Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 10 dokumen yang sesuai dengan query
cover
Carina Aulia Wijayanti
"Nanokomposit Fe2O3/Mn2O3-Grafena dengan variasi persen berat grafena berhasil disintesis dengan metode hidrotermal. Hasil X-ray Diffraction (XRD) dapat menunjukkan bahwa sampel tidak memiliki pengotor. Kehadiran graphene dalam nanokomposit telah berhasil ditunjukkan dengan mengukur spektroskopi Raman dan spektroskopi sinar-X dispersif energi (EDX). Peningkatan spesifik dalam area sampel seiring bertambahnya graphene, dapat dikonfirmasi melalui isoterm adsorpsi-desorpsi N2. Vibrating Sample Magnetometer (VSM) menunjukkan bahwa magnetisme sampel menurun dengan meningkatnya graphene. Uji aktivitas foto-Fenton nanokomposit Fe2O3/Mn2O3 dengan adanya graphene digunakan untuk mengevaluasi degradasi metilen biru (MB) dan jingga metil (MO) di bawah paparan sinar UV. Hasil foto-Fenton optimum diperoleh pada nanokomposit Fe2O3/Mn2O3-7G 0,2 g/L dengan 2 mL H2O2 pada pH 4. Spesies aktif yang berperan dalam aktivitas foto-Fenton adalah OH● . Nanokomposit Fe2O3 /Mn2O3-7G juga menunjukkan sifat dapat digunakan kembali.

Fe2O3/Mn2O3-Graphene nanocomposite with various weight percent graphene was successfully synthesized by hydrothermal method. The results of X-ray Diffraction (XRD) can show that the sample has no impurities. The presence of graphene in nanocomposites has been successfully demonstrated by measuring Raman spectroscopy and energy dispersive X-ray spectroscopy (EDX). The specific increase in sample area as graphene increases, can be confirmed through the N2 adsorption-desorption isotherm. The Vibrating Sample Magnetometer (VSM) shows that the magnetism of the sample decreases with increasing graphene. Photo-Fenton activity test of Fe2O3/Mn2O3 nanocomposite in the presence of graphene was used to evaluate the degradation of methylene blue (MB) and methyl orange (MO) under UV light exposure. Optimum photo-Fenton results were obtained on Fe2O3/Mn2O3-7G 0.2 g/L nanocomposite with 2 mL H2O2 at pH 4. The active species that played a role in photo-Fenton activity was OH●. Fe2O3/Mn2O3-7G nanocomposites also showed reusability."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sarah Modistian
"Studi adsorpsi methyl orange (MO) menggunakan adsorben karbon aktif dan lumpur alum telah dilakukan untuk mengetahui efektivitas adsorben serta mengetahui faktor-faktor yang mempengaruhi eksperimen pada tingkat penyisihan MO. Beberapa faktor pengaruh yang diamati pada proses adsorpsi ini adalah efek konsentrasi adsorben, konsentrasi polutan, pH, temperatur, kecepatan pengadukan, volume reaksi serta penggunaan kembali adsorben (reuse). Studi dilakukan karena MO merupakan salah satu zat pewarna yang berbahaya dalam industri tekstil yang memiliki dampak terhadap manusia dan lingkungan. Berdasarkan eksperimen parametrik yang dilakukan pada adsorben karbon aktif diketahui bahwa seiring dengan naiknya konsentrasi adsorben, efisien penyisihan polutan MO juga meningkat sebesar 99,87% pada 1 g/L karbon aktif. Sedangkan pada efek konsentrasi polutan MO berbanding terbalik dimana semakin besar konsentrasi polutan yang diberikan, tingkat penyisihan pada adsorben semakin menurun, yaitu dari 95,89% menjadi 16,8%. Dan untuk adsorben lumpur alum, efisiensi penghilangan polutan MO sangat kecil hanya 5% dengan aktivasi KOH. Dari kedua perbandingan adsorben yang telah dilakukan, karbon aktif merupakan adsorben yang efektif digunakan untuk menghilangkan polutan methyl orange di air dengan persentase removal hampir 100% pada konsentrasi adsorben 0.5 g/L. Karbon aktif juga dapat diregenerasi dengan efisiensi penyisihan mencapai 80%.
"
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Latifa Hanum Lalasari
"Teknologi fotokatalitik dengan memanfaatkan katalis TiO2 cukup menjanjikan dalam mengatasi permasalahan energi dan lingkungan. Tujuan penelitian adalah melakukan sintesis Nanotube TiO2 menggunakan proses hydrothermal untuk penyisihan methyl orange. Tahapan penelitian adalah sintesis TiO2 dengan proses non-hydrolytic sol gel (NSG) dari prekursor TiCl4 dan dilanjutkan proses hydrothermal. Pada proses hydrothermal digunakan juga prekursor TiO2 P-25.
Hasil penelitian menunjukkan TiO2 dengan morfologi nanotube mempunyai luas permukaan spesifik lebih besar daripada TiO2 morfologi nanopartikel. Proses hydrothermal mengubah stuktur TiO2 dari kristalin menjadi amorf nanotube sehingga post treatment dilakukan untuk meningkatkan derajat kristalin nanotube TiO2. Dari hasil uji kinerja katalis didapatkan katalis nonotube TiO2 paling efektif menyisihan methyl orange sebesar 41, 6 % sedangkan katalis TiO2 P-25 dapat menyisihan methyl orange sebesar 93,8 % selama 90 menit.

Photocatalysis is currently accepted as one of the most promising technologies for overcoming problems of energy and environmental. The purpose of research is to the synthesis of nanotube TiO2 using hydrothermal method for dyes decolorization of methyl orange. The procedure of research was the synthesis of TiO2 catalyst from TiCl4 precursor using non-hydrolytic sol gel (NSG) and continued hydrothermal process.
The result of research showed that Nonotube TiO2 has specific surface area bigger than nanoparticle TiO2. Hydrothermal process can change TiO2 from crystalline becomes nanotube amorf. The result of photocatalytic process showed that nonotube TiO2 catalystis was the most effectively of methyl orange decolorization about 41, 6 % whereas nanoparticle TiO2 P-25 catalyst about 93,8 % for methyl orange decolorization during 90 minutes. "
Depok: Fakultas Teknik Universitas Indonesia, 2009
T25901
UI - Tesis Open  Universitas Indonesia Library
cover
Eddy Heraldy
"ABSTRACT
The objective of this research is to synthesis of Mg/Al hydrotalcite-like (Mg/Al HTlc) from brine water and its application as a methyl orange (MO) removal. The research initiated with the synthesis of Mg/Al HTlc from brine water, which is well known as the desalination process wastewater. Characterization of the Mg/Al HTlc synthesized
was confirmed through X-ray Diffraction and FT-IR Spectroscopy. The determination of optimum acidity, adsorption rate, and energy and capacity adsorption were studied. The result showed that pH 4 was the optimum acidity for the adsorption of MO on Mg/Al HTlc. MO was adsorbed at pseudo-second order adsorption rate of 1.03 × 105g mol-1min-1 on the Mg/Al HTlc. The adsorption data fitted well
into the linearly transformed Freundlich equation. "
[Direktorat Riset dan Pengabdian Masyarakat UI;Universitas Sebelas Maret. Fakultas Matematika dan Ilmu Pengetahuan Alam;Universitas Sebelas Maret. Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Sebelas Maret. Fakultas Matematika dan Ilmu Pengetahuan Alam], 2011
J-Pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Fauzan Ramadhani
"Methyl orange (MO) merupakan bahan pewarna yang berbahaya bagi kesehatan dan lingkungan. MO sering digunakan dalam industri tekstil dan menghasilkan limbah dalam jumlah berbahaya yang perlu didegradasi. Salah satu cara yang efisien untuk mendegradasi MO adalah dengan cara fotokatalitik. Pada penelitian ini, dilakukan sintesis Cu/TiO2 nanosheet dan Cu/TiO2 flakes sebagai katalis untuk fotodegradasi MO. TiO2 nanosheet memiliki kemampuan fotokatalitik terbaik karena dapat mendegradasi 98,815% MO selama 210 menit. Sementara persentase degradasi Cu/TiO2 nanosheet, Cu/TiO2 flakes, dan Cu/TiO2 flakes masing-masing sebesar 96,644 %, 91,272 %, dan 62,554 % dengan konstanta laju untuk TiO2 nanosheet, TiO2 flakes, Cu/TiO2 nanosheet, dan Cu/TiO2 flakes berturut-turut adalah 2,238 × 10-2, 4,718 × 10-3, 1,646 × 10-2, dan 1,172 × 10-2 menit-1. Bentuk TiO2 nanosheet terbukti memiliki kemampuan fotokatalitik yang lebih baik dibandingkan bentuk TiO2 flakes. Katalis yang terbentuk dikarakterisasi dengan X-Ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Spektroskopi Raman, Field Emission Scanning Electron Microscopy (FESEM), Scanning Electron Miscroscopy - Energy Dispersion X-Ray (SEM-EDX), Surface Area Analyzer – Brunauer–Emmett–Teller (SAA–BET), dan Spektroskopi UV – Diffuse Reflectance Spectroscopy (DRS). Hasil uji fotokatalis diukur dengan Spektrofotometer UV-Vis.

Methyl orange (MO) is a coloring agent that harms health and the environment. MO is frequently used in the textile industry and generates hazardous amounts of waste that need to be degraded. One of the efficient ways to degrade MO is by photocatalytic method. In this research, synthesis of Cu/TiO2 nanosheet and Cu/TiO2 flakes was carried out as catalysts for MO photodegradation. TiO2 nanosheet has the best photocatalytic ability because it can degrade 98.815% MO for 210 minutes. While the percentage of degradation of Cu/TiO2 nanosheet, Cu/TiO2 flakes and Cu/TiO2 flakes were 96.644 %, 91.272 % and 62.554 % respectively, with rate constants for TiO2 nanosheet, TiO2 flakes, Cu/T TiO2 nanosheet and Cu/TiO2 flakes were 2.238 × 10-2, 4.718 × 10-3, 1.646 × 10-2, and 1.172 × 10-2 min-1 respectively. The TiO2 nanosheet form is proven to have better photocatalytic abilities than the TiO2 flakes form. The formed catalysts were characterized by X-Ray Diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FTIR), Raman Spectroscopy, Field Emission Scanning Electron Microscopy (FESEM), Scanning Electron Microscopy - Energy Dispersion X-Ray (SEM-EDX), Surface Area Analyzer-Brunauer–Emmett–Teller (SAA–BET), and UV–Diffuse Reflectance Spectroscopy (DRS). The results of the photocatalyst test were measured with a UV-Vis Spectrophotometer."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Amara Jasmine Azzahra
"Industri tekstil menggunakan pewarna tekstil, seperti methyl orange, yang sulit terurai dan tidak ramah lingkungan sehingga dapat menyebabkan pencemaran air. Oleh karena itu, perlu dilakukan optimasi pengolahan air limbah hasil samping kegiatan industri. Pada penelitian ini, telah berhasil disintesis Cu-ZnO/GO sebagai katalis untuk fotodegradasi methyl orange dengan nanokomposit Cu-ZnO/GO. ZnO yang semula memiliki energi celah pita senilai 3,18 eV, saat didoping oleh Logam Cu dan GO memiliki energi celah pita yang lebih rendah yaitu senilai 2,49 eV ditinjau dengan UV-Visible Diffuse Reflectance Spectroscopy (DRS) dan persentase degradasinya terhadap methyl orange meningkat dari 62,18% saat menggunakan ZnO menjadi 93,48% saat menggunakan Cu-ZnO/GO ditinjau menggunakan UV-Vis Spectrophotometer. Katalis-katalis yang telah disintesis juga ditinjau menggunakan karakterisasi Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy - Energy Dispersife X-Ray Spectroscopy (SEM-EDS), Raman Spectroscopy, X-ray Diffraction (XRD), dan Transmission Electron Microscopy (TEM).

The textile industry uses textile dyes, such as methyl orange, which are difficult to decompose and are not environmentally friendly, which can cause air pollution. Therefore, it is necessary to optimize the treatment of by-products of industrial activities. In this study, Cu-ZnO/GO was successfully synthesized as a catalyst for photodegradation of methyl orange with Cu-ZnO/GO nanocomposites. ZnO, which originally had a bandgap energy of 3.18 eV, when doped by Cu Metal and Graphene Oxide, has a lower bandgap energy of 2.49 eV measured using UV-Visible Diffuse Reflectance Spectroscopy (DRS) and the percentage degradation of methyl orange increased from 62.18% when using ZnO to 93.48% when using Cu-ZnO/GO measured using UV-Vis Spectrophotometer. The synthesized catalysts were also characterized using Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy - Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Raman Spectroscopy, X-ray Diffraction (XRD), and Transmission Electron Microscopy (TEM)."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Teddy Prastanta
"Methyl orange (MO) adalah salah satu bahan pewarna yang banyak digunakan di industri tekstil. MO memiliki sifat karsinogen dan berbahaya yang dapat mencemari air dan sangat beracun jika dikonsumsi oleh manusia, sehingga perlu dilakukan fotodegradasi yang efektif. Pada penelitian ini dilakukan sintesis Ag-ZnO/GO untuk fotodegradasi methyl orange. Ag-ZnO/GO memiliki aktivitas fotodegradasi yang baik terhadap methyl orange yang dibuktikan dengan menggunakan UV–Vis diffuse reflectance spectroscopy (UV-DRS) dengan perbandingan nilai band gap yang menurun dari 3,40 eV untuk ZnO menjadi 2,43 eV untuk Ag-ZnO/GO, lalu terdapat peningkatan persentase degradasi sebesar 92 % pada ZnO menjadi 99,6% pada Ag-ZnO/GO dan nilai Kt pada ZnO sebesar 2,21 x 10-2 menit-1 menjadi 2,47 x 10-2 menit-1 pada Ag- ZnO/GO. Katalis juga dikarakterisasi menggunakan Fourier Transform Infra Red (FTIR), Raman Spectrophotometer, X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM) Surface Area Analyzer (SAA-BET), dan persentase degradasi methyl orange diukur dengan UV-VIS Spectrophotometry.

Methyl orange (MO) is a dye that is widely used in the textile industry. MO has carcinogenic and dangerous properties that can pollute water and is very toxic if consumed by humans, so it is necessary to carry out effective photodegradation. In this research, Ag-ZnO/GO was synthesized for photodegradation of methyl orange. Ag- ZnO/GO has good photodegradation activity against methyl orange as proved by using UV-Vis diffuse reflectance spectroscopy (UV-DRS) with a ratio of band gap values that decreased from 3.40 eV for ZnO to 2.43 eV for Ag- ZnO/GO, then there is an increase in the percentage of degradation by 92% in ZnO to 99.6% in Ag-ZnO/GO and the Kt value in ZnO by 2.21 x 10-2 minutes-1 to 2.47 x 10-2 minutes-1 in Ag-ZnO/GO. The catalyst was also characterized using Fourier Transform Infra Red (FTIR), Raman Spectrophotometer, X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Surface Area Analyzer (SAA-BET), and the percentage of methyl orange degradation was measured by UV-VIS Spectrophotometry."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Arief
"Dalam penelitian ini telah berhasil disintesis nanopartikel Seng Oksida (ZnO) dari prekusor Zn(CH3COO)2. 2H2O dalam bentuk cairan koloid dengan metode pengendapan kimia basah berdasarkan variasi konsentrasi larutan natrium hidroksida. Variasi konsentrasi larutan natrium hidroksida yang digunakan adalah 0,1; 0,2; dan 0,4 M. Reaksi pengendapan kimia basah merupakan metode sintesis yang mudah dan murah karena tidak membutuhkan suhu tinggi, peralatan dan bahan yang sederhana. Material semikonduktor ZnO nanopartikel sebagai alternatif material pengganti TiO2 nanopartikel yang menjanjikan untuk aplikasi dalam fotokatalisis yang menghasilkan electron dan hole tengah gencar dikembangkan dewasa ini. Fotokatalisis merupakan sebuah proses reaksi kimia yang dibantu oleh cahaya dan katalis padat. Katalis padat yang digunakan sebagai fotokatalisator adalah nanopartikel ZnO zincite. Untuk mendapatkan partikel berukuran kecil, terdistribusi seragam dan tingkat kristalinitas yang tinggi, dilakukan sintesis dengan metode pengendapan kimia basah kemudian dilanjutkan proses drying, annealing, dan hidrotermal. Hasil yang didapatkan dari karakterisasi XRD, metode hidrotermal menghasilkan produk dengan tingkat kristalinitas yang tinggi dibandingkan dengan proses anil dan drying. Serbuk hasil hidrotermal memilki ukuran kristalit rata-rata sebesar 34,37 nm, serbuk hasil anil 25,96 nm, dan serbuk hasil drying 11,69 nm. Energi celah pita yang dihasilkan serbuk hasil hidrotermal sebesar 3,07 eV, serbuk hasil anil 3,20 eV, dan serbuk hasil drying 3, 24 eV. Katalis nanopartikel ZnO dalam penelitian ini, hasil proses pengendapan kimia basah pada kondisi hidrotermal cukup efektif dalam menyisihan methyl orange sebesar 54,86 % dalam waktu 90 menit, sedangkan pada kondisi anil dapat menyisihkan methyl orange sebesar 83,91 % dalam waktu 90 menit.

In this study have been successfully synthesized nanoparticle Zinc Oxide (ZnO) of the precursor Zn(CH3COO)2. 2H2O in the form of colloidal liquid with a wet chemical deposition methods based on variations in the concentration of sodium hydroxide. Variations in the concentration of sodium hydroxide solution used was 0.1; 0.2, and 0.4 M. Wet chemical precipitation reaction is a synthesis method that is easy and cheap because it does not require high temperatures, the simple tools and materials. Semiconductor material ZnO nanoparticles as an alternative replacement material TiO2 nanoparticles are promising for applications in photocatalyst that produce electrons and holes being intensively developed today . Photocatalyst is a chemical reaction process, assisted by light and the solid catalyst. Solid catalyst is used as photocatalyst ZnO nanoparticles zincite. To obtain small sized particles, uniformly distributed and the degree of crystallinity is high, the synthesis by a wet chemical precipitation method and then continued the process of drying, annealing, and hydrothermal. Results obtained from XRD characterization, the hydrothermal method produces a product with a high degree of crystallinity compared to the annealing process and drying. Hydrothermal powders have the results of the average crystallite size of 34.37 nm, 25.96 nm powders annealed results, and 11.69 nm powder drying results. Bandgap energy generated hydrothermal powders result of 3.07 eV, 3.20 eV powder annealing results, and drying the powder 3.24 eV. ZnO nanoparticle catalysts in this study, the results of wet chemical deposition process in hydrothermal conditions is effective in degrading methyl orange by 54.86% within 90 minutes, while in the annealed condition to degrade methyl orange by 83.91% within 90 minutes."
Depok: Fakultas Teknik Universitas Indonesia, 2011
S1017
UI - Skripsi Open  Universitas Indonesia Library
cover
Bobby Sulistyo Febrian
"Nanopartikel ZnO didop Cu yang ditambah dengan Zeolit telah berhasil disintesis dengan metode Kopresipitasi dengan empat variasi doping Cu. Karakterisasi sampel nanopartikel ini diuji menggunakan Energy Dispersive X-ray (EDX), X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FE-SEM), Fourier Transform Infrared (FTIR), UV- Visible (UV-VIS) dan Electron Spin Resonance (ESR). Hasil karakterisasi EDX, FTIR dan ESR telah mengkonfirmasi berhasilnya doping atom Cu pada seluruh sampel. Hasil XRD menunjukkan bahwa seluruh sampel memiliki struktur heksagonal wurtzite beserta nilai grain size dan strain dari masing-masing sampel. Morfologi sampel ditunjukkan dari hasil FE-SEM yang menunjukkan permukaan sampel yang kasar. Hasil UV-Vis menunjukkan nilai celah pita energi yang berkurang dengan kehadiran doping logam Cu dan zeolit. Hasil uji fotokatalitik doping Cu sebanyak 7 at.% memiliki prosentase dekolorasi paling tinggi yaitu 77% sebanding dengan nilai rate tertinggi yaitu sebesar 0.0116 min-1.

Cu-doped ZnO Nanoparticles assisted by Zeolite were successfully synthesized by Co-precipitation method with four doping variations of Cu. Characterization of nanoparticle samples were investigated by Energy Dispersive X-ray (EDX), X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscope (FE-SEM), Fourier Transform Infrared (FTIR), UV- Visible (UV-VIS) dan Electron Spin Resonance (ESR). Characterizaton results of EDX, FTIR and ESR confirmed the doping of Cu in all samples. XRD results showed that all samples have hexagonal wutzite structure as well as grain size and strain calculations for each sample. Sample morphology was depicted by FE-SEM result showing the rough surface of sample. UV-Vis results showed the decreasing of the energy gap along with the loading of copper doping and zeolite. Photocatalytic activity result of Cu doping of 7 at% has the highest decolorization percentage of 77% which proportional to the highest rate constant of 0.0116 min-1.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S54011
UI - Skripsi Membership  Universitas Indonesia Library
cover
Najmawati Sulaiman
"ABSTRAK
Nama : Najmawati SulaimanProgram Studi : S2 Ilmu KimiaJudul : Sintesis Nanomaterial La2O3-NiO Menggunakan Ekstrak Daun Ciplukan dan Aktivitas Fotokatalitiknya terhadap Methyl OrangePembimbing : Dr. Yoki Yulizar, M.Sc. Pendekatan konvensional telah dilakukan untuk mensintesis dan meningkatkan kinerja La2O3. Akan tetapi, sintesis nanopartikel La2O3 masih menggunakan metode konvensional yang melibatkan bahan kimia yang berbahaya dan tidak ramah lingkungan. Untuk itu, diperlukan pendekatan green synthesis menggunakan ekstrak tanaman yang ramah lingkungan, aman, tidak berbahaya dan terjangkau. Aktivitas fotokatalitik NPs La2O3 dapat ditingkatkan dengan cara memodifikasi NPs La2O3 dengan NPs NiO secara in-situ membentuk nanomaterial La2O3-NiO. Ekstrak daun ciplukan Physalis Angulata mengandung alkaloid yang berperan sebagai sumber basa, flavonoid, saponin, polifenol yang berfungsi sebagai pengstabil dalam sintesis nanopartikel La2O3 dan La2O3-NiO. NPs NiO juga disintesis sebagai variabel kontrol. Penelitian ini bertujuan untuk mensintesis dan mengkarakterisasi NPs La2O3 dan La2O3-NiO menggunakan ekstrak daun ciplukan serta mengamati aktivitas fotokatalitiknya terhadap Methyl Orange.Hasil sintesis NPs La2O3 dan La2O3-NiO dianalisis dengan spektroskopi FTIR, spektroskopi raman, XRD, spektroskopi UV-Vis-DRS, PSA, SEM-EDX dan TEM-SAED. Adanya vibrasi logam dengan oksigen M-O pada bilangan gelombang 400 cm-1 mengindikasikan pembentukan NPs La2O3 sedangkan pada 418 dan 514 cm-1 dari spektra FTIR menunjukkan terbentuknya nanomaterial La2O3-NiO. Empat pita pada 454, 405, 340 dan 284 cm-1 merupakan mode vibrasi raman untuk La2O3. Pergeseran raman pada 380 dan 96,7 cm-1 menegaskan munculnya mode vibrasi spesifik untuk nanomaterial La2O3-NiO. Pola XRD menunjukkan La2O3 berstruktur kubik dengan space group Ia-3 dan La2O3-NiO diasumsikan berbentuk ortorombik dengan space group Pncb. Nilai band gap NPs La2O3 dan La2O3-NiO berturut-turut sebesar 5,390 dan 3,410 eV dengan distribusi ukuran partikel untuk La2O3 sekitar 87,38 nm dan untuk La2O3-NiO sekitar 100,2 nm. Morfologi SEM NPs La2O3 berbentuk nano-chip dengan ukuran berdasarkan TEM yaitu 30-40 nm sedang La2O3-NiO berbentuk bulatan dengan ukuran berdasarkan TEM sekitar 25-35 nm.Aktivitas fotokatalitik NPs La2O3 dan nanomaterial La2O3-NiO terhadap MO dilakukan baik dibawah penyinaran cahaya UV maupun pada keadaan gelap sebagai perbandingan dan menunjukkan bahwa 92,01 MO terdegradasi di bawah sinar UV dan 64,64 MO teradsorpsi pada kondisi gelap selama 180 menit. Dapat disimpulkan bahwa nanomaterial La2O3-NiO memiliki potensi sebagai fotokatalis yang efisien dalam mendegradasi zat warna, MO. Kata Kunci :Green synthesis, nanopartikel La2O3, nanomaterial La2O3-NiO, Physalis angulata, fotokatalitik, Methyl Orangexvi 68 hlm : 46 gambar, 9 tabel, 10 lampiranBibliografi : 43 1972-2018

ABSTRACT
Name Najmawati Sulaiman Study Program Magister of ChemistryTitle Synthesis of La2O3 NiO Nanomaterial Using Physalis Angulata Leaf Extract and Its Photocatalitic Activity on Methyl OrangeSupervisor Dr. Yoki Yulizar, M.Sc. A conventional approach has always been applied to synthesize and improve La2O3 performance. However, La2O3 nanoparticles synthesis still uses conventional methods involving harmful and non environmentally friendly chemicals. Therefore, it needs a green synthesis approach using plant extracts that are environmentally friendly, safe, harmless and affordable. The photocatalytic performance of La2O3 NPs can be enhanced by modifying the La2O3 NPs with NiO NPs in situ to obtain La2O3 NiO nanomaterials. Ciplukan leaf extract Physalis angulata contains alkaloids that can perform as a base source and the flavonoids, saponins, polyphenols can act as stabilizers for the formation of La2O3 and La2O3 NiO nanomaterials. NiO NPs are also synthesized as control variables. This study aimed to synthesize and characterize NPs La2O3 and La2O3 NiO using ciplukan leaf extract and observed its photocatalytic activity toward methyl orange.The synthesis products of La2O3 and La2O3 NiO NPs were analyzed by FTIR spectroscopy, raman spectroscopy, XRD, UV Vis DRS spectroscopy, PSA, SEM and TEM SAED. The presence of metal vibrations with oxygen M O at 400 cm 1 indicates the formation of La2O3 NPs while at 418 and 514 cm 1 of the FTIR spectra showed the formation of La2O3 NiO nanomaterial. Four bands at 454, 405, 340 and 284 cm 1 are the raman vibration modes for La2O3. Raman shifts at 380 and 96.7 cm 1 confirmed the result of specific vibration modes for La2O3 NiO NPs. The XRD pattern showed La2O3 in cubic structure with the Ia 3 and La2O3 NiO was assumed as orthorhombic structure with Pncb space groups. The band gap values of NPs La2O3 and La2O3 NiO were 5.39 and 3.410 eV respectively with the particle size distribution for La2O3 of about 87.38 nm and for La2O3 NiO of about 100.2 nm. The morphology of La2O3 NPs was nanochip shaped with a TEM based size of 30 40 nm while La2O3 NiO is spherical with a TEM based size of about 25 35 nm.The photocatalytic activity of NPs La2O3 and La2O3 NiO on MO was performed either under UV light irradiation or in the dark as a comparison and showed that 92.01 of MO was degraded under UV light and in the dark 64.64 of MO was adsorbed for 180 min. It can be concluded that La2O3 NiO nanomaterials has potential as an efficient photocatalyst in degrading MO. Keywords Green synthesis, La2O3 nanoparticles, La2O3 NiO nanomaterial, Physalis angulata, photocatalitic, Methyl Orange xvi 68 pages 46 figures, 9 tables, 10 attachmentsBibliography 43 1972 2018 "
2018
T49601
UI - Tesis Membership  Universitas Indonesia Library