Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 165438 dokumen yang sesuai dengan query
cover
Sani Suryadarma
"Latar Belakang: Siler saluran akar berfungsi untuk mengisi ruang antara gutaperca dengan dinding saluran akar dan harus bersifat biokompatibel terhadap jaringan periapeks. Siler saluran akar merupakan bahan kimia yang berpotensi menyebabkan mutasi yang dapat dilihat dari ekspresi protein sel tersebut. Tujuan: Mengetahui dan membandingkan potensi mutagenitas siler resin, silikon, dan biokeramik terhadap perubahan ekspresi protein sel limfosit manusia. Metode: Sembilan sampel dari setiap kelompok siler sebanyak 2 ml yang terdiri atas bahan siler dan darah diinkubasi selama 1, 3 dan 7 hari. Kemudian dilakukan isolasi sel limfosit dan pemisahan protein dengan metode elektroforesis. Profil pita protein diobservasi dan data dianalisis secara statistik dengan Kruskal-Wallis dan post-hoc Mann-Whitney. Hasil: Tidak terdapat perbedaan bermakna secara statistik terhadap pembentukan pita protein antara ketiga bahan siler berbahan dasar resin, silikon dan biokeramik. Namun, terdapat perbedaan bermakna antara kelompok siler resin dan silikon pada hari pertama dan ketiga, dan antara kelompok siler silikon dan biokeramik pada hari pertama. Kesimpulan: Terdapat perbedaan potensi mutagenik pada hari pertama, siler resin lebih berpotensi mutagenik diikuti oleh biokeramik kemudian siler silikon. Pada hari ketiga, biokeramik lebih berpotensi mutagenik diikuti oleh resin kemudian silikon. Pada hari ketujuh, biokeramik lebih berpotensi mutagenik diikuti oleh resin dan silikon.
.....Background: Root canal sealers serves to fill the space between the gutta percha and canal wall must be biocompatible with periapical tissue. Root canal sealers are chemicals agent that potentially cause mutations that can be seen from the protein expression of the cells. Objective: To know and compare the potential mutagenicity of resin, silicone, and bioceramic sealers on expression of proteins of human lymphocyte cells. Methods: Nine samples from each group sealer as much as 2 ml of blood are incubated for 1, 3 and 7 days. Then the isolated lymphocytes are observed for protein separation by electrophoresis method. Profile of protein bands observed and data were analyzed statistically by Kruskal-Wallis and post-hoc Mann-Whitney. Results: there is no statistically differences in the formation of protein bands among the resin, silicone and bioceramic sealers. However, there is a statistically differences between the resin and silicone on the first and third, and between silicone and bioceramic on the first day. Conclusion: There were differences in the potential mutagenicity on the first day, resin is more potentially mutagenic followed by bioceramic then silicone. On the third day, bioceramic is more potentially mutagenic followed by resin then silicone. On the seventh day, bioceramic is more potentially mutagenic followed by resin and silicone sealers."
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2018
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Siregar, Irawati
"ABSTRAK
Untuk menciptakan penutupan sistem saluran akar yang adekuat diperlukan bahan siler yang berfungsi untuk mengisi celah diantara gutaperca dan dinding saluran akar.Pada pengisian saluran akar sering ditemukan kondisi siler yang keluar dari foramen sehingga berkontak dengan jaringan periapeks dalam waktu yang berkepanjangan.Untuk itu, salah satu persyaratan dari bahan siler saluran akar adalah harus bersifat biokompatibel terhadap jaringan periradikular.Genotoksisitas adalah salah satu faktor penting yang mempengaruhi biokompatibilitas bahan. Siler saluran akar yang digunakan saat ini merupakan bahan kimia yang dapat mengakibatkan kerusakan pada DNA apabila terpapar dalam waktu yang lama.Terdapat berbagai macam bahan siler seperti siler berbasis Resin, Silikon, atau Bioceramik yang masing-masing memiliki kandungan zat yang berpotensi genotoksik. Tujuan penelitian ini adalah untuk mengetahui dan membandingkan potensi genotoksisitas pada siler berbasis Resin, Silikon, dan Bioceramik terhadap DNA sel limfosit manusia dengan menggunakan uji genotoksisitas ?-H2AX selama 1, 3 dan 7 hari. Berdasarkan hasil penelitian diketahui bahwasiler berbasis Resin, Silikon, dan Bioceramik memiliki potensi genotoksik terhadap DNA sel limfosit manusia dengan nilai tertinggi terdapat pada siler berbasis resin, selanjutnya diikuti oleh siler berbasis Silikon dan Bioceramik.

ABSTRACT
To create an adequate sealing on root canal system, it is requires a sealer that fill the gap between gutta percha and root canal wall. In root canal obturation, it is frequently found that sealer leak to foramen and in contact with periapex tissue in a prolonged time. For that reason, one property that requirement of root canal sealer material is biocompatible to periradicular tissue. Genotoxicity is one of the important factors that affecting the biocompatibility of the material. Root canal sealer used today are chemicals that can cause DNA damage when exposed for long periods of time. There are a wide range of sealers such as Resin based sealer, Silicone based, or Biaceramic based that each have a potentially genotoxic substance. The purpose of this study was to investigate and compare the potential genotoxicity of Resin based Silicone based, and Bioceramic based sealers against human DNA lymphocytes using H2AX assay for 1, 3, and 7 days. Based on the results, it is known that Resin based, Silicone based, and Bioceramic based sealers have genotoxic potential against human DNA lymphocytes with the highest value found in Resin based, followed by Silicone based and Bioceramic based sealers."
2017
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Dewi Isroyati Sugiana
"ABSTRAK
Latar Belakang: Biokeramik dan silikon merupakan material terbaru yang saat ini telah dipasarkan. Untuk melihat perbandingan antara material tersebut dibutuhkan uji sitogenetik dengan menggunakan resin metakrilat. Tujuan: Melihat perbandingan sitogenetik siler berbahan dasar biokeramik, silikon, dan resin metakrilat terhadap limfosit T. Metode: Menilai mikronukleus dalam 1000 sel binukleat yang terbentuk setelah pemaparan siler resin metakrilat, silikon, dan biokeramik terhadap limfosit T pada hari ke 1, 3 dan 7 hari. Hasil: Nilai mikronukleus siler biokeramik dan silikon lebih rendah dari siler resin metakrilat dengan nilai kemaknaan ABSTRACT
Background Bioceramic and Silicone sealer are the latest material that widely commercialized nowadays. Cytogenetic test of bioceramic and silicone sealer need to be verified by testing with methacrylate resin. Purpose To observe cytogenetic of bioceramic, silicone, and methacrylate resin sealer on lymphocyte T. Methods Counting the number of micronuclei after the treats of bioceramic, silicone and metharylate resin sealer on lymphocyte T between 1,3 , adn 7 days. Results Micronuclei score of bioceramic and silicone lower than methacrylate resin with significance value p"
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2017
SP-PDF
UI - Tugas Akhir  Universitas Indonesia Library
cover
Raissa Ardelia Ahimsa
"

Latar Belakang: Siler kalsium silikat bersifat hidrofilik, berikatan secara kimia ke dentin,  membentuk hidroksiapatit, memiliki waktu kerja dan settingideal, dan tidak terjadi penyusutan. Siler resin epoksi yang banyak digunakan saat ini memiliki kekurangan berupa adanya penyusutan saat mengeras. Evaluasi adaptasi siler dapat menentukan kemampuan kerapatan suatu siler. Salah satu metode untuk mengevaluasi kemampuan kerapatan siler adalah dengan Scanning Electron Microscopy (SEM). Tujuan: Menganalisis perbedaan adaptasi siler pada sepertiga tengah dinding saluran akar antara siler berbahan dasar kalsium silikat dengan resin epoksi.Metode: Tiga puluh dua sampel gigi premolar mandibula dibagi menjadi dua kelompok, yaitu kelompok 1: siler resin epoksi dan kelompok 2: siler kalsium silikat. Sampel dipreparasi dan diobturasi dengan siler berbahan dasar kalsium silikat dan resin epoksi. Selanjutnya, gigi dipotong vertikal dan disiapkan untuk analisis adaptasi siler menggunakan SEM. Data tersebut dianalisis secara statistik dengan uji Chi-squareHasil Penelitian: Tidak terdapat perbedaan bermakna antara adaptasi siler kalsium silikat dan resin epoksi secara statistik (p>0.05). Partikel resin epoksi secara keseluruhan tampak berukuran lebih besar dibandingkan dengan kalsium silikat. Kesimpulan: Tidak terdapat perbedaan adaptasi siler secara statistik antara siler berbahan dasar kalsium silikat dengan resin epoksi pada sepertiga tengah dinding saluran akar, namun secara klinis sampel siler kalsium silikat lebih sedikit menunjukkan gap/ celah dan lebih banyak yang berpenetrasi ke dalam tubuli dentin dinding saluran akar.


Background: Calcium silicate sealer is hydrophilic, chemically bonded to dentin, forms hydroxyapatite, has an ideal working and setting time, and does not shrink. The epoxy resin sealer that is widely used today has the disadvantage of shrinkage when hardening. Evaluation of the adaptation of the sealer can determine the sealing ability of a sealer. One of the method for evaluating the sealing ability of a sealer is Scanning Electron Microscopy (SEM). Objective: To analyze differences in the adaptation of sealers in middle third of root canal wall between the calcium silicate and epoxy resin based sealer. Methods: Thirty-two mandibular premolar teeth samples were divided into two groups, that are group 1: epoxy resin sealer and group 2: calcium silicate sealer. Samples were prepared and obturated with calcium silicate and epoxy resin based sealer. Next, the teeth were cut vertically and prepared for analysis of the sealer adaptation using SEM. The data was analyzed statistically by Chi-square test. Results: There was no significant difference between the adaptation of calcium silicate and epoxy resin sealer statistically (p> 0.05). Overall epoxy resin’s particles appear larger than calcium silicate. Conclusion: There was no statistical difference in the adaptation of sealers between calcium silicate and epoxy resin based sealer in middle third of root canal wall, but clinically fewer calcium silicate sealer samples showed gaps and more penetrated into dentinal tubules of root canal wall.

 

"
Depok: Fakultas Kedokteran Gigi Universitas Indonesia , 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Indira Larasputri
"Latar Belakang: Kemampuan adhesi siler terhadap dentin merupakan faktor penting dalam kesuksesan perawatan endodontik. Siler resin epoksi sebagai gold standart memiliki kemampuan adhesi yang superior, tetapi tidak memiliki sifat bioaktif sehingga berkembang siler kalsium silikat. Tujuan: Membandingkan kekuatan push-out bond strength dan failure mode siler AH Plus® Bioceramic dan Ceraseal dengan siler AH Plus®. Metode: Tiga puluh gigi premolar dibagi menjadi tiga kelompok untuk preparasi dan pengisian saluran akar menggunakan siler AH Plus® Bioceramic (kelompok 1), Ceraseal (kelompok 2) dan siler AH Plus® (kelompok 3). Sampel diinkubasi selama tujuh hari pada suhu 37oC, kemudian dipotong pada area sepertiga apikal dan medial. Nilai push-out bond strength dan failure mode dianalisis. Hasil: AH Plus® Bioceramic memiliki perbedaan nilai push-out bond strength dan failure mode yang signifikan dibanding AH Plus® dan Ceraseal. Ceraseal dan AH Plus® tidak memiliki perbedaan nilai secara signifikan. Analisis gambaran failure mode oleh dua orang observer menunjukkan reliabilitas data yang tinggi. AH Plus® Bioceramic memiliki dominasi kegagalan campuran, sedangkan Ceraseal dan AH Plus® memiliki persentasi kegagalan campuran dan kohesif yang seimbang. Kesimpulan: Seluruh kelompok siler menunjukkan kemampuan adhesi yang baik terhadap permukaan dentin, meskipun nilai push-out bond strength siler AH Plus® Bioceramic paling rendah diantara seluruh kelompok.

Background: The adhesion of sealers to dentin is important for successful endodontic treatment. As the gold standard, epoxy resin sealers have superior adhesion, but lack bioactive properties, hence the development of calcium silicate sealers. Objective: To compare the push-out bond strength and failure mode of AH Plus® Bioceramic and Ceraseal sealers with AH Plus® Sealer. Methods: Thirty premolars were divided into three groups for root canal preparation and obturation with AH Plus® Bioceramic (group 1), Ceraseal (group 2), and AH Plus® (group 3). The samples were incubated at 37°C for seven days, then cut at the apical and medial third. Push-out bond strength and failure mode were analyzed. Results: AH Plus® Bioceramic demonstrated significant differences in push-out bond strength and failure mode values compared to AH Plus® and Ceraseal. Ceraseal and AH Plus® were not significantly different. Analysis of failure mode descriptions by two observers showed high data reliability. AH Plus® Bioceramic had a predominance of mixed failures, whereas Ceraseal and AH Plus® had equal percentages of mixed and cohesive failures. Conclusion: All sealer groups showed good adhesion to the dentin surface, although the push-out bond strength value of AH Plus® Bioceramic sealer was the lowest among the groups."
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2023
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Stefani Astari Dewi Aryani
"Latar Belakang: Pengisian saluran akar dengan teknologi terbaru siler premixed kalsium silikat pozolan dengan aktivasi ultrasonik dapat mengurangi porositas pengisian saluran akar. Reaksi pozolan menghasilkan siler dengan daya alir yang lebih baik dengan waktu pengerasan yang lebih cepat, terlebih dengan aktivasi ultrasonik yang akan mengurangi terbentuknya porositas dan meningkatkan kerapatan siler terhadap dinding saluran akar. Tujuan: Menganalisis perbedaan kerapatan siler berbasis kalsium silikat dan siler berbasis kalsium silikat pozolan dengan aktivasi ultrasonik dan tanpa aktivasi ultrasonik terhadap dinding saluran akar. Metode: Evaluasi kerapatan siler berbasis kalsium silikat dan kalsium silikat pozolan dengan aktivasi ultrasonik dan tanpa aktivasi ultrasonik terhadap dinding saluran akar pada 32 gigi premolar rahang bawah yang sudah diekstraksi yang dilihat dari persentase volume porositas pengisian saluran akar menggunakan dengan teknologi 3 dimensi Mikro-CT. Hasil: Siler berbasis kalsium silkat pozolan yang diaktivasi ultrasonik menunjukkan kerapatan siler saluran akar terhadap dinding saluran akar terbaik. Kesimpulan: Kerapatan siler berbasis kalsium silikat pozolan terhadap dinding saluran akar lebih baik dibandingkan siler berbasis kalsium silikat. Kerapatan siler yang diaktivasi ultrasonik terhadap dinding saluran akar juga lebih baik dibandingkan dengan yang tidak diaktivasi ultrasonik.

The latest technology of premixed calcium silicate pozzolan sealer with ultrasonic activation can reduce the porosity of root canal filling. Pozzolan reaction allows the sealer with better flow capacity with faster hardening time, especially with ultrasonic activation which will reduce the formation of porosity and increase sealing ability of root canal filling. Objective: Analyzing differences in sealing ability of calcium silicate-based sealers and calcium silicate pozzolan-based sealers with ultrasonic activation and without ultrasonic activation with 3D Micro-CT analysis. Methods: 32 samples of single rooted lower premolar were given root canal filling using gutta percha and calcium silicate-based sealers and with or without ultrasonic activation. Sealing ability was evaluated by measuring total porosity of the root canal filling. Group 1: calcium silicate-based sealer without ultrasonic activation, group 2: calcium silicate-based sealer with ultrasonic activation, group 3: calcium silicate pozzolan-based sealer without ultrasonic activation, and group 4: calcium silicate pozzolan-based sealer with ultrasonic activation. Result: Ultrasonic activated calcium silicate pozzolan-based showed the best sealing ability with lowest porosity. Conclusion: Calcium silicate pozzolan-based sealers have better sealing ability compared to calcium silicate-based sealers. The ultrasonic activated sealer groups also showed better sealing ability compared to the one that was not activated by ultrasonic."
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2019
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Dwi Wicaksono
"Pendahuluan: Deformitas hidung adalah tampilan klinis yang menonjol pada pasien bibir sumbing unilateral. Rhinoplasty primer adalah solusi terhadap deformitas tersebut. Masalah yang timbul pascaoperasi adalah kecenderungan lower lateral cartilage untuk kembali ke bentuk awal dan timbulnya jaringan parut sehingga timbul kembali deformitas hidung. Solusi yang dapat diambil adalah penggunaan retainer hidung selama minimal 6 bulan untuk mempertahankan bentuk hidung. Hasil yang didapat baik namun retainer hidung yang dijual di pasaran cukup mahal. Untuk mengatasi hal tersebut kami mengajukan alternatif yang lebih terjangkau, aman, dan memiliki karakteristik biomekanik dan biokompatibilitas yang menyerupai retainer hidung yang dijual di pasaran.
Metode: Sampel berasal dari 3 kelompok, yang dibuat oleh institusi kami serta komersial dari Turki (mewakili Kaukasia) dan Taiwan (mewakili Asia). Terdapat 3 sampel setiap kelompok. Setiap sampel diuji biomekanika dengan perangkat uji mekanik dan uji toksisitas untuk karakteristik biokompatibilitas. Parameter yang dinilai adalah modulus elastisitas, tensile strength, toksisitas direk dan indirek. Data dianalisis dengan uji One- Way Anova dan Post Hoc untuk perbedaan rerata antara 3 kelompok.
Hasil: Berdasarkan hasil tensile strength didapatkan nilai p yang signifikan (p <0.05) antara 3 kelompok berdasarkan uji One-Way Anova. Retainer yang kami buat kurang awet. Berdasarkan hasil modulus elastisitas didapatkan nilai p yang signifikan (p <0.05) antara 3 kelompok berdasarkan uji One-Way Anova. Modulus elastisitas pada retainer kami (2.76  0.41 MPa) menyerupai dengan lower lateral cartilage pada manusia (2.09 ± 0.81 MPa). Berdasarkan uji toksisitas direk dan indirek, dapat disimpulkan bahwa ketiga kelompok non toksik.
Kesimpulan: Retainer hidung buatan kami memiliki karakteristik biomekanika yang mirip dengan komersial. Buatan kami ideal karena memiliki modulus elastisitas yang menyerupai dengan lower lateral cartilage pada manusia. Retainer hidung buatan kami memiliki karakteristik biokompatibilitas yang mirip dengan komersial dan non toksik.

Background: Nasal deformity is one of the main features of the unilateral cleft lip. Primary rhinoplasty is currently the solution for nasal deformity. Problem encountered with this technique is a tendency for the lower lateral cartilage to retain its memory and healing of scar tissue, which subsequently recreate the preoperative nasal deformity. To manage this, nasal retainers often employed for at least 6 months to maintain position of the nose. The results are promising; however commercial nasal retainers made from silicone are quite expensive. To address this issue we propose an alternative nasal retainer that is affordable, safe, and have similar biomechanical and biocompatibility properties with silicone used in nasal retainers.
Methods: Samples are from 3 groups, our self-made nasal retainers, commercial nasal retainers from Turkey (represent Caucasian) and Taiwan (represent Asian). There are 3 samples of each nasal retainer group. Each samples were tested using mechanical testing device for biomechanical properties and toxicity testing for biocompatibility properties. Elasticity modulus, tensile strength, direct and indirect toxicity were recorded. Data were analysed using One-Way Anova and Post Hoc test for mean difference of three groups. Results: Based on tensile strength results, overall p value has significant mean differences (p <0.05) between three groups based on One-Way Anova test. Our nasal retainer is least durable. Based on elastic modulus results, overall p value has significant mean differences (p <0.05) between three groups based on one-way Anova test. Our nasal retainer shows similar elastic modulus (2.76  0.41 MPa) compared to human lower lateral cartilage elastic modulus (2.09 ± 0.81 MPa). Based on direct and indirect toxicity testing, we can conclude that three sample groups are non-toxic.
Conclusion: Our nasal retainer has similar mechanical properties with commercially available silicone nasal retainer. Our nasal retainer is ideal because it shows similar elastic modulus compared to human lower lateral cartilage. Our nasal retainer has similar biocompatibility with commercially available silicone nasal retainer and it is non-toxic.
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Ilham Khalid
"Pendahuluan : Debonding dan permbersihan sisa bahan adesif setelah perawatan ortodonti cekat menyebabkan permukaan email menjadi kasar. Peningkatan kekasaran permukaan email memudahkan akumulasi plak yang dapat menyebabkan demineralisasi email. Tujuan: Menganalisis perubahan kekasaran permukaan email pasca debonding setelah aplikasi bahan infiltrasi resin, bahan pelapis nano resin, dan kombinasi bahan infiltrasi resin dengan bahan pelapis nano resin serta menganalisis perbedaan perubahan kekasaran permukaan email ketiga kelompok tersebut. Material dan Metode : 30 buah gigi premolar digunakan sebagai spesimen penelitian. Setiap spesimen direkatkan braket standard Edgewise premolar di bagian bukal mahkota gigi, lalu direndam dalam aquades selama 24 jam. Selanjutnya dilakukan proses debonding braket dan sisa bahan adesif dibersihkan menggunakan dome tapered tungsten carbide bur highspeed 30.000rpm. Spesimen dibagi menjadi 3 kelompok perlakuan n= 10 , yaitu : R aplikasi bahan infiltrasi resin; N aplikasi bahan pelapis nano resin; RN aplikasi bahan infiltrasi resin bahan pelapis nano resin. Kekasaran permukaan email diukur menggunakan alat Surface Roughness Tester merk Mitutoyo SJ-301 saat sebelum perlakuan dan setelah perlakuan. Hasil : Terdapat perubahan kekasaran permukaan email pasca debonding yang bermakna setelah aplikasi bahan seluruh kelompok. Perbedaan perubahan kekasaran permukaan email pasca debonding paling besar terjadi pada kelompok RN aplikasi bahan infiltrasi resin bahan pelapis nano resin Kesimpulan : Aplikasi bahan infiltrasi resin bahan pelapis nano resin merupakan metode yang paling efektif untuk menurunkan kekasaran permukaan email pasca debonding dibandingkan aplikasi bahan infiltrasi resin atau bahan pelapis nano resin saja.

Background Debonding and removal of adhesive remnants after orthodontic treatment will increase the surface roughness of enamel, This condition promotes plaque accumulation which leads to enamel demineralization. Objective Analyzing surface roughness changes of enamel after debonding using resin infiltration system, nano filled resin coating, and the combination of both materials. We also analyze the differences in surface roughness changes of enamel between the three groups. Material and Method 30 extracted upper first premolar tooth specimens were bonded with standard Edgewise bracket and stored in distilled water for 24 hours. Then the brackets were debonded, and adhesive remnants were removed using highspeed dome tapered tungsten carbide bur at 30.000rpm. Afterwards, each specimen was randomly assigned into one of the three treatment groups n 10 , which were R resin infiltration system N nano filled resin coating RN A combination of resin infiltration system nanofilled resin coating. The surface roughness of enamel was measured using Mitutoyo SJ 301 Surface Roughness Tester before and after the treatment."
[Jakarta, ]: Fakultas Kedokteran Gigi Universitas Indonesia, 2017
SP-PDF
UI - Tugas Akhir  Universitas Indonesia Library
cover
Swesty Mahardhini
"Latar Belakang: Penggunaan bahan semen (siler) saluran akar dengan kandungan dan karakteristik berbeda diduga dapat memengaruhi retensi pasak fiber terhadap dinding saluran akar pasca perawatan endodontik. Tujuan : Mengetahui perbedaan kekuatan adhesi pasak fiber pada perawatan saluran akar yang menggunakan siler berbasis resin epoksi dan kalsium silikat. Metode: 30 gigi premolar bawah akar tunggal didekoronasi, dilakukan preparasi saluran akar, lalu dibagi menjadi 3 kelompok; Kelompok 1 (kontrol): gigi tanpa pengisian saluran akar, Kelompok 2: gigi yang menggunakan siler resin epoksi (AH-Plus), dan Kelompok 3: gigi yang menggunakan siler berbasis kalsium silikat (Ceraseal). Setelah pengisian saluran akar, preparasi, dan pemasangan pasak fiber. Selanjutnya gigi dipotong pada area sepertiga tengah akar setebal 2 mm kemudian dilakukan uji push-out bond strength menggunakan Universal Testing Machine. Data dianalisis dengan tes One-way Anova dan post hoc Bonferroni. Hasil: Terdapat perbedaan bermakna nilai push-out bond strength antar kelompok semen resin resin epoksi dan kalsium silikat. Kesimpulan: Gigi yang melalui perawatan saluran akar menggunakan siler resin epoksi memberikan kekuatan adhesi pasak fiber yang lebih baik dibandingkan gigi yang menggunakan siler kalsium silikat.

Background: The use of root canal sealers with different composition and characteristics is thought to effect the retention of fiber post in root canal walls after endodontic treatment. Objective: To evaluate the difference of the fiber post adhesion strength after endodontic treatment using epoxy resin and calcium silicate based root canal sealer. Methods: 30 samples of single-rooted lower premolar were decoronated, got the root canal prepared, then divided into 3 groups; Group 1 (the controls): samples without root canal filling, Group 2 and 3, the canals were filled with gutta percha using epoxy resin (AH-Plus), and calcium silicate (Ceraseal)-based root canal sealer. After root canal obturation, the gutta percha were partly removed, prepared for post space, and then cemented with the fiber posts. Then 2 mm thick disk were cut from the middle root section and subjected to a push-out bond strength test. Data were analysed using the one-way ANOVA and post hoc Bonferroni test. Result: There was a significant difference in the push-out bond strength value between the epoxy resin and calcium silicate-based root canal sealer groups. Conclusion: The endodontic treated tooth previously using epoxy resin root canal sealer gave better fiber post adhesion strength compared to tooth that used calcium silicate based root canal sealer."
Depok: Fakultas Kedokteran Gigi Universitas Indonesia, 2020
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Erly Arkasan Dzahwan
"Indonesia memiliki potensi besar dalam memproduksi silikon karena memiliki deposit pasir silika yang melimpah di seluruh wilayahnya. Belum ada industri di Indonesia yang mampu mereduksi silika menjadi silikon. Hingga saat ini metode yang umum digunakan untuk mereduksi pasir silika menjadi silikon adalah dengan menggunakan metode karbotermik. Alternatif metode reduksi yang dapat digunakan di antaranya adalah metode reduksi magnesiotermik yang mampu menurunkan kebutuhan temperatur menjadi pada kisaran 500-950℃. Metode ini dilakukan dengan mereaksikan pasir silika (SiO2) dengan magnesium (Mg) pada temperatur terkontrol. Penelitian ini dilakukan dengan melakukan magnesiotermik terhadap sampel Mg-Si dalam bentuk serbuk padat dalam tungku selama 4 jam dan variasi temperatur 600℃, 700℃, dan 800℃. Sampel hasil pembakaran kemudian dilakukan pelindian menggunakan larutan HCl 6M di atas magnetic stirrer dengan kecepatan 650rpm dan suhu 80℃ selama 4 jam. Hasil pelindian kemudian disaring dan sampel dikarakterisasi menggunakan XRD, XRF, dan SEM-EDS. Data XRF yang menunjukkan adanya keberadaan silikon dalam sampel akhir mengindikasikan berhasilnya proses reduksi. Karakterisasi XRD pada sampel akhir menunjukkan kadar silikon dan bahwa temperatur optimum untuk mereduksi pasir silika adalah 600℃ dengan silikon 65,3%. Kemudian dengan didukung pengujian SEM-EDS, variabel temperatur 600℃ memiliki kehalusan lebih tinggi dan tingkat homogenitas tertinggi secara visual dibandingkan dengan hasil mikrostruktur sampel lainnya.

Indonesia has great potential in silicon production due to abundant deposits of silica sand throughout the country. However, the processing of silica sand into silicon for solar cell applications is still rare in Indonesia due to the high energy requirement of the process. Currently, the most common method used to reduce silica sand into silicon is the carbothermic method. An alternative reduction method that can be used is the magnesiothermic reduction method, which can significantly lower the temperature required to the range of 500-950°C. This method involves the reaction of silica sand (SiO2) with magnesium (Mg) at controlled temperatures. This research focuses on conducting magnesiothermic reduction on Mg-Si samples in the form of solid powder in a furnace for 4 hours at various temperatures of 600°C, 700°C, and 800°C. The resulting burned samples are then subjected to leaching using a 6M HCl solution with the assistance of a magnetic stirrer operating at 650 rpm and a temperature of 80°C for 4 hours. The leached samples are subsequently filtered and characterized using XRD, XRF, and SEM-EDS techniques. The XRF data indicates the presence of silicon in the final sample, indicating the success of the reduction process. XRD characterization of the final sample reveals the silicon content, and the optimum temperature for reducing silica sand is found to be 600°C silicon content of 65.3%. Supported by SEM-EDS analysis, the 600°C temperature variable exhibits higher fineness and the highest level of visual homogeneity compared to other sample microstructures."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>