Hasil Pencarian  ::  Simpan CSV :: Kembali

"Contents :

• Foreword
• Surface Modifications in Aerospace Applications
• In Situ Formation of Titanium Carbide by Reactive Plasma Spraying with Elemental Titanium Powder
• A Comparative Study of Mechanical Properties and Residual Stress Distributions of Copper Coatings Obtained by Different Thermal Spray Processes
• Damage Progression in Thermal Barrier Coatings During Four-Point Bend Tests with Acoustic Emission Monitor
• A Study of the Strength of Spray Coated Layer by Cross Sectional Electron Microscopy
• A Comparative Study of Different Plasma Sprayed Coatings Applied to Railway Disc Brakes
• Optimization and Monitoring of the Production of Thermal Barrier Coatings
• Benefits of Surface Preparation by Laser for Thermal Sprayed Coatings
• Fabrication of Ti02 Photocatalytic Coating by Thermal Spray Process
• Indentation Fracture Toughness and Interfacial Indentation Tests Associated with Acoustic Emission on WC-Co Coated Specimens
• Fatigue Processes in Bodies with Surface Coatings
• Laboratory Evaluation of Hot Erosion Resistance of Six Thermal Sprayed Coatings
• Vacuum Plasma Sprayed WC-12% Co Coatings: Optimization of Spraying Parameters and Subsequent Laser Treatment
• Optical Properties of Al Film Deposited on Polymer
• Slurry and Thermal Spray Coatings for Protection of New Generation Steam Engine Components
• Surface State Modifications in Powder Products Induced by a Spray-Coating Technique
• Relationship Between Dilution and Solidification Cracking in PTAW Ni-Base Superalloy Overlays
• A Novel Friction Thermomechanical Process for Surface Modification of Aluminum Castings
• Characterization and Modelling of Multilayer Ti-Based Coating
• Electrolytic Deposits on Stainless Steel as High Temperature Coatings
• Investigation of Ceramic Sol-Gel Thin Films for Wet Corrosion Protection of Mild Steel
• Need for Environmentally Friendly Surface Modification Technology in the Japanese Automotive Industry
• Development of Bioceramic Composites: Processing Solutions and In-Vitro Evaluations
• Wear of Ultra High Molecular Weight Polyethylene Sliding Against a CoCrMo Coating Applied by Physical Vapor Deposition
• Physico-Chemical and Mechanical Approaches to the Dentin-Resin Adhesive Interface
• Surface Quality of Master Screw Dental Implant
• Suspension Plasma Sprayed Hydroxyapatite Nano-Powder for Biomedical Application
• Ceramographic Analysis of Ceramo-Metal Bonding Interfaces
• A Nanoindentation Study of PVD WC/C Coatings Supported by Cross-Sectional Electron Microscopy Observations
• Effect of a Ni Interlayer on the Corrosion Behavior of CrN PVD Coating Deposited onto Plastic Mold Steels
• Structure of Diamond-Like Carbon Films Obtained by PECVD: XPS, X-Rays Reflectometry and Hardness Measurements
• Application of Surface Modified Silica Thin Films to Biosensors
• Surface Treatments and Coatings in the Steel-Making Industry: From Metallurgy to Processing
• Changes in Structure and Properties of AIN Thin Films Due to Surface Oxidation
• Carbo-Nitride Thin Films and Nanofibers Synthesized by HF-CVD
• Effect of Various Plasma Nitriding Procedures on Surface Characteristics of P/M Ledeburitic Tool Steels
• Characterization of PVD Ni Coatings Deposited at Various Conditions
• Challenges and Opportunities in Surface Engineering
• Correlations Between Surface Modification and Tribological Performance of Brake Pads
• Development of Novel Fe-Cr-C/NbC Composite Materials for Wear Resistant Coatings Using a Laser Rapid-Alloy-Prototyping Technique
• Dose Rate Influence on the Microstructure of Chromium Steels Subjected to Low-Energy Nitrogen Ion Implantation
• Effect of Coatings on Mechanical Properties and Fretting Fatigue Strength of a Titanium Alloy in Cryotechnical Environment
• Wear Behavior of Colored Stainless Steel
• Wear Analysis of Coated Carbide Tools when Machining Nickel Base, Inconel, Alloy
• Wear Modelling of Contact Plan/Plan Between Graphite and Titanium Alloy
• Wear Criterion for Cold Forging Tool
• Surface Modification of a FeCrAlY-Alloy by Ion Implantation and Oxidation for Potential Implant Applications
• Functionally Graded Materials Produced by Laser Cladding: A Novel Approach
• Improvement of Adhesive Properties of Polymers After Excimer Laser Irradiation
• Properties and Applications of Coatings Deposited by Laser Beam
• WC-Co Plasma Sprayed Coatings Partially Re-fused with Laser
• Modeling of Temperature Fields in Graphite Target at Pulsed Laser Deposition of CNx Films
• Laser Treatment of BN Pre-Coated Steels: Correlation of Hardness and Microstructure
• Surface Alloying of Ceramic Powders on F

"

"Contents :- Fifteenth International Conference on Surface Modification Technologies Indianapolis, Indiana November 5-8, 2001 - Foreword - Technical Sessions - The PROTAL Process: An Economical Alternative for Producing a Clean Interface in a Thermal Spraying Application - Application of In-Process Reaction to the Fabrication of MgAl2O2/Al-Si Composite Coating by HVOF Spraying - Finite Element Modeling of Coating Architectures for Aluminum Die Casting - Synthesis of Superlow Friction Carbon Films from Hydrogen Rich Acetylene Plasmas - Use of Advanced Soft-Metal Engineered Surfaces to Control Galling of Carbon Steel Bolts in Gasketed Joints at Elevated Temperatures - Fabrication and Characterization of TiB2/TiC and Tungsten Co-Sputtered Wear Resistant Coatings - Structure and Mechanical Properties of Magnetron Sputtered Coatings in the Ni- Al-N Ternary System - Correlation of Nitrogen Gas Processing Level to Structural and Tribological Properties of MoS2/Ti/N Solid Lubricated Coatings - Analysis of Composite Surfaces with the Atomic Force Microscope: A Problem Solving Approach - Characterization of Industrial Coatings with Atomic Force Microscopy - Study by Atomic Force Microscopy: Effect of the Doping Anion on the Surface Morphology of Polypyrrole Films - Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM): Complementary Techniques for High Resolution Surface Investigations - Electrodeposition of Polypyrrole on Aluminum Alloy - New Technology in Atomic Force Microscopy (AFM) for Faster Scanning Speeds and Shorter Time-to-Result - Formation of Bilayer Polypyrrole-Polyaniline Composite Coating for Corrosion Protection of Steel - Corrosion Protection of Al 2024-T3 by Particulate Filled Conducting Polymer Coatings - Experimental Determination of Interactions Between Molten Aluminum and Selected Die Coatings for Aluminum Pressure Die Casting - Laser Peening: Current Status and Future Outlook - Iron Aluminide Based Coating Deposited by High Energy Density Processes - Interfacial Adhesion of Laser Clad Functionally Graded Materials - Stability and Oxidation Resistance of Novel Metallic Fibers - Controlled Superficial Cracking of the Substrate to Enhance Adhesion of Plasma Sprayed Coatings - Residual Stresses in MoN and Mo2N Coatings Deposited by Arc PVD on High Speed Steel Substrate - A Study of Grain Boundary Precipitation During Plasma Nitriding of Steel - Overview of Alternative Technologies for Chromium and Cadmium - Role of Electroplated Chromium on the Corrosion Resistance of Decorative Thin Film Coatings - Eco-Friendly Chromium and Cadmium Dry Plating - Evaluation of Aluminum-Manganese as a Cadmium Replacement - Zinc-Tin: A Versatile Alternative to Cadmium for Brush Plating Applications - Hardening of Metallic Surfaces by Diffusion Processes (with and without Reaction) - Vitroceramic Oxidic Systems as Coatings on Pure Titanium (Biomedical Substrates) - Modification of Oxide Thermal Barrier Coatings Deposited on a Superalloy by Laser-Beam Radiation - Subject Index - Author Index "