Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 39 dokumen yang sesuai dengan query
cover
Abstrak :
Combustion engines development nowadays is based on simulation, not only of the transient reaction of vehicles or of the complete driveshaft, but also of the highly unsteady processes in the carburation process and the combustion chamber of an engine. Different physical and chemical approaches are described to show the potentials and limits of the models used for simulation.
Berlin: [, Springer], 2012
e20418273
eBooks  Universitas Indonesia Library
cover
Bambang Sugiarto
Jakarta: UI-Press, 2007
PGB 0423
UI - Pidato  Universitas Indonesia Library
cover
Maurya, Rakesh Kumar
Abstrak :
This book deals with in-cylinder pressure measurement and its post-processing for combustion quality analysis of conventional and advanced reciprocating engines. It offers insight into knocking and combustion stability analysis techniques and algorithms in SI, CI, and LTC engines, and places special emphasis on the digital signal processing of in-cylinder pressure signal for online and offline applications. The text gives a detailed description on sensors for combustion measurement, data acquisition, and methods for estimation of performance and combustion parameters. The information provided in this book enhances readers basic knowledge of engine combustion diagnostics and serves as a comprehensive, ready reference for a broad audience including graduate students, course instructors, researchers, and practicing engineers in the automotive, oil and other industries concerned with internal combustion engines. Maximizes readers understanding of the construction, working principles, installation, signal processing and limitations of the transducers used for combustion analysis; Provides a range of different models for estimating heat release and heat transfer for combustion quality analysis; Describes statistical and chaotic methods used for combustion stability analysis and the different knock indices and combustion noise metrics evaluated from cylinder pressure signal; Reinforces concepts presented with end of chapter summary discussions and questions; Explains methods used for estimation of engine parameters such as TDC, compression ratio, air-fuel ratio, residual gas fraction and wall temperature using in-cylinder pressure measurement.
Switzerland: Springer Nature, 2019
e20509892
eBooks  Universitas Indonesia Library
cover
Bagus Anang Nugroho
Abstrak :
Proses yang sebenarnya terjadi di dalam silinder merupakan proses yang sangat rumit dimana melibatkan aliran fluida, pembakaran, kerja dan perpindahan panas. Pada penerapan numerik beberapa idealisasi yang dilakukan disesuaikan dengan tujuan Komputasi. Komputasi motor bakar diesel seringkali menggunakan pendekatan siklus ideal, fluida kerja udara saja dan juga mengabaikan pengaruh saat injeksi dan perpindahan panas. Pada tesis ini dicoba dilakukan pembuatan Komputasi dengan 12 fluida kerja dimana efek saat injeksi dan perpindahan panas tidak diabaikan, sementara siklus ideal diperbaiki pada langkah pembakaran berdasar diagram tekanan silinder eksperimen dan dilakukan aplikasi analisa pelepasan panas. Komputasi ini dibuat untuk memberi informasi parameter lain yang seringkali sulit diperoleh secara eksperimen. Kehatihatian perlu dilakukan dalam mengaplikasikan model yang tersedia dalam program Komputasi. Beberapa model perpindahan panas yang ada dicoba diaplikasikan dan dibandingkan akurasinya. Prinsip Komputasi yang dilakukan adalah menganggap salah satu parameter diantara tekanan, temperatur, atau mol dianggap konstan dan selanjutnya parameter lain dengan metoda secant dapat diketahui besarnya. Pada proses hisap dan buang dianggap tekanan konstan, sedangkan pada proses yang lain (tekan, bakar, usaha) dianggap komposisi tidak berubah (mol konstan). Hasil Komputasi menunjukkan bahwa prediksi diagram P-O memiliki penyimpangan cukup kecil bila diketahui laju masa terbakarnya. Aplikasi untuk mengetahui trend gas buang fungsi waktu injeksi dan ekuivalen rasio dapat dilakukan dengan Komputasi ini.
Depok: Fakultas Teknik Universitas Indonesia, 2002
T5121
UI - Tesis Membership  Universitas Indonesia Library
cover
Maha Willy Chandra
Abstrak :
Mesin otto empat langkah pada umumnya memiliki konfigurasi bore dan stroke yang hampir sama atau square.Walaupun lebih dominan memiliki langkah (stroke) yang lebih besar. Hal tersebut bertujuan agar torsi yang dimiliki mesin tersebut lebih cepat didapat disaat rotasi atau putaran mesin tidak terlalu tinggi. Dengan torsi yang didapatkan lebih cepat disaat putaran mesin yang tidak terlalu tinggi ini, diharapkan konsumsi bahan bakar yang dibutuhkan tidak terlalu banyak. Agar tercapainya tujuan tersebut yang disesuaikan dengan kebutuhan atau bobot yang akan diterima oleh mesin tersebut, maka didesain mesin otto empat langkah yang berkapasitas 65cc. Digunakannya kapasitas sebesar itu karena bobot kendaraan yang akan ditopangnya sebesar 90kg termasuk pengendaranya. Pengembangan mesin otto empat langkah berkapasitas 65 cc meliputi perancangan crankshaft dengan nilai von Mises stress sebesar 65,6 MPa dan pengukuran data performa mesin. Torsi maksimum yang terukur adalah sebesar 5,7 Nm pada 2500 RPM dan daya maksimum yang terukur adalah 1.47 kW pada 2500 RPM. ...... In the four-stroke engine is now widely circulated in the market, especially motorcycles has bore and stroke configuration is almost the same or square. Although it has a more dominant stroke is greater. It is intended that the engine torque owned more quickly gained when rotation or engine speed is not too high. Torque is obtained more quickly when the engine speed is not too high, the expected consumption of fuel needed is not too much. In order to achieve these objectives are adjusted to the needs or weight that will be accepted by the machine, otto four-stroke engine was designed with a capacity of 65cc. The use of capacity for it because of the weight of the vehicle which will handle of 90kg including the rider. Maximum torque of the engine is 5.7 Nm at 2600 RPM and the maximum power of the engine is 1,47 kW at 2500 RPM.
Depok: Fakultas Teknik Universitas Indonesia, 2016
S64838
UI - Skripsi Membership  Universitas Indonesia Library
cover
Afif Irfin
Abstrak :
Pada penelitian ini, pengukuran waktu evaporasi dari biodiesel B30 FAME grade Export dan FAME grade SNI dilakukan dengan metode tetes plat panas untuk mengetahui karakteristik dan waktu evaporasi pada masing-masing variasi bahan bakar. Penelitian dilakukan dengan proses deposisi dan evaporasi bahan bakar Diesel yang dilakukan secara berulang pada sebuah pelat panas. Pelat dipanaskan dengan variasi temperatur di dalam ruang tertutup, sehingga kondisinya hampir menyerupai kondisi pada titik-titik penting dalam sebuah mesin pembakaran dalam pada umumnya. Pengujian ini menggunakan hot temperature test rig yang masing masing variasi memiliki temperatur berbeda. Penggunaan bahan bakar jenis dengan komposisi bahan bakar diesel 70% dan komponen biokimia 30% ini sebagai riset yang mendukung permintaan pemerintah dalam Peraturan Menteri Energi dan SDM mengenai kebijakan membentuk biofuel 30% dalam mandat konsumsi energi nasional pada tahun 2025. Penelitian ini bertujuan untuk mengetahui waktu evaporasi dari variasi bahan bakar dan temperatur yang optimal agar proses pelepasan deposit dapat dipercepat. ......In this study, the measurement of evaporation time from biodiesel B30 FAME with Export grade and FAME with SNI grade was carried out using the hot plate drop method to determine the characteristics and timing of evaporation in each variation of fuel. The research was done by Diesel fuel deposition and evaporation process that had been done repeatedly on a hot plate. The plate is heated with temperature variations in a closed space, simulating the condition to the condition of a common internal combustion engines crucial spot. This test used a hot chamber test rig which variations used different temperature. The use of type fuel with a composition of 70% diesel fuel and 30% biochemical component is a research that supports the government's request in the Minister of Energy and Human Resources Regulation regarding policies to set up 30% biofuel in the mandate of national energy consumption by 2025. This study aims to determine the time evaporation from the fuel variations and optimal temperature so that the deposit release process can be accelerated.
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Weathers, Tom
Reston, VA: Reston Publishing, , 1983
621.434 WEA f
Buku Teks  Universitas Indonesia Library
cover
Petrovsky, N.
Moscow: MIR Publisher, 196-
628.872 3 PET m
Buku Teks  Universitas Indonesia Library
cover
Abstrak :
The aim of this research is to minimixe the effect of air pollution by reducing gas emission which is exhausted by the vehicle. The effort is taken by modifying the ignition system of the existing standard by using a distributorless ignition system. The modification is conducted by changing the distributor function which now becomes a trigger in the ignition unit. The examination is done on SJ-410 type engine. It is one of the engine type which has most populations. The engine type is used in Suzuki Carry and Suzuki Katana. The examination is done at the rotating speed variations of 750, 1000, 1500, 2000, 2500, 3000, and 3500 rpm. The exhaust gas emission measurement is conducted by using Infrared gas analyser: Protech Flux 5000 srl. The result of the research indicates that the distributorless system reduces the emission of SJ-410 engine type. It is caused by more perfect combustion of fuel and air, furthermore the perfect combustion causes the decrease of HC and CO gas of the exhaust.
MTUGM 30:4 (2008)
Artikel Jurnal  Universitas Indonesia Library
cover
Abstrak :
Sumber energi yang disediakan oleh alam sangat banyak sehingga dapat digunakan manusia untuk kelangsungan hidupnya. Sejak dahulu sampai saat ini telah dilakulcan berbagai penelitian oieh para ilmuwan dari mancancgara mengenai energi. Salah S8111 gagasan yang selalu digunakan sebagai pedoman adalah bahwa energi itu tetap lestari. Memanfaatkan energi semaksimal mungkin dengan cara mengubahnya menjadi bentuk energi lain menxpakan prinsip konversi energi. Pennasalahan tersebut diataslah yang akan dibahas dalam tugas akhir ini.

Motor bakar torak adalah salah satu penggerak mula yang mengkonversi energi kimia bahan bakar menjadi tenaga atau daya. Daya yang berasal dari pembakamn bahan bakar dan udara didalam silinder inilah yang kemudian dikonversi menjadi energi mekanik untuk menggcrakkan suatu peralatan.

Seperti diketahui bahwa daya dari suatu motor bakar sangat tergantung dengan massa udara dan kuantitas bahan bakar yang tersedia dengan kata lain sangat tergantung dengan mean ejécrhfe pressure (mep) atau tekanan efektif rata-rata dari motor bakar tersebut.

Menambah daya suatu motor bakar tanpa mengubah volume langkah dan kecepatan motor dapat dilakukan dengan meningkatkan mep motor tersebut. Ha! ini dapat dilakukan dengan penambahan turbocharger dan afercooler.
Fakultas Teknik Universitas Indonesia, 1999
S37405
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4   >>