Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 32 dokumen yang sesuai dengan query
cover
Felix Ferdinand
Abstrak :
Sistem CRISPR-Cas9 merupakan mekanisme perlindungan bakteri terhadap materi genetik asing yang diaplikasikan secara luas dalam rekayasa genetika. Kombinasi enzim Cas9 dengan gRNA pada CRISPR-Cas9 memungkinkan terjadinya pengeditan genom terhadap target yang spesifik. Meskipun demikian, Cas9 yang dikembangkan saat ini berasal dari bakteri mesofilik sehingga rentan terdegradasi dan tidak cocok untuk aplikasi pada temperatur tinggi. Di sisi lain, bakteri termofilik Geobacillus kaustophilus telah diisolasi dari mata air panas di Cisolong, Banten, dan diidentifikasi mengandung enzim Cas9. Untuk memperoleh enzim Cas9 yang tidak terdenaturasi pada temperatur tinggi (termostabil), dilakukan uji coba produksi Cas9 rekombinan dari Geobacillus kaustophilus. Gen Cas9 yang telah dikloning pada plasmid pET43.1a ditransformasikan ke dalam Escherichia coli BL21 dan dikultur dengan konsentrasi penambahan IPTG yang bervariasi—0,05 mM, 0,20 mM, dan 0,50 mM. Hasil kultur bakteri dipanaskan pada temperatur yang bervariasi (50 °C, 60 °C, dan 70 °C) untuk mendenaturasi enzim non-termofilik. Setelah itu, sampel dipurifikasi dengan mmobilized Metal Affinity Chromatography untuk memperoleh enzim Cas9. Hasil uji Lowry menunjukkan sampel heated supernatant dengan konsentrasi IPTG 0,05 mM dan temperatur pemanasan 50 °C memiliki konsentrasi protein tertinggi dan hasil purifikasinya memiliki konsentrasi Cas9 sebesar 42,6 μg/mL. Identifikasi protein dengan uji SDS-PAGE menunjukkan ukuran protein hasil purifikasi sebesar 52,61 kDa. ......The CRISPR-Cas9 system is a bacterial defense mechanism against foreign genetic material that is broadly applied in genetic engineering. The combination of Cas9 enzyme and gRNA in CRISPR-Cas9 allows genome editing of specific targets. However, the currently developed Cas9 originated from mesophilic bacteria, making it susceptible to degradation and unsuitable for applications requiring elevated temperatures. On the other hand, the thermophilic bacterium, Geobacillus kaustophilus, was isolated from a hot spring in Cisolong, Banten, and identified as containing the Cas9 enzyme. To obtain undenatured Cas9 enzymes at high temperatures (thermostable), a production test of recombinant Cas9 from Geobacillus kaustophilus was carried out. The Cas9 gene cloned on the pET43.1a plasmid was transformed into Escherichia coli BL21 and cultured under various IPTG addition concentrations—0.05 mM, 0.20 mM, and 0.50 mM. The bacterial cultures were heated at various temperatures (50 °C, 60 °C, and 70 °C) to denature unwanted non-thermophilic enzymes. Thereafter, the samples were purified using Immobilized Metal Affinity Chromatography to obtain Cas9 enzyme. Lowry protein assay results showed that the heated supernatant sample with 0.05 mM IPTG addition and 50 °C heating temperature has the highest protein concentration, and the purified sample yielded a Cas9 concentration of 42.6 μg/mL. Protein identification with SDS-PAGE revealed a purified protein size of 52.61 kDa
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Givon Fatakhul Khisan
Abstrak :
Solanesol memiliki aktivitas antioksidan yang tinggi dan absorpsi radikal bebas yang kuat dan sebagai bahan baku intermediat koenzim Q10. Solanesol umumnya ditemukan di tanaman solanaceous. Daun tembakau termasuk tanaman yang mengandung sumber solanesol terbanyak. Sintesis berbantuan ultrasonik (UAE) meningkatkan rendemen ekstrak melalui reduksi waktu proses, temperatur rendah, dan penggunaan pelarut yang aman. Penelitian ini mengevaluasi kelayakan investasi dari pabrik produksi solanesol dari daun tembakau sebagai bahan baku intermediat koenzim Q10. Pabrik akan dibangun di daerah Temanggung dengan masa usia proyek 15 tahun dan ditargetkan mampu memenuhi 1% market share di Asia Pasifik. Penelitian ini membandingkan tiga alur skenario proses ekstraksi solanesol, yaitu UAE Skenario 1, UAE Skenario 2, dan Soxhlet. Perangkat lunak SuperPro Designer digunakan untuk mensimulasikan proses produksi sehingga diperoleh data neraca massa, energi, dan parameter keekonomian. Simulasi menunjukkan produksi solanesol dengan metode ekstraksi UAE Skenario 1 pada daun tembakau sebagai skenario terbaik dengan nilai konversi 2,3% dan parameter profitabilitas berupa NPV, IRR, PBP, dan ROI sebesar USD 25.764.000, 34,45%, 2,20 tahun, dan 45,49% secara berurutan pada harga jual solanesol sebesar USD 2100/kg. Alternatif lain dengan metode UAE Skenario 2 dan Soxhlet memiliki nilai konversi tertinggi dan terendah, yaitu masing – masing 2,5%, dan 2,17%, dengan nilai parameter profitabilitas positif ......Solanesol has high antioxidant activity and strong free radical absorption, and serves as an intermediate raw material for coenzyme Q10. Solanesol commonly found in solanaceous plants. Tobacco leaves are the highest source of solanesol. Ultrasonic-assisted extraction (UAE) increases the extract yield through reduce process time, low temperature, and using safe solvents. This study evaluates economic feasibility in solanesol production plant from tobacco leaves. The plant will be built in the Temanggung city with a project lifespan of 15 years and aims to achieve a 1% market share in the Asia Pasific region. This research compares three process extraction scenarios for solanesol: UAE Scenario 1, UAE Scenario 2, and Soxhlet. The SuperPro Designer software is used to simulate the production process, obtaining data on mass and energy balance, and economic parameters. The simulation shows that solanesol production using UAE Scenario 1 is the best scenario, with a conversion rate of 2,3% and profitability parameters such as NPV, IRR, PBP, and ROI of USD 25.764.000, 34,45%, 2,20 years, and 45,49% respectively, at solanesol selling price of USD 2.100/kg. Meanwhile, UAE Scenario 2 and Soxhlet methods has the highest and lowest conversion rates at 2,5% and 2,17% respectively, with positive profitability parameters.
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Jelita Helianisa
Abstrak :
Tempurung kelapa merupakan biomassa hasil samping pengolahan buah kelapa yang pemanfaatannya belum optimal karena dianggap sebagai limbah tak bernilai. Dalam proses pengembangannya, limbah tempurung kelapa memiliki peluang yang besar untuk dimanfaatkan sebagai produk dengan nilai ekonomi tinggi seperti BTX (Benzena, Toluena, Xilena) karena memiliki building block berupa senyawa aromatik. Proses pirolisis termal dan perengkahan katalitik biomassa tempurung kelapa telah dilakukan dalam reaktor unggun diam untuk menghasilkan senyawa BTX masing – masing pada suhu 550oC dan 500oC. Katalis CaO/HZSM-5 yang disintesis melalui teknik pencampuran fisik dan impregnasi basah dengan perbandingan 2:1 terhadap umpan bio-oil digunakan pada proses upgrading perengkahan katalitik. Katalis CaO/HZSM-5 dipilih karena penggunaan kedua katalis tersebut secara simultan memberikan efek sinergis dalam menghasilkan senyawa monoaromatik BTX. Penambahan CaO terbukti mampu meningkatkan ukuran pori rata – rata katalis setelah termodifikasi sehingga dapat menurunkan kemungkinan deaktivasi katalis dengan mencegah pembentukan kokas. Karakterisasi BET terhadap katalis menunjukkan bahwa diameter pori katalis CaO/HZSM-5 pencampuran fisik dan impregnasi basah secara berturut – turut sebesar 2,14 nm dan 5,24 nm. Selanjutnya, bio-oil melalui karakterisasi FTIR dimana produk upgrading bio-oil tempurung kelapa didominasi oleh senyawa aromatic, phenol, dan alcohol. Berdasarkan karakterisasi GC-MS, katalis CaO/HZSM-5 hasil pencampuran fisik memberikan kinerja optimal dimana yield BTX tertinggi yang diperoleh sebesar 45,85%. Penelitian ini diharapkan dapat memberikan solusi alternatif dalam mengurangi ketergantungan pada bahan bakar fosil......Coconut shell is a by-product of processing coconuts whose utilization is not optimal because it is considered as worthless waste. In the development process, coconut shell waste has an excellent opportunity for being utilized as a product with high economic value as BTX (Benzene, Toluene, Xylene) due to its high content of lignin which is the building block in the form of aromatic compounds. Thermal pyrolysis and catalytic cracking of coconut shell biomass have been carried out in a fixed bed reactor to produce BTX compounds at 550oC and 500oC, respectively. CaO/HZSM-5 catalyst was synthesized using physical mixing and wet impregnation technique with a ratio of 2:1 to bio-oil feed in the upgrading process of catalytic cracking. CaO/HZSM-5 catalyst was chosen because the use of the two catalysts simultaneously provides a synergistic effect in producing BTX compounds. The addition of CaO has proven to increase the average pore size of the catalyst after modification and reduce the possibility of catalyst deactivation by preventing coke formation. The BET characterization of the catalyst showed that the pore diameters of the CaO/HZSM-5 catalyst of physical mixing and wet impregnation were 2,14 nm and 5,24 nm, respectively. Furthermore, FTIR characterization showed the upgrading product of coconut shell bio-oil dominated by aromatic compounds, phenols, and alcohols. Based on the GC-MS characterization, the CaO/HZSM-5 catalyst of physical mixing gave an optimal performance where the highest BTX yield was obtained at 45.85%. This research was expected to provide alternative solutions to reduce dependency on fossil fuels.
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Gian Varian Setyadi
Abstrak :
Kebutuhan akan media pengemas makanan yang semakin meningkat seiring dengan era disrupsi teknologi, selaras dengan meningkatnya tindakan pencemaran lingkungan yang terbilang tidak terkendali. Salah satu solusinya adalah menggunakan bioplastik. Penelitian ini menggunakan pati kulit pisang tanduk dan cavendish sebagai bahan baku utama pembuatan bioplastik. Pati terlebih dahulu diekstrak dari kulit pisang tanduk dan cavendish, lalu dicampur dengan zat aditif lainnya seperti gliserol dan sorbitol yang bertindak sebagai pemlastis. Penelitian ini dilakukan bermula dari permasalahan terkait pemberian pemlastis gliserol dan sorbitol serta pemanfaatan pati dengan kadar tertentu agar didapatkan formulasi terbaik dalam meningkatkan sifat fisik dan mekanik bioplastik. Pencampuran antara kedua pemlastis tersebut dilakukan dengan rasio konsentrasi 2:1 (v/v) serta perlakuan yang sama dalam mengekstraksi pati dari kulit pisang. Besar konsentrasi pemlastis yang digunakan sebesar 35% (v/v) dan 70% (v/v) sebanyak 2 ml, serta komposisi massa pati sebesar 3 gram. Hasil uji kadar pati dengan metode Luff Schoorl menunjukkan kadar pati kulit pisang tanduk lebih besar 3% dibandingkan pati kulit pisang cavendish pada usia yang diperkirakan serupa berdasarkan warna kulitnya. Dari uji FTIR ditunjukkan bahwa tiap sampel memiliki gugus fungsi yang terbilang cukup serupa satu sama lain. Sifat fisik diukur dengan beberapa parameter yang saling berkaitan satu sama lain, antara lain ketebalan, daya serap terhadap air, serta biodegradabilitas, dimana sifat fisik terbaik dimiliki oleh sampel S70C. Meskipun hasil ketebalan tidak menunjukkan perbedaan yang signifikan, namun sifat daya serap air menunjukkan sampel S70C serta S70T adalah yang paling rendah, serta biodegradabilitas sampel S70C merupakan yang paling baik, dinilai dari konsistensi kehilangan massanya saat dilalui proses penguburan dalam tanah kompos. Sifat mekanik diukur dengan parameter kekuatan tarik dan elongasi saat putus, dimana nilai kuat tarik terendah pada sampel S35T (0,09 N/mm2) serta yang tertinggi pada sampel S35C (0,23 N/mm2), diikuti oleh S70T (0,21 N/mm2) dan S70C (0,19 N/mm2). Persen elongasi tertinggi pada sampel S70C sebesar 12,83% dan terendah pada S35T sebesar 6,99%. Hasil uji SEM menunjukkan adanya tekstur yang halus hingga sama sekali kasar atau kurangnya kemerataan bahan pembentuk sampel...... The need for food packaging media is increasing along with the era of technological disruption, in line with the increasing acts of environmental pollution that are fairly uncontrolled. One solution is to use bioplastics. This study used banana peel starch and cavendish as the main raw materials for making bioplastics. Starch is first extracted from tanduk and cavendish banana peel, then mixed with other additives such as glycerol and sorbitol which act as a plasticizer. This research was conducted starting from problems related to the provision of glycerol and sorbitol plasticizers as well as the use of starch with certain levels in order to obtain the best formulation in improving the physical and mechanical properties of bioplastics. The mixing between the two plasticizers was carried out with a concentration ratio of 2:1 (v/v) as well as the same treatment in extracting starch from banana peels. The concentration of plasticizer used was 35% (v/v) and 70% (v/v) of 2 ml, as well as a starch mass composition of 3 grams. The results of the starch content test with the Luff Schoorl method showed that the starch content of the tanduk banana peel was 3% greater than that of cavendish banana peel starch at a similar age based on the skin color. From the FTIR test, it is shown that each sample has functional groups that are quite similar to each other. Physical properties are measured by several parameters that are interrelated with each other, including thickness, absorption of water, and biodegradability, where the best physical properties are possessed by the S70C sample. Although the thickness results did not show a significant difference, the nature of water absorption showed that S70C and S70T samples were the lowest, and the biodegradability of S70C samples was the best, judged by the consistency of losing mass when going through the burial process in compost soils. Mechanical properties are measured by the parameters of tensile strength and elongation at break, where the lowest tensile strength value in the S35T sample (0,09 N/mm2) and the highest in the S35C sample (0,23 N/mm2), followed by S70T (0,21 N/mm2) and S70C (0,19 N/mm2). Percent of elongation was highest in the S70C sample at 12,83% and lowest in the S35T at 6,99%. SEM test results show the presence of a smooth to completely rough texture or lack of evenness of the sample forming material.
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Peter Surjo
Abstrak :
Keberadaan limbah antibiotik pada perairan berbahaya bagi lingkungan dan makhluk hidup, salah satu antibiotik yang umum ditemui dan dalam kadar yang cukup besar adalah siprofloksasin (CIP). Selain itu, belakangan ini hidrogen (H2) sebagai bahan bakar bersih gencar diteliti untuk penerapannya dalam kehidupan sehari-hari, namun produksi H2 saat ini masih sangat bergantung dengan bahan bakar fosil. Untuk memenuhi kedua kebutuhan tersebut secara simultan digunakan teknologi fotokatalisis dan elektrokoagulasi yang dikombinasi. Fotokatalis yang digunakan pada penelitian ini adalah titanium nanotubes array (TiNTA) menggunakan dopan CuO dengan metode SILAR (Successive Ionic Layer Adsorption and Reaction). Pembentukan nanokomposit CuO-TiNTA dikonfirmasi dengan karakterisasi FESEM/EDX (Field Emission Scanning Electron Microscopy/Energy-Dispersive X-Ray), XRD (X-Ray Diffraction), dan UV-Vis DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy). Pengujian fotokatalisis dilakukan dengan menggunakan lampu merkuri 250 W dua buah sebagai sumber foton fotokatalis, sementara pengujian elektrokoagulasi menggunakan anoda aluminium (Al) dan katoda stainless steel (SS-316) dengan tegangan 20 V, serta pada kombinasi menggunakan gabungan dari keduanya. Degradasi dan produksi H2 dari fotokatalis diperoleh sangat kecil dengan fotokatalis optimal TiNTA 5-CuO mencapai degradasi CIP sebesar 8,7% dan memproduksi 10,12 μmol/m2 H2. Eliminasi CIP dan produksi H2 secara elektrokoagulasi diperoleh sebesar 66,33% dan 1.137 mmol/m2, sementara pada kombinasi fotokatalisis-elektrokoagulasi terjadi peningkatan sebesar 36% dan 114% dari elektrokoagulasi, menghasilkan eliminasi CIP 85% dan 2.431 mmol/m2 H2 dan lebih besar daripada gabungan proses tunggal. ......Presence of antibiotic in water is harmful towards environment, one of the commonly used antibiotics and usually present in large concentration is ciprofloxacin (CIP). Meanwhile, recently hydrogen (H2) has been extensively researched for application in daily lives, but commercial H2 production still depends on usage of fossil fuel. To fullfil both requirements simultaneously, photocatalysisis, electrocoagulation, and combination of both is used. Photocatalyst used in this study is titanium nanotubes array (TiNTA) doped with CuO using SILAR (Successive Ionic Layer Adsorption and Reaction) method. Presence of CuO-TiNTA nanocomposite is analysed by FESEM/EDX (Field Emission Scanning Electron Microscopy/Energy-Dispersive X-Ray), XRD (X-Ray Diffraction), and UV-Vis DRS (Ultraviolet-Visible Diffuse Reflectance Spectroscopy) characterisations. Photocatalysis experiment uses two 250 W mercury lamps as source of photon, meanwhile electrocoagulation experiment uses aluminium (Al) anode and stainless steel (SS-316) cathode with 20 V voltage, and combination uses both methods. Photocatalytic CIP degradation and H2 evolution give a small result with TiNTA 5-CuO as optimal photocatalyst with 8.7% CIP degradation and 10.12 μmol/m2 H2. CIP elimination and H2 production from electrocoagulation resulted in 66.33% CIP elimination and 1,137 mmol/m2 H2, while in photocatalysis-electrocoagultion significant increase of 36% elimination and 114% H2 production is observed compared to electrocoagulation, resulting 85% CIP elimination and 2,431 mmol/m2 H2 produced, higher result compared to sum of single processes.
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Syamil Hakim
Abstrak :
Pada proses sintesis nanopartikel ZnO, diperlukan surfaktan yang digunakan untuk mengontrol ukuran dan dispersi nanopartikel. Daun sengon memiliki kandungan saponin yang berperan sebagai biosurfaktan dan dapat berperan sebagai alternatif dari surfaktan yang umum digunakan yang bersifat toksik dan non-biodegradable. Pada penelitian ini, daun sengon (Albizia Chinensis) diekstrak menggunakan metode maserasi untuk menghasilkan maserat kental. Saponin pada ekstrak daun sengon dapat digunakan sebagai agen capping pada proses biosintesis nanopartikel ZnO. Nanopartikel ZnO kemudian digunakan dalam formulasi tabir surya untuk meningkatkan kemampuan antibakteri. Proses pembentukkan ZnO pada sintesis berlangsung terjadi melalui mekanisme reaksi antara larutan prekursor Zn(CH3COO)2.2H2O dengan ekstrak saponin dari daun sengon dan NaOH. Biosintesis nanopartikel ZnO dilakukan menggunakan ekstrak daun sengon dan pengujian kristal ZnO dilakukan. Formulasi tabir surya dilakukan dan pengujian antibakteri dilakukan dengan mengukur zona hambat bakteri E. Coli. ZnO yang disintesis memiliki struktur kristal heksagonal wurtzite dengan ukuran partikel terkecil 405 nm dan kemurnian 75%. Tabir surya yang dihasilkan menggunakan ZnO hasil sintesis memiliki performa Sun Protection Factor (SPF) dan antibakteri yang serupa dengan ZnO komersial dengan nilai SPF tertinggi 32 dan diameter daerah hambat 10,2 cm. ......In the process of synthesizing ZnO nanoparticles, surfactants are needed to control the size and dispersion of nanoparticles. Sengon leaves contain saponins that act as biosurfactants and can act as an alternative to commonly used surfactants that are toxic and non-biodegradable. In this study, the leaves of sengon (Albizia Chinensis) were extracted using maceration. Saponins in the extract can be used as capping agents in the ZnO nanoparticle biosynthesis process. The ZnO nanoparticles were then used in sunscreen formulations to enhance the antibacterial ability. The process of forming ZnO in the synthesis takes place through a reaction mechanism between the precursor solution of Zn(CH3COO)2.2H2O with saponin from sengon leaves and NaOH. The biosynthesis of ZnO nanoparticles was carried out using sengon leaf extract and ZnO crystal analysis was carried out. Sunscreen formulations were carried out and antibacterial testing was carried out by measuring the inhibition zone of E. Coli. The synthesized ZnO has a hexagonal wurtzite crystal structure with the particle size of 405 nm and 75% purity. The sunscreen produced using synthesized ZnO has Sun Protection Factor (SPF) and antibacterial performance similar to commercial ZnO with the highest SPF value of 32 and the diameter of the inhibition zone is 10.2 cm.
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Mirza Muhammad Adjie
Abstrak :
Reaksi dekarboksilasi minyak jarak kepyar dengan penambahan Ca(OH)2 berlebih untuk pembuatan hidrokarbon setara fraksi diesel telah dilakukan. Reaksi dilakukan di dalam reaktor batch yang beroperasi pada tekanan atmosferik dan temperatur antara 425 – 500 oC. Variasi yang dilakukan meliputi variasi rasio umpan, temperatur saponifikasi dan temperatur dekarboksilasi. Reaksi dengan umpan rasio umpan 1:6, temperatur saponifikasi 200 oC dan temperatur dekarboksilasi 475 oC memberikan konversi terbesar yaitu 67,46%. Analisa sifat fisik yang meliputi densitas dan viskositas menunjukkan bahwa produk yang dihasilkan telah memenuhi standar yang ditetapkan oleh SNI 8220:2017. Produk cair dianalisa analisa GC–MS menunjukkan komposisi hidrokarbon setara fraksi diesel sebesar 36,87%. Analisa menggunakan FTIR, menunjukkan masih banyaknya gugus asam karboksilat dalam produk. Upgrading dengan penambahan asam borat mampu menghilangkan gugus karboksilat, tetapi komposisi senyawa yang didapat tidak sesuai dengan fraksi diesel. ......The decarboxylation reaction of Castor oil with the addition of excess Ca(OH)2 for the manufacture of hydrocarbons equivalent to the diesel fraction has been carried out. The reaction was carried out in a batch reactor operating at atmospheric pressure and temperature between 425 – 500 oC. Variations carried out include variations in feed ratio, saponification temperature and decarboxylation temperature. The reaction with feed ratio of 1:6, saponification temperature of 200 oC and decarboxylation temperature of 475 oC gave the largest conversion, namely 67.46%. Analysis of physical properties which include density and viscosity shows that the resulting product has met the standards set by SNI 8220:2017. The liquid product was analyzed by GC–MS analysis showing the hydrocarbon composition equivalent to the diesel fraction of 36.87%. Analysis using FTIR, shows that there are still many carboxylic acid groups in the product. Upgrading with the addition of boric acid was able to remove the carboxylic groups, but the composition of the compounds obtained did not match the diesel fraction.
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Farashinta Dellarosa Nanda Pratama
Abstrak :
Modifikasi TiO2 dalam produksi hidrogen secara fotokatalitik telah luas dipelajari untuk mengatasi keterbatasannya dalam pemanfaatan sinar tampak dan rekombinasi electron- hole, salah satunya melalui kombinasi graphene dan dopan Fe. Penelitian ini mengkaji pengaruh variasi konsentrasi Fe pada fotokatalis Fe-graphene/TiO2 dan variasi sacrificial agent polialkohol terhadap produksi hidrogen. Karakterisasi fotokatalis dilakukan pada TiO2 P25 dan graphene/TiO2, Fe-graphene/TiO2 yang disintesis dengan metode impregnasi. Analisis XRD, SEM-EDX, UV-Vis DRS, dan FTIR menunjukkan keberadaan graphene dan dopan Fe pada TiO2 dengan ukuran kristal untuk TiO2 P25, graphene/TiO2, dan Fe-graphene/TiO2 masing-masing 17,68 nm, 17,66 nm, dan 15,16 nm. Uji produksi hidrogen dilakukan selama 5 jam dalam reaktor dengan pencahayaan internal, yang dilengkapi lampu UV 20W, buret dan cooling water. Analisis GC pada sampel gas buret mengkonfirmasi terjadinya pembentukan hidrogen. Akumulasi hidrogen yang diperoleh untuk konsentrasi Fe 0,2%, 0,5%, dan 0,7% berturut-turut sebesar 394 μmol, 315 μmol, dan 171 μmol, mengindikasikan 0,2% Fe pada Fe-graphene/TiO2 dengan band gap 3,03 eV memberikan produksi hidrogen hingga 80% lebih tinggi dari TiO2 P25. Produksi hidrogen secara fotokatalitik dengan Fe-graphene/TiO2 dan sacrificial agent alkohol terungkap menurun dalam urutan gliserol > etilen glikol > metanol > propilen glikol > n-propanol. Korelasi diperoleh antara produksi hidrogen dengan sifat alkohol yang menjadi kunci, terutama jumlah α-H, polaritas, dan potensial oksidasi dari alkohol. ......Modifications of TiO2 in photocatalytic hydrogen production have been widely studied to resolve its limitation in utilizing visible light and electron-hole recombination, one of them is by the combination of graphene and Fe dopant. This study examines the effect of Fe concentration variations on Fe-graphene/TiO2 photocatalyst and polyalcohol sacrificial agent variations for hydrogen production. Photocatalyst characterization was conducted on TiO2 P25 and graphene/TiO2, Fe-graphene/TiO2 which were synthesized by impregnation method. XRD, SEM-EDX, UV-Vis DRS, and FTIR analysis showed the presence of graphene and Fe dopant on TiO2 with a crystal size for TiO2 P25, graphene/TiO2, and Fe-graphene/TiO2 were 17.68 nm, 17.66 nm, and 15.16 nm, respectively. Hydrogen production experiment was carried out for 5 hours in a reactor with internal illumination, equipped with 20W UV lamp, burette, and cooling water. GC analysis of gas sample on burette confirmed the formation of hydrogen. The accumulation of hydrogen products obtained for 0.2%, 0.5%, and 0.7% Fe were 394 μmol, 315 μmol, dan 171 μmol, respectively, indicating 0.2% Fe on Fe-graphene/TiO2 with a band gap of 3.03 eV provided up to 80% higher hydrogen production than TiO2 P25. Photocatalytic hydrogen production with Fe-graphene/TiO2 and alcohol as sacrificial agent was revealed to decrease in the order glycerol > ethylene glycol > methanol > propylene glycol > n- propanol. Correlations were established between hydrogen produced and key alcohol properties, notably the number of α-H, polarity, and oxidation potential of alcohol.
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fayola Adel Talitsa
Abstrak :
Minyak kelapa sawit mengandung beberapa pengotor termasuk asam lemak bebas yang dapat menurunkan kualitas produk. Konsentrasi asam lemak yang aman untuk dikonsumsi tidak lebih dari 0,3% menurut SNI. Umumnya, steam stripping digunakan untuk menghilangkan asam lemak, namun antioksidan alami juga ikut hilang dari minyak kelapa sawit karena suhu yang tinggi. Oleh karena itu, Deep Eutectic Solvent diinovasikan sebagai pelarut alternatif untuk proses ekstraksi asam lemak bebas pada minyak kelapa sawit dibandingkan dengan pelarut konvensional yang memiliki dampak negatif bagi kesehatan. Beberapa penelitian telah dilakukan untuk menghilangkan asam palmitat (sebagai asam lemak dengan konsentrasi tertinggi dalam minyak kelapa sawit) dengan menggunakan berbagai macam HBD dan HBA. Selain itu, asam oleat juga memiliki konsentrasi yang cukup tinggi, kedua setelah asam palmitat, yaitu sekitar 40% dari total asam lemak dalam minyak sawit. Dari penelitian ini, DES dengan kombinasi betaine anhidrat dengan 1,2-Heksandiol dengan rasio molar 1:9 memiliki kelarutan asam oleat yang paling tinggi dibandingkan dengan 1,2-Propandiol, 1,2-Butandiol, dan 1,2-Oktandiol. Hasil efisiensi ekstraksi sebesar 65% dengan empat tahap ekstraksi untuk mendapatkan konsentrasi asam oleat dalam minyak kelapa sawit di bawah 0,3%. Persentase perolehan DES dengan menggunakan metode pembekuan fraksional adalah 34,6%. Kandungan minyak sawit dalam fase ekstrak adalah 4% w/w dan kandungan DES dalam fase rafinat adalah 0,559% w/w. ......Palm oil contains several impurities including free fatty acid that could reduce the quality of the product. The concentration of fatty acid that is safe to be consumed is not more than 0,3% according to SNI. Generally, steam stripping was used to remove fatty acid, however the natural antioxidants were also removed from the palm oil due to their high temperature. Therefore, Deep Eutectic Solvent was innovated as the alternative solvent for the extraction process of free fatty acid in palm oil instead of using conventional solvents that have negative health effects. Several studies have been conducted to remove palmitic acid (as the highest concentration of fatty acid in palm oil) using various HBD and HBA. Besides that, oleic acid also has high concentration, second only to palmitic acid, around 40% of the total fatty acid in palm oil. From this research, DES with the combination of anhydrous betaine with 1,2-Hexanediol with the molar ratio of 1:9 has the highest solubility of oleic acid compared with 1,2-Propanediol, 1,2-Butanediol, and 1,2-Octanediol. The extraction efficiency result is 65% with four stages of extraction in order to obtain the concentration of oleic acid in palm oil below 0,3%. The percentage of the recovery of DES using the fractional freezing method is 34,6%. The palm content in extract phase is 4% w/w and DES content in raffinate phase is 0,559%.
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fadhriz Qadrul Amien
Abstrak :
Visualisasi adalah sebuah tampilan yang dapat membantu atau menciptakan sebuah gambaran dari objek yang ingin ditampilkan secara 3D. Pada kasus ini, Bioimaging adalah salah satu upaya untuk melihat sel-sel yang ada di dalamnya dengan cara sederhana, tetapi diharapkan dengan adanya visualisasi tambahan ini, maka dapat memudahkan dan membantu membaca sel-sel yang ada pada Bioimaging tersebut. Machine learning berperan sebagai penanda otomatis untuk sel-sel yang sudah ditandai atau yang sudah diplot sebelumnya, hal ini akan membantu mengurangi waktu yang akan dimakan ketika akan membaca sel-sel pada bioimaging. Perhitungan jumlah sel pada Bioimaging juga dibutuhkan oleh para dokter sel, karena itu perlu juga adanya pembaca otomatis untuk jumlah sel yang ada pada Bioimaging. Tujuan dari penelitian ini adalah merancang sebuah simulasi dalam rangka proses visualisasi dengan software open source Ilastik, ImageJ dan Vaa3D. Metode yang digunakan adalah metode kombinasi yaitu metode kualitatif dan metode kuantitatif, lebih spesifiknya yaitu model sekuensial atau berurutan. Perangkat lunak yang dikembangkan dapat menghasilkan visualisasi citra yang dipisah menjadi 2 bagian yaitu, bagian kualitatif dan bagian kuantitatif, kualitatif adalah bagian prediksi sel dengan Machine Learning pada Bioimaging, sementara kuantitatif adalah bagian perhitungan sel dari Bioimaging. Metode yang diusulkan memiliki akurasi perhitungan sel sebesar kurang lebih 75 persen, bergantung pada datanya. ......Visualization is a display that can help or create a picture of the object you want to display in 3D. In this case, Bioimaging is an effort to see the cells in it in a simple way, but it is hoped that with this additional visualization, it will make it easier and help to read the cells in the Bioimaging. Machine learning acts as an automatic marker for pre-tagged or plotted cells, this will help reduce the time it will take to read cells in bioimaging. Calculation of the number of cells in Bioimaging is also needed by cell doctors, because of that it is also necessary to have an automatic reader for the number of cells in Bioimaging. The purpose of this study is to design a simulation within the framework of the visualization process with the open source software Ilastik, ImageJ and Vaa3D. The method used is a combination method, namely qualitative methods and quantitative methods, more specifically, sequential or sequential models. The developed software can produce image visualization which is divided into 2 parts, namely, the qualitative part and the quantitative part, the qualitative part is the cell prediction part with Machine Learning in Bioimaging, while the quantitative part is the cell calculation part of Bioimaging. The proposed method has a cell counting accuracy of approximately 75 percent, depending on the data.
Depok: Fakultas Teknik Universitas Indonesia, 2022
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4   >>