Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 167 dokumen yang sesuai dengan query
cover
Fatmawaty
"ABSTRAK
Korosi adalah kerusakan material yang disebabkan oleh reaksi materi dengan lingkungannya. Dalam penelitian ini telah dilakukan analisis sifat korosi material magnet Nd-Fe-B dalam larutan HCI, NaCl dan NaOH (korosi basah.) dan pemanasan 100°C serta dalam udara terbuka -30°C (korosi kering).Preparasi sampel dilakukan dengan proses metalurgi serbuk dengan komposisi nomieial Nd15+,Fe?_xBa x = 0; x = 1; x = 3; x = 5. Laju korosi dihitung dengan metode kehilangan berat selama proses. Laju korosi yang tertinggi diamati jika material berada dalam larutan HCI kemudian diikuti oleh NaCl dan NaOH. Hasil identifikasi dengan sinar-x dan SEMIEDX menunjukkan bahwa setelah korosi terbentuk fasa BFe3, cc-Fe serta oksida dari Nd dan Fe. Disamping itu serangan korosi yang terjadi adalah korosi batas butir.

ABSTRACT
Corrosion is a material damage which is caused by the reaction with its environment. In this research some analysis's on the corrosion behavior of magnetic material Nd-Fe-B in HCI, NaCl and NaOH solutions (wet corrosion) and heating to 100°C and in open air -30°C (dry corrosion) have been conducted. The sample preparations were done with powder metallurgy process with the nominal composition of (Nd1 xFen.xB8), x = 0; x = 1; x =3; x =5. The corrosion study was done by evaluating the rate of corrosion with loss of the mass during the reaction method. The highest corrosion rate was in HCI solution and followed by NaCl and NaOH. The phase identification by X-ray result and SEMIEDX, showed that after the corrosion there was a phase change with the formed a-Fe, BFe3 and the oxide phase out of Nd and Fe. Besides that the other corrosion that occurred was the grain boundry corrosion.
"
1999
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Haipan Salam
"Epoxy-organo clay nanocomposite materials are constructed from a polymer as a matrix and an organoclay as filler. Epoxy-organo clay nanocomposites have been synthesized using various curing agents. The aim of this research was to study the influence of the curing agent and the organoclay contents to the structure and mechanical properties of nanocomposites materials. Epoxy-organo clay nanocomposites were synthesized using cycloaliphatic amine as a curing agent and a montmorillonite organoclay (MMT) as filler through an in situ polymerization method. XRD and TEM technique provide more detail information to understand the structure that relates to the mechanical properties of the materials. Tensile test, compressive test and hardness test were conducted based on ASTM and JIS standards. The fracture surfaces after tensile tests were analyzed using SEM. The nanocomposite properties were compared to glass-fiber composites which were synthesized using wet-laminating method.
It was found that the curing agent is influence to the nanocomposites structure which was shown by the change of d-spacing before and after the addition of the agent curing. XRD and TEM techniques showed that both intercalated and exfoliated structure have been formed. TEM image also exhibited that the number of intercalated structure was higher when the organoclay content was higher. It can be said that TEM techniques provides a better understanding of the nanocomposites structure and the number intercalated structure increase as the organoclay increases.
The organoclay contain also influences to mechanical properties of nanocomposite materials. The addition of 10.5 wt.% organoclay improved the tensile modulus by 185% but and decreased tensile strength by 186% and 49%, and these values are lower of 36% and 90% compared to glass fiber composites. These decreases in the strength may be attributed to the fact that agglomerate and void was formed. From compression test, the addition of 3.1 wt.% organoclay demonstrated a 102% increase in compression strength and a 93% increase in load maximum compare to epoxy resin. But, that compression strength value lower of 11% compared to glass fiber composites. For the maximum load, the addition of 3.1 wt.% organoclay improved 246% compared to glass fiber composites. Addition of 7.3 wt.% organoclay demonstrated an increase of modulus of the epoxy resin by 93% and 2% compare to glass fiber composites. Meanwhile, the addition of 10.5% organoclay cause decreasing in yield compression up to 31%, but this higher value equal to 406% from is glass fiber composites. While that, result of hardness test do not show the make-up of value meaning in comparison with epoxy matrix."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2007
T21011
UI - Tesis Membership  Universitas Indonesia Library
cover
Abdul Hadi Aviciena
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2007
T39841
UI - Tesis Membership  Universitas Indonesia Library
cover
R. Djoko Goenawan
"ABSTRAK
Telah diukur spektrum diameter aerosol [<0.4,0.4,0.7,1.1,2.1, 3.3,4.7,9 &
>9.0 μ] dengan Impaktor-Anderson dan distribusi (wt%) di Gunung Mas = 0.4(8)-
5.8μ(21) dengan konsentrasi 0.57 μg/m3 & di Teluk Naga = 0.4(13), 0.7(21),1.1
(16), 2.1(9), 3.3 (13), 4.7(21) s.d. >9.0 (1wt%), dengan mode-bimodial (0.7&4.7μ)
dan konsentrasi 0.085 μg/m3 pada periode Maret 2006. Sementara periode
Agustus-September di Gunung Mas = <0.4(0.3), 0.4(22), 0.7(27),1.1(13) s.d.
>9.0(4) dengan konsentrasi 0.207 μg/m3 & di Teluk Naga adalah <0.4(0.1),
0.4(22) s.d. >9.0 (2wt%) dengan konsentarsi 0.09 μg/m3. Konsentrasimaksimum
dengan Portacount [0.01-1μ] sebesar 2.9x104 partikel cm-3 di Teluk
Naga dan 1.6x104 partikel cm-3 di Gunung Mas. Konsentrasi-minimum=3.2x 103
partikel cm-3 di Teluk Naga dan 6x103 partikel cm-3 di Gunung Mas.
Ditemukan diameter kristis (optimum dan efektif) sebagai diameter Köhler
yaitu [0.5μ] dengan pengukuran Impaktor-Anderson pada rentang [0.4-0.7μ]
dengan konsentrasi maksimum (total) 48 wt% di Gunung Mas dan 43wt% di
Teluk Naga.
Tingkat-higroskopis aerosol (bruto) pada RH=83-87% dan T=29.7°C dan
kapasitas-higroskopis = 6.5x10-5gr menit-1. Tingkat-kondensasi pada rentang
T=30.9-26.2°C&RH=20%, T=24.6-23.3°C&RH=21% dan T=18.6-10.6°C&24-27%
serta kapasitas-kondensasi = 20.9x10-5gr menit-1.
Identifikasi fasa (utama) dengan XRF mengandung Belerang (sulphur)
dengan konsentrasi 61 wt% di Gunung Mas dan 87 wt% (36.9 ppm) di Teluk
Naga. Unsur minor (sebagian kecil) di Gunung Mas dan yang tidak terdapat di
Teluk Naga adalah Cd=13, Cl=4 (1.7 ppm), P=3, Al=3wt%, dan Cr, Mn, Ba, Bi
kurang 1wt%.
Dengan AAS, diidentifikasi mengandung Na (fasa minor) sebesar 2 ppm
di Gunung Mas dan 5 ppm di Teluk Naga."
2007
T21295
UI - Tesis Membership  Universitas Indonesia Library
cover
Iwan Setiawan
"Kebutuhan asam dari suatu pelarutan bijih tembaga teroksidasi merupakan salah satu faktor penting secara ekonomi dan kuantitasnya harus dapat ditentukan secara optimal untuk mendapatkan proses pelarutan yang efisien. Suatu studi kinetik oleh asam sulfat dari bijih tembaga teroksidasi khususnya Malachite telah diteliti. Pengaruh dari waktu leaching, kecepatan pengadukan, konsentrasi asam dan perbandingan solid liquid, temperature dan ukuran dari bijih telah diteliti. Menggunakan kondisi terbaik diperoleh recovery 90% pada 250C dan 98% pada 800C setelah 150 menit waktu leaching dan pada konsentarsi asam 1 mol/L dengan perbandingan liquid/solid 6:1. Pelarutan dari Malachite selama leaching dapat digambarkan sebagai fungsi logaritma, y=a ln(x) + B. Berdasarkan data dari pelarutan awal menggunakan asam sulfat diketahui bahwa kinetika pelarutan batuan tembaga jenis malachite dikontrol oleh suatu reaksi diffusi.
......The relationship of percent copper extraction to acid consumption must be refined to optimized the economic value and the consumption quantity must be known to get the efficiency of extraction. A study kinetics of the sulfuric acid leaching of oxidized copper ore malachite from North Sumatera was carried out. The effect of leaching time, stirring, sulfuric acid concentration, ratio solid liquid, temperature, particle size were analyzed. The optimum condition, copper recovery about 90% at 250C and 98% at 800C after 30 minute leaching time in 1.0 M sulfuric acid concentration with liquid/solid ratio 6:1 at 150 rpm. Malachite dissolution during leaching can be described by logaritmic function. Basic on data obtained for the leaching kinetics indicated that the initial dissolution of malachite is a diffusion controlled reaction."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2007
T21341
UI - Tesis Membership  Universitas Indonesia Library
cover
Markus Kunardianto
"Benda uji paduan Alumunium seri 3104-H19 berbentuk lembaran sebagai bahan baku kemasan minuman kaleng, dilakukan uji korosi dengan metoda perendaman dalam larutan asam yaitu larutan korosif sesuai dengan ASTM G34, yaitu 4M NaCl + 0,5 M KNO3 + 0,1M HNO3. Bahan paduan Alumunium tersebut adalah 3104-H19 dengan kandungan unsur Titanium, Ti yang berbeda yaitu 0,013 % berat 0.010 % berat dan 0%.
Dalam pengujian ini diamati bentuk korosi yang terjadi dan besarnya laju korosi pada waktu perendaman dengan variasi waktu 1, 2, 3, 4 dan 5 hari. Serta divariasikan konsentrasi larutan korosif bahan perendaman, yaitu 4M NaCl; 2M NaCl, 5M NaCl dan 6M NaCl.
Dari pengujian ini dapat diketahui bahwa makin banyak kandungan Ti pada paduan alumunium akan meningkatkan ketahanan korosinya dimana kandungan Ti 0,013% lebih baik dibandingkan 0,01% dan 0%.
......Specimen Alumunium alloy foil 3104 H19 as a raw material for beverages can, would be got corrosion test by immersing in acid solution according to ASTM G34, it was 4M NaCl + 0,5 M KNO3 + 0,1M HNO3. The material alumunium alloy 3104 H19 was having Titanium, Ti element with 0.013% of weight; 0.010 % of weight and 0%. This experiment would be observed for corrosion shape and rate of corrosion with variation of duration immersing, 1, 2, 3, 4 and 5 days. Also for variation of concentration of corrosive solution, 4M NaCl; 2M NaCl, 5M NaCl dan 6M NaCl.
By experiment, it was known that the more quantity of titanium element on the alloy, will enhance the corrosion resistance, which Ti 0.013% is better than 0.010% and 0%."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2007
T21360
UI - Tesis Membership  Universitas Indonesia Library
cover
Dini Harsanti
"Boron karbida merupakan material yang sulit terbentuk yang memiliki struktur dan aplikasi elektronik yang menarik. Beberapa kelebihan yang dimiliki oleh boron karbida antara lain stabil pada temperatur tinggi, memiliki tingkat kekerasan yang tinggi, berkemampuan tinggi dalam menyerap neutron pada pusat reaktor nuklir, dan memiliki sifat-sifat termoelektrik yang sangat baik. Kombinasi dari sifat-sifat tersebut memungkinkan boron karbida digunakan dalam berbagai aplikasi, termasuk material yang tahan abrasi, persenjataan militer, moderator neutron pada reaktor nuklir, dan berpotensial diaplikasikan pada pembangkit daya penerbangan angkasa luar.
Penelitian ini berhasil mensintesis boron karbida dengan fasa B4C yang memiliki sistem kristal rhombohedral, space grup m 3 R , dan parameter kisi a = b = 5,600, c = 12,08, α = β = γ = 90o dengan menggunakan bahan-bahan awal berupa asam borat (H3BO3), karbon aktif, dan asam sitrat (C6H8O7) yang ditambahkan dengan magnesium sebagai koreduktor.
......Boron carbide is highly refractory material that is of great interest for both its structural and electronic properties. Of particular importance are its high-temperature stability, high hardness, high cross-section for neutron capture, and excellent high-temperature thermoelectric properties. This combination of properties gives rise to numerous applications, including uses as an abrasive wear-resistant material, ceramic armor, a neutron moderator in nuclear reactors, and potentially, for power generating deep space flight applications.
This experimental succesfull to synthesis B4C boron carbide that has rhombohedral crystal system, space grup m 3 R, and lattice constant a = b = 5,600, c = 12,08, α = β = γ = 90o by using raw materials i.e. boric acid (H3BO3), activated carbon, dan citric acid (C6H8O7) and magnesium as co-reductant."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2007
T21364
UI - Tesis Membership  Universitas Indonesia Library
cover
Qadri Fitrothul Khasanah
"Telah dilakukan sintesa dan karakterisasi terhadap efek substitusi parsial ion La terhadap sistem senyawa LaxSr1-xO.6(Fe1,5Mn0,25Ti0,25O3) sebagai material penyanggah radiasi gelombang mikro dengan x adalah 0,3:0,5:0,7. Proses pembentukan dengan Hight Energy Milling/mekanikal alloying dari senyawa dasar La2O3, SrCO3, Fe2O3, MnO3, TiO2. Tahapan kristalisasi dilakukan dengan waktu pemanasan 4 jam suhu 1050 oC. Untuk x=0,3 dihasilkan 1 fasa La0,3Sr0,7O.6(Fe2O3), pola difraksi mengikuti pola SrO.6(Fe2O3). Loop hysterisis menunjukan magnet permanent dengan hasil remanen 1258 emu/gr, koersivitas 0.1489 Oe. Untuk x= 0,5 dan 0,7 memiliki nilai remanen berkurang karena adanya fasa kedua dan ketiga sebesar 1251,46 emu/gr dan 1241,58 emu/gr, dengan nilai coersivitas 0,045 dan 0.146 Oe. Pada saat y = 1,5 substitusi Mn dan Ti untuk sistem LaxSr1-xO.6(Fe1- yMny/2Tiy/2O3) pada hasil XRD menunjukkan 3 fasa dan loop hysterisis menunjukkan sifat feromagnetik, dengan nilai remanen tidak jauh berbeda dan koersifitas yang menurun dari sistem untuk x 0,3-0,7. Karakterisasi magnetik sistem LaxSr1-xO.6(Fe1.5Mn0.25Ti0.25O3) menghasilkan nilai intensitas reflection loss paling optimal sebesar -6.73 dB pada frekuensi optimal 14,9 GHz. Dengan adanya substitusi Mn dan Ti sifat magnetik sistem berkurang sehingga menurunkan nilai absorbsi.

Synthesis and characterization has been done on the effects of partial substitution of ion La to the system LaxSr1-xO.6(Fe1,5Mn0,25Ti0,25O3) as a material absorber of microwave radiation with x 0,3:0,5:0,7. Design process with Hight Energy Milling / mechanical alloying basic compounds La2O3, SrCO3, Fe2O3, MnO3, TiO2. Stages of crystallization with the heating temperature of 1050°C 4 hours. For x = 0.3 produced a phase La0,3Sr0,7O.6(Fe2O3), following of diffraction patterns SrO.6(Fe2O3). Loop Hysteresis shows a permanent magnet with the remanent 1258 emu / g, and coercivity 0.1489 Oe. For x = 0.5 and 0.7 have a remanent value reduced because of the second and third phases is 1251.46 emu / g and 1241.58 emu / g, with a coercivity value 0.045Oe and 0146 Oe. y = 1.5 substitution of Mn and Ti system of LaxSr1-xO.6(Fe1-yMny/2Tiy/2O3) for XRD results indicate 3 phase a ferromagnetic characteristic. Loop hysteresis show is not much different the value of remanent, and the coercivity decrease of system LaxSr1-xO.6(Fe1, 5Mn0, 25Ti0, 25O3). for x 0.3 to 0.7. Magnetic characterization of the reflection loss systems LaxSr1-xO.6(Fe1.5Mn0.25Ti0.25O3) optimal value of -6.73 dB at a optimal frequency of 14.9 GHz. The substitution of Mn and Ti of the system is reduced magnetic characteristic in lower absorption values."
Depok: Universitas Indonesia, 2012
T31167
UI - Tesis Open  Universitas Indonesia Library
cover
Detin Audriyanti
"KOWEL adalah salah satu komponen otomotif yang digunakan P.T German Motor Manufacturing Gunung Putri Cileungsi Bogor pada kendaraan tipe light truck Mercedes Benz 800. Fungsinya adalah sebagai dudukan kaca depan, penyangga pintu dan tempat dudukan lampu depan. Bahan dasar KOWEL adalah lembaran baja karbon sangat rendah tipe SPCE dengan unsur paduan dan memiliki sifat kekuatan dan kekerasan serta keuletan yang memenuhi syarat untuk proses pembentukan. Pembentukan KOWEL dengan proses press forming langsung dari bahan dasar sering mengalami kegagalan yang pada akhirnya sia-sia karena kualitasnya yang rendah tidak sesuai dengan keinginan. Untuk itu dilakukan penelitian pada benda uji dari lembaran baja sebelum dan sesudah proses press forming dengan pilihan kontrol temperatur dan waktu penahanan dengan tujuan untuk mengetahui dan mendapatkan solusi karakteristik sifat mekanik serta tekstur guna meningkatkan optimasi bahan. Pengujian yang dilakukan mencakup pengamatan XRD, uji komposisi kimia, uji tarik, koefisien anisotropi plastis, uji kekerasan, metalografi dengan mikroskop optik dan pengamatan permukaan patahan dengan SEM serta pengamatan pole figure-tekstur. Hasil penelitian menunjukkan bahwa proses press forming di samping terjadinya penipisan pada benda kerja diikuti pula dengan meningkatnya kekerasan, kekuatan dan berkurangnya keuletan dan berkurangnya ketajaman tekstur. Proses perlakuan panas pada temperatur 400 °C dengan waktu penahanan masing-masing 15 menit dan 60 menit tidak menunjukkan perubahan yang berarti pada benda uji sebelum maupun setelah proses press forming.
......KOWEL is an automotive component used by P.T. German Motor Manufacturing Gunung Putri Cileungsi Bogor that is usually assembled for front panel of light truck-type of Mercedes Benz 800 construction. Base material for this KOWEL is ultra low carbon steel sheet SPCE-type which has alloying elements with toughness, hardness and ductility suit for forming process. Unfortunately, press forming of the material to form KOWEL often results in failure. To get the solution and to find out the characteristic of mechanical properties and texture before and after press forming process, a research is then carried out. Some examinations are applied including XRD measurement, chemical composition, tensile strength, anisotropy coefficient, Vickers's hardness, optical metallography, SEM and pole figure. The results show that press forming will thin the material followed by increase of hardness and toughness and decrease of ductility and texture sharpness. Heat treatment at 400 °C for 15 and 60 minutes does not give a significant change in material before and after the press forming process."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2001
T810
UI - Tesis Membership  Universitas Indonesia Library
cover
Muslimin
"Telah dibuat lapisan tipis Indium Tin Oxide (In2O3 : SnO2 ; ITO) pada substrat kaca dengan cara dc magnetron sputtering. Perbandingan gas Argon dan oksigen dalam sputter divariasikan dari 3.1%, 5.1%, 8.0% dan 8.9%. Sampel yang dibuat digunakan untuk mempelajari pengaruh tekanan parsial oksigen terhadap sifat listrik lapisan tipis Indium Tin Oxide, pengukuran resistivitas listrik lapisan tipis dilakukan di luar vakum dengan metode four point probe untuk rentang temperatur 11°K sampai 300°K, sedangkan penentuan jumlah pembawa muatan dilakukan dengan metode efek Hall pada lapisan tipis. Energi aktivasi sebagai fungsi temperatur pada lapisan tipis ITO yang diperoleh pada penelitian ini berkisar antara 9.6 x 10.3 eV sampai 1.5 x 10-5 eV. Jika tekanan partial oksigen makin besar maka resistivitas listrik lapiasa tipis ITO makin besar sedangkan jumlah pembawa muatannya makin kecil."
Depok: Universitas Indonesia, 1998
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>