Dalam industri minyak dan gas, korosi yang diakibatkan oleh karbon dioksida masih menjadi tantangan yang besar yang dapat menyebabkan kegagalan material. Penelitian ini menggunakan salah satu turunan dari senyawa piridin sebagai inhibitor yang dapat ditambahkan ke dalam sistem perpipaan untuk mengurangi laju korosi. Piridin ini diteliti dengan variasi konsentrasi, yaitu 25 ppm, 50 ppm, dan 75 ppm, serta variasi temepratur, yaitu 40° dan 90°C. Pengujian Fourier Transform Infrared Spectroscopy (FTIR) dan Gas Chromatography – Mass Spectrometry (GCMS) dilakukan untuk mengkarakterisasi inhibitor, dimana ditemukan bahwa inhibitor ini memiliki molekul dengan heteroatom nitrogen yang dapat memfasilitasi proses adsorpsi. Efisiensi inhibisi korosi juga diukur menggunakan metode polarisasi linear dan Electrochemical Impedance Spectroscopy (EIS), dimana ditemukan bahwa laju korosi menurun dengan meningkatnya konsentrasi inhibitor dan meningkat dengan meningkatnya temperatur. Data dari pengujian elektrokimia juga digunakan untuk menentukan model adsorpsi isoterm dan tipe adsorpsi, dimana ditemukan bahwa model adsorpsi yang didapat adalah adsorpsi isoterm Langmuir dengan tipe adsorpsi campuran fisika dan kimia. Morfologi permukaan sampel juga diteliti menggunakan Scanning Electron Microscopy (SEM) dan Energy Dispersive X-Ray (EDX) dan hasilnya menunjukkan bahwa sebelum diberikan inhibitor, produk korosi mendominasi permukaan dan jumlahnya menurun secara drastis setelah inhibitor diberikan, menandakan bahwa inhibitor ini telah sukses untuk menurunkan laju korosi baja karbon pada lingkungan CO2.
In oil and gas industry, corrosion caused by carbon dioxide is one of the greatest challenges that could lead to material failure. This research uses a derivative of pyridine as an inhibitor that can be added to the piping system to reduce the rate of corrosion. Pyridine was examined with variations in concentration, namely 25 ppm, 50 ppm, and 75 ppm, as well as variations in temperature, namely 40° and 90°C. Fourier Transform Infrared Spectroscopy (FTIR) and Gas Chromatography - Mass Spectrometry (GCMS) tests were performed to characterize the inhibitors, which found that these inhibitors have molecules with nitrogen heteroatoms that can facilitate the adsorption process. The efficiency of corrosion inhibition was also measured using the potentiodynamic polarization method and Electrochemical Impedance Spectroscopy (EIS), which found that the corrosion rate decreased with increasing inhibitor concentration up to an optimal concentration of 50 ppm and increased with increasing temperature. The data from electrochemical testing was also used to determine the adsorption model of the isotherm and the type of adsorption, and it was found that the adsorption in this system obeyed Langmuir isotherm adsorption and is governed by a mixture of physical and chemical type. The surface morphology of the samples was also investigated using Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray (EDS) and the results showed that before injected with inhibitors, corrosion products dominated the surface and the amount decreased dramatically after the inhibitor was given, indicating that this inhibitor was successful to reduce the rate of carbon steel corrosion in the CO2 environment.
"Kebutuhan energi dunia yang meningkat setiap tahunnya dan persediaan bahan bakar fosil yang semakin menipis membuat kebutuhan akan bahan bakar alternatif yang dapat memenuhi kebutuhan energi tersebut. Pemerintah Indonesia melalui Peraturan Menteri telah menetapkan penggunaan biofuel di Indonesia sebagai campuran bahan bakar minyak. Tingkat campuran Biodiesel (B100) sebagai campuran bahan bakar minyak yang ditetapkan oleh pemerintah sebesar 15 persen untuk tahun 2015, 20 persen untuk tahun 2016, dan 30 persen untuk tahun 2020. Salah satu permasalahan utama yang terjadi dalam penggunaan biodiesel adalah kestabilan kualitas bahan bakar selama masa penyimpanan. Beberapa faktor yang berpengaruh terhadap kualitas biodiesel selama masa penyimpanan adalah kondisi penyimpanan dan waktu penyimpanan. Tujuan dari penelitian ini adalah untuk mengetahui pengaruh kondisi penyimpanan terhadap karakteristik bahan bakar yang terkait dengan kestabilan kualitasnya selama periode penyimpanan yang ditetapkan. Kondisi penyimpanan yang digunakan pada penelitian kali ini adalah penyimpanan di dalam tangki berbahan stainless steel. Variasi kondisi penyimpanan adalah: (1) Relative Humidity (RH) Rendah, (2) RH Sedang, dan (3) RH Tinggi. Karakteristik yang diamati adalah angka asam (TAN), kadar air, dan stabilitas oksidasi yang diukur setiap 1 bulan. Hasil yang diperoleh menunjukkan bahwa dalam waktu 3 bulan terjadi penurunan stabilitas oksidasi pada ketiga variasi yang disertai dengan kenaikan angka asam dan kadar air yang disebabkan oleh pengaruh temperatur.
The world's energy needs are increasing every year and the stock of fossil fuels is increasingly depleting making the need for alternative fuels to fulfill those energy needs. The government of Indonesia through a Ministerial Regulation that regulates the use of biofuels in Indonesia as a mixture of fuel oil. The Biodiesel blend level (B100) as a fuel oil mixture set by the government is 15 percent for 2015, 20 percent for 2016, and 30 percent for 2020. One of the main problem associated with the use of biodiesel is the stability of the quality of the fuel during storage period. Several factors that has an effect to the quality of biodiesel during the storage period are storage condition and storage time. The purpose of this research is to study the effect of storage condition on fuel properties related to the stability of its quality during the specified storage period. Storage used in this study is storage in tanks made of stainless steel. Storage conditions variations are: (1) Relative Humidity (RH) Low, (2) Medium RH, and (3) High RH. The properties observed were total acid number (TAN), water content, and oxidation stability that were tested every 1 month. The results obtained indicate that within 3 months there was a decrease in oxidation stability for every variations that followerd with an increase in total acid number and water content caused by the influence of temperature.
"