Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 61 dokumen yang sesuai dengan query
cover
Mario Firmansyah A.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2004
S28767
UI - Skripsi Membership  Universitas Indonesia Library
cover
Adrian Oktavinta
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2004
S28810
UI - Skripsi Membership  Universitas Indonesia Library
cover
Benyamin Heryanto Rusanto
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2004
S28813
UI - Skripsi Membership  Universitas Indonesia Library
cover
Siti Hajija Rumaru
Abstrak :
Konversi energi surya ke panas merupakan metode penting untuk pembangkit listrik, pemurnian air dan desalinasi dengan menggunakan material fototermal. Sistem evaporasi fototermal memanfaatkan material fototermal yang dapat mengkonversikan sinar matahari menjadi panas untuk menguapkan air. Penguapan air yang digerakkan oleh tenaga surya adalah teknologi yang menjanjikan untuk pemurnian air dengan efisiensi tinggi dengan menyerap energi matahari dan diubah menjadi panas, dimana uap air ini akan mengalami kondensasi untuk menghasilkan air bersih. Disini, digunakan Molibdenum disulfida (MoS2) sebagai material fototermal karena karakteristiknya yang memiliki spektrum penyerapan yang luas pada daerah cahaya tampak. Dalam upaya pengembanganya, diketahui bahwa MoS2 menunjukkan kinerja fototermal yang sangat baik dan dapat dihasilkan melalui metode sintesis hidrotermal yang relatif sederhana, melalui metode sintesis hidrotermal yang relatif sederhana, MoS2 dengan tingkat kemurnian yang tinggi dapat diperoleh. Di samping melakukan pengembangan melalui berbagai metode sintesis, pendekatan lain dapat dilakukan dengan meningkatkan sifat dari MoS2 itu sendiri melalui perlakuan doping Cobalt. Di sini, kami mengamati pengaruh doping Co terhadap mikrostruktur, morfologi, sifat optik, dan kinerjanya dalam proses evaporasi air. Hasil pengujian kinerja evaporasi sistem fototermal menunjukkan bahwa sampel Co:Mo 1:10 memiliki laju evaporasi tertinggi, yaitu sebesar 2,65 kg/m2h. Laju evaporasi sampel Co:Mo 1:10 memiliki nilai 1,6 kali lebih tinggi apabila dibandingkandengan laju evaporasi matriks ALP dan 1,1 kali lebih tinggi jika dibandingkan dengan sampel MoS2 tanpa doping Cobalt. Berdasarkan hasil ini, dapat disimpulkan bahwa doping Cobalt dapatmeningkatkan kinerja MoS2 sebagai material fototermal yang dapat menyerap cahaya matahari dengan baik sehingga dapat dimanfaatkan dalam upaya pemerolehan air bersih. ...... Converting solar energy to heat is an important method for power generation, water purification and desalination using photothermal materials. Photothermal evaporation systems utilize photothermal materials that can convert sunlight into heat to evaporate water. Solar powered evaporation is a promising technology for high-efficiency water purification by absorbing solar energy and converting it into heat, where this water vapor condenses to produce clean water. Here, Molybdenum disulfide (MoS2) is used as a photothermal material because of its characteristic which has a broad absorption spectrum in the visible light region. In its development efforts, It is known that MoS2 exhibits very good photothermal performance and can be produced by a relatively simple hydrothermal synthesis method, MoS2 with a high level of purity can be obtained. In addition to developing through various synthesis methods, another approach can be taken by improving the properties of MoS2 itself through Cobalt doping treatment. Here, we observe the influence of Co doping on its microstructure, morphology, optical properties and performance in the water evaporation process. The results of the photothermal system evaporation performance test showed that the Co:Mo 1:10 sample had the highest evaporation rate, which was 2,65 kg/m2h. The evaporation rate of the Co:Mo 1:10 sample has a value of 1,6 times higher when compared to the evaporation rate of the ALP matrix and 1,1 times higher when compared to MoS2 samples without Cobalt doping. Based on these results, it can be concluded that Cobalt doping can improve MoS2 performanceas a photothermal material that can absorb sunlight well so that it can be used in efforts to obtain clean water.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Faiz Adela
Abstrak :
ABSTRAK
Nanopartikel logam memiliki sifat optik unik yang disebut Localized Surface Plasmon Resonance (LSPR) yaitu peristiwa resonansi antara cahaya datang dengan elektron di permukaan logam yang mengakibatkan serapan dan hamburan cahaya di permukaan nanopartikel menjadi sangat kuat. Sifat ini berpotensi kuat untuk diaplikasikan dalam berbagai keperluan seperti devais optoelektronika dan biomedis. Untuk beberapa keperluan, diperlukan nanopartikel emas yang tumbuh langsung di permukaan substrat secara merata dengan ukuran yang homogen dan biaya yang rendah. Untuk keperluan tersebut, maka dalam penelitian ini dilakukan sintesis nanopartikel emas di atas permukaan substrat ITO dengan metode seed mediated growth. Dalam penelitian ini dikaji pengaruh konsentrasi bahan precursor yaitu trisodium sitrat, asam askorbat dan CTAB serta waktu penumbuhan terhadap morfologi dan sifat plasmonik nanopartikel emas.. Morfologi nanopartikel emas dikarakterisasi menggunakan FESEM, struktur kristal dikarakterisasi menggunakan XRD dan sifat plasmonik dikarakterisasi dengan mengukur nilai serapan optiknya menggunakan spektrometer UV-Vis. Hasil penelitian menunjukkan bahwa nanopartikel emas yang tumbuh sebagian besar berstruktur Face Centered Cubic (FCC) dengan orientasi (111). Peningkatan konsentrasi trisodium sitrat dalam larutan pembenihan dari 10, 25 hingga 50 mM memicu terjadinya aglomerasi nanopartikel emas, sehingga konsentrasi trisodium sitrat yang optimum adalah 10 mM. Peningkatan konsentrasi asam askorbat dari 0.05 hingga 0.1 M meningkatkan diameter nanopartikel dari 36 nm menjadi 42 nm dan penggunaan konsentrasi 0.4 M menghasilkan aglomerasi nanopartikel. Penggunaan CTAB sebagai surfaktan yang paling optimum adalah 0.1 M karena menghasilkan nanopartikel berdiameter 44 nm dengan tingkat keseragaman yang paling tinggi. Peningkatan waktu pertumbuhan dari 2, 8 hingga 16 jam telah meningkatkan jumlah nanopartikel yang terbentuk dari 671, 710 menjadi 868 nm yang menyebabkan intensitas serapan optik meningkat tajam dari 0.1 menjadi 0.28.
ABSTRACT
Localized Surface Plasmon Resonance (LSPR) is a unique properties from metal nanoparticles which caused by resonance between incident light and electron on metal surface and inflict absorption and scattered light become extremely strong on metal nanoparticles’ surface. This properties could be applied to optoelectronic device and biomedic. For some reason, gold nanoparticles needed to grown directly on the substrate surface evenly with a homogenous size and low cost. For that reason, gold nanoparticles synthesized on ITO substrate with seed-mediated growth method. This research intend to study the effect of trisodium citrate, ascorbic acid, CTAB and growth time for plasmonic, morphology dan crystal structure characteristic and looking for an effective amount of precursor for the gold nanoparticles grown on the substrate ITO. The plasmonic characterization measured by UV-Vis spectrophotometer to quantify absorbance value of gold nanoparticles. The morphology characterization measured by FESEM to quantify diameter and distribution of gold nanoparticles. The crystal structure characterization measured by XRD. The results show that gold nanoparticles are grown mostly structured Face Centered Cubic (FCC) with orientation (111). Increasing concentrations of trisodium citrate in the sedding solution from 10, 25 to 50 mM triggering agglomeration on nanoparticles, so the optimum concentration of trisodium citrate is 10 mM. Increasing concentrations of ascorbic acid from 0.05 to 0.1 M increase the diameter of nanoparticles from 36 nm to 42 nm and the use concentration 0.4 M produce agglomeration of nanoparticles. The use of CTAB as the most optimum consentration is 0.1 M, produce nanoparticles with diameter 44 nm with the highest level of uniformity. Increasing growth time from 2 to 16 hours increasing amount of nanoparticles with increased absorpsion intensity.
2015
S59546
UI - Skripsi Membership  Universitas Indonesia Library
cover
Vinanda Putritama
Abstrak :
(ZnO) merupakan salah satu semikonduktor dengan celah pita lebar yang hanya aktif di bawah sinar ultraviolet sehingga membatasi kinerjanya sebagai fotokatalis. Sebaliknya, molibdenum disulfida (MoS2) adalah salah satu dari logam transisi dichalcogenide dengan celah pita kecil yang menghasilkan absorbansi kuat pada daerah cahaya tampak dalam spektrum cahaya. Oleh karena itu, fabrikasi nanokomposit ZnO/MoS2 diharapkan dapat meningkatkan penyerapannya di daerah ultraviolet dan cahaya tampak. Pada penelitian ini, nanorod ZnO disintesis di atas substrat kaca melalui dua proses yaitu ultrasonic spray pyrolysis dan metode hidrotermal sedangkan nanosheet MoS2 dieksfoliasi dengan metode eksfoliasi fasa-cair dengan dua waktu yang berbeda, yaitu 4 dan 8 jam. Morfologi dan struktur dari sampel dikarakterisasi dengan menggunakan FESEM, TEM, XRD, XPS, dan spektroskopi Raman sedangkan sifat optiknya dianalisa dengan DRS, UV-Vis dan spektroskopi Photoluminescence. Fasa MoS2 dalam nanokomposit ZnO/MoS2 tidak terdeteksi oleh XRD tetapi berdasarkan hasil FESEM terlihat ada MoS2 yang menempel di atas permukaan ZnO. Keberadaan MoS2 juga dikonfirmasi berdasarkan spektrum XPS yang menunjukkan bahwa ada ikatan Mo-S dan S-Zn serta spektrum Raman yang menunjukkan adanya mode vibrasi yang berasal dari ikatan Mo-S. Eksfoliasi MoS2 selama 8 jam menghasilkan jumlah lapisan yang lebih sedikit yaitu 3 lapisan dibandingkan eksfoliasi selama 4 jam yaitu 11 lapisan yang sesuai dengan hasil TEM dan nilai bandgap yang bertambah sebesar 0,12 eV. Hasil degradasi metil biru oleh nanokomposit ZnO/MoS2 menunjukkan bahwa nanosheet MoS2 mengurangi aktivitas fotokatalitik dari ZnO, hal tersebut berkaitan dengan jumlah lapisan dan sudut kontak dari MoS2. ......As a wide bandgap semiconductor, Zinc Oxide (ZnO) is mainly active under UV light that limits its performance as a photocatalyst. In other hand, molybdenum disulfide (MoS2) is one of transition metal dichalcogenides with a narrow bandgap which exhibits strong absorption in visible region of solar spectrum. Therefore, the fabrication of ZnO/MoS2 nanocomposite was expected to enhance its absorption in UV and visible regions. In this work, ZnO nanorods were synthesized on glass substrates via a two-steps process of ultrasonic spray pyrolysis and hydrothermal methods while MoS2 nanosheets were exfoliated via liquid-phase exfoliation with two different exfoliation times, i.e. 4 and 8 hours. The morphology and structure of the samples were characterized by using FESEM, TEM, XRD, XPS, and Raman spectroscopy whereas the optical properties were analyzed by DRS, UV-Vis and Photoluminescence spectroscopy. The phase of MoS2 in ZnO/MoS2 nanocomposite was not detected by XRD but based on FESEM results it was seen that MoS2 nanosheets were attached to the surface of ZnO. The presence of MoS2 was also confirmed by the XPS spectrum which indicating that the Mo-S and S-Zn bonds exist and the Raman spectrum which show the vibrational modes of Mo-S bonds exist. The exfoliation of MoS2 for 8 hours resulted in MoS2 nanosheets with fewer layers which is 3 layers compared to the exfoliation of MoS2 for 4 hours which resulted in MoS2 with 11 layers and also the exfoliation of MoS2 for 8 hours increases the bandgap value of 0.12 eV. The degradation of methyl blue by ZnO/MoS2 nanocomposites results show that MoS2 nanosheets reduce the photocatalytic activity of ZnO which related with number of layers and contact angle of MoS2.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Suci Mufidah Winata
Abstrak :
Logam transisi decalchogenides (TMD) seperti molybdenum disulfide (MoS2) dan Tungsten disulfide (WS2) telah menarik banyak perhatian karena potensinya dalam aplikasi perangkat optoelektronik. MoS2 dan WS2 yang memiliki celah pita tunable merupakan material yang menjanjikan untuk meningkatkan rentang penyerapan cahaya pada detektor berbasis ZnO. Pada pekerjaan ini, kami melaporkan penggunaan monolayer MoS2 dan WS2 yang dideposisi pada permukaan nanorod ZnO menggunakan metode Spin-Coat untuk aplikasi fotodetektor UV-Vis. Respon fotoelektrik dari fotodetektor diamati menggunakan elektrometer di bawah penyinaran laser dioda (Thorlabs) 365, 505 dan 625 nm sebagai sumber UV dan cahaya tampak. Penggunaan metoda liquid eksfoliasi selama 8 jam dalam penelitian ini telah berhasil mensintesis nanosheet monolayer MoS2 dan WS2 yang terdiri dari 1-4 layer dengan band gap 2,23 eV dan 2,12 eV. seperti yang tercermin dari hasil TEM, spektroskopi Raman dan spektrum absorbansi larutannya. Penambahan nanosheet monolayer MoS2 dan WS2 pada ZnO nanorods terlihat tidak mempengaruhi mikrostruktur ZnO, memperlebar spektrum absorbansi dan emisi di daerah cahaya tampak. Nanokomposit ZnO/MoS2 dan ZnO/WS2 terbukti tidak sesuai untuk fotodetektor cahaya hijau (505 nm) maupun cahaya UV (365 nm) akibat peningkatan arus gelap yang menyebabkan turunnya nilai responsivitas, detektivitas dan sensitifitas. Struktur nanokomposit ZnO/WS2 dan ZnO/MoS2 menunjukkan kinerja yang lebih baik sebagai fotodetektor cahaya merah 625 nm tercermin dari kenaikan pada semua parameter responsivitas, detektivitas dan sensitifitas. ......Two dimensional layers of the transition metal decalchogenides (TMDs) such as molybdenum disulfide (MoS2) and tungsten disulfide (WS2) attract much attention due to their potential applications in optoelectronics devices. MoS2 and WS2 that has that tunable bandgap are the promising materials to enhance the light absorption range on ZnO-based photodetector. In this regard, we report the use of monolayers MoS2< and WS2 that deposited on the surface ZnO nanorods by spin-coat method for UV-Vis photodetector application. The photoelectrical response of photodetector were observed using electrometer under 365, 505, and 625 nm laser diodes (Thorlabs) as UV and visible light sources. This study show that the nanosheet monolayer MoS2 and WS2 which consists of 1-4 layers with a band gap of 2.23 eV and 2.12 eV has been succesfully sintesized by using liquid exfoliation method for 8 hours as reflected in the TEM results, Raman spectroscopy and the absorbance spectrum of the those solution. The addition of nanosheet monolayer MoS2 and WS2 in ZnO nanorods appear do not affect to ZnO microstructure, widening the absorbance and emission spectrums in visible light regions. Nanocomposite ZnO/MoS2 and ZnO/WS2 were seen to be unsuitable for green light (505 nm) and UV light (365 nm) photodetectors due to an increase in dark currents which caused a decrease in responsivity, detectivity and sentivity. The Nanocomposite ZnO/WS2 and ZnO/MoS2 shows better performance for red light (625 nm) photodetector reflected in the increase in all parameters of responsivity, detectivity and sensitivity.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Rizantia Anggraini
Abstrak :
ABSTRAK
ABSTRACT
ZnO is one of the potential semiconductors for photodetector application. However, the responsivity and the time responses are still low and need more improvement. Therefore, the nanohybrid between ZnO and the transition metal decalchogenides (TMDs) is a promosing structure could increase the photodetector performance. In this study, ZnO nanorods structure was fabricated on the interdigitated indium tin oxide (ITO) electrode on glass substrate via ultrasonics spray pyrolysis and hydrothermal method, then MoS2 nanosheets with two different liquid exfoliation times (4 and 8 hours) were deposited on ZnO nanorods by spin-coating method. In this study it has been shown that the variation of exfoliation time of 4 and 8 hours produces MoS2 nanosheets that are almost the same number of layers, namely 3-6 layers. However, MoS2 8H can be deposited much more onto the surface of ZnO nanorods. Generally, this study shows that the addition of MoS2 can improve the performance of the ZnO nanorods photodetector in both the UV region and the visible light. Based on the increase in the value of Responsivity, Detectivity and Sensitivity, the addition of MoS2 8H produces the best nanohybrid MoS2/ZnO structure especially for red light photodetectors (625 nm) due to the highest increase in photocurrent and high electron mobility in MoS28H.
2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Farah Fadhila
Abstrak :
ABSTRAK Seng oksida (ZnO) adalah bahan semikonduktor dengan bandgap 3,3 eV yang dapat digunakan sebagai material sensing. Namun ZnO berbasis sensor kelembapan masih mempunyai kekurangan yaitu kurang sensitif. Nanokomposit ZnO dengan bahan logam transisi dikalkogen (TMD) seperti molibdenum disulfida (MoS2) adalah salah satu cara untuk menaikkan performa sensing ZnO. Adanya n-n junction pada permukaan ZnO dan MoS2 dapat meningkatkan konduksi proton didalam lapisan air. Pada penelitian ini, nanorod ZnO disintesis diatas indium tin oxide elektroda dengan metode ultrasonic spray pyrolisis dan metode hydrothermal. MoS2 di eksfoliasi dengan metode eksfoliasi fase liquid dan di deposisi ke atas nanorod ZnO dengan metode spin coat. Respon kapasitif pada sensor berupa perubahan kelembapan relatif yang didapat dengan menggunakan gas chamber yang dapat divariasikan tingkat kelembapannya. Hasil eksfoliasi menghasilkan few-layer MoS2 yang terdiri dari 3-5 lapisan dengan bandgap 2,44 eV. Selain itu terdapat 51,68% MoO3 yang menunjukkan setengah dari MoS2 telah teroksidasi. Deposisi MoS2 1x pada ZnO menghasilkan kinerja sensor RH nanorod ZnO dengan peningkatan CResponse pada RH90% dari 1083 menjadi 1767, peningkatan sensitivitas dari 0,19 pF/%RH menjadi 0,31 pF/%RH, peningkatan kurva histerisnya dan penurunan waktu respon dan waktu pemulihan. Hal ini mungkin karena terbentuknya n-n junction antara permukaan ZnO dengan MoS2 sehingga akan muncul accumulation layer yang dapat meningkatkan respon terhadap kelembapan.
ABSTRACT Zinc oxide (ZnO) is a semiconductor material with a bandgap of 3.3 eV which can be used as sensing material. However, ZnO-based humidity sensor still has drawbacks such as poor sensitivity. The nanocomposite of ZnO with transition metal decalchogenides (TMDs) such as molybdenum disulfide (MoS2) is one approach to enhance the ZnO sensing performance. The formation of n-n junction at the interface ZnO and MoS2, it leads to improve the proton conduction inside water layers. In this work, ZnO nanorods were synthesized on the indium tin oxide electrodes via ultrasonic spray pyrolisis and hydrothermal methods. MoS2 were exfoliated with liquid phase exfoliation method and then spin-coated method on the surface of ZnO nanorods. The exfoliation process produced a few-layer MoS2 consisting of 3-5 layers with a bandgap of 2.44 eV. In addition, there are 51.68% MoO3 indicating that half of MoS2 has been oxidized. The deposition of MoS2 one time on ZnO nanorods enhance the performance of the RH sensor with an increase in CResponse at RH90% from 1083 to 1767, an increase in sensitivity from 0.19 pF/% RH to 0.31 pF/% RH, an increase in hysteresis curve and a decrease in response time and recovery time. This is probably due to the formation of n-n junctions between the surface of ZnO and MoS2 so that an accumulation layer could increase the response of sensor to humidity.
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Adam Dwiputra
Abstrak :
ABSTRAK
Seng oksida (ZnO) adalah salah satu kandidat yang menjanjikan sebagai bahan penginderaan kelembaban karena murah, stabilitas kimia dan termal yang baik, morfologi permukaan yang dapat dikontrol, dan tidak larut dalam air. Namun demikian, sensor kelembaban berbasis ZnO murni memiliki respon yang buruk dan histeresis besar yang membatasi aplikasinya. Untuk mengatasi masalah ini, banyak peneliti telah melaporkan peningkatan kinerja sensor kelembaban ZnO dengan doping, modifikasi permukaan, atau pencampuran dengan bahan lain. Dalam penelitian ini, sensor kelembaban tipe kapasitif dibuat dengan drop-coating larutan tungsten disulfida (WS2) pada ZnO nanorods (ZnO NRs) yang ditumbuhkan pada substrat kaca dengan elektroda indium tin oxide (ITO). Penelitian ini berhasil melakukan eksfoliasi WS2 menjadi material dua dimensi yang terdiri dari 3 lapis dengan celah pita 2,56 eV. Namun demikian selain WS2, fasa WO3 muncul dengan jumlah yang signifikan. Penambahan WS2 nanosheets pada permukaan ZnO nanorods sebagai sensor kelembaban dapat meningkatkan performa sensor kelembapan dimana dapat menurunkan histeresis sensor, meningkatkan respon dan sensitivitas menjadi 378% dan 101,71 fF/RH% pada kelembapan tinggi, sedangkan waktu respon dan pemulihan tidak menunjukan perubahan yang signifikan. Respon kapasitif disebabkan interaksi molekul air yang meningkatkan permitivitas relatif material. Selain itu, adanya akumulasi elektron pada junction interface dapat menjadi penyebab kenaikan laju disosiasi air dan menaikkan respon sensor.
ABSTRACT
Zinc oxide (ZnO) is one of the promising candidates for humidity sensing materials due to its low-cost preparation, good chemical and thermal stability, controllable surface morphology, and low solubility in water. However, pure ZnO based humidity sensors suffer from poor response and large hysteresis that further limit its applications. To overcome this problem, many researchers have reported on improving ZnO based humidity sensor by doping, surface modification, or mixing with other materials. In this study, a capacitive-type humidity sensor was prepared by drop-coating an aqueous solution of exfoliated tungsten disulfide (WS2) onto ZnO nanorods (NRs) grown on glass substrate containing pre-patterned indium tin oxide (ITO) electrode. This study succeeded in exfoliating bulk-WS2 into two dimensional material consisting of 3 layers with a band-gap of 2.56 eV. However, besides WS2, a significant amount of WO3 phase appears. The addition of WS2 nanosheets on the surface of ZnO nanorods resulting in improvement of humidity sensor performance by reducing sensor hysteresis, increased response and sensitivity to 378% and 101.71 fF/RH% at high humidity, while response and recovery time do not show significant changes. Capacitive response is due to the interaction of water molecules which increases relative permitivitty of materials. In addition, the formation of accumulation layer on the junction interface can cause an increase in water dissociation rate and therefore increase in sensor response.
2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7   >>