Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 2 dokumen yang sesuai dengan query
cover
Mohamad Fauzi Rachman
"Lindi merupakan cairan yang terbentuk oleh adanya air hujan yang merembes ke dalam timbunan sampah. Konsep keseimbangan air digunakan untuk menentukan timbulan lindi di suatu TPA. Dalam penentuan timbulan lindi, nilai field capacity (FC) sampah merupakan salah satu parameter yang menentukan terhadap banyaknya lindi yang terbentuk. Pemodelan lysimeter dalam penelitian ini dilakukan untuk mengetahui pengaruh resirkulasi lindi terhadap nilai FC sampah. Perhitungan nilai FC sampah skala laboratorium dilakukan dengan membandingan berat atau volumetrik air dengan berat atau volumetrik sampah pada lysimeter. Nilai FC sampah yang didapatkan selanjutnya digunakan untuk menghitung perkolasi lindi yang dihasilkan di TPA Cipayung selama setahun dengan menggunakan Metode Neraca Air Thornthwaite. Sampah pada penelitian ini diambil dari Pasar Kemiri Muka Depok. Penambahan asupan air sebagai simulasi air hujan dan terjadinya kebocoran pada lapisan geotekstil pada kedua lysimeter sebesar 1,4 L. Air lindi yang diresirkulasikan pada lysimeter 1 adalah 1,5 L. Penelitian ini menjadi penting dilakukan, karena dapat digunakan sebagai dasar pertimbangan untuk evaluasi pengolahan lindi yang ada di TPA Cipayung,terutama dalam hal penentuan potensi timbulan lindi dari landfill.
Hasil pemeriksaan menunjukkan bahwa nilai kadar air sampah awal pada lysimeter terbilang tinggi, yaitu sebesar 80,6 %. Nilai FC sampah pada lysimeter 1 yaitu sebesar 0,592 L/kg atau 59,2 % atau 276,53 mm/m, sementara pada lysimeter 2 nilainya adalah 0,449 L/kg atau 44,9 % atau 442,93 mm/m. Semakin tinggi nilai FC sampah, maka jumlah timbulan lindi menjadi kecil dan sebaliknya apabila nilai FC sampah kecil, timbulan lindi semakin besar. Total perkolasi lindi di TPA Cipayung selama setahun menggunakan nilai FC dari sampah pada lysimeter dengan resirkulasi lindi (lysimeter 1) adalah sebesar 1.210 mm. Total perkolasi menggunakan nilai FC dari sampah dengan lysimeter tanpa resirkulasi (lysimeter 2) adalah sebesar 1.211 mm. Tidak terlihat perbedaan nilai perkolasi lindi di TPA Cipayung dari bulan Januari-Agustus dan dari bulan Oktober-Desember. Perbedaan nilai perkolasi hanya terjadi pada bulan September yaitu sebesar 38 mm bila dengan menggunakan resirkulasi lindi dan 39 mm bila tanpa resirkulasi lindi). Hal tersebut dikarenakan data curah hujan, temperatur, dan koefisien run-off yang digunakan pada kedua lysimeter mempunyai nilai yang sama. Selain itu, adanya perbedaan ketinggian sampah pada kedua lysimeter yang mencapai 0,32 m diduga turut mempengaruhi besarnya hasil perkolasi lindi pada hasil perhitungan ini. Perlu adanya keseragaman susunan lapisan (capping) di dalam seluruh lysimeter, sehingga hasil yang didapat bisa lebih dibandingkan.

Leachate is a liquid that is formed by the rain water that seeps into the waste heap. The concept of the water balance is used to determine the generation of leachate in a landfill. In determining the leachate generation, the value of field capacity (FC) of waste can be used as one of the parameters. Lysimeter simulation is conducted to determine the effect of leachate recirculation to FC value. The value of FC is calculated by comparing between the water weight or volume with the waste weight or volume in the lysimeter. Furthermore, the value of FC is utilized to calculate leachate generated at Cipayung Landfill within a year by using Thornthwaite Water Balance Method. Solid waste that is utilized in this study was taken from Kemiri Muka traditional market-City of Depok. The amount of additional water into lysimeter is based on the amount of rainfall (precipitation) in Depok and the assumption of leakage rate of geotextile layer on the top of both lysimeter. Thus, 1.4 liter of water is supplied into both lysimeter and additional 1.5 liter of leachate supplied into one of lysimeter as leachate recirculation.Lysimeter 1 is appointed as lysimeter with leachate recirculation and lysimeter 2 is as lysimeter without leachate recirculation. This research is important because it can be used as a basis for evaluation on the existing leachate treatment at Cipayung Landfill especially in estimating of leachate quantity that is coming from landfill.
The results showed that the initial moisture content of waste in the lysimeter is approximately 80.6%. The value of FC of waste in lysimeter 1 and 2 is approximately 0.592 L/kg or 59.2% or 276.53 mm/m and 0.449 L/kg or 44.9% or 442.93 mm/m, respectively. The higher the value of FC of waste, the lower the amount of leachate volume generated, and vice versa. Total percolation of leachate at Cipayung Landfill within a year by using these both FC values is 1,210 mm with leachate recirculation and 1,211 mm without leachate recirculation. No visible difference in the amount of leachate percolation at Cipayung Landfill during January to August and October to December. The difference only occurred in September, which is 38 mm and 39 mm by using and not using leachate recirculation, respectively. These results took place due to the same value of rainfall and temperature data, and also the run-off coefficient that is utilized in both calculations. In addition, the difference in waste height on both lysimeter that reached 0.32 m supposedly influenced the amount of leachate generated. Therefore, for the next research, the entire lysimeter should be made on the same condition to obtain good and comparable results."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S46285
UI - Skripsi Membership  Universitas Indonesia Library
cover
Lady Chair Raza
"Proses produksi industri perminyakan terdiri dari proses primer dan proses sekunder yang menghasilkan limbah dengan kandungan fenol dan COD tinggi dengan konsentrasi berkisar antara 200,23-329,73 mg/L dan 960,24-1.196,58 mg/L. Adsorpsi merupakan salah satu alternatif pengolahan fisik untuk mengurangi zat pencemar di dalam air limbah yang memiliki desain sederhana dan mudah dalam pengoperasiannya. Pada penelitian ini, percobaan adsorpsi dilakukan secara batch dan kontinyu. Dari hasil penelitian, adsorpsi secara batch dapat mengurangi konsentrasi fenol dan COD mencapai 99,93% dan 94,49% dengan kombinasi dosis adsorben dan waktu kontak optimum 40 g/L dan 95 menit. Pada percobaan kontinyu didapatkan persentase penyisihan fenol 100-56%, COD 97-48%, amonia 100-71%, sulfida 100-5% dalam waktu operasi 235 jam. Efisiensi regenerasi dengan ethanol 100% untuk fenol dan 70% untuk COD. Data equilibrium adsorpsi fenol dan COD menunjukkan kecocokan dengan model isotherm Langmuir dan Freundlich. Data kinetika adsorpsi menunjukkan kecocokan dengan pseudo-second order model dengan nilai laju kinetika kfenol=1,247 g/mg/menit dan kCOD=0,0082 g/mg/menit. Aplikasi di lapangan membutuhkan 2 unit kolom adsorpsi dan 1 unit cadangan, dengan diameter 2 m dan tinggi total 6,5 m.
......
The production process of petroleum industry consists of primary processing and secondary processing that produce waste with a high content of phenol and COD concentrations ranging between 200,23-329,73 mg/L dan 960,24-1.196,58 mg/L. Adsorption is a physical treatment alternative for reducing pollutants in wastewater which has a simple design and easy in operation. In this study, the adsorption experiments performed in batch and continuous. From the result of this research, batch adsorption can reduce the concentration of phenol and COD in wastewater of petroleum industry up to 99,93% and 94,49% with a combination of adsorbent dosage and optimum contact time each of 40 g/L and 95 minutes. he continuous experiments removed 100-56% of phenol, 97-58% of COD, 100-71% of ammonia, 100-5% sulfide in 235 hours operation. Efficiency of regeneration using ethanol up to 100% of phenol and 70% of COD. Adsorption equilibrium data of phenol and COD were best fitted by Langmuir and Freundlich isotherm models. Adsorption kinetics data were best fitted by the pseudo-second order kinetics model with a rate value kfenol=1,247 g/mg/menit and kCOD=0,0082 g/mg/menit. Applications in the field required 2 column adsorption units and 1 reserve unit with a diameter of 2 m and a total height of 6,5 m."
Depok: Fakultas Teknik Universitas Indonesia, 2015
S59437
UI - Skripsi Membership  Universitas Indonesia Library