Hasil Pencarian  ::  Simpan CSV :: Kembali

"Serangkaian percobaan mengenai teknik pembentukan material polimer adhesive, yaitu Poli(vinil) asetat (PVAc) melalui tahapan-tahapan reaksi sintesis mengunakan teknik polimerisasi emulsi semi kontinu telah dilakukan. PVAc disintesis dari vinil asetat monomer (VAM) dengan Ammonium Peroxydisulphate (APS) sebagai inisiator dalam medium air dengan suhu reaksi dijaga pada 70 ± 5 °C dan kecepatan pengadukan masingmasing 300 rpm selama 4 jam waktu reaksi. Zat koloid pelindung berupa Poli(vinil) alkohol (PVOH) parsial hidrolisis, surfaktan anionik (SLS) dan surfaktan nonionik (NP- 10) ditambahkan untuk meningkatkan kinerja emulsi PVAc. Semua produk hasil sintesis belum memenuhi target yield teoretis berdasarkan pengukuran solid content dengan kadar residual monomer > 29%. Pengukuran pH dan konduktivitas dengan Hanna Instrument pada proses reaksi menunjukan semua produk memiliki pH akhir 2,8 dan konduktivitas > 700 μS. pengukuran kekentalan menggunakan Viscometer Ostwald menunjukan semua sampel memiliki nilai < 3 Cp. Pengukuran bobot jenis menggunakan Pycnometer menunjukan semua sampel memiliki nilai > 1.03 g/ml. Pembentukan polimer PVAc yang terbentuk berdasarkan gugus fungsi menggunakan FTIR menunjukan karakteristik molekul pada bilangan gelombang 3310-3444 cm-1, 2935 cm-1 dan 1756 cm-1. Pola pemutusan rantai yang khas dengan menganalisis komponen menggunakan GC-MS, didapatkan pola pemutusan pada m/z 86 dan 43.

---

A series of experiments on the technique of forming adhesive polymer materials, namely Poly(vinyl) Acetate/PVAc through stages of a synthesis reaction using a semicontinuous emulsion polymerization technique have been carried out. PVAc was synthesized from Vinyl Acetate Monomer (VAM) with Ammonium Peroxydisulphate (APS) as an initiator in water medium with the reaction temperature being maintained at 70 ± 5 °C and stirring speed of 300 rpm for 4 hours of reaction time. A protective colloid in the form of partial hydrolysis Poly(vinyl) Alcohol (PVOH), anionic surfactant (SLS) and nonionic surfactant (NP-10) was added to improve the performance of the PVAc emulsion. All synthesized products have not met the theoretical yield target based on solid content measurement with monomer residual content > 29%. Measurement of pH and conductivity using Hanna Instrument in the reaction process showed that all products had a final pH of 2,8 and conductivity > 700 μS. Viscosity measurement using the Ostwald Viscometer shows all samples have a value < 3 Cp. Measurement of specific gravity using a Pycnometer shows that all samples have a value > 1.03 g/ml. The formation of the PVAc based on structural characteristics in the form of functional groups using FTIR showed molecular characteristics shows at wavenumber of 3310-3444 cm-1, 2935 cm-1 and 1756 cm-1. A typical chain breaking pattern by analyzing the components using GCMS, the breaking patterns were obtained at m/z 86 and 43."

"Penelitian telah dilakukan untuk mengetahui pengaruh konsentrasi koloid pelindung Polivinil Alkohol (PVA) terhadap kekuatan daya rekat polimer emulsi Polivinil Asetat (PVAc). Sintesis polimerisasi emulsi dilakukan dengan teknik semi-kontinyu dengan komponen polimerisasi terdiri dari air, larutan PVA terhirolisis sebagian medium viscosity, dan surfaktan SDS. Sementara monomer Vinil Asetat (VAM) dan inisiator APS diberikan secara kontinyu selama proses sintesis berlangsung dengan temperature reaksi 70°C, kecepatan agitasi 300 rpm, dan waktu reaksi 5 jam dengan variasi konsentrasi larutan koloid pelindung PVA 2 wt%, 5 wt% dan 10 wt%. Kekuatan rekat polimer PVAc dilakukan dengan uji kuat geser terhadap kayu triplek mengikuti standar ASTM D905-03 dan diperoleh nilai shear strength PVAc meningkat seiring bertambahnya konsentrasi PVA sebesar 96, 225, 277, dan 421 kiloPascal. Parameter lain hasil akhir polimer juga dievaluasi dalam penelitian ini, meliputi temperatur reaksi, kandungan padatan, viskositas, nilai pH, dan densitas. Uji gugus fungsi pembentukan PVAc telah dilakukan dengan Spektrometer FTIR dan diketahui adanya gugus carbonyl C=O stretching & C=C stretching, dan gugus hydroxy O-H stretching. Ukuran partikel diuji dengan Dynamic Light Scattering PSA dan diperoleh ukuran 216 nm untuk PVAc tanpa koloid pelindung, sedangkan pada PVAc dengan koloid pelindung PVA berkisar antara 35-68,5 nm.

---

Research has been conducted to determine the effect of the concentration of protective colloid Polyvinyl Alcohol (PVA) on the adhesive strength of Polyvinyl Acetate (PVAc) emulsion polymer. The synthesis of emulsion polymerization was carried out using a semi-continuous technique with polymerization components consisting of water, partially hydrolyzed PVA solution with medium viscosity, SDS surfactant. Meanwhile, Vinyl Acetate (VAM) monomer and APS initiator were administered continuously during the synthesis process with a reaction temperature of 70°C, agitation speed of 300 rpm, and a reaction time of 5 hours with variations in the concentration of the protective colloid PVA solution 2, 5 and 10% by weight. The adhesive strength of the PVAc polymer was carried out by a shear strength test against plywood following the ASTM D905-03 standard and the value of the shear strength of PVAc increased with the increase in PVA concentration of 96, 225, 277, and 421 kiloPascal. Other parameters of the final polymer yield were also investigated in this study, including reaction temperature, solids content, viscosity, pH value, and density. Function group test for PVAc formation has been carried out with an FTIR Spectrometer and it is known that there are carbonyl groups C=O stretching & C=C stretching, and hydroxy groups O-H stretching. The particle size was tested with Dynamic Light Scattering PSA and obtained a size of 216 nm for PVAc without a protective colloid, while for PVAc with a PVA protective colloid it ranged from 35-68.5 nm."