Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 6 dokumen yang sesuai dengan query
cover
Rahma Indria Anindita
Abstrak :
Pemutihan gigi dilakukan untuk gigi yang mengalami diskolorasi menggunakan hidrogen peroksida. Salah satu teknik dalam pemutihan gigi adalah at-home bleaching. Aplikasi bahan pemutih gigi juga dapat dilakukan pada gigi yang telah ditumpat dengan resin komposit. Tujuan dari penelitian ini adalah mengetahui pengaruh lama aplikasi bahan pemutih gigi hidrogen peroksida 6% terhadap kekerasan resin komposit hibrid. Penelitian ini menggunakan 30 spesimen yang dibagi menjadi 3 kelompok, yaitu 10 spesimen kontrol, 10 spesimen yang diaplikasi bahan pemutih gigi selama 4 jam dan 10 spesimen yang diaplikasi bahan pemutih gigi selama 8 jam. Aplikasi bahan pemutih gigi dilakukan selama 4 hari. Pengukuran kekerasan dilakukan per hari menggunakan Knoop Microhardness Tester. Hasil dari penelitian ini menunjukkan perbedaan penurunan kekerasan berdasarkan lama aplikasi bahan pemutih gigi. Namun tidak terdapat perbedaan penurunan kekerasan bermakna dibandingkan dengan kelompok kontrol. Dengan demikian dapat disimpulkan bahwa bahan pemutih gigi hidrogen peroksida 6% dapat digunakan pada pasien dengan tumpatan resin komposit hibrid dengan aplikasi 4 jam selama 1 hari.
Dental bleaching is one of treatment for discoloured teeth using hydrogen peroxide. One of dental bleaching method is at-home bleaching. Application of bleaching agent is also applied on the tooth that has been restorated with dental composite resin. The purpose of this research is to analyse the effect of different time of 6% hydrogen peroxide application to the surface hardness of hybrid composite resin. In this research 30 specimens hybrid composite resin were divided into 3 groups of specimen. These are 10 specimens as control group, 10 specimens applied with bleaching agent for 4 hours and 10 specimens applied with bleaching agent for 8 hours each day for 4 days. Measurement with Knoop Hardness Tester has been done each day. The result of this research is the surface hardness value of hybrid composite resin was decreased significantly after the application of bleaching agent 6% hydrogen peroxide according to time of application. But there?s no significantly differences compared to control group. The conclusion is bleaching agent that contain 6% hydrogen peroxide can be used for patient with hybrid composite resin in 4 hour application for one day.
Depok: Universitas Indonesia, 2008
S-Pdf
UI - Skripsi Open  Universitas Indonesia Library
cover
Wigiarti
Abstrak :
Latar Belakang: Teknik internal bleaching kontemporer menggunakan hydrogen peroksida yang diaplikasikan pada kamar pulpa gigi nonvital. Prosedur internal bleaching dengan hydrogen peroksida 35% dapat meninggalkan residu radikal bebas pada struktur gigi yang akan menganggu kekerasan mikro dentin. Teh hijau sebagai antioksidan dapat menghilangkan residu radikal bebas dan meningkatkan kekerasan mikro dentin. Tujuan: mengetahui kekerasan mikro dentin pada gigi pasca internal bleaching dengan hydrogen peroksida yang diaplikasikan teh hijau 10% dan 35% selama 2 menit. Metode: Prosedur internal bleaching dilakukan pada 25 gigi premolar atas yang dipotong menjadi dua bagian mesio-distal, kemudian sampel dibagi menjadi 5 kelompok. Kelompok 1 tanpa bleaching dan tanpa aplikasi teh hijau, kelompok 2 pasca bleaching tanpa aplikasi teh hijau, kelompok 3 pasca bleaching tunda 2 minggu, kelompok 4 pasca bleaching aplikasi teh hijau 10% selama 2 menit, kelompok 5 pasca bleaching aplikasi teh hijau 35% selama 2 menit. Semua kelompok kemudian dilakukan uji kekerasan mikro dentin dengan alat Vicker Hardness Machine Test. Data yang diperoleh dianalisa secara statistik dengan ANOVA satu jalur dan uji Post Hoc Bonferroni. Hasil: Hasil uji Bonferroni menunjukkan perbedaan bermakna kekerasan mikro dentin pada kelompok 1 dan 2; kelompok 1 dan 3; kelompok 2 dan 4; dan kelompok 2 dan 5. Sedangkan antara kelompok 1 dan 5, kelompok 3 dan 4 tidak terdapat perbedaan bermakna. Kesimpulan: Aplikasi teh hijau 35% selama 2 menit cukup untuk meningkatkan kekerasan mikro dentin pada gigi pasca internal bleaching dengan hydrogen peroksida 35%. ......Background: Contemporary bleaching technique involve the use of hydrogen peroxide which can be applied internally in the pulp chamber, in a procedure that can be used only for nonvital teeth. Internal bleaching with 35% hydrogen peroxide will produce free radical residues within the tooth structure and microhardness dentin. Green tea as an antioxidant can remove free radical residues and increase microhardness dentin. Objective: To examine the effect of 10% and 35% green tea application on the microhardness dentin after internal bleaching with 35% hydrogen peroxide. Methods: Internal bleaching procedure was performed on 25 maxillary premolars, then the sample were divided into 5 group. Group 1 without bleaching and antioxidant, group 2 bleaching and without antioxidant, group 3 bleaching and delayed 2 weeks, group 4 bleaching and application greean tea 10% for 2 minutes, and group 5 bleaching and application green tea 35% for 2 minutes. All group were tested for microhardness dentin with Vickers Hardness Machine Test. The data were statistically analyzed with one-way ANOVA and Bonferroni Post Hoc Test. Result: The result showed that there were statistical differences between groups 1 and 2; groups 1 and 3; groups 2 and 4; and groups 2 and 5. Meanwhile between groups 1 and 5; and groups 3 and 4 there was no significant difference. Conclusion: Application of 35% green tea for 2 minutes increased the microhardness dentin after internal bleaching with 35% hydrogen peroxide.
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Abstrak :
Nowadays the use of over the counter (OTC) bleaching material become more popular. The most common composition of this OTC material is mainly carbamide peroxyde and hydrogen peroxyde in various concentration. There many methods for using carbamide peroxyde as bleaching material, such as spray, gel tray or applicable solution, etc. According to the using methods, the possibility contamination between the material and oral mucous membrane is very high. The purpose of this research is to examine the effect of 2% carbamide peroxyde solution on oral mucous membrane. Materials and method : 30 rats of wistar strain divided to 2 groups, the control group consist of 10 rats, and experimental group of 20 rats. The animal of control group received application on their labial vestibulum with aquadest, while for the experimental group applicated with 2% carbamide peroxyde solution. The applications were done for 1 minute, 3 times daily with 10 minutes interval periods. 5 rats of the control group and 10 of the experimental group were killed by epidural anaesthetic after 1 day application. The rest animals were killed after 3 days application. Inferior labia then taken as the specimen, fixated using formaldehyde and processed for microscopic slides stained with HE. Microscopic analyze were done using modified inflammation scoring system developed by Eda & Fukuyama. Statistical analyze shows that there are significant differences of the experimental group inflammation compare to control group, both for 1 day and 3 days application. However there are no differences of oral mucous inflammation between 1 day and 3 days application for both control and experimental groups. Based on this research's result, it can be concluded that bleaching material contain carbamide peroxyde can caused oral mucous inflammation.
Journal of Dentistry Indonesia, 2003
pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Dimas Arya Thayeb
Abstrak :
ABSTRAK Penggunaan serat alam Tandan Kosong Kelapa Sawit (TKKS) sebagai penguat dalam komposit polimer terus digalakkan sebagai alternatif bahan baku yang murah dan berlimpah. Namun, sifat hidrofilik yang dimiliki oleh serat alam TKKS akibat kandungan lignin dan hemiselulosa menyebabkan TKKS memiliki kompabilitas yang rendah dengan matriks polimer yang digunakan. Proses bleaching merupakan metode modifikasi permukaan yang bertujuan untuk meningkatkan sifat hidrofobisitas dari serat TKKS. Potensi penggunaan Hidrogen Peroksida (H2O2­) sebagai bleaching agent dalam larutan alkali menunjukan kemampuan untuk menghilangkan kandungan lignin, hemiselulosa, dan impuritas yang berada pada permukaan serat alam TKKS. Perubahan sifat permukaan TKKS kemudian diteliti menggunakan pengujian sudut kontak dengan metode sessile drop test, SEM, dan FTIR. Tegangan permukaan dari TKKS tanpa perlakuan menunjukan angka 35.18 dynes/cm dan meningkat menjadi 32.33 dynes/cm setelah dilakukan bleaching mengindikasikan adanya peningkatan sifat hidrofobik dari serat TKKS. Selain itu, analisis kuantitatif nilai dispersi menggunakan metode perhitungan statistik skewness ratio dan coefficient of variation menunjukan adanya kecenderungan peningkatan distribusi ukuran serat dari TKKS hasil bleaching. Nilai koefisien variasi yang menurun dari 1.40 menjadi 1.20 setelah perlakuan bleaching menunjukan kondisi distribusi serat TKKS yang lebih seragam. Selain itu, nilai skewness ratio serat TKKS hasil bleaching menunjukan peningkatan nilai dari 1.98 menjadi 2.13 mengindikasikan bahwa serat yang mengalami aglomerasi semakin sedikit. Sedangkan, pada perhitungan Nearest Neighbor Index (NNI), adanya penurunan nilai NNI dari 0.42 pada serat TKKS tanpa perlakuan menjadi 0.32 pada serat hasil perlakuan mengindikasikan meningkatnya kecenderungan serat TKKS untuk mengalami clustering.
ABSTRACT The use of Oil Palm Empty Fruit Bunch (OPEFB) fibers as reinforcement in polymer composites continues to be promoted as an alternative to man-made fiber because of its inexpensive and abundant quantity. However, the hydrophilic nature of natural OPEFB fibers due to lignin and hemicellulose content causes OPEFB to have low compatibility with the common polymer matrix like polypropylene. Bleaching as a surface modification method is used to improve the of OPEFB fibers. The potential use of Hydrogen Peroxide (H2O2) as a bleaching agent in an alkaline solution shows the ability to eliminate lignin, hemicellulose, and impurities that are present on the surface of the natural OPEFB fibers. Changes in the surface properties of OPEFB are then examined using contact angle testing using sessile drop method, SEM, and FTIR analysis. The surface tension of the OPEFB without treatment shows the number as high as 35.18 dynes/cm and decreases to 32.33 dynes/cm after bleaching treatment, indicates an increase in the nature of the OPEFB fibers. In addition, quantitative analysis of dispersion values ​​using the statistical calculation method of skewness ratio and coefficient of variation showed tendency of increasing uniformity of size distribution on OPEFB fiber after bleaching treatment. The coefficient of variation decreased from 1.40 to 1.20 after the bleaching treatment showed a more uniform condition of the OPEFB fiber size distribution relative to its average size. In addition, the skewness ratio of post-bleaching OPEFB fibers shows an increase in value from 1.98 to 2.13 indicating that the agglomeration of fiber is getting sparse. Whereas, in the calculation of Nearest Neighbor Index (NNI), a decrease in the value of NNI from 0.42 on untreated OPEFB fibers to 0.32 on treated fibers indicates an increase in the tendency of OPEFB fibers to experience clustering.
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Dini Kemala
Abstrak :
Limbah minyak pelumas bekas dikategorikan sebagai limbah bahan berbahaya dan beracun B3 yang mengandung logam berat salah satunya Pb. Untuk mengurangi konsentrasi Pb dalam minyak pelumas bekas dan memperbaiki karakteristik minyak pelumas, dilakukan pengolahan dengan menggunakan lempung sebagai bleaching earth melaui proses adsorbsi. Pada penelitian ini, dilakukan karakterisasi awal minyak pelumas bekas dengan spesifikasi SAE 10W-30. Selanjutnya, untuk meningkatkan kemampuan lempung sebagai adsorban, lempung diaktivasi dengan kalsinasi pada temperatur 300, 450, dan 600°C. Hasil XRD menunjukkan terjadi peningkatan montmorillonite dalam lempung hingga 63. Kemudian proses adsorbsi dilakukan untuk mengetahui pengaruh perubahan mineral lempung terhadap kapasitas lempung dalam skala laboratorium dengan konsentrasi lempung 80 g/L. Temperatur adsorbsi adalah 120°C dengan waktu kontak 300 menit. Pada penelitian, diperoleh hasil bahwa adsorbsi timbal mencapai kondisi optimum pada penggunaan lempung teraktivasi kalsinasi 450°C dan konstan pada penggunaan lempung teraktivasi kalsinasi 600. Data isotherm adsorbsi menunjukkan kecocokan dengan model isoterm Freundlich dengan kapasitas adsorbsi 4,05x10-3 mg/g. Karakterisasi akhir minyak pelumas menunjukkan terjadinya perbaikan sifat fisik dan kimiawi minyak pelumas bekas setelah proses adsorbsi.
Waste lubricant oil is categorized as hazardous waste which contains heavy metal such us lead. To reduce the amount of lead concentration and improve waste lubricant oil properties, the waste is treated with clay as bleaching earth through adsorption process. In this study, the physical and chemical properties of waste lubricant oil with specification SAE 10W 30 was analyzed before treated with clay. To enhance clays properties as adsorbent, the clay was activated with calcination at temperature 300, 450, and 600°C. XRD result showed that calcination process could increase montmorillonite percentage in clay, approximately 63. To determine the correlation between clay mineral structure and clay capacity as adsorbent, the adsorption process was conducted in laboratory scale with 80g L at each of activated clay. The adsorption temperature and contact time were 120°C and 300 minutes respectively. The experimental procedure gave result that lead adsorption reached its optimum condition with the used of activated clay at temperature 450 C and remained constact with 600°C calcined clay. Pb adsorption isotherm data showed compability with Freundlich isotherm model with adsorption capacity 4,05x10 3 mg g. The final characterization of treated waste lubricant oil indicated that there was improvement of its properties after adsorption process.
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Firsta Hilwa
Abstrak :
Minyak pelumas bekas merupakan salah satu limbah yang dikategorikan sebagai limbah B3. Dalam limbah tersebut terdapat kandungan logam berat yaitu timbal. Keberadaan timbal ini dikarenakan pada saat mesin bekerja yang menyebabkan mesin mengalami keausan dan logam timbal terlepas ke pelumas. Untuk menghilangkan timbal dari minyak pelumas bekas dapat dilakukan dengan menggunakan lempung alami bleaching earth sebagai adsorben. Pada penelitian ini lempung tersebut diaktivasi menggunakan asam sulfat H2SO4 dengan variasi konsentrasi yaitu 1 M, 1,5 M dan 2 M. Dengan menggunakan asam sulfat tersebut didapatkan hasil persentase mineral montmorillonite meningkat hingga mencapai 68 dan luas permukaan membesar hingga pencapai 62,9 m2/g. Aktivasi tersebut juga terlihat dapat meningkatkan daya adsorbensi dan mempersingkat waktu kontak. Dari hasil percobaan yang dilakukan diketahui bahwa kondisi adsorpsi optimum terjadi pada aktivasi dengan konsentrasi 1,5 M dan dengan waktu kontak adsorpsi 30 menit. Dengan kondisi tersebut, kemudian dilakukan variasi kosentrasi adsorben dengan variasi konsenstrasi 20 g/L, 40 g/L, 60 g/L, 80 g/L dan 100 g/L. Dengan variasi tersebut maka didapatkan konsentrasi optimum yaitu 20 g/L.
Used lubricating oil is one of waste categorized as hazardous and toxic waste. It contains heavy metal, and one of them is lead. The existence of lead is due to when the engine is working so that the engine is wearing and lead metal is released to the lubricant. Removing lead from used lubricating oil can be done by using natural clay bleaching earth as adsorbent. In this study, the clay was activated by using sulfuric acid H2SO4 with 1 M, 1.5 M and 2 M concentration variation. By using sulfuric acid, the percentage of montmorillonite mineral increased up to 68 and the surface area expanded up to 62,9 m2 g. Activation is also seen to increase the adsorbensi power and shorten the contact time. From the experimental results, it is found that optimum adsorption conditions occured at activation with concentration of 1.5 M and with 30 minutes adsorption time. Under these conditions, concentration variation of adsorbent with concentration of 20 g L, 40 g L, 60 g L, 80 g L and 100 g L were observed. With this variation, the result shows optimum concentration of 20 g L.
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library