Full Description
| Cataloguing Source | LibUI ind rda |
| Content Type | text (rdacontent) |
| Media Type | unmediated (rdamedia); computer (rdamedia) |
| Carrier Type | volume (rdacarrier); online resource (rdacarrier) |
| Physical Description | xiv, 53 pages : illustration ; 28 cm + appendix |
| Concise Text | |
| Holding Institution | Universitas Indonesia |
| Location | Perpustakaan UI, Lantai 3 |
- Availability
- Digital Files: 1
- Review
- Cover
- Abstract
| Call Number | Barcode Number | Availability |
|---|---|---|
| S69990 | 14-19-672029737 | TERSEDIA |
| No review available for this collection: 20459337 |
Abstract
Kecendrungan menuju miniaturisasi terus meningkat beberapa tahun belakangan ini, seperti komponen alat-alat elektronika atau peralatan medis. Seiring dengan itu, tekonologi micro forming dituntut untuk mampu memproduksi secara presisi, cepat dan masal. Micro blanking merupakan salah satu proses fabrikasi yang efisien dan rendah biaya dibanding proses lain dalam skala mikro. Namun, size effect mempengaruhi hasil shear surface pada produk blank.
Penelitian ini mengamati pengaruh kecepatan mulai 0.5 mm/s hingga 10 mm/s pada arah serat material sejajar dan tegak lurus menggunakan alumunium, tembaga, kuningan dan stainless steel SUS304. Hasil penelitian menunjukkan bahwa kecepatan punch yang semakin tinggi mampu memperbaiki kualitas shear surface.
The trend towards miniaturization has steadily increased in recent years, such as electronic rsquo s components or medical equipment. Micro forming technology needs to be able to make precise, rapid and massive production. Micro blanking is one of the most efficient and low cost process compared to other micro scale processes. However, the size effect affects the shear surface quality on the blanked product. This study observed the influence of the punch velocity from 0.5mm s to 10mm s in the parallel dan perpendicular rolling direction using aluminum, copper, brass and stainless steel SUS304. The results showed that higher punch velocity was able to improve the blank quality.
The trend towards miniaturization has steadily increased in recent years, such as electronic rsquo s components or medical equipment. Micro forming technology needs to be able to make precise, rapid and massive production. Micro blanking is one of the most efficient and low cost process compared to other micro scale processes. However, the size effect affects the shear surface quality on the blanked product. This study observed the influence of the punch velocity from 0.5mm s to 10mm s in the parallel dan perpendicular rolling direction using aluminum, copper, brass and stainless steel SUS304. The results showed that higher punch velocity was able to improve the blank quality.