Thermal spray 2003: advancing the science and applying the technology: proceedings of the 2003 International Thermal Spray Conference, 5-8 May, 2003, Orlando, Florida, USA
edited by Basil R. Marple and Christian Moreau (ASM International, 2003)
|
| Contents : - Numerical and Microstructural Investigations of the Bonding Mechanisms in Cold Spraying - High Strain Rate Deformation Phenomena in Explosive Powder Compaction and Cold Gas Spraying - Optimizing the Cold Spray Process - Modeling of Particle-Substrate Adhesive Interaction Under the Cold Spray Process - A Systematic Approach to Material Eligibility for the Cold Spray Process - Particle-Substrate Interactions in Cold Gas Dynamic Spraying - Evaluation Of Coatings Produced Via Kinetic And Cold Spray Processes - Potential Applications of Cold-Spray Technology in Automotive Manufacturing - Development of Cold Gas Sprayed Coatings - Cold Spray Copper Application for Upper Stage Rocket Engine Design - Kinetic Spray of Aluminum Metal Matrix Composites For Thermal Management Applications - Effect of Spray Angle on Deposition Characteristics in Cold Spraying - Cold Spraying – Equipment and Application Trends - Automated Cold Spray System: Description of Equipment and Performance Data - Helium Recovery: Design Considerations for Cold Spray Systems - Cold Spray Technology: An Industrial Perspective - Production Coating Cost Comparison - Thermal Spray Solutions For Diesel Engine Piston Rings - Low-Cost High-Performance Coatings Produced by Internal Plasma Spraying for the Production of High Efficiency Engines - Development of Thermal Spray for Automotive Cylinder Bores - 316L – an Alternative to NiCr Bondcoats for Cr2O3-Coatings on Anilox Rolls - Plasma-Sprayed Ceramic Coatings for Molten Metal Environments - Influence of Powder Size in Aluminum Oxide Coatings for Use in the Semiconductor Industry - Intermediate Temperature SOFC Based on Fully Integrated Plasma Sprayed Components - Investigation of the Photocatalytic Efficiencies of Plasma Sprayed Tio2-Fe3O4 Coatings - Protection of Titanium Alloy Surfaces by Thermal Spraying and Laser Treatment - Fabrication of TiO2 Photocatalytic Coatings on PET by Thermal Spraying - Photocatalytic Decomposition of Ammonia by Thermal Sprayed TiO2 Coatings - Optimization of Axial Injection Conditions in a Supersonic Induction Plasma Torch: Application to SOFCs - Methodology for Meeting Standards and Environmental Requirements in Thermal Spraying Hardfacing and Sand Blasting Erosion Resistance of Arc Spray Composite Coatings at High Temperature on Boiler Tubes of Pulverized Coal Fired Power Station - Assessing the Feasibility of Using Diamond as a Reinforced Phase in Metal Matrix Composite Coatings - New Carbide Based Materials for HVOF Spraying - Advanced Oxide Ceramic Coatings for Applications Demanding High Wear Resistance - Development and Application of WC-Cr3C2-Ni Coating with High Impact Resistance - Preparation and Characterization of Powders and Coatings Containing Solid Lubricants - Properties of Plasma and D-Gun Sprayed Metal-Matrix-Composite (MMC) Coatings Based on Ceramic Hard Particle Reinforced Fe-, Ni-aluminide Matrix - Ceramic Coating of Alloy 625 using Controlled Atmosphere Plasma Spraying for Sea Water Corrosion Protection - The Influence of Matrix Phase Viscosity on the Plasma-Spray Deposition Of Silicon-Nitride Composite Coatings - Influence of Rare Earth Elements on the Corrosion Resistance of Fe-Cr-Ni Thermal Sprayed Coatings - Process Temperature-Hardness-Wear Relationships for HVOF-Spraye Nanostructured and Conventional Cermet Coatings - A Parametric Study of an HVOF Process for the Deposition of Nanostructured WC-Co Coatings - Abrasion and Sliding Wear of Nanostructured Ceramic Coatings - Fatigue and Fracture Resistance of Nanostructured Composite System: Chrome Carbide – Hard Oxide Aluminum – Aluminum - Abrasion Wear Behaviour of Plasma and HVOF Sprayed Al2O3-SiC Nanocomposite Coatings - Effect of Powder Composition on the Microstructure and Wear Properties of Sprayed Cast Iron Coatings - Influence of Thermal Spray Process on the Corrosion Behavior of High-Density - Stainless Steel Coatings in Simulated Marine Environment - A New Spray Coating Process for Manufacture of Stainless Steel Clad Construction Steel with Resistance to Corrosion by De-icing Salts & Seawater - HVOF Reactive Spraying of Mechanically Alloyed Ni-Ti-C Powders - Marine Exposure Tests of Thermal Sprayed Coatings in Japan - Development of Dense Corrosion Resistant Coatings By an Improved HVOF Spraying Process - Protection of Steel Components Against Marine Corrosion by Thermally Sprayed Anodic Coatings - Development and Implementation of HVOF WC/Co/Cr Coating as Alternative to Electrolytic Hard Chrome Plate in Landing Gear Applications |
 Thermal spray 2003 advancing the science and applying the technology proceedings of the 2003 International Thermal Spray Conference, 5-8 May, 2003, Orlando, Florida, USA 1.pdf :: Unduh
|
| No. Panggil : | e20442688 |
| Entri tambahan-Nama orang : | |
| Subjek : | |
| Penerbitan : | Materials Park, Ohio: ASM International, 2003 |
| Sumber Pengatalogan: | LibUI eng rda |
| Tipe Konten: | text |
| Tipe Media: | computer |
| Tipe Pembawa: | online resource |
| Deskripsi Fisik: | xxviii, 1709 pages : illustration |
| Tautan: | http://portal.igpublish.com/iglibrary/search/ASMIB0000066.main.html?14 |
| Lembaga Pemilik: | |
| Lokasi: |
| No. Panggil | No. Barkod | Ketersediaan |
|---|---|---|
| e20442688 | TERSEDIA |
| Ulasan: |
| Tidak ada ulasan pada koleksi ini: 20442688 |
