Analisis reboiler tipe shell and tube untuk sistem destilasi bioetanol yang terintegrasi dengan turbin gas mikro bioenergi PROTO X-2 = Analysis of shell and tube reboiler for bioethanol distillation system integrated with micro bioenergy gas turbine PROTO X-2
Hadid Fadilah;
Ahmad Indra Siswantara, supervisor; Steven Darmawan, supervisor; Engkos Achmad Kosasih, examiner; Irmansyah Ibnu Hakim, examiner; Warjito, examiner
(Fakultas Teknik Universitas Indonesia, 2012)
|
ABSTRAK Reboiler merupakan salah satu jenis alat penukar kalor yang berfungsiuntuk mendidihkan dan menguapkan fluida cair yang diproses. Pada penelitiankali ini dilakukan perancangan dengan menggunakan metode CFD untukmendapatkan desain reboiler dengan acuan pressure drop gas tidak lebih dari233,914 Pa dan flow rate air yang digunakan agar etanol yang keluar dari shellsudah dalam kondisi menguap. Proses penelitian juga disertai dengan prosespembuatan alat yang kemudian dilakukan proses pengukuran untuk nilai-nilaiyang diinginkan, seperti temperatur dan tekanan gas masuk dan keluar, temperaturetanol masuk dan keluar, dan temperatur dalam shell. Dari pengukuran tersebutdapat diketahui kondisi kerja optimal reboiler yang diintegrasikan dengan turbingas mikro bioenergi PROTO X-2 yang dimanfaatkan gas buangnya sebagai gasmasuk tube. Dari pengukuran yang dilakukan dengan variasi temperatur gas danflow rate air diperoleh kondisi teroptimal kerja reboiler adalah pada kondisi yangtidak jauh berbeda dari kondisi parameter simulasi, yaitu temperatur gas masuksebesar 350 oC dan flow rate air 36 kg/h. Kondisi operasi ini dapat menghasilkanflow rate uap terbanyak yaitu sebesar 0,018 kg/h dengan flow rate bahan bakaryang digunakan hanya sebesar 1,33 kg/h. ABSTRACT Reboiler is one of the heat exchanger type that function to boiling andvaporizing the liquid fluid processed. In this study was carried out design usingCFD method to get the reboiler design with reference pressure drop of gas is notmore than 233.914 Pa and flow rate of water are used in order to get ethanolcondition out of the shell is in an evaporate condition. The research process is alsoaccompanied by the construction of the measurement process is then carried to thedesired values, such as temperature and pressure inlet and outlet of gas,temperature inlet and outlet ethanol, and temperature in the shell. From thesemeasurements it can be seen working condition reboiler which is integrated withthe micro bioenergy gas turbine PROTO X-2 that the output of gas used as theinput gas into the tube. Measurements arranged with the variation of temperatureof gas and flow rate of water obtained the best working conditions of reboiler isthe conditions which is not much different from the conditions of the simulationparameters, namely the inlet temperature of gas is 350 °C and flow rate of water iswater 36 kg/h. These operating conditions can result the highest steam flow rate isequal to 0.018 kg/h with a flow rate of fuel used by only 1.33 kg/h. |
S42730-Analisis reboiler.pdf :: Unduh
|
No. Panggil : | S42730 |
Entri utama-Nama orang : | |
Entri tambahan-Nama orang : | |
Entri tambahan-Nama badan : | |
Penerbitan : | [Place of publication not identified]: Fakultas Teknik Universitas Indonesia, 2012 |
Program Studi : |
Bahasa : | ind |
Sumber Pengatalogan : | LibUI ind rda |
Tipe Konten : | text |
Tipe Media : | unmediated ; computer |
Tipe Carrier : | volume ; online resources |
Deskripsi Fisik : | xix, 98 pages ; 30 cm |
Naskah Ringkas : | |
Lembaga Pemilik : | Universitas Indonesia |
Lokasi : | Perpustakaan UI, Lantai 3 |
No. Panggil | No. Barkod | Ketersediaan |
---|---|---|
S42730 | TERSEDIA |
Ulasan: |
Tidak ada ulasan pada koleksi ini: 20308536 |