Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 3 dokumen yang sesuai dengan query
cover
"Parameter polimerisasi pada fasa aqueous yang berpengaruh pada sifat-sifat film polimer dipelajari lebih lanjut untuk memungkinkan kontrol tak langsung pembuatan film dengan cara mengontrol fasa aqueous. Di antara parameter-parameter yang dipelajari adalah konsentrasi HCl, rasio APS/o-toluidin, lama polimerisasi, dan suhu. Konsentrasi HCl optimal pada nilai berlebih 1,0M, sementara rasio APS/o-toluidin optimal pada nilai 1,25. Lama polimerisasi ternyata berpengaruh pada kestabilan dan ketebalan. Secara umum, semakin lama waktu polimerisasi, film yang dihasilkan akan semakin tebal dan stabil. Suhu juga berpengaruh pada pengaturan ketebalan film. Meski data yang diperoleh baru bersifat semi kuantitatif, terdapat indikasi yang jelas bahwa kontrol tak langsung pembuatan film o-toluidin sangat dimungkinkan.

O-toluidine Polymerization in Aqueous Phase and Its Development to Produce In Situ Poly-o-toluidine Films. Polymerization parameters of aqueous phase which have an effect to polymer film were studied in order to establish indirect control of film fabrication by means of controlling the parameters of aqueous phase. Among the parameters studied are the concentration of HCl, APS/o-toluidine ratio, polymerization duration, and temperature. HCl concentration was found to be optimum at the excess value of 1.0M, whereas ratio of APS/o-toluidine at 1.25. Polymerization duration was found of having an effect to both stability and thickness. As a rule, longer duration of polymerization leads to a thicker and more stablized polymer film. Temperature was found to be a parameter that have a defining role in the control of film thickness. Despite of the rather semi quantitative nature of the data, the results show a clear indication that indirect control is possible for in situ method of o-toluidin film fabrication."
Depok: Lembaga Penelitian Universitas Indonesia, 2006
AJ-Pdf
Artikel Jurnal  Universitas Indonesia Library
cover
"Film poli-o-toluidin yang memiliki pelekatan yang kuat pada substrat non polar dikaji kegunaannya sebagai sensor optis pH. Karakterisasi terhadap film pada berbagai nilai pH dilakukan dengan memantau kurva absorbansinya mengunakan alat spektrofotometer Uv-Vis (ultra violet-visibel). Dalam penelitian ini ditemukan bahwa daerah kerja film poli-o-toluidin yang dibuat pada berbagai kondisi berada pada nilai pH 2,0- 6,0. Dengan menggunakan hubungan logaritmik antara absorbansi terhadap pH, daerah kerja film poli-o-toluidin dapat diperluas menjadi 2,0 - 8,0. Sensitivitas tertinggi respons terhadap pH diperoleh pada film poli-o-toluidin yang dibuat pada HCl 1,0 M dan pada waktu perendaman 12 jam. Penelitian juga mengkaji efek histeresis film dalam responsnya terhadap pH. Dari kajian tersebut, ditemukan bahwa film poli-o-toluidin sukar untuk dikembalikan pada bentuk awalnya. Hal inilah yang kemudian menjadikan film poli-o-toluidin hanya cocok untuk sekali penggunaan.

The Influence of Polymerization Condition to Optical Properties of Poly-o-toludine Films for PH Sensor Application. Properties of poly-o-toludine film strongly bonded to non polar substrate was studied for application as optical pH sensor. Characterization of film in various pH value is carried out by recording absorbance curve using uv-visible spectrophotometer. All poly-o-toluidine film was then found to be applicable as optical pH sensor in the pH range of 2.0- 6.0. Further computational processing by means of curve fitting into logaritmic trend will allow expansion of measurement to the pH range of 2.0-8.0. Sensitivity of pH response was highest in poly-o-toluidine film fabricate at HCl 1.0 M and at 12 hours of dipping time. This paper also studied hysteresis effect in pH response. It was concluded that poly-o-toluidine salt exposed to basic pH will not be easily regenerated. For this reason, poly-o-toluidine film will only be suitable for single usage of pH measurement."
Depok: Universitas Indonesia, 2006
AJ-Pdf
Artikel Jurnal  Universitas Indonesia Library
cover
Diandra Andina Ratimanjari
"Penderita diabetes banyak mengkombinasi antidiabetes herbal dan sintetis untuk mendapatkan efek sinergis atau aditif tanpa menginformasikan terlebih dahulu kepada praktisi kesehatan, seperti penggunaan sambiloto dan glibenklamid. Tujuan penelitian ini untuk mengetahui pengaruh pemberian infusa herba sambiloto terhadap glibenklamid dalam menurunkan kadar glukosa darah tikus putih jantan yang dibuat diabetes. Penelitian ini menggunakan 24 ekor tikus putih jantan Sparague-Dawley yang dibagi menjadi 6 kelompok, yaitu kontrol normal dan kontrol diabetes diberi larutan CMC 0,5% 1 ml/200 g bb tikus, kontrol glibenklamid diberikan suspensi glibenklamid 0,9 mg/200 g bb tikus, kontrol sambiloto diberikan infusa herba sambiloto 50 mg/200 g bb tikus, dan 2 kelompok interaksi diberikan infusa herba sambiloto dengan 2 variasi dosis (50 mg dan 100 mg/200 g bb tikus) dan suspensi glibenklamid 0,9 mg/200 g bb tikus, masing - masing diberikan secara per oral. Semua kelompok diinduksi aloksan 32 mg/200 g bb tikus, kecuali kontrol normal. Pengukuran kadar glukosa darah dilakukan 2 jam dan 4 jam setelah pemberian dengan metode o-toluidin. Hasil penelitian menunjukkan bahwa infusa herba sambiloto 100 mg/200 g bb tikus memberikan pengaruh signifikan terhadap glibenklamid dalam menurunkan kadar glukosa darah setelah satu minggu pemberian.

Many diabetics perform self-medication with antidiabetic herbs and synthetic drugs with the aim to obtain a synergistic or additive effects without informing their primary physician, such as the use of creat and glibenclamide. This research was carried out to know the impact of creat herb infusion on glibenclamide in lowering blood glucose levels on diabetic male albino rats. This study used 24 male Sparague-Dawley rats, which are divided into 6 groups, normal control and diabetic control were given 0,5% CMC solution 1 ml/200 g bw of rat, glibenclamide control were given glibenclamide suspension 0,9 mg/200 g bw of rat, creat control were given creat herb infusion 50 mg/200 g bw of rat, and 2 interaction groups were given creat herb infusion in 2 variant doses (50 and 100 mg/200 g bw of rat) and glibenclamide suspension 0,9 mg/200 g bw of rat, each of them were administrated orally. All of groups were induced with alloxan 32 mg/200 g bw of rat except normal control. Blood glucose was measured by o-toluidine method at 2 hours and 4 hours after administration. The result showed that the creat herb infusion at 100 mg/200 g bw gave significant impact on glibenclamide in lowering blood glucose levels a week after administration."
Depok: Fakultas Farmasi Universitas Indonesia, 2011
S56
UI - Skripsi Open  Universitas Indonesia Library