Hasil Pencarian  ::  Simpan CSV :: Kembali

"Nanostructured zincoxide (ZnO) was synthesized via a sonochemical method. The effect of the duration of ultrasonic irradiation in a continuous mode on the generated particles was investigated. Additionally, the effect of flowing either air or nitrogen during the sonication process was investigated. Zinc nitrate andammonia water-based solutions were selected as chemicals without the additionof other surfactants. The generated particles indicated that a wurtzitestructure of ZnO in a hexagonal phase was formed with a crystalline size that increasedas the ultrasound irradiation time increased. The morphology of the generatedZnO particles could be changed from flowerlike to needlelike structures viacontinuous ultrasound irradiation over one to two hours, resulting in increasesin the particle lengths and decreases in the particle diameters from 200 to 80nm. Photoluminescence intensity was also increased with increases in the ultrasonicirradiation times. Photoluminescence spectra were also influenced by theatmospheric environment. Two bands centered at 390 and 500 nm were generatedunder a nitrogen environment. On the other hand, a single wide band with a peakat around 430 nm was found for particles generated under an air environment. Itcan be applied for light emitting diodes (LED) or laser fabrication with acontrolled emitting band."

"Nanostructured zinc oxide (ZnO) was synthesized via a sonochemical method. The effect of the duration of ultrasonic irradiation in a continuous mode on the generated particles was investigated. Additionally, the effect of flowing either air or nitrogen during the sonication process was investigated. Zinc nitrate and ammonia water-based solutions were selected as chemicals without the addition of other surfactants. The generated particles indicated that a wurtzite structure of ZnO in a hexagonal phase was formed with a crystalline size that increased as the ultrasound irradiation time increased. The morphology of the generated ZnO particles could be changed from flowerlike to needlelike structures via continuous ultrasound irradiation over one to two hours, resulting in increases in the particle lengths and decreases in the particle diameters from 200 to 80 nm. Photoluminescence intensity was also increased with increases in the ultrasonic irradiation times. Photoluminescence spectra were also influenced by the atmospheric environment. Two bands centered at 390 and 500 nm were generated under a nitrogen environment. On the other hand, a single wide band with a peak at around 430 nm was found for particles generated under an air environment. It can be applied for light emitting diodes (LED) or laser fabrication with a controlled emitting band."

"Coupling power generation with syngas-based chemical synthesis according to the so-called ‘Polygeneration-Annex’ concept offers economic and technical benefits. Clemens Forman assesses the integration of incoming streams by the Annex plant from a power plant point of view across its full load range. Analyses are done by load-dependent flowsheet simulation. The pulverized lignite combustion power plant process is covered by two generic technical states: an existing 650 MW(el) power plant and a near future 1,100 MW(el) power plant with duo block design and dry lignite co-firing. Modeling comprises both the flue gas path and the water-steam circuit. Appropriate stream interfaces are identified and determined depending on the load status. The technical feasibility of integration can be proven."