Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 2 dokumen yang sesuai dengan query
cover
Muhammad Erfinza
"ABSTRAK
Antena radar VTS harus memiliki spesifikasi tertentu seperti gain yang tinggi, beamwidth yang sempit, dan side lobe level yang rendah. Salah satu jenis antena yang dapat digunakan untuk aplikasi radar VTS adalah antena mikrostrip. Untuk memenuhi spesifikasi VTS, antena mikrostrip harus dirancang dengan teknik array agar nilai gain naik dan beamwidth menyempit. Untuk menurunkan nilai side lobe level, diperlukan distribusi amplitudo yang berbeda-beda untuk setiap bagian antena array. Pembagian distribusi amplitudo dilakukan menggunakan teknik Distribusi amplitudo triangular. Implementasi dari distribusi amplitudo tersebut adalah perancangan unequal power divider dengan cara membagi suatu saluran stripline menjadi dua jalur dengan lebar yang berbeda. Unequal power divider ini dirancang untuk mencatu antena array 6x32 elemen chebyshev yang berasal dari susunan horizontal antena array 1x6 elemen pada frekuensi 9,4 GHz. Hasil simulasi antena array 6x32 elemen menunjukkan return loss < -15 dB, gain > 20 dB, beamwidth vertikal < 20o, beamwidth horizontal < 4o, side lobe level < -26 dB baik pada arah horizontal maupun vertikal. Hasil pengukuran menunjukkan power divider dan antena sudah bekerja pada frekuensi 9,4 Ghz dengan bandwidth, gain, beamwidth dan side lobe level bernilai masing-masing 170 MHz, 14,4 dB, 3,7o dan -14 dB.

ABSTRAK
The VTS radar antenna should have particular specifications such as high level of gain, narrow beamwidth and low level of side lobe. One of the antenna which could be used for the application of VTS radar is microstrip antenna. To fulfill the specifications needed for VTS, the microstrip antenna must be designed with an array method in order to increase the value of the gain and narrower the beamwidth. To lower the level of side lobe, different distribution of amplitude is used for each section of array antenna. The amplitude distribution is done by using triangular amplitude distribution technique. Implementation of the amplitude distribution is an unequal power divider which designed by dividing a stripline channel into two lines with different widths. The power divider is used to feed 6x32 element array which was arranged horizontally from 1x6 element in the frequency of 9.4 GHz. Simulation result for the array 6x32 antenna showed the value of return loss was < -15 dB, gain > 20 dB, vertical beamwidth < 20o, horizontal beamwidth < 4o and side lobe level < -26 dB in vertical and horizontal direction. The calculation result show that the power divider and the antenna work at 9.4 GHz frequency with bandwidth, gain, beamwidth and side lobe level were 170 MHz, 14.4 dB, 3.7o and -14 dB respectively"
2016
S65020
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Riza Darmawan
"Penelitian ini mengusulkan rancang bangun antena mikrostrip array linear dengan bentuk patch segiempat sebagai antena pencatu pada sistem antena parabola di stasiun bumi penerima data satelit Himawari-8. Antena dirancang bekerja pada rentang frekuensi 3,8-4,2 GHz. Simulasi menggunakan perangkat lunak CST Microwave Studio 2019. Antena mikrostrip array linear dirancang dengan menggunakan bahan substrat Rogers RT/Duroid-5880 dengan nilai konstanta dielektrik 2,2 yang mempunyai ketebalan 1,575 mm. Teknik dan metode yang digunakan yaitu teknik proximity coupled feed, teknik corporate feed, metode Dolph-Chebyshev, metode Wilkinson Unequal Power Divider, substrat double layer, dan juga Reflektor Parabola. Simulasi antena microstrip array 1x8 dengan bahan Rogers RT/Duroid-5880 menghasilkan bandwidth selebar 721,9 MHz pada frekuensi 3,7069 – 4,4288 GHz, gain sebesar 16,17 dB pada frekuensi 4,148 GHz, direktivitas sebesar 16,56 dB pada frekuensi 4,148 GHz, efisiensi sebesar 97,65%, Half Power Beamwidth (HPBW) untuk arah horizontal sebesar 6,5° dan HPBW untuk arah vertikal sebesar 46,5°, dan pola radiasi yang dihasilkan adalah direksional. Ketika antena antena mikrostrip array 1x8 bahan rogers RT/Duroid-5880 sebagai antena pencatu dengan Reflektor Parabola 2,4 meter menghasilkan bandwidth selebar 721,9 MHz pada frekuensi 3,7069 – 4,4288 GHz, gain sebesar 30,69 dB pada frekuensi 4,148 GHz, direktivitas sebesar 31,08 dB pada frekuensi 4,148 GHz, efisiensi sebesar 98,75%, Half Power Beamwidth (HPBW) untuk arah horizontal sebesar 7,7° dan HPBW untuk arah vertikal sebesar 1,4°, dan pola radiasi yang dihasilkan adalah direksional. Hasil pengukuran untuk antena mikrostrip 1x8 dengan bahan Rogers RT/Duroid-5880 memiliki bandwidth 44 MHz dari frekuensi 3,761-3,805 GHz dan memiliki bandwidth 92 MHz dari frekuensi 4,804-4,896 GHz, gain sebesar 10,42 dB pada frekuensi 3,8 GHz, dan pola radiasi yang dihasilkan adalah direksional.

This study proposes the design of a linear array microstrip antenna with a rectangular patch shape as a feed antenna for a parabolic antenna system at the Himawari-8 satellite data receiving earth station. The antenna is designed to work in the 3.8-4.2 GHz frequency range. Simulation using CST Microwave Studio 2019 software. Linear array microstrip antenna is designed using Rogers RT/Duroid-5880 as a substrate with a dielectric constant value of 2.2 which has a thickness of 1.575 mm. The techniques and methods used are proximity coupled feed technique, corporate feed technique, DolphChebyshev method, Wilkinson Unequal Power Divider method, double layer substrate, and also Parabolic Reflector. Simulation of a 1x8 microstrip array antenna with Rogers RT/Duroid-5880 material produces a bandwidth of 721.9 MHz at a frequency of 3.7069-4.4288 GHz, a gain of 16.17 dB at a frequency of 4.148 GHz, a directivity of 16.56 dB at a frequency of 4.148 GHz, efficiency of 97.65%, Half Power Beamwidth (HPBW) for the horizontal direction of 6.5° and HPBW for the vertical direction of 46.5°, and the resulting radiation pattern is directional. When the 1x8 rogers RT/Duroid-5880 microstrip array antenna as a feed antenna with a 2.4 meter Parabolic Reflector produces a bandwidth of 721.9 MHz at a frequency of 3.7069-4.4288 GHz, the gain is 30.69 dB at a frequency of 4.148 GHz, directivity of 31.08 dB at a frequency of 4.148 GHz, efficiency of 98.75%, Half Power Beamwidth (HPBW) for the horizontal direction of 7.7° and HPBW for the vertical direction of 1.4°, and the resulting radiation pattern is directional. The measurement results for a 1x8 microstrip array antenna with Rogers RT/Duroid-5880 material have a bandwidth of 44 MHz from a frequency of 3.761-3.805 GHz and a bandwidth of 92 MHz from a frequency of 4.804-4.896 GHz, a gain of 10.42 dB at a frequency of 3.8 GHz, and a pattern of he radiation produced is directional."
Depok: Fakultas Teknik Universitas Indonesia, 2021
T-pdf
UI - Tesis Membership  Universitas Indonesia Library