:: eBooks :: Kembali

eBooks :: Kembali

Surface modification technologies XIV: proceedings of the fourteenth International Conference on Surface Modification Technologies held in Paris, France, September 11-13, 2000

editors, T.S. Sudarshan, M. Jeandin (ASM International, 2001)

 Abstrak

Contents :
  • Foreword
  • Surface Modifications in Aerospace Applications
  • In Situ Formation of Titanium Carbide by Reactive Plasma Spraying with Elemental Titanium Powder
  • A Comparative Study of Mechanical Properties and Residual Stress Distributions of Copper Coatings Obtained by Different Thermal Spray Processes
  • Damage Progression in Thermal Barrier Coatings During Four-Point Bend Tests with Acoustic Emission Monitor
  • A Study of the Strength of Spray Coated Layer by Cross Sectional Electron Microscopy
  • A Comparative Study of Different Plasma Sprayed Coatings Applied to Railway Disc Brakes
  • Optimization and Monitoring of the Production of Thermal Barrier Coatings
  • Benefits of Surface Preparation by Laser for Thermal Sprayed Coatings
  • Fabrication of Ti02 Photocatalytic Coating by Thermal Spray Process
  • Indentation Fracture Toughness and Interfacial Indentation Tests Associated with Acoustic Emission on WC-Co Coated Specimens
  • Fatigue Processes in Bodies with Surface Coatings
  • Laboratory Evaluation of Hot Erosion Resistance of Six Thermal Sprayed Coatings
  • Vacuum Plasma Sprayed WC-12% Co Coatings: Optimization of Spraying Parameters and Subsequent Laser Treatment
  • Optical Properties of Al Film Deposited on Polymer
  • Slurry and Thermal Spray Coatings for Protection of New Generation Steam Engine Components
  • Surface State Modifications in Powder Products Induced by a Spray-Coating Technique
  • Relationship Between Dilution and Solidification Cracking in PTAW Ni-Base Superalloy Overlays
  • A Novel Friction Thermomechanical Process for Surface Modification of Aluminum Castings
  • Characterization and Modelling of Multilayer Ti-Based Coating
  • Electrolytic Deposits on Stainless Steel as High Temperature Coatings
  • Investigation of Ceramic Sol-Gel Thin Films for Wet Corrosion Protection of Mild Steel
  • Need for Environmentally Friendly Surface Modification Technology in the Japanese Automotive Industry
  • Development of Bioceramic Composites: Processing Solutions and In-Vitro Evaluations
  • Wear of Ultra High Molecular Weight Polyethylene Sliding Against a CoCrMo Coating Applied by Physical Vapor Deposition
  • Physico-Chemical and Mechanical Approaches to the Dentin-Resin Adhesive Interface
  • Surface Quality of Master Screw Dental Implant
  • Suspension Plasma Sprayed Hydroxyapatite Nano-Powder for Biomedical Application
  • Ceramographic Analysis of Ceramo-Metal Bonding Interfaces
  • A Nanoindentation Study of PVD WC/C Coatings Supported by Cross-Sectional Electron Microscopy Observations
  • Effect of a Ni Interlayer on the Corrosion Behavior of CrN PVD Coating Deposited onto Plastic Mold Steels
  • Structure of Diamond-Like Carbon Films Obtained by PECVD: XPS, X-Rays Reflectometry and Hardness Measurements
  • Application of Surface Modified Silica Thin Films to Biosensors
  • Surface Treatments and Coatings in the Steel-Making Industry: From Metallurgy to Processing
  • Changes in Structure and Properties of AIN Thin Films Due to Surface Oxidation
  • Carbo-Nitride Thin Films and Nanofibers Synthesized by HF-CVD
  • Effect of Various Plasma Nitriding Procedures on Surface Characteristics of P/M Ledeburitic Tool Steels
  • Characterization of PVD Ni Coatings Deposited at Various Conditions
  • Challenges and Opportunities in Surface Engineering
  • Correlations Between Surface Modification and Tribological Performance of Brake Pads
  • Development of Novel Fe-Cr-C/NbC Composite Materials for Wear Resistant Coatings Using a Laser Rapid-Alloy-Prototyping Technique
  • Dose Rate Influence on the Microstructure of Chromium Steels Subjected to Low-Energy Nitrogen Ion Implantation
  • Effect of Coatings on Mechanical Properties and Fretting Fatigue Strength of a Titanium Alloy in Cryotechnical Environment
  • Wear Behavior of Colored Stainless Steel
  • Wear Analysis of Coated Carbide Tools when Machining Nickel Base, Inconel, Alloy
  • Wear Modelling of Contact Plan/Plan Between Graphite and Titanium Alloy
  • Wear Criterion for Cold Forging Tool
  • Surface Modification of a FeCrAlY-Alloy by Ion Implantation and Oxidation for Potential Implant Applications
  • Functionally Graded Materials Produced by Laser Cladding: A Novel Approach
  • Improvement of Adhesive Properties of Polymers After Excimer Laser Irradiation
  • Properties and Applications of Coatings Deposited by Laser Beam
  • WC-Co Plasma Sprayed Coatings Partially Re-fused with Laser
  • Modeling of Temperature Fields in Graphite Target at Pulsed Laser Deposition of CNx Films
  • Laser Treatment of BN Pre-Coated Steels: Correlation of Hardness and Microstructure
  • Surface Alloying of Ceramic Powders on F

 File Digital: 1

Shelf
 Surface modification technologies XIV proceedings of the fourteenth international conference on surface modification technologies, held in Paris, France, September 11-13, 2000.pdf :: Unduh

LOGIN required

 Kata Kunci

 Metadata

No. Panggil : e20442523
Entri tambahan-Nama orang :
Subjek :
Penerbitan : Materials Park, Ohio: ASM International, 2001
Sumber Pengatalogan: LibUI eng rda
Tipe Konten: text
Tipe Media: computer
Tipe Pembawa: online resource
Deskripsi Fisik: xii, 648 pages : illustration
Tautan: http://portal.igpublish.com/iglibrary/search/ASMIB0000048.main.html?28
Lembaga Pemilik:
Lokasi:
  • Ketersediaan
  • Ulasan
No. Panggil No. Barkod Ketersediaan
e20442523 TERSEDIA
Ulasan:
Tidak ada ulasan pada koleksi ini: 20442523
 See also