Hasil Pencarian  ::  Simpan CSV :: Kembali

Abstrak :
Krisis air bersih masih menjadi permasalahan di berbagai belahan bumi. Oleh karena itu, diperlukan teknologi destilasi air yang mudah dibuat, digunakan, dan terjangkau. Sistem evaporasi fototermal hadir sebagai solusi dalam mengatasi krisis air, dengan menggunakan energi terbarukan yaitu matahari. Logam transisi decalchogenides (TMD) menjadi bahan yang banyak digunakan sebagai material fototermal, seperti molybdenum disulfide (MoS2) dan molydenum trioxide dengan fase orthorombik (α-MoO3) yang telah terbukti memiliki kinerja yang baik. Dalam penelitian ini, kami mengusulkan material CC-MoO3 dengan pengunaan fase lain MoO3 yaitu fase hexagonal (h-MoO3) dan fase transisi hexagonal-orthorombik. Penumbuhan MoO3 dilakukan dengan metode hidrotermal pada subtrat carbon cloth (CC) yang memiliki desain 3D dan berpori, sehingga MoO3 dapat tumbuh pada setiap serat dan desain berpori ini memudahkan transportasi. Durasi sintesis dilakukan selama 6, 9, dan 12 jam pada suhu 130⁰C. Hasil pengujian kinerja sistem evaporasi fototermal menunjukkan bahwa sampel CC-MoO3 6 jam memiliki kinerja terbaik, dengan laju evaporasi 1,59 kg/m2h dan efisiensi energinya sebesar 98,93% dibawah pencayahan 1 sun. Akhirnya, pengurangan durasi sintesis dapat meningkat kinerja MoO3 sebagai material fototermal dengan memanfaatkan ukuran partikel microrods yang besar sehingga terbentuk jalur uap yang efektif untuk memperoleh air bersih. Disisi lain, penambahan durasi sintesis yang bertambah menyebabkan fase orthorombik menutupi jalur mikro pada CC-MoO3 yang mengurangi kinerja evaporasi. ...... The clean water crisis continues to be a problem in various parts of the world. Therefore, the development of easy-to-make, user-friendly, and affordable water distillation technology is necessary. Photothermal evaporation systems have emerged as a solution to address the water crisis by harnessing renewable energy from the sun. Transition metal dichalcogenides (TMDs), such as molybdenum disulfide (MoS2) and molybdenum trioxide with an orthorhombic phase (α-MoO3), have been widely used as photothermal materials due to their proven performance. In this study, we propose the development of CC-MoO3 material, utilizing alternative phases of MoO3, namely the hexagonal phase (h- MoO3) and the hexagonal-orthorhombic transition phase. The growth of MoO3 was conducted through hydrothermal synthesis on a 3D porous carbon cloth (CC) substrate, allowing MoO3 to grow on each fiber and facilitating transport. The synthesis duration was set at 6, 9, and 12 hours at a temperature of 130⁰C. The performance testing of the photothermal evaporation system revealed that the CC-MoO3 sample synthesized for 6 hours exhibited the best performance. It achieved an evaporation rate of 1.59 kg/m2h and an energy efficiency of 98.93% under 1 sun illumination. Reducing the synthesis duration improved the performance of MoO3 as a photothermal material by utilizing larger microrod particle sizes, which facilitated the formation of an effective vapor path for obtaining clean water. On the other hand, increasing the synthesis duration resulted in the orthorhombic phase covering the microchannels of CC-MoO3, which adversely affected the evaporation performance.

Abstrak :
Dalam beberapa tahun terakhir, sistem evaporasi fototermal telah menarik banyak perhatian sebagai solusi yang menjanjikan dalam mengatasi krisis air bersih. Sistem evaporasi fototermal memanfaatkan material fototermal yang dapat mengkonversikan sinar matahari menjadi panas untuk menguapkan air dimana uap air ini akan mengalami kondensasi untuk menghasilkan air bersih. Dalam karya tulis ini, digunakan Molibdenum disulfida (MoS2) sebagai material fototermal karena karakteristiknya yang memiliki spektrum penyerapan yang luas pada daerah cahaya tampak. Dalam upaya pengembanganya, diketahui bahwa MoS2 menunjukkan kinerja fototermal yang sangat baik. Melalui metode sintesis hidrotermal yang relatif sederhana, MoS2 dengan tingkat kemurnian yang tinggi dapat diperoleh. Di samping melakukan pengembangan melalui berbagai metode sintesis, pendekatan lain dapat dilakukan dengan meningkatkan sifat dari MoS2 itu sendiri melalui perlakuan UV/Ozone (UVO). Di sini, kami mengamati pengaruh waktu pemaparan radiasi UVO terhadap struktur, morfologi, sifat optik, dan kinerja MoS2 dalam proses evaporasi air. Hasil pengujian kinerja evaporasi sistem fototermal menunjukkan bahwa sampel MoS2 UVO-50 memiliki laju evaporasi tertinggi, yaitu sebesar 1,74. Laju evaporasi sampel MoS2 UVO-50 memiliki nilai 2,3 kali lebih tinggi apabila dibandingkan dengan laju evaporasi matriks ALP dan 1,27 kali lebih tinggi jika dibandingkan dengan sampel MoS2 tanpa pemberian UVO. Berdasarkan hasil ini, dapat disimpulkan bahwa radiasi UV/Ozone dapat meningkatkan kinerja MoS2 sebagai material fototermal yang dapat menyerap cahaya matahari dengan baik sehingga dapat dimanfaatkan dalam upaya pemerolehan air bersih. ......In the past few years, photothermal evaporation systems have attracted much attention as a promising solution in overcoming the clean water crisis. Photothermal evaporation systems utilize photothermal materials that are able to convert sunlight into heat in order to evaporate water, in which the generated vapor will eventually experience condensation to produce clean water. In this paper, Molybdenum disulfide (MoS2) is used as a photothermal material due to its nature of having a broad absorption spectrum in the visible light region. In its recent developments, it has been reported that MoS2 shows excellent photothermal performance. Through a relatively simple hydrothermal synthesis method, MoS2 with a high degree of purity can be obtained. Aside from modifying various synthesis methods as an attempt to elevate the system’s efficiency, considering another approach by improving the properties of MoS2 itself can be just as effective through implementing the UV/Ozone (UVO) treatment. Here, we observe the effect of the UVO treatment on the structure, morphology, optical properties, and the performance of MoS2 as a photothermal material during the process of water evaporation. The result of the evaporation performance evaluation shows that MoS<2 UVO-50 is able to produce the highest evaporation rate, which is 1.74. This number is 2.3 times higher when compared to its ALP matrix’s evaporation rate and 1.27 times higher than the evaporation rare of the sample that was not given the UVO treatment. Based on these results, it can be concluded that the UV/Ozone treatment has succeeded in improving the performance of MoS2 as an excellent sunlight absorber which can be utilized to ensure fruitful efforts in producing clean water.

Abstrak :
Konversi energi surya ke panas merupakan metode penting untuk pembangkit listrik, pemurnian air dan desalinasi dengan menggunakan material fototermal. Sistem evaporasi fototermal memanfaatkan material fototermal yang dapat mengkonversikan sinar matahari menjadi panas untuk menguapkan air. Penguapan air yang digerakkan oleh tenaga surya adalah teknologi yang menjanjikan untuk pemurnian air dengan efisiensi tinggi dengan menyerap energi matahari dan diubah menjadi panas, dimana uap air ini akan mengalami kondensasi untuk menghasilkan air bersih. Disini, digunakan Molibdenum disulfida (MoS2) sebagai material fototermal karena karakteristiknya yang memiliki spektrum penyerapan yang luas pada daerah cahaya tampak. Dalam upaya pengembanganya, diketahui bahwa MoS2 menunjukkan kinerja fototermal yang sangat baik dan dapat dihasilkan melalui metode sintesis hidrotermal yang relatif sederhana, melalui metode sintesis hidrotermal yang relatif sederhana, MoS2 dengan tingkat kemurnian yang tinggi dapat diperoleh. Di samping melakukan pengembangan melalui berbagai metode sintesis, pendekatan lain dapat dilakukan dengan meningkatkan sifat dari MoS2 itu sendiri melalui perlakuan doping Cobalt. Di sini, kami mengamati pengaruh doping Co terhadap mikrostruktur, morfologi, sifat optik, dan kinerjanya dalam proses evaporasi air. Hasil pengujian kinerja evaporasi sistem fototermal menunjukkan bahwa sampel Co:Mo 1:10 memiliki laju evaporasi tertinggi, yaitu sebesar 2,65 kg/m2h. Laju evaporasi sampel Co:Mo 1:10 memiliki nilai 1,6 kali lebih tinggi apabila dibandingkandengan laju evaporasi matriks ALP dan 1,1 kali lebih tinggi jika dibandingkan dengan sampel MoS2 tanpa doping Cobalt. Berdasarkan hasil ini, dapat disimpulkan bahwa doping Cobalt dapatmeningkatkan kinerja MoS2 sebagai material fototermal yang dapat menyerap cahaya matahari dengan baik sehingga dapat dimanfaatkan dalam upaya pemerolehan air bersih. ...... Converting solar energy to heat is an important method for power generation, water purification and desalination using photothermal materials. Photothermal evaporation systems utilize photothermal materials that can convert sunlight into heat to evaporate water. Solar powered evaporation is a promising technology for high-efficiency water purification by absorbing solar energy and converting it into heat, where this water vapor condenses to produce clean water. Here, Molybdenum disulfide (MoS2) is used as a photothermal material because of its characteristic which has a broad absorption spectrum in the visible light region. In its development efforts, It is known that MoS2 exhibits very good photothermal performance and can be produced by a relatively simple hydrothermal synthesis method, MoS2 with a high level of purity can be obtained. In addition to developing through various synthesis methods, another approach can be taken by improving the properties of MoS2 itself through Cobalt doping treatment. Here, we observe the influence of Co doping on its microstructure, morphology, optical properties and performance in the water evaporation process. The results of the photothermal system evaporation performance test showed that the Co:Mo 1:10 sample had the highest evaporation rate, which was 2,65 kg/m2h. The evaporation rate of the Co:Mo 1:10 sample has a value of 1,6 times higher when compared to the evaporation rate of the ALP matrix and 1,1 times higher when compared to MoS2 samples without Cobalt doping. Based on these results, it can be concluded that Cobalt doping can improve MoS2 performanceas a photothermal material that can absorb sunlight well so that it can be used in efforts to obtain clean water.

Abstrak :
This book highlights the theoretical foundations of and experimental techniques in photothermal heating and applications involving nanoscale heat generation using gold nanostructures embedded in various media. The experimental techniques presented involve a combination of nanothermometers doped with rare-earth atoms, plasmonic heaters and near-field microscopy. The theoretical foundations are based on the Maxwells and heat diffusion equations. In particular, the working principle and application of AlGaN:Er3+ film, Er2O3 nanoparticles and β-NaYF4:Yb3+,Er3+ nanocrystals for nanothermometry based on Er3+ emission are discussed. The relationship between superheated liquid and bubble formation for optically excited nanostructures and the effects of the surrounding medium and solution properties on light absorption and scattering are presented. The application of Er2O3 and β-NaYF4:Yb3+,Er3+ nanocrystals to study the temperature of optically heated gold nanoparticles is also presented. In closing, the book presents a new thermal imaging technique combining near-field microscopy and Er3+ photoluminescence spectroscopy to monitor the photothermal heating and steady-state sub-diffraction local temperature of optically excited gold nanostructures.

Abstrak :
This book highlights the theoretical foundations of and experimental techniques in photothermal heating and applications involving nanoscale heat generation using gold nanostructures embedded in various media. The experimental techniques presented involve a combination of nanothermometers doped with rare-earth atoms, plasmonic heaters and near-field microscopy. The theoretical foundations are based on the Maxwell’s and heat diffusion equations. In particular, the working principle and application of AlGaN:Er3+ film, Er2O3 nanoparticles and β-NaYF4:Yb3+,Er3+ nanocrystals for nanothermometry based on Er3+ emission are discussed. The relationship between superheated liquid and bubble formation for optically excited nanostructures and the effects of the surrounding medium and solution properties on light absorption and scattering are presented. The application of Er2O3 and β-NaYF4:Yb3+,Er3+ nanocrystals to study the temperature of optically heated gold nanoparticles is also presented. In closing, the book presents a new thermal imaging technique combining near-field microscopy and Er3+ photoluminescence spectroscopy to monitor the photothermal heating and steady-state sub-diffraction local temperature of optically excited gold nanostructures.