Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 108 dokumen yang sesuai dengan query
cover
Isfan Hany Yaman
"Cluster analysis dari atribut seismik merupakan suatu metode yang digunakan untuk mengelompokkan litologi dari data seismik yang telah direkam dan diproses. Secara prinsip, cluster analisis memproyeksikan N atribut seismik ke sistem koordinat dengan N-dimensi yang menghasilkan K cluster yang merepresentasikan litologi yang berbeda. Penentuan center dari data dapat dilakukan secara acak yang kemudian berubah-rubah karena proses iterasi (unsupervised).
Dekomposisi spektral mengubah amplitudo seismik sebagai fungsi ruang dan waktu menjadi frekuensi, ruang, dan waktu. Dekomposisi spektral telah digunakan dalam berbagai aplikasi seperti penentuan ketebalan lapisan tipis, visualisasi stratigrafi, dan deteksi hidrokarbon secara langsung. Metode dekomposisi spektral yang biasa digunakan antara lain STFT (short-time fourier transform), CWT (continuous wavelet transform), dan EMD (Empirical Mode Decomposition).
Ada banyak atribut-atribut yang dapat diekstrak dari data seismik dan pemilihan atribut yang hanya dapat mempengaruhi distribusi litologi ini secara dominan bukan merupakan hal yang mudah karena pada kenyataannya beberapa atribut tidak memberikan kontribusi dalam pengelompokkan litologi. Untuk mengurangi hal itu, penulis menggunakan principal component analysis pada atribut seismik. Metode ini memilih atribut yang telah terotasi yang memberikan kontribusi untuk clustering berdasarkan urutan nilai eigen valuenya. Hasil yang didapatkan menunjukkan konsistensi dengan peta litologi yang sudah ada.
......
Cluster analysis of seismic attributes is a method used to classify the lithology of the seismic data that has been recorded and processed. In principle, cluster analysis of seismic attributes to transform the N system with N-dimensional coordinates that produce K clusters that represent different lithologies. Determination of center of data is done through a random process that later change of due process of iteration (unsupervised).
The spectral decomposition of seismic change amplitude as a function of space and time into the frequency, space and time. Spectral decomposition has been used in various applications such as thickness estimation for thin beds, visualization stratigraphy, reservoir characterization, and direct hydrocarbon detection. There are a variety of spectral decomposition methods, STFT (short-time Fourier transform), CWT (continuous wavelet transform), MPD (matching pursuit decomposition) and EMD (Empirical Mode Decomposition). The method used in this study is the method of EMD.
There are many attributes that can be extracted from seismic data and the selection of attributes that can only affect the distribution of the dominant lithology is not an easy thing because of the fact that some attributes do not contribute to the grouping of lithology. To reduce it, the author uses principal component analysis on seismic attributes. This method of selecting the attributes that have been rotated to contribute to clustering based on the sequence of eigenvalues valuenya. The results obtained show consistency with existing lithologic maps."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014;2014;2014
T42700
UI - Tesis Membership  Universitas Indonesia Library
cover
Dicky Eka Putera
"[ABSTRAK
Survei seismik pada wilayah padat penduduk banyak mengalami kendala baik dari segi teknis maupun sosial. Disatu sisi survei seismik harus dilakukan untuk mendapat data bawah permukaan secara langkap. Salah satu kunci sukses dalam sebuah survei seismik adalah bagaimana kita mendapatkan kualitas data seismik sebaik dan selengkap mungkin sesuai dengan program tanpa ada data yang hilang akibat suatu kendala dengan tetap memperhatikan segi teknis, keekonomian dan sosial. Prinsip dasar dalam survei seismik adalah dengan mempertimbangkan objektif/target bawah dengan rekayasa teknologi yang sudah ada untuk mempermudah dalam kegiatan survei. Tulisan ini akan memaparkan aplikasi air gun untuk kegiatan survei seismik darat pada area perkotaan. Survei seismik diperkotaan selalu mendapat kendala berupa hilangnya data near offset pada tempat tertentu karena tidak bisa menanam dinamit sebagai sumber gelombang. Aplikasi air gun pada seismik darat ini dilakukan dengan cara menggunakan air gun sebagai pengganti dinamit di area perkotaan. Diharapkan dengan menerapkan metode tersebut akan bisa didapatnya data near offset dan akan tetap menjaga kelengkapan data yang didapat tanpa mengurangi kualitas.

ABSTRACT
Seismic surveys in many densely populated areas have constraints in terms of both technical and social. On one side of the seismic survey should be done to get the data subsurface langkap. One of the keys to success in a seismic survey is how we get as good seismic data quality and complete as possible in accordance with the program without any data loss occurs due to a constraint with regard to technical, economical and social. The basic principle in the seismic survey is to consider the objective/target under ground with the existing technology to facilitate the activities of the survey. This article will explain the application of air gun for land seismic survey activities in urban areas. Urban seismic survey always have constraints to get near offset data at a certain place because can not plant the dynamite as a source of waves. Applications of air gun on land seismic is done by using an air gun as a replacement for dynamite in urban areas. Expected by applying this method for data acquisition there will be a posibilities to get near offset data and will continue to maintain the completeness of the data obtained without reducing the quality of the data, Seismic surveys in many densely populated areas have constraints in terms of both technical and social. On one side of the seismic survey should be done to get the data subsurface langkap. One of the keys to success in a seismic survey is how we get as good seismic data quality and complete as possible in accordance with the program without any data loss occurs due to a constraint with regard to technical, economical and social. The basic principle in the seismic survey is to consider the objective/target under ground with the existing technology to facilitate the activities of the survey. This article will explain the application of air gun for land seismic survey activities in urban areas. Urban seismic survey always have constraints to get near offset data at a certain place because can not plant the dynamite as a source of waves. Applications of air gun on land seismic is done by using an air gun as a replacement for dynamite in urban areas. Expected by applying this method for data acquisition there will be a posibilities to get near offset data and will continue to maintain the completeness of the data obtained without reducing the quality of the data]"
2015
T43779
UI - Tesis Membership  Universitas Indonesia Library
cover
Aria Perdana Abas
"ABSTRAK
Metoda pemodelan data petrofisika dilakukan untuk memberikan cara yang lebih
akurat dalam penentuan reservoar. Pemodelan yang diaplikasikan pada penelitian
ini adalah substitusi fluida Gassmann yang dilakukan pada reservoar batupasir
untuk melihat prilaku fluida pada kondisi tersaturasi air dan tersaturasi
hidrokarbon terhadap gelombang seismik. Penelitian ini dilakukan dengan
menggunakan data yang sudah dipublikasikan dari Lapangan Penobscot,
Cekungan Scotia Canada pada reservoar batupasir Formasi Mississauga, pada dua
data sumur yaitu L30 dan B41 serta data seismik 3D,
Analisa yang dilakukan dalam penelitian ini meliputi analisa parameter
petrofisika, analisa crossplot, substitusi fluida, pengikatan seismik dengan data
sumur dan perbandingan amplitudo data seismik. Substitusi fluida sendiri
melibatkan data log p-wave, s-wave dan densitas batuan karena ketiga log tersebut
sensitif terhadap pengaruh fluida yang berbeda dalam mengisi ruang dan pori,
Tiga elemen penting dalam metoda ini adalah fluida itu sendiri, rock frame dan
matrik pada mineral. Sedangkan perangkat lunak yang digunakan adalah
Hampson-Russel
Karakteristik pada kasus brine didapatkan nilai vp dan vs mengalami kenaikan
sedangkan nilai densitasnya turun terhadap kedaan awalnya. Pada kasus minyak
dan gas nilai densitasnya naik tetapi nilai vp dan vs-nya trurun terhadap keadaan
awalnya. Kemudian perbandingan antara data seismik real dan sintetik
menunjukan trend yang sama tetapi pada data real seismik memiliki noise yang
lebih besar. Perubahan prilaku amplitudo seismik pun terbukti pada sintetik untuk
kasus brine, kasus minyak dan kasus gas seiring dengan bertambahnya offset.

ABSTRACT
Petrophysical method of modeling data is done to provide reservoir determination
accurately. Gassmann fluids substitution is consider modeling to predict fluids
behavior on wet case and hydrocarbon saturated attached to seismic response for
the sand reservoir condition.. The study was conducted using published data from
the sands reservoir Missisauga Formation on Penobscot Field, Scotia Basin in
Canada, involving two wells available L30 and B41, also 3D seismic data
The analysis on this research include sensitivity analysis, crossplot analysis,
fluids substitution, well seismic tying, and comparison of amplitude. Fluids
substitution involves p-wave, s-wave and rocks density, because these three are
very sensitive on different fluids which fill pore and space. The most important
elements in this method is the fluids itself, rocks frame and minerals matrix.
Hampson-Russell software program is used to perform the fluids substitution
Characteristic of the brine case p-wave and s-wave values were increased while
the value of its density decreased. For oil and gas cases, the density value were
increased while the p-wave and s-wave values were decreased compare with the
insitu condition. Comparison between real-seismic and synthetics picking shows
the same trend although on real-seismic there were much noise than synthetics.
The amplitude changes performed on synthetic brine case, oil case and gas case
were proven with increasing offset"
2013
T44756
UI - Tesis Membership  Universitas Indonesia Library
cover
Aji Suteja
"ABSTRAK
Telah dilakukan penelitian delineasi subcekungan sedimen di cekungan Sengkang yang terletak di lengan bagian selatan Sulawesi. Delineasi subcekungan ini menggunakan kombinasi metode gaya berat dan magnetik, dimana cakupan data magnetik terbatas hanya didaerah Sengkang, sedangkan gaya berat tersebar diseluruh lengan bagian selatan Sulawesi. Berdasarkan analisis horizontal derivative dan second vertical derivative terhadap data gaya berat dan magnetik, subcekungan yang terbentuk dikontrol oleh patahan-patahan di lengan bagian selatan Sulawesi, terutama oleh patahan Walanae. Hasil analisis spektrum menunjukkan kedalaman rata-rata residual adalah 2 km dan kedalaman rata-rata regional sebesar 5,8 km. Hasil dari analisis horizontal derivative dan second vertical derivative yang di overlay dengan citra anomali residual dari gaya berat, dimana batuan dengan densitas tinggi seperti batuan ultrabasa, metamorf dan volkanik menjadi batas masing-masing subcekungan, sehingga terbentuk 8 subcekungan yaitu subcekungan A, subcekungan B, subcekungan C, subcekungan D, subcekungan E dan subcekungan F, subcekungan G dan subcekungan H. Batuan penyusun subcekungan ini diisi oleh batuan sedimen dari formasi Walanae yang dicirikan dengan densitas rendah dan anomali gaya berat yang rendah pula.

ABSTRACT
The delineation of sub basin has conducted at Sengkang basin that located in the southern part of Sulawesi arm. The delineation of sub basin using a combination of gravity and magnetic methods, where the magnetic data is limited, coverage only Sengkang area, while gravity station are scattered throughout the southern part of Sulawesi arm. Based on analysis of horizontal derivative and second vertical derivative of the magnetic and gravity data, sub basins formerd controlled by faults in the southern arm of Sulawesi, mainly by Walanae fault. The results of the spectrum analysis shows the average depth of residual is 2 km and the depth of the regional is 5.8 km. The results analysis of the horizontal derivatives and the second vertical derivative that are overlaid with the anomalies residual of gravity, where rocks with high density like ultramafics, metamorphic and volcanic be the edge for each sub basin, and there are 8 sub basin namely by sub basin A, sub basin B, sub basin C, sub basin D, sub basin E, sub basin F, sub basin G and sub basin H. Sub basin are filled by sedimentary rocks from Walanae formation that characterized by low density and low gravity anomaly."
2017
T47428
UI - Tesis Membership  Universitas Indonesia Library
cover
Siburian, Irwan Barlett
"ABSTRAK
Batugamping Formasi Kais merupakan reservoar utama penghasil hidrokarbondilapangan Asmorom yang berumur Miosen Tengah. Lapangan ini berada diCekungan Bintuni Papua Barat dan merupakan bekas peninggalan Belanda.Penelitian ini bertujuan untuk melakukan detail fasies pengendapan dan prosesdiagenesis serta rock typing diharapkan dapat memberikan hasil yang lebih baikuntuk melihat karakteristik reservoar karbonat dan potensinya. Batugamping Kaisdiidentifikasi menjadi tiga unit yaitu lapisan Kais Atas, Kais Tengah, dan Kais Bawah yang berasosiasi menjadi lima fasies yaitu fasies shelf, front reef, interreef, back reef, dan core reef. Asosiasi fasies ini diinterpretasikan sebagai fasieskarbonat platform. Kualitas reservoar ini direview dari asosiasi fasies, analisispetrografi dan biostratigrafi, memperlihatkan bahwa lapisan atas dan bawahdikontol oleh proses diagenesis kompaksi dan porositas rekahan sedangkanlapisan bawah dikontrol oleh proses diagenesis dolomitisasi, pelarutan, danporositas rekahan.

ABSTRACT
Kais Formation limestone is the main reservoar that produce hydrocarbon inAsmorom field in Middle Miocene. This field is located at Bintuni Basin WestPapua and used to run by Ducth company. The researchs proposed to do detaildepositional facies and diagenesis process with rock typing to characterize thepotential of carbonate reservoir. Kais Limestone can be identified in to threemembers namely Upper Kais, Middle Kais, and Lower Kais which are associatedin five different faciesnamely shelf, front reef, inter reef, back reef, and core reeffacies. The facies associations are interpreted as reefal platform carbonate. Thereservoir quality, which is reviewed from facies association, petrography andbiostratigraphy analysis shows that the Upper and Middle kais are controlled bycompaction diagenesis and fractures porosity, in another hand the Lower Kais iscontrolled by dolomitization diagenesis, dissolution, and fractures porosity."
2017
T46910
UI - Tesis Membership  Universitas Indonesia Library
cover
Resha Ramadian
"ABSTRAK
Peristiwa kick atau blowout merupakan masalah serius yang diakibatkan overpressure. Predikasi tekanan formasi diperlukan untuk mendesain berat jenis lumpur dan lokasi kedalaman casing yang tepat agar tidak terjadi masalah akibat overpressure. Selain itu, optimalisasi lokasi sumur juga dapat dilakukan sebelum pemboran dengan bantuan prediksi tekanan formasi. Penelitian ini menggunakan beberapa teknik untuk mendapatkan model kecepatan yang sesuai untuk analisa prediksi tekanan pori. Model kecepatan yang dilakukan adalah pemodelan dari kecepatan rata-rata (Va). Selanjutnya, model kecepatan rata-rata tersebut akan ditrasformasi untuk mencari tekanan efektif (effective stress). Kecepatan rata-rata tersebut didapatkan dengan beberapa metode, yang meliputi: dix-velocity inversion, model kecepatan rata-rata dari data checkshot dan post-stack impedance inversion. Selanjutnya, ketiga hasil kecepatan tersebut dikombinasikan untuk memperoleh model kecepatan dengan resolusi tinggi yang sesuai untuk prediksi tekanan efektif dan tekanan pori. Dari hasil prediksi tekanan pori di atas memperlihatkan penyebaran dari zona overpressure pada Formasi Brownshale. Penyebaran zona tersebut hanya berada di sekitar sumur Y-03 yang memang terbukti ditemukan zona overpressure. Penyebaran ini menjadi penting untuk membantu dalam program pengeboran di Area-K.

ABSTRACT
Kick problem or blowout is serious problem affected by overpressure phenomena. Using the pore pressure prediction to guide the choice of mud weight and casing point should help to alleviate lost circulation or kick problems. Also, well location can be optimizing using information from pore pressure prediction. To reach for such target, it was decided to build reliable pore pressure cube from velocity-to-pore pressure transform over the entire K- Field. An integrated geological and geophysical technique for pressure prediction has been developed, where pore pressure can be transformed from velocity cube that derived from several methods. It can be from seismic velocity data only (stacking velocity) or calibrated with offset wells (check shot) or using seismic inversion data. This study presents those methods on creating velocity cube for pore pressure prediction. Velocity cube here is referred to velocity average cube. And next, the velocity cube is transformed using Bower?s Methods to determine velocity to effective stress transformation. The pore pressure prediction result shown that overpressure zone exhibit in Brownshale Formation. Their distribution located around Y-03 Well as known as overpressured well. This cube will give important information on distribution."
Universitas Indonesia, 2010
T29113
UI - Tesis Open  Universitas Indonesia Library
cover
Dede Suherman
"Daerah Penelitian (Struktur "D") terletak Kecamatan Toili Barat, Kabupaten Banggai, Provinsi Sulawesi Tengah. Reservoir Struktur "D" berupa batuan karbonat dengan facies reef, diendapkan pada Miosen Atas. Reservoir ini dikelompokkan kepada Anggota Mentawa, Formasi Minahaki. Stuktur ini terbentuk oleh sesar mendatar yang berarah NE-SW. Diatas reservoir ini diendapkan shale Formasi Poh yang berfungsi sebagai batuan penutup (seal) yang berumur Piosen. Jebakan pada struktur ini didomisasi oleh jebakan stratigrafi karena sembulan reservoir yang berupa reef ditutupi oleh shale. Porositas reservoir berkisar antara 0.2 ? 0.325, dengan permeabilitas absolut 4 ? 40 md.
Studi Kelayakan dilakukan untuk melihat secara petrofisika seismik apakah ada kolom gas atau tidak. Studi ini meliputi cross-plot P-Impedans vs S-Impedans, Lambda-Rho vs Mu-Rho, Poisson Ratio vs Velocity Ratio, dan Pemodelan AVO sintetik pada tiap sumur. Juga dilakukan studi Elastik Impedans untuk menentukan sudut EI (θ) yang berkorelasi dengan keberadaan gas.
Untuk menentukan sebaran porositas, inversi akustik impedans digunakan sebagai parameter untuk menentukan porositas dan inversi tersebut dilakukan dengan batasan model Top MioCarbonate (-125 ms) ? Top Minahaki (+300 ms). Top Minahaki adalah batas antara karbonat platform di bawah dan reef (Anggota Mentawa). Porositas pada reservoir ini tersebar bagus.
Distribusi penyebaran gas dapat diamati melalui Product (A*B), parameter Scaled Poisson Ratio Change (∆σ), Lambda-Rho, Kombinasi P-Impedans dan SImpedans, Inversi Elastik Impedans, serta Fluid Inversion.
Hasil analisis terhadap sebaran gas pada Formasi Minahaki, dapat diamati kemungkinan sebaran gas di bagian selatan Struktur ?D?, walaupun sebaran tersebut dibawah kontak gas air (-1720 m TVDSS). Sebaran gas ini dianggap sebagai cadangan upside potensial sebesar 120.336 Bscf gas. Untuk membuktikan adanya gas ini, di usulkan pemboran dua sumur delineasi Del-AA dan Del-BB (LAMPIRAN LEPAS).
......Study area ("D" Structure) on West Toili Residence, Banggai District, Central Sulawesi Province. The typical ?D? Structure is limestone with reef facies, deposited in Upper Miocene. This reservoir grouped into Mentawa Member, Minahaki Formation. This Structure is formed by wrench fault, which has trend NESW.
Above this reservoir, deposited shale of Poh Formation, which is functioned as of Pliocene. Trap at this structure is dominated by stratigraphic trap because of reservoir reef build-up covered by shale. Reservoir porosity is around 0.2 ? 0.325, and absolute permeability 4 ? 40 md Sensitivity analisis is performed to know seismic petro physics whether there is gas column or not. These analysis include cross-plot P-Impedance vs. SImpedance, Lambda-Rho vs. Mu-Rho, Poisson Ratio vs. Velocity Ratio, and Synthetic AVO modeling on each well. Also performed Elastic Impedance Study to determine EI (θ) angle which correlated with gas content.
To determine porosity distribution, acoustic impedance inversion is used as parameter for determining porosity and it is performed on boundary between Top Miocarboate (-125 ms) to Top Minahaki (+ 300 ms). Top Minahaki is boundary between platform carbonate below and reef (Mentawa Member). The Porosity in this reservoir is well distributed.
The distribution of gas reservoir can be observed by using Product (A*B), Scaled Poisson Ration Change, Lambda-Rho, Combined P-Impedance vs. SImpedance, Elastic Impedans Inversion, and Fluid Inversion.
Our analysis to the gas reservoir distribution can be concluded that there are potential gas distribution at south part of ?D? structure, even though that distribution below gas water contact (-1720 m TVDSS). This gas can be assumed as upside potential whose resources about 120.336 Bscf gas. For proving this gas expected, proposed to drill two wells delineation Del-AA and Del-BB (ENCLOSURE)"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2010
T29107
UI - Tesis Open  Universitas Indonesia Library
cover
Budi Riyanto
"Membangun sebuah model reservoar membutuhkan informasi tentang parameter petrofisika. Parameter ini digunakan sebagai dasar dan masukan untuk analisis karakteristik reservoar yang akan digunakan sebagai penentu arah dan tujuan pengembangan reservoar. Adanya ketidak pastian distribusi spasial sifat petrofisika reservoar menimbulkan beberapa pertanyaan, bagaimana sebaran sifat petrofisika reservoar di setiap tempat dan ke mana arah penyebaran reservoar. Data seismik yang telah termigrasi terkadang masih memperlihatkan karakter refleksi yang kurang jelas sehingga menimbulkan ambiguitas dalam proses interpretasi. Dengan metode inversi seismik, jejak seismik dapat diubah menjadi impedansi akustik yang mewakili sifat fisik lapisan reservoar. Teknik ini mampu mempertajam bidang batas antar lapisan dan memperkirakan ketebalan lapisan. Telah dilakukan analisis AVO dan inversi seismik simultan untuk mengekstrak sifat petrofisika reservoar gas di lapangan Blackfoot. Dalam inversi simultan, Zp, Zs dan densitas dihitung secara langsung dari data pre-stack gather. Koefisien k, kc, m dan mc dihitung menggunakan data log sumur. ΔLS dan ΔLD merupakan deviasi antara data dengan hasil plot hidrokarbon. Setelah melakukan proses inversi dan mendapakan parameter impedansi P (Zp) dan impedansi S (ZS), proses selanjutnya adalah melakukan ekstrasi konstanta-konstanta elastik (inkompresibititas (λ) & rigiditas (µ)) dan melakukan cross-plot antara λρ vs µρ. Interpretasi kuantitatif dilakukan dengan memprediksi parameter-parameter petrofisika batuan dan arah penyebarannya. Interpretasi kualitatif untuk mengetahui tipe atau jenis batuan dan sebagai indikator ada tidaknya akumulasi hidrokarbon.
Hasil yang diperoleh menunjukan bahwa ketebalan zona target chanel Glauconitic yang diperoleh dari data sumur ± 7 m. Analisis AVO mampu mendeteksi keberadaan gas di lapangan Blackfoot tetapi hasilnya masih menimbulkan ambiguitas dalam interpretasi. Keberadaan zona gas terdeteksi di sekitar sumur 01-17 terbukti dengan nilai positif dari secondary attribute product (A*B) dan anomali negatif dari secondary attribute scaled Poisson's ratio. Pemisahan gas jelas terlihat dari hasil inversi simultan parameter petrofisiska Lambda - Rho. Sifat petrofisika ini dikaitkan dengan sifat inkompresibilitas fluida. Nilai Lambda - Rho yang kecil mengindikasikan adanya gas di area ini. Dari hasil penelitian ini secara keseluruhan disimpulkan bahwa lapangan Blackfoot merupakan reservoar sand, di mana pada lokasi sekitar sumur 01-17 berisi gas. Gas tersebar secara terbatas di sekitar sumur 01-17

Reservoir model building needs petrophysical parameter information. This parameter is used as a base and input to analyze the characteristic of the reservoir which will be used as a guidance for reservoir development. The uncertainty of spatial distribution of the reservoir's petrophysic leads to questions, how is the spreads of the petrophysical parameter and where is the direction of the reservoir extension. Migrated seismic data sometime shows unclear reflection character which causing ambiguity in the interpretation. With seismic inversion method, seismic trace can be changed into acoustic impedance which represent the physical property of the reservoir layer. This technique enhance the layer boundary and give an estimation of layer thickness. An AVO analysis and simultaneous seismic inversion have been applied to extract the petrophysic property of gas reservoir in Blackfoot field. In simultaneous inversion, Zp, Zs and density calculated directly from pre-stack gather data. k, kc, m and mc calculated using well log data. ΔLS and ΔLD are the deviation between data with hydrocarbon plot result. After the inversion process and generationg Pimpedance parameter (Zp) and S-impedance (Zs), the next process is to extract elastic constants (incompressibility (λ) & rigidity (µ)) and generate a cross-plot between λρ vs µρ. Qualitative interpretation has been done by prediction of rock petrophysic properties and direction of its extends. This interpretation is used to determine the rock type and as an indicator of hydrocarbon existence.
The result shows that the thickness of the target zone Glauconitic channel which is given by the well data is ± 7 m. AVO analysis is able to detect the gas existence in Blackfoot field, but the result is still giving ambiguity in interpretation. The gas zone detected in the surrounding of well 01-17, proved by the positive value of secondary attribute product (A*B) and the negative anomaly of secondary attribute scaled Poisson's ratio. Gas separation is clearly visible as a result of simultaneous inversion from petrophysical parameter Lambda - Rho. This petrophysical properties is then correlated with the fluid incompressibility. Small value of Lambda - Rho indicates the gas existence in the area. From the result of this research it is concluded that in general the Blackfoot field is a sand reservoir, where in the location near well 01-17 is filled with gas. The gas has a limited spreads arround well 01-17"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2010
T27900
UI - Tesis Open  Universitas Indonesia Library
cover
Yoese Mariam
"Data Rock Physics adalah alat untuk identifikasi fluida, perhitungan dalam reservoar, dan bagian penting dalam studi substitusi fluida untuk memodelkan berbagai macam fluida. Thesis ini merupakan hasil dari penelitian dua sumur untuk melihat pengaruh dari batuan dan properti fluida terhadap respon seismik. Kedua sumur tersebut adalah (YM-232 dan YM-247) merupakan oil well yang menunjukkan pengaruh dari substitusi hidrokarbon dengan air. Akibat dari substitusi fluida terhadap batuan dan properti fluida menunjukkan respon tertentu pada refleksi amplitude, variasi amplitude tersebut dapat digunakan sebagai guide untuk memperkirakan penyebaran jenis fluida pada lapangan YM. Pertama dengan melakukan sintetik pada keadaan insitu. Diikuti dengan sintetik pada kondisi tersaturasi (FRM), dengan manganggap bahwa fluida adalah air/minyak dan mineral adalah batu pasir bersih. Amplitude ini akan diekstrak untuk dikorelasikan dengan data seismic yang sebenarnya. Koefisian korelasi yang memiliki nilai tinggi (~1) dijadikan sebagai model untuk memprediksi tipe fluida pada area prospek yang didasarkan pada informasi amplitude dari data seismik. Dengan kata lain, kita dapat memahami efek dari saturasi hidrokarbon terhadap synthetic offset gathers. Analisis ini digunakan sebagai salahsatu parameter untuk mengembangkan interpretasi data seismic 3D & untuk menekan/mengurangi resiko pengeboran.
......Rock physics data is a tool for fluid identification and quantification in reservoir, and also plays an important part in any fluid substitution study that may provide a valuable tool for modeling various fluid scenarios. This thesis presents the results of the two well cases where the effect of rock and fluid properties on seismic response are illustrated. Both of wells (YM-232 and YM-247) show the effect of replacing hydrocarbons with brine. This effectt illustrates how rock and fluid properties along with reflection amplitudes can be used to estimate fluid type in YM field. First synthetic using the original case. And the other synthetic by using FRM case, with an assumption that the fluid was brine/oil and the mineralogy was clean sand. These amplitude was extracted to be correlated with the real seismic data. Finally, a good correlation was obtain from a model to estimate the fluid type in prospect based on amplitude information in seismic data. In other word, we can understand the effect of hydrocarbon saturation on synthetic offset gathers. This analysis can be use as one of parameter to improve seismic 3D interpretation and to reduce drilling risk."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2009
T21579
UI - Tesis Open  Universitas Indonesia Library
cover
Rainer Arief Troa
"Potensi sumberdaya hidrokarbon terutama minyak dan gas bumi di cekungan busur muka (forearc basin) masih belum banyak yang tersingkap. Kendala utama yang menyebabkan tahapan kegiatan eksplorasi di lokasi cekungan busur muka ini terlihat berjalan lambat adalah karena data dan informasi mengenai sistem hidrokarbon di sana masih sangat sedikit, serta lokasinya yang berada di laut dalam (frontier area). Dalam penelitian ini, berdasarkan hasil pengolahan dan analisis data seismik dan penerapan metode AVO diketahui terdapat indikasi kehadiran hidrokarbon di dalam Cekungan Busur Muka Lombok. Penentuan model dan estimasi parameter fisis terhadap respon seismik yang digambarkan oleh sintetik seismogram terhadap offset atau sudut datang berdasarkan konsep analisis AVO, dapat memberikan informasi sifat fisik yang mendekati karakteristik batuannya seperti nilai kecepatan gelombang P (Vp), kecepatan gelombang S (Vs), dan densitas (ρ), sehingga nilai Rasio Poisson (σ) yang sangat berati dalam mendeterminasi kandungan fluida dalam batuan dapat dihitung.
......Potency of hydrocarbon resources especially oil and gas in forearc basin still not yet been expressed. The resistance causing step activity of exploration in forearc basin walk tardyly is because information and data concerning hydrocarbon system over there still very few, and also the location of residing in deep sea (frontier area). In this research, based on seismic data processing and analysis result and applying of AVO method known that there are indication presence of hydrocarbon in Lombok Forearc Basin. Determination of parameter estimation and model to seismic respon depicted by seismogram synthetics to offset or angle of incidence pursuant to AVO analysis concept, can give information of physical properties closing to the rock characteristic like a P wave velocity (Vp), S wave velocity (Vs), and density (ρ), so that Poisson?s Ratio (σ) which is very mean in determination of fluid in rock can be calculated."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2009
T21597
UI - Tesis Open  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>