Hasil Pencarian  ::  Simpan CSV :: Kembali

Abstrak :
Pengembangan lapangan gas bumi baru setelah ditemukan memerlukan desain pabrik pengolahan gas bumi, termasuk di Lapangan X. Selain desain proses, desain kontrol proses juga sangat penting. Untuk itu, pada pemisahan awal gas bumi yang akan diproses lebih lanjut, dirancang pengendalian proses menggunakan pengontrol proporsional-integral berbasis sistem identifikasi ulang (PI-SRI). Terdapat tiga sumur (Alpha, Betha, dan Charlie), separator dan cooler pada proses pemisahan awal dan terdapat tiga jenis kontroler (tekanan [PC], level [LC] dan temperatur [TC]). Untuk menentukan parameter kontroler PI yang optimal, dilakukan tiga kali identifikasi sistem untuk menghasilkan tiga model first-order plus dead-time (FOPDT). Ketiga model tersebut dimasukkan dalam persamaan tuning untuk metode Ziegler-Nichlos sehingga dihasilkan tiga parameter kontroler PI. Untuk menguji kinerja kendali yang optimal digunakan perubahan set point (SP) pada PC, LC dan TC, serta gangguan berupa perubahan laju aliran gas bumi yang berasal dari ketiga sumur tersebut. Indikator kinerja pengendalian yang digunakan adalah overshoot dan settling time. Hasil penelitian menunjukkan bahwa model FOPDT untuk proses pemisahan awal produksi gas bumi berdasarkan tiga variabel terkontrol memiliki =−1,614, =0,24 dan =0,01 untuk PC; =−0.882, =0.2295 dan =0.2385 untuk LC dan =−0.063, =1.5075 dan =0.0425 untuk TC. Harga parameter kontroler PI yang memberikan performansi kontrol optimum (overshoot dan settling time) adalah =−13,383, =0,033 untuk PC; =−132.6, =0.483 untuk LC, dan =−506.7, =0.142 untuk TC. ......The development of a new natural gas field after being discovered requires the design of a natural gas processing plant, including in Field X. In addition to process design, process control design is also very important. For this reason, at the initial separation of natural gas which will be further processed, process control is designed using a proportional-integral controller based on a re-identification system (PI-SRI). There are three wells (Alpha, Betha, and Charlie), separator and cooler in the initial separation process and there are three types of controllers (pressure [PC], level [LC] and temperature [TC]). To determine the optimal PI controller parameters, three system identifications were carried out to produce three first-order plus dead-time (FOPDT) models. The three models are included in the tuning equation for the Ziegler-Nichlos method so that three PI controller parameters are produced. To test the optimal control performance, changes in the set point (SP) of the PC, LC and TC are used, as well as disturbances in the form of changes in the flow rate of natural gas originating from the three wells. The control performance indicators used are overshoot and settling time. The results showed that the FOPDT model for the initial separation process of natural gas production based on three controlled variables had =−1.614, =0.24 and =0.01 for PC; =−0.882, =0.2295 and =0.2385 for LC and =−0.063, =1.5075 and =0.0425 for TC. The parameter values ​​for the PI controller that provide optimum control performance (overshoot and settling time) are =−13,383, =0.033 for PC; =−132.6, =0.483 for LC, and =−506.7, =0.142 for TC.

Abstrak :
Universitas Indonesia Culture Collection (UICC) memiliki koleksi strain-strain Rhizopus oryzae Went dan Prinsen Geerligs yang diisolasi dari tempe dan telah diidentifikasi berdasarkan karakter fenotipik (morfologi dan fisiologi). Tujuan penelitian adalah melakukan re-identifikasi lima strain R. oryzae (UICC 10, UICC 85, UICC 119, UICC 120, dan UICC 135) berdasarkan data sequence daerah internal transcribed spacers ribosomal DNA dan analisis filogenetik untuk memperoleh identitas spesies yang akurat. Amplifikasi dan sequencing daerah ITS rDNA dilakukan menggunakan primer forward ITS 5 dan primer reverse ITS 4. Data sequence dikirim ke database DNA GenBank untuk pencarian homologi dengan program BLAST. Sequence alignment dilakukan menggunakan program Clustal X. Konstruksi pohon filogenetik dilakukan menggunakan metode Neighbor Joining, model dua parameter Kimura, dan nilai bootstrap 1000 kali pengulangan. Karakterisasi morfologi dan pengujian kemampuan tumbuh pada variasi suhu dilakukan untuk mendukung hasil re-identifikasi dan melengkapi deskripsi strain masing-masing. Hasil amplifikasi daerah ITS rDNA menunjukkan bahwa kelima strain R. oryzae UICC memiliki panjang fragmen dengan ukuran 600--700 pb. Hasil pencarian homologi BLAST menunjukkan bahwa kelima strain memiliki homologi 99,8% terhadap type strain R. oryzae CBS 112.07T. Hasil analisis filogenetik menunjukkan bahwa kelima strain berada dalam satu grup yang monofiletik dengan strain tipe R. oryzae CBS 112.07T dan strain-strain R. oryzae dari database DNA GenBank, dengan dukungan nilai bootstrap yang tinggi (84%). Re-identifikasi lima strain R. oryzae UICC secara molekuler menghasilkan identitas spesies yang sama, yaitu sebagai R. oryzae, dan didukung oleh karakter morfologi dan fisiologi. ...... Universitas Indonesia Culture Collection (UICC) has collection of Rhizopus oryzae Went and Prinsen Geerligs strains, which were isolated from tempeh. These strains were identified based on phenotypic characters (morphology and physiology). The aim of this study was to re-identify five strains of R. oryzae (UICC 10, UICC 85, UICC 119, UICC 120, and UICC 135), based on internal transcribed spacers (ITS) region of ribosomal DNA sequence data to obtain accurate identification at species level. Amplification and sequencing of ITS region of rDNA were performed using primer set, forward primer ITS 5 and reverse primer ITS 4. The sequence data was sent to GenBank DNA database for homology search using BLAST. Sequence alignment was carried out using Clustal X. Construction of phylogenetic tree was performed using Neighbor Joining method, Kimura's two parameter model and bootstrap values of 1000 iterations. Characterization of the five strains based on morphology and growth ability at temperature variations were carried out to support the description of each strain. Amplification result showed that the strains have fragment length of ITS region of rDNA about 600--700 bp. Results of BLAST homology search of the strains showed a very high similarity (99.8%) to the type strain R. oryzae CBS 112.07T. Phylogenetic tree showed that the five strains were clustered together in a monophyletic group with the type strain R. oryzae CBS 112.07T and other R. oryzae strains from GenBank DNA database, and supported by high bootstrap value (84%). Re-identification of five strains of R. oryzae UICC based on molecular method showed that they were identified as R. oryzae, similar to previous identification, and supported by morphological and physiological characterization.

Abstrak :
This book offers a comprehensive introduction to advanced methods for image and video analysis and processing. It covers deraining, dehazing, inpainting, fusion, watermarking and stitching. It describes techniques for face and lip recognition, facial expression recognition, lip reading in videos, moving object tracking, dynamic scene classification, among others. The book combines the latest machine learning methods with computer vision applications, covering topics such as event recognition based on deep learning，dynamic scene classification based on topic model, person re-identification based on metric learning and behavior analysis. It also offers a systematic introduction to image evaluation criteria showing how to use them in different experimental contexts. The book offers an example-based practical guide to researchers, professionals and graduate students dealing with advanced problems in image analysis and computer vision.