionalisasi sulfonat yang disintesis berdasarkan metode sol-gel, pada reaksi esterifikasi antara asam oleat dengan neopentil glikol. Aktivitas katalitiknya dibandingkan dengan empat jenis katalis lain, yaitu katalis SBA-15, SBA-15-PrSO3H dengan dua variasi komposisi, dan Ph-PMO-PrSO3H. Pengujian dilaksanakan pada kondisi reaksi yang sama untuk semua jenis katalis, yaitu dengan rasio molar reaktan neopentil glikol : asam oleat 4:1, suhu reaksi 150 oC, jumlah katalis 3%, dan waktu reaksi selama 120 menit. Hasil dari penelitian didapatkan katalis silika-organosilika terfungsionalisasi sulfonat menghasilkan persen konversi produk yang tertinggi, yaitu 71,09%. Selain itu, dilakukan pula variasi rasio molar reaktan, persen jumlah katalis, dan waktu reaksi untuk mengetahui kondisi optimum reaksi. Didapatkan kondisi optimum dari reaksi adalah rasio molar reaktan neopentil glikol : asam oleat 4:1 dengan jumlah katalis 5% dan waktu reaksi selama 300 menit menghasilkan persen konversi produk 87,14%. Dari pengujian daya daur ulang katalis diketahui bahwa katalis silika-organosilika terfungsionalisasi sulfonat memiliki daya daur ulang yang baik untuk tiga kali reaksi, masing-masing dengan persen konversi asam oleat 87,14%, 87,09%, dan 86,73%. Hal ini juga dikonfirmasi oleh karakterisasi FTIR katalis yang tidak menunjukkan adanya gugus fungsi yang hilang dibandingkan dengan katalis sebelum digunakan di reaksi.

This research was conducted to study the catalytic activity of a sulfonate functionalized silica-organosilicate catalyst synthesized based on the sol-gel method, in the esterification reaction between oleic acid and neopentyl glycol. The catalytic activity was compared to four other types of catalysts, namely SBA-15, SBA-15-PrSO3H with two variations of composition, and Ph-PMO-PrSO3H. The test was carried out under the same reaction conditions for all types of catalysts, namely with a molar ratio of neopentyl glycol reactants: oleic acid 4:1, reaction temperature of 150 oC, amount of catalyst 3%, and reaction time of 120 minutes. The results of the study showed that the sulfonate functionalized silica-organosilica catalyst produced the highest percentage of product conversion, namely 71,09%. In addition, variations in the molar ratio of the reactants, the percent amount of catalyst, and reaction time were also carried out to determine the optimum conditions for the reaction. The optimum conditions for the reaction were the molar ratio of reactants neopentyl glycol : oleic acid 4:1 with 5% catalyst and 300 minutes of reaction time to produce a product conversion percentage of 87,14%. From the catalyst recycling test it was found that the sulfonate functionalized silica-organosilica catalyst had good recyclability for three reactions, with percent oleic acid conversion of 87,14%, 87,09% and 86,73%, respectively. This was also confirmed by the FTIR characterization of the catalyst which did not show any loss of functional groups compared to the catalyst before being used in the reaction."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Regina Putri Amalia
"Kegiatan tambang berskala besar menjadi salah satu penyebab munculnya permasalahan lingkungan, diantaranya adalah pencemaran Air Asam Tambang (AAT). Kota Samarinda yang sebagian besar luas wilayahnya telah beralih fungsi menjadi wilayah kerja pertambangan batubara memiliki lubang bekas galian tambang (void) dan lahan penyumbang asam yang berpotensi menjadi sumber pencemar AAT. Potensi pencemaran AAT di suatu wilayah dapat dikaji dengan memanfaatkan sistem informasi geografis dan penginderaan jauh yang dinilai andal untuk melakukan pengukuran, pemetaan, pemantauan, serta pembuatan model pengelolaan suatu wilayah secara cepat, akurat, dan efektif. Variabel yang digunakan adalah sebaran void, tutupan lahan, jenis tanah, curah hujan, topografi, badan air, dan air tanah. Sebaran void, tutupan lahan, dan badan air didapatkan dari digitasi Google Earth, Jenis tanah didapatkan dari kementerian pertanian, curah hujan didapatkan dari LAPAN, topografi didapatkan dari olahan data ASTER GDEM, serta air tanah didapatkan dari Kementerian ESDM. Integrasi data tutupan lahan, jenis tanah, badan air, curah hujan, dan topografi digunakan untuk menganalisis potensi pencemaran AAT terhadap badan air oleh lahan penyumbang asam, sementara integrasi data sebaran void dan air tanah digunakan untuk menganalisis potensi pencemaran AAT terhadap air tanah oleh void. Metode overlay digunakan untuk menganalisis pola spasial potensi pencemaran AAT di wilayah penelitian. Hasil penelitian menunjukkan potensi pencemaran AAT terhadap badan air didominasi oleh wilayah dengan potensi pencemaran yang tinggi, potensi pencemaran AAT terhadap air tanah didominasi oleh wilayah delineasi sebelah selatan yang mengalirkan AAT ke wilayah akuifer dengan kategori kedalaman rendah dan sedang, sementara pola spasial pencemaran AAT berbentuk random/acak dengan susunan geometris yang berbentuk cluster.

Large-scale mining activities are one of the causes of the emergence of environmental problems, including the Acid Mine Drainage (AMD) Water Pollution. Samarinda City, which has a large area of converted land into a coal mining working area, has voided pits and acid-contributing fields which are potential sources of AMD pollutants. The potential AMD pollution can be assessed by utilizing a geographic information system and remote sensing that consider reliable for measuring, mapping, monitoring, and manage the model making for an area quickly, accurately, and effectively. The variables used are void distribution, land cover, soil type, rainfall, topography, body of water, and groundwater. Void distribution, land cover, and water bodies obtain from Google Earth digitization, soil types obtains from the ministry of agriculture, rainfall obtains from LAPAN, topography obtains from processed data from ASTER GDEM, and groundwater obtains from the Ministry of Energy and Mineral Resources. Integration of land cover data, soil types, water bodies, rainfall, and topography is used to analyze the potential of AMD pollution to water bodies by acid-contributing land, while the void distribution and groundwater integration data is used to analyze the potential of AMD pollution to groundwater by voids. The overlay method is used to analyze the potential spatial patterns of AMD pollution in the study area. The results showed the potential of AMD pollution to water bodies dominated by areas with high pollution potential, the potential of AMD pollution to groundwater-dominated by south delineation area that drain AMD into aquifer areas with low and moderate depth categories, while the spatial pattern of AMD pollution was random with the geometric arrangement in the form of clusters."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Putra Prima Pradipta
"

Air asam tambang sudah menjadi isu yang banyak diangkat oleh para aktivis lingkungan hidup karena kandungan yang ada didalamnya berdampak buruk dan merusak lingkungan serta ekosistem yang berada disekitarnya. Selain itu pengolahan air asam tambang sendiri yang ternyata membutuhkan biaya besar, tenaga yang banyak, dan waktu yang cukup lama. Air asam tambang yang tidak diolah akan membuat nama dari perusahaan pertambangan buruk karena mereka jika tidak memenuhi baku mutu lingkungan, air tersebut akan mencemari lingkungan yang ada. Saat ini fenomena air asam tambang hanya terbatas pada mitigasi dampak, proses pembentukan air asam tambang, dan mengelola air asam tambang menggunakan bahan penetral Namun, air kandungan dalam air asam tambang ternyata bisa dijadikan sebagai sumber energi listrik jika diberi reaksi yang sesuai. Penulis menggunakan air asam tambang dari tambang bijih emas sebagai sampelnya dan air tambang tersebut bisa menghasilkan listrik. Air asam tambang hasil dari tambang bijih emas memiliki pH sekitar 2,1 sampai 2,5. Dengan menerapkan metode elektrokimia, air asam tambang tersebut mengasilkan energi melalui proses dengan menggunakan sel elektrifikasi. Hasil dari pengolahan ini adalah energi listrik dan juga memisahkan mineral-mineral yang terkandung dalam larutan dengan air.


Acid mine drainage has become an issue that has been raised by environmental activists because it contents some negative impacts which damages the environment and ecosystems surround it. In addition, the treatment for neutralize the acid mine water itself require a lot of money, energi, and time. Unprocessed acid mine water will tarnish the mining companies names because if they do not fulfill the environmental quality standards, the water will pollute the environment. However, water content in acid mine drainage turns out to be used as a source of electrical energi if we give the proper treatment or reaction. The author uses acid mine drainage from the gold ore mine as a sample and the mine water can produce electricity. The mine acid water from the gold ore mine has a pH of around 2.1. By applying the electrochemical method, the acid mine drainage produces energi through a process using electrification cells. The results of this process are electrical energi and it also separates the minerals contained in the water. From this process, the author expects mining companies can make this method as an option which will save costs in processing mine acid water waste as well as the results of the energi produced can be used to turn on household electricity in the company. The electrification method for processing acid mine drainage has the potential to become a new method for obtaining water that meets environmental quality standards. Besides that, the metal mineral content dissolved in mine acid water can be extracted again as a useful metal mineral.

"
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Askin Putra Fanela
"Teluk Kendari merupakan salah satu kawasan yang berdekatan dengan pusat kegiatan masyarakat. Kondisi seperti ini akan menyebabkan terjadinya ancaman di sekitar teluk berupa sedimentasi. Sedimentasi yang tinggi pada perairan mengakibatkan meningkatnya konsentrasi total padatan tersuspensi yang berdampak pada terhambatnya penetrasi cahaya pada perairan akibat terhalang oleh partikel sedimen. Sebagai konsekuensinya, tingginya konsentrasi TSS dapat menurunkan tingkat fotosintesis dan akan menurunkan kandungan klorofil-a dalam perairan tersebut. Penelitian ini bertujuan untuk, menganalisis karakteristik sedimen (ukuran butir), menganalisis sebaran total padatan tersuspensi dan klorofil-a serta mensintesa hubungan antara total padatan tersuspensi dengan kandungan klorofil-a. Penelitian ini dilakukan pada bulan januari sampai maret 2018. Metode yang digunakan dalam penelitian ini adalah metode survey dengan mengumpulkan data primer berupa data karakteristik ukuran butir sedimen, konsentrasi total padatan tersuspensi dan kandungan klorofil-a, serta data skunder berupa TSS dan Klorofil-a pada tahun 2010, 2015 dan 2018 yang diambil dari citra satelit Landsat 5 TM dan Landsat 8 OLI. Hasil penelitian ini menunjukkan karakteristik sedimen dengan ukuran butir yang paling halus berada pada wilyah tengah teluk yang dimana pada wilayah itu merupakan wilayah dengan kandungan TSS tertinggi sedangkan yang lebih besar berada pada mulut teluk. Total spadatan tersuspensi berpengaruh terhadap kandungan klorofil-a perairan yang ditunjukkan dengan nilai koefisien determinasi (R2) sebesar 0.79 yang berarti sebesar 79% variable TSS mempengaruhi kandungan klorofil-a.

Kendari Bay is one of areas adjacent to the center of community activities at Southeast Sulawesi. Such conditions will cause a threat around the bay in the form of sedimentation. High sedimentation in the waters resulted in increas of total suspended solid (TSS) concentration. As a light light penetration in the will be low. TSS usually consist of < 2 I¼m. High TSS concentrations can reduce photosynthesis levels and the chlorophyll-a content in waters. This study was aimed to analyse the sediment grain size, the distribution patterns of total suspended solids and chlorophyll-a and tosynthesize the correlations between total suspended solids and chlorophyll-a content. This research was conducted in January to March 2018. The method used in this study was the survey method by collecting primary data such as sediment grain size, total suspended solid concentration and chlorophyll-a content, and secondary data such as TSS and chlorophyll-a in 2010, 2015 and 2018 taken from the image Landsat 5 TM and Landsat 8 OLI satellites. The results of this study indicated that the characteristics of sediments with the finest grain size was in the middle of the bay while the larger ones were at the mouth of the bay which is the region with the highest TSS content. TSS affected the chlorophyll-a content of waters as shown by the coefficient of determination (R2) of 0.79 which means that 79% of the TSS variable affects the chlorophyll-a content."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
T52876
UI - Tesis Membership  Universitas Indonesia Library
cover
Fiqih Arafah Rakhman Kastari
"Tujuan dari penelitian ini adalah mensintesis dan meneliti kemampuan katalitik katalis berbasis material hibrid silika-organosilika terfungsionalisasi sulfonat dengan mereaksikan secara sol-gel, prekursor silika dengan prekursor Periodic Mesoporous Organosillica dan diaplikasikan sebagai katalis reaksi esterifikasi asam lemak bebas dengan gliserol. Material ini berhasil disintesis didukung dengan karakterisasi menggunakan Fourier transform infrared (FT–IR), Field Emission Scanning Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (FESEM-Edx), X–ray diffraction (XRD), dan Surface Area Analyzer (SAA). Untuk meneliti kemampuan katalitik katalis ini, maka dibandingkan dengan kelima jenis katalis lain yaitu SBA-15, SBA-15-PrSO3H dengan tiga macam variasi, dan Ph-PMO-PrSO3H. Dalam membandingkan kemampuan katalitik keenam jenis katalis ini dilakukan reaksi esterifikasi dengan kondisi yang telah ditetapkan, yaitu pada suhu 200oC, waktu reaksi selama 120 menit dengan persen berat katalis sebesar 1%. Didapatkan nilai persen konversi asam terbaik dengan menggunakan material hibrid, dimana didapatkan persen konversi sebesar 34,37%. Kemudian, dengan menggunakan katalis hibrid diselidiki keadaan optimum reaksi (perbandingan molar reaktan, selang waktu dan persen jumlah katalis). Didapatkan kondisi optimum reaksi pada variabel rasio molar reaktan (gliserol: asam oleat) terbaik pada rasio (4:1) dengan yield 34,37%, variasi selang waktu 300 menit menghasilkan yield optimum sebesar 39,23% dan jumlah katalis sebesar 5% berat reaktan yang menghasilkan yield 86,53%.

The purpose of this study was to synthesize and investigate the catalytic ability of a sulfonate functionalized silica-organosilica hybrid based catalyst by reacting sol-gel, silica precursors with Periodic Mesoporous Organosillica precursors and applied as a catalyst for the esterification of free fatty acids with glycerol. This material was successfully synthesized supported by characterization using Fourier transform infrared (FT–IR), Field Emission Scanning Electron Microscopy with Energy Dispersive X-Ray Spectroscopy (FESEM-Edx), X-ray diffraction (XRD), and Surface Area Analyzer (SAA). . To examine the catalytic ability of this catalyst, it was compared with five types of catalysts, namely SBA-15, SBA-15-PrSO3H with three variations, and Ph-PMO-PrSO3H. In comparing the catalytic ability, this type of catalyst was subjected to an esterification reaction with predetermined conditions, namely at a temperature of 200oC, a reaction time of 120 minutes with a catalyst percentage of 1%. The best acid conversion percentage value was obtained using a hybrid material, where the conversion percentage was 34.37%. Then, using a hybrid catalyst provides the optimal reaction state (molar reaction ratio, time lapse and percentage of catalyst). The optimum reaction conditions were obtained at the best reactant (glycerol: oleic acid) molar ratio variable at a ratio (4:1) with a yield of 34.37%, a variation of the time interval of 300 minutes produced an optimum yield of 39.23% and the amount of catalyst was 5% by weight. reactants which yield 86.53% yield."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Atika Oktrima Puspa
"Asam risinoleat merupakan asam lemak utama penyusun minyak jarak yang memiliki aktivitas antimikroba. Pemanfaatan asam risinoleat sebagai antimikroba lebih banyak diteliti dalam bentuk esternya, karena memiliki aktivitas antimikroba yang lebih tinggi. Pada penelitian ini, dilakukan esterifikasi asam lemak hasil hidrolisis minyak jarak kepyar dan asam risinoleat komersial yang telah dioksidasi menggunakan KMnO. Sintesis ester dilakukan dengan mereaksikan produk hasil oksidasi dengan asam asetat, asam laurat, dan asam oleat pada suhu 60o

Ricinoleic acid is the main fatty acid constituent of castor oil which has antimicrobial activity. Research on the use of ricinoleic acid in ester form is more widely carried out, because it has a higher antimicrobial activity. In this study, fatty acid from hydrolysis and commercial ricinoleic acid was oxidized using KMnO4 before it was used for esterification. The ester synthesis was carried out by reacting oxidized products with acetic acid, lauric acid, or oleic acid (3:1) at 60°C for 6 hours using ZnCl2 as catalyst. The ester products were then characterized using FTIR and examined as antimicrobial assay against Staphylococcus epidermidis and Propionibacterium acnes. Emulsifier test was performed to observe the stability and emulsion type, using ester products as emulsifier. FTIR spectra showed a typical absorption band of C-O ester which indicates that oxidized fatty acid from hydrolysis ester and oxidized ricinoleic acid esters had been successfully formed. The antimicrobial activity assay showed positive results against the growth of Propionibacterium acnes and Staphylococcus epidermidis. Oxidized fatty acid from hydrolysis or ricinoleic-lauric ester showed the highest antimicrobial activity against Staphylococcus epidermidis. The emulsifier test showed the stability of six esters up to 24 hours for water-in-oil (w/o) emulsion type."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nabilla Ayu Setyorini
"IPA Teluk Buyung merupakan salah satu instalasi pengolahan air yang belum melakukan pengolahan lanjutan untuk lumpur yang dihasilkan dan langsung dibuang ke badan air terdekat. Lumpur residu dari instalasi pengolahan air memiliki kandungan yang dapat dimanfaatkan kembali seperti Al yang berasal dari proses pembubuhan koagulan. Kandungan Al tersebut dapat dipulihkan dan dimanfaatkan kembali untuk menyisihkan polutan pada air bersih maupun air limbah. Pada penelitian ini dilakukan pemanfaatan lumpur sedimentasi untuk menyisihkan kandungan logam berat pada lindi IPAS 3 TPST Bantargebang. Penelitian ini bertujuan untuk menganalisis potensi pemanfaatan lumpur sedimentasi dalam menyisihkan kandungan logam berat pada lindi serta menganalisis pengaruh metode recovery alum dan dosis koagulan terhadap efektivitas lumpur sedimentasi untuk menyisihkan logam berat pada lindi. Parameter kualitas lindi yang diuji terdiri atas TSS, TDS, salinitas serta logam berat seperti Fe dan Zn. Metode recovery alum yang diuji pada penelitian ini ialah dengan metode kalsinasi serta asidifikasi. Pada penelitian ini terdapat 4 variasi dosis campuran lumpur dengan PAC yakni 100:0, 75:25; 50:50, dan 25:75. Berdasarkan hasil pengujian yang dilakukan, lumpur sedimentasi IPA Teluk Buyung mengandung kadar Al dan Fe sebesar 0,84 mg/L dan 6,04 mg/L. Metode recovery alum dengan hasil yang optimal ialah asidifikasi pada dosis 75:25 yang mampu menyisihkan kandungan Fe sebesar 13,99% dan Zn 22,5%. Namun pada dosis optimum tersebut, konsentrasi dari parameter TSS, TDS, dan salinitas belum mampu disisikan. Pemanfaatan lumpur sedimentasi sebagai campuran koagulan pada penelitian ini masih memiliki potensi yang kecil. Oleh karena itu, perlu dilakukan analisis lebih lanjut untuk menentukan dosis yang lebih optimal dalam menyisihkan kandungan logam berat. 

Teluk Buyung Water Treatment is one of the water treatment plants that have yet to perform further treatment for the sludge produced and directly discharged into the nearest water body. Sludge from water treatment plants has reusable content, such as Al derived from the coagulant affixing process. The Al content can be recovered and reused to reduce pollutants in clean water and wastewater. In this study, sedimentation sludge was used to remove heavy metal content in the leachate from Bantargebang Landfill Waste Water Treatment Plant 3. This study aims to analyze the potential utilization of sedimentation sludge in removing heavy metal content in leachate and the effect of alum recovery methods and coagulant doses on sedimentation sludge's effectiveness in removing heavy metals in leachate. The quality parameters of leachate tested consist of TSS, TDS, salinity, and heavy metals such as Fe and Zn. The alum recovery methods tested in this study are calcination and acidification. In this study, there were 4 variations in the dose of sedimentation sludge mixture with PAC, namely 100:0, 75:25, 50:50, and 25:75. Based on the research conducted, sedimentation sludge from Teluk Buyuk Water Treatment contains 0,84 mg/L and 6,05 mg/L of Al and Fe, respectively. The alum recovery method with the most optimal results is acidification at a dose of 75:25 which is able to removed Fe content of 13.99% and Zn 22.5%. However, at this specific dose, the concentration of TSS, TDS, and salinity parameters has not been able to be removed. The use of sedimentation sludge as a coagulant mixture in this study still has little potential. Therefore, further analysis is needed to determine the optimal dose to reduce heavy metal content in leachate."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Jeannifer Venice Trissa Pertiwi
"Salah satu sumber energi yang sering digunakan sebagai bahan bakar diesel umumnya berasal dari minyak bumi. Minyak bumi merupakan sumber energi yang penting karena memiliki persentase yang signifikan dalam memenuhi konsumsi energi dunia. Namun, sumber energi yang berasal dari minyak bumi ini tidak dapat diperbaharui sehingga jumlahnya bisa menjadi sangat terbatas seiring dengan berjalannya waktu. Dengan adanya informasi mengenai sumber energi yang berasal dari minyak bumi jumlahnya terus mengalami penurunan tersebut, sangat perlu untuk dilakukan upaya pencarian sumber energi alternatif sebagai pengganti bahan bakar diesel yang berasal dari minyak bumi. Pada percobaan ini dilakukan sintesis Biological Metal-Organic Framework (Bio-MOF) berbasis logam Zn, Fe, dan Ni dengan menggunakan metode hidrotermal dan ligan asam glutamat untuk mengonversi asam oleat dan metanol menjadi biodiesel melalui proses reaksi esterifikasi. Hasil MOF yang sudah disintesis kemudian akan dilakukan uji karakterisasi menggunakan FTIR, XRD, BET, dan SEM. Dilakukan uji aktivitas katalitik terhadap ketiga MOF yang sudah berhasil disintesis untuk menentukan berapa massa katalis yang paling optimum untuk memperoleh produk ahkhir biodiesel. Analisis kandungan metil oleat yang terkandung dalam biodiesel tersebut kemudian diuji dengan menggunakan GC-MS.

One common source of energy used as diesel fuel typically originates from petroleum. Petroleum is an important energy source due to its significant percentage in fulfilling the world's energy consumption. However, this petroleum-derived energy source is non-renewable, making its availability potentially very limited over time. Given the ongoing decline in petroleum reserves, it is crucial to seek alternative energy sources to replace petroleum-based diesel fuel. In this experiment, the synthesis of Biological Metal-Organic Frameworks (Bio-MOF) based on Zn, Fe, and Ni metals was carried out using the hydrothermal method and glutamic acid ligands to convert oleic acid and methanol into biodiesel through an esterification reaction process. The synthesized MOFs were then characterized using FTIR, XRD, BET, and SEM. The catalytic activity tests were conducted on the three successfully synthesized MOFs to determine the optimum catalyst mass for obtaining the final biodiesel product. The methyl oleate content in the biodiesel was then analyzed using GC-MS."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Hazim Mu'aafii
"Ketersediaan minyak bumi di dunia semakin menipis serta penggunaan bahan bakar fosil telah menyebabkan pencemaran lingkungan dan pemanasan global. Sehingga diperlukan pengembangan sumber energi terbarukan untuk menjadi subtitusi kebutuhan bahan bakar berbasis minyak bumi. Biodiesel dapat menjadi alternatif bahan bakar. Biodiesel adalah metil ester dapat disintesis melalui esterifikasi asam lemak misalnya adalah asam oleat yang banyak terkandung dalam minyak kelapa sawit. Proses esterifikasi memerlukan katalis asam. MIL-101(Cr) adalah metal organic framework yang tersusun dari logam kromium dan ligan asam tereftalat. MIL-101 (Cr) memiliki luas permukaan BET tinggi dan material ini memiliki potensi situs asam Lewis. Karenanya MIL-101 (Cr) dapat menjadi kandidat yang baik untuk katalis dalam esterifikasi asam lemak seperti asam oleat. Biodiesel juga bisa disintesis melalui transesterifikasi minyak nabati. Sehingga, dilakukan impregnasi logam Nikel pada MIL-101 (Cr) untuk meningkatkan kemampuan katalitiknya. Dalam penelitian ini hasil sintesis katalis MIL-101(Cr) dan Ni@MIL-101 (Cr) dilakukan karakterisasi dengan FTIR, XRD, SEM-EDS dan NH3-TPD. Hasil karakterisasi dapat diketahui struktur MIL-101 (Cr) sudah sesuai dan impregnasi Ni tidak merusak struktur MIL-101 (Cr). Hasil esterifikasi diperoleh untuk MIL-101 (Cr) memiliki persen konversi sebesar 96,06% sedangkan Ni@MIL-101 (Cr) memiliki persen konversi sebesar 12,95%. Untuk melihat metil ester yang terbentuk, hasil esterifikasi diuji GCMS. Dari hasilnya terbukti hampir semua asam lemak dapat terkonversi dengan katalis MIL-101 (Cr), dan masih banyak asam oleat yang belum terkonversi menjadi metil ester dengan katalis Ni@MIL-101 (Cr). Hasil transesterifikasi dengan minyak goreng kelapa sawit dapat dilihat terbentuknya 9-Octadecenoic acid, methyl ester dengan menggunakan katalis Ni@MIL-101 (Cr) dan tidak terbentuk metil ester dari asam oleat pada transesterifikasi menggunakan katalis MIL-101 (Cr).

The availability of fossil fuel in the world is decreasing and the use of fossil fuels has caused environmental pollution and global warming. It is necessary to develop renewable energy sources to replace the need for fossil fuels. Biodiesel can be an alternative fuel. Biodiesel is a methyl ester that can be synthesized through the esterification of fatty acids, for example, oleic acid, which is abundant in palm oil. The esterification process requires an acid catalyst. MIL-101(Cr) is a metal organic framework composed of chromium metal and terephthalic acid ligands. MIL-101(Cr) has a high BET surface area and this material has potential of Lewis acid sites. Therefore MIL-101 (Cr) can be a good candidate for catalyst in the esterification of fatty acids such as oleic acid. Biodiesel can also be synthesized through plant based oil transesterification. Because of that, Nickel metal impregnation was carried out on MIL-101 (Cr) to increase its catalytic ability. In this study the results of the synthesis of MIL-101(Cr) and Ni@MIL-101(Cr) catalysts were characterized by FTIR, XRD, SEM-EDS and NH3-TPD. Based on the characterization results, the MIL-101 (Cr) structure is suitable and the Ni impregnation does not damage the MIL-101 (Cr) structure. The esterification results obtained for MIL-101 (Cr) have a conversion percentage of 96.06% while Ni@MIL-101 (Cr) has a conversion percentage of 12.95%. To see the methyl ester formed, the esterification results were tested by GCMS. The results show that almost all fatty acids can be converted with the MIL-101 (Cr) catalyst, and there is still a lot of oleic acid that has not been converted into methyl esters with the Ni@MIL-101 (Cr) catalyst. The results of transesterification with palm cooking oil can be seen from the formation of 9-Octadecenoic acid, methyl ester using Ni@MIL-101 (Cr) catalyst and no methyl ester from oleic acid in transesterification using MIL-101 (Cr) catalyst."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dika Shofi Roofida Kusriyandra
"Pada penelitian ini dilakukan sintesis ester asam oleat-BHA dan asam oleat-BHT dengan menggunakan reaksi esterifikasi Steglich. Produk yang terbentuk dilakukan pemurnian dengan menggunakan kromatografi kolom. Hasil karakterisasi FTIR asam oleat-BHA menunjukkan serapan dengan munculnya puncak serapan baru yang khas pada ester yaitu C=O pada bilangan gelombang 1738,9 cm-1 dan serapan gugus aromatis pada bilangan gelombang 1442 dan 1457 cm-1. Terbentuknya asam oleat-BHT dibuktikan dengan adanya puncak serapan C=O ester pada bilangan gelombang 1742,2 cm-1 dan puncak serapan gugus aromatis pada bilangan gelombang 1435 dan 1458,9 cm-1. Hasil karakterisasi UV menunjukkan adanya pergeseran hipsokromik produk terhadap BHA dan BHT dan batokromik terhadap asam oleat. Hasil uji toksisitas asam oleat-BHA dan asam oleat-BHT terhadap larva Artemia salina L menunjukkan bahwa ester hasil sintesis tidak toksik yaitu dengan nilai LC50 yaitu 3370,91 (asam oleat-BHA) dan 1209,18 ppm (asam oleat-BHT). Nilai IC50 asam oleat-BHA yaitu 22,61 ppm menunjukkan aktivitas antioksidan yang tinggi dan asam oleat-BHT sebesar 136,42 ppm menunjukkan aktivitas antioksidan yang sedang. Uji antibakteri yang dilakukan menunjukkan bahwa asam oleat-BHA memiliki aktivitas yang lemah terhadap bakteri Escherichia coli dan tidak memiliki aktivitas terhadap Staphyloccocus aureus, sedangkan asam oleat-BHT tidak memilki aktivitas terhadap kedua bakteri tersebut.

In this study, the synthesis of oleic acid-BHA and oleic acid-BHT esters was carried out using the Steglich esterification reaction. The product formed was purified using column chromatography. The results of the FTIR characterization of oleic acid-BHA showed absorption with the appearance of a new absorption peak that was unique to the ester, C=O at a wave number of 1738.9 cm-1 and an absorption peak of an aromatic group at a wave number of 1442 and 1457 cm-1. The formation of oleic acid-BHT was evidenced by the absorption peak of C=O ester at a wave number of 1742.2 cm-1 and an absorption peak of aromatic groups at wave numbers of 1435 and 1458.9 cm-1. The results of UV characterization showed a hypochromic shift of the product towards BHA and BHT and bathochromic to oleic acid. The results of the toxicity test of oleic acid-BHA and oleic acid-BHT on Artemia salina L larvae showed that the ester was non-toxic with LC50 values of 3370.91 ppm (oleic acid-BHA) and 1209.18 ppm (oleic acid-BHT). The IC50 value of oleic acid-BHA which is 22.61 ppm indicated high antioxidant activity and oleic acid-BHT of 136.42 ppm indicated moderate antioxidant activity. The antibacterial test performed showed that oleic acid-BHA had weak activity against Escherichia coli bacteria and no activity against Staphylococcus aureus. While oleic acid-BHT did not have activity against these two bacteria."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>