Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 5 dokumen yang sesuai dengan query
cover
Tanwir Ahmad Farhan
"Fluid Catalytic Cracking (FCC) merupakan metode perengkahan minyak nabati menjadi fraksi yang lebih sederhana dan menghasilkan produk biofuel. Grup riset AIR mengembangkan sebuah teknologi sistem FCC skala bench untuk mengolah minyak kelapa sawit menjadi bahan bakar nabati. Salah satu komponen sistem FCC adalah FCC furnace. FCC furnace merupakan tempat terjadinya proses pembakaran dan memberikan perpindahan panas yang tinggi di seluruh sistem FCC, terutama untuk memanaskan striper. Pengujian pertama menggunakan 2 kg bricket biochar dan pengujian kedua menggunakan 1kg bricket biochar dan 1kg biochar halus. Tujuan penelitian ini untuk melakukan optimasi online menggunakan model ANN dan optimasi PSO pada FCC furnace. Optimasi pemodelan ANN dan Optimasi PSO dapat memprediksi temperatur maksimum striper terjadi dengan menggunakan 1 kg bricket biochar dan 1 kg biochar halus. Dengan menggunakan optimasi online, temperatur striper actual mencapai 131.25 oC ,dan perbedaan pada setiap temperatur distabilkan dibawah 100 oC. Pemodelan algoritma optimasi online dapat berjalan dengan baik namun belum dapat meningkatkan temperatur aktual striper mencapai temperatur striper PSO maksimum dengan baik.

Fluid Catalytic Cracking (FCC) is a method of cracking vegetable oil into simpler fractions and producing biofuel products. The AIR research group developed a bench-scale FCC system technology to process palm oil into biofuels. One component of the FCC system is the FCC furnace. The FCC furnace is where the combustion process occurs and provides high heat transfer throughout the FCC system, especially for heating the striper. The first test used 2 kg of biochar bricks and the second test used 1 kg of biochar bricks and 1 kg of fine biochar. The purpose of this study is to carry out online optimization using the ANN model and PSO optimization on the FCC furnace. ANN modeling optimization and PSO optimization can predict the maximum temperature of the striper that occurs using 1 kg of biochar bricket and 1 kg of fine biochar. By using online optimization, the actual striper temperature reaches 131.25 oC, and the difference at each temperature is stabilized below 100 oC. Online optimization algorithm modeling can run well but has not been able to increase the actual temperature of the striper to reach the maximum PSO striper temperature properly."
Depok: Fakultas Teknik Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Zarkoni Azis
"Konsumsi minyak bensin atau gasoline untuk bahan bakar mesin transportasi dalam negeri selama ini telah melebihi kapasitas unit produksi. Sebagian besar produk gasoline dihasilkan dari unit perengkahan katalitik menggunakan umpan utama fraksi gasoil. Upaya untuk meningkatkan yield dan kualitas oktana gasoline umumnya dilakukan melalui seleksi katalis dan optimalisasi kondisi proses, meskipun demikian sifat umpan juga mempengaruhi produk akhir. Penelitian ini bertujuan untuk menemukan dan mempelajari metode proses alternatif peningkatan yield dan angka oktana gasoline dengan cara modifikasi umpan menggunakan campuran vacuum gasoil dengan trigliserida dan asam lemak jenuh dan tak jenuh berbasis sawit.
Eksperimen reaksi perengkahan dilakukan pada fluid-bed reaktor dengan umpan campuran vacuum gasoil dengan minyak sawit murni, distilat asam lemak dan asam oleat dalam rentang konsentrasi 0 sampai 15% menggunakan katalis zeolite REY pada suhu 530oC dan rasio katalis-umpan 5,5 g/g. Perengkahan umpan menghasilkan produk gas dan cair serta coke yang terdeposit dalam katalis. Produk gas dianalisa menggunakan GC refinery gas analyzer untuk menentukan komposisi gas hidrokarbon C1, C2, C3 & C4 serta H2. Produk cair dianalisa menggunakan GC simulated distillation untuk menentukan yield gasoline, LCO dan bottom. Angka oktana gasoline dianalisa dengan GC DHA. Kadar air dalam produk cair dianalisa dengan metode Karl-Fischer. Analisa coke dengan metode Infrared dan keasaman katalis dengan metode NH3-TPD.
Dari hasil penelitian didapatkan bahwa perengkahan VGO dengan 5%RBDPO meningkatkan yield gasoline dari 42,9% menjadi 46,9% dan angka oktana dari 91,8 menjadi 96,2. Perengkahan VGO dengan 5%(RBDPO_PFAD) dapat meningkatkan yield gasoline menjadi 48,3% dengan angka oktana 97,5. Perengkahan VGO dengan 5%(RBDPO_Oleic acid) dapat meningkatkan yield gasoline menjadi 45,2% dengan angka oktana 98,2. Kandungan asam lemak jenuh dan tak jenuh dalam umpan berperan dalam reaksi-reaksi perengkahan, isomerisasi, transfer hidrogen dan aromatisasi yang mempengaruhi struktur yield produk dan komposisi hidrokarbon n-parafin, iso-parafin, olefin, naften dan aromatik. Penambahan RBDPO, PFAD dan Oleic acid pada umpan VGO menyebabkan kenaikan komposisi hidrokarbon iso-parafin dan olefin dalam gasoline.
The consumption of gasoline for transportation fuel in domestic has exceeded the production unit capacity. Most of gasoline is produced from fluid catalytic cracking unit that proceeds gasoil fraction as main feedstock. Some efforts to upgrade gasoline yield and its octane quality usually is perfomed by catalyst selection and process optimization, eventhough feed nature also influence to the end-product.
This research work was aimed to find out and learn the alternative method in fluid catalytic cracking process to upgrade gasoline yield and octane quality by means of feed modification using mixture of vacuum gasoil with palms triglycerides and fatty acids having single and double-bonds. The experimental catalytic reaction was performed at fluid-bed reactor of advance cracking evaluation unit utilizing mixture of vacuum gasoil with pure palm oil, fatty acid distillate and oleic acid over zeolite REY catalysts at reaction temperature of 530oC and catalyst oil ratio 5.5 g/g.
The cracking of feedstocks under process condition resulted in gaseous and liquid products, as well as coke deposited on catalyst. The gaseous product was analyzed by online gas chromatography to identify dry gas of C1, C2 & H2, and LPG of C3, C4 hydrocarbons. Liquid product was analyzed using gas chromatography of simulated distillation to obtain yields of gasoline, light cycle oil and bottoms. Gasoline octane number was analyzed using GC DHA method. Water contained in liquid product was analyzed by Karl Fischer method. Coke was analyzed by online Infrared analyzer and catalyst acidity was analyzed using NH3 TPD method.
From the reaseach work, it was found that the cracking of VGO with 5%RBDPO could increase gasoline yield from 42.9% to 46.9% and octane number from 91.8 to 96.2. The cracking of VGO with 5%RBDPO PFAD increased gasoline yield to 48.3% and octane number to 97.5 meanwhile cracking of VGO with 5%RBDPO Oleic acid increased gasoline yield to 45.2% and octane number to 98.2. The role of single and double-bonds fatty acids in feedstock appeared to play in reactions of cracking, isomerization, hydrogen transfer and aromatization that influenced the product yields structure and hydrocarbon composition of nparaffins, isoparaffins, olefins, naphthene and aromatics. The addition of RBDPO, PFAD dan Oleic acid in VGO had caused increase of hydrocarbon composition of iso-paraffins and olefin in gasoline"
Depok: Fakultas Teknik Universitas Indonesia, 2020
D-pdf
UI - Disertasi Membership  Universitas Indonesia Library
cover
Tanwir Ahmad Farhan
"Fluid Catalytic Cracking (FCC) adalah suatu proses konversi yang digunakan untuk mengubah fraksi hidrokarbon berbahan bakar tinggi agar dapat menjadi produk bahan bakar lainnya. Untuk menjalankan sistem kendali FCC diperlukan Supervisory Control And Data Acquisition (SCADA). Sistem SCADA yang digunanakan untuk mengontrol, mengakuisisi, serta memonitori regenerator FCC dengan menggunakan Blynk sebagai HMI, laptop sebagai MTU dan arduino sebagai RTU. Dalam proses FCC dibutuhkan temperatur optimum pada regenerator, maka dari itu data yang diambil dioptimasi menggunakan Artificial Neural Network. Hasil training ANN didapatkan nilai koefisien korelasi sebesar 84.08%, nilai MSE berada pada kisaran 10-2 dan nilai error sebesar 0.053. Dari hasil tersebut menunjukan besarnya keakuratan ANN dalam mempelajari data. Dengan menggunakan Genetic Algorithm (GA) didapatkan hasil optimasi temperatur regenerator sebesar 765.32oC pada laju aliran massa ejektor 0.0067 kg/s, laju aliran massa regenerator 0.0043 kg/s dan bukaan katup ejektor “50” atau 7500 step pada motor stepper.

Fluid Catalytic Cracking (FCC) is a conversion process used to convert high-fuel hydrocarbon fractions into other fuel products. To run the FCC control system, Supervisory Control And Data Acquisition (SCADA) is required. The SCADA system is used to control, acquire, and monitor FCC regenerators using Blynk as HMI, laptops as MTU and Arduino as RTUs. In the FCC process, the optimum temperature needed for the regenerator, therefore the data taken is optimized using Artificial Neural Network. ANN training results obtained a correlation coefficient of 84.08%, the MSE value is in the range of 10-2 and an error value of 0.053. From these results shows the accuracy of ANN in studying data. By using Genetic Algorithm (GA), the result of optimization of regenerator temperature is 765.32oC at ejector mass flow rate of 0.0067 kg/s, regenerator mass flow rate of 0.0043 kg/s and valve opening of "50" or 7500 step stepper motors."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
M.Hilman Gumelar Syafei
"Beberapa studi yang telah dilakukan sebelumnya menunjukkan bahwa minyak kelapa sawit dapat menghasilkan senyawa hidro karbon yang sebagian besarnya berupa bio-gasoline. Diantara cara yang dapat dilakuakn untuk mengolah minyak kelapa sawit adalah melalui teknologi Fluid Catalytic Cracking (FCC). Penggunaan teknologi konversi FCC saat ini juga telah dimanfaatkan untuk menghasilkan bahan bakar biofuel yang dihasilkan dari material minyak nabati. Grup riset AIR mengembangkan sebuah teknologi teknologi sistem FCC skala bench untuk mengolah minyak kelapa sawit menjadi bahan bakar nabati. Untuk meningkatkan dan mengoptimasi kinerja sistem FCC yang dikembangkan oleh grup riset AIR, diperlukan sebuah metode yang dapat digunakan untuk mengestimasi karakteristik dari sistem tersebut. Studi ini akan membahas tentang pemodelan hidrodinamika sistem FCC yang dikembangkan oleh Grup riset AIR melalui prinsip Atomic Model. Pemodelan dilakukan dengan menggunakan software opensource OpenModelica. Diperoleh bahwa model atomic dapat digunakan untuk mengestimasi karakteristik aliran hidrodinamika sistem FCC yang dikembangkan oleh Grup riset AIR

A number of previous study show that palm oil coul be processed to produce hydro carbon compound that mainly contains bio-gasoline. Among various method, the conversion process could be performed by using fluid catalytic cracking. FCC is also utilized to produce biofuel from the others bio-oil source. Ahmad Indra Research Group (AIR) has developed a bench-scale FCC technology for converting pal oil into biofuel. In order to optimize the FCC performance, it needs a method that could be used to estimate the characteristics of the FCC system. This study discuss about the hydrodynamic modeling of the FCC system through atomic model. The modeling is performed by using OpenModelica open source software. It is obtained that the atomic model could be usde to estimate the hydrodynamics characteristics of the FCC system."
Depok: Fakultas Teknik Universitas Indonesia, 2020
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Abdullah Robbani
"Beberapa studi yang telah dilakukan sebelumnya menunjukkan bahwa minyak kelapa sawit dapat menghasilkan senyawa hidro karbon yang sebagian besarnya berupa bio-gasoline. Diantara cara yang dapat dilakuakn untuk mengolah minyak kelapa sawit adalah melalui teknologi Fluid Catalytic Cracking (FCC). Penggunaan teknologi konversi FCC saat ini juga telah dimanfaatkan untuk menghasilkan bahan bakar biofuel yang dihasilkan dari material minyak nabati. Grup riset AIR mengembangkan sebuah teknologi teknologi sistem FCC skala bench untuk mengolah minyak kelapa sawit menjadi bahan bakar nabati. Salah satu komponen penting dalam sistem FCC yang dikembangkan oleh grup riset AIR ini adalah condenser. Diperlukan sebuah desain yang dapat digunakan untuk mengkondensasi uap produk hasil proses sistem FCC. Studi ini akan membahas tentang desain baru condenser yang dapat menggantikan condenser yang lama agar kinerjanya lebih optimal. Desain bariu dihitung berdasarkan performa dari condenser yang lama kemudian dilakukan pernacangan berdasarkan analisis thermal.

Previous studies have shown that palm oil can produce hydro-carbon compounds, mostly bio-gasoline. Among the ways that can be done to process palm oil is through Fluid Catalytic Cracking (FCC) technology. The use of FCC conversion technology at this time has also been utilized to produce biofuel fuel produced from vegetable oil materials. The AIR research group developed a bench scale FCC system technology to process palm oil into biofuels. One of the important components in the FCC system developed by the AIR research group is the condenser. A condenser design is required that can be used to condense the product vapor from the process of the FCC system. This study will discuss about a new condenser design that can replace the old condenser for optimal performance. The new design is calculated based on the performance of the old condenser. The design is carried out based on thermal analysis."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library