Pendahuluan: Berbagai pilihan produk braket dan kawat ortodonti tersedia di pasaransehingga para ortodontis harus lebih cermat dalam melakukan seleksi terhadap produkbraket dan kawat yang digunakan. Ukuran tinggi slot braket dan dan diameter kawatortodonti yang tercantum pada label kemasan dapat berbeda dengan ukuran hasilpengukuran. Hal ini dapat mempengaruhi hasil pergerakan gigi yang terjadi selamaperawatan ortodonti. Tujuan dari penelitian ini adalah untuk mengetahui ukuran tinggislot braket dan diameter kawat sebenernya dari produk 3M/Unitek, Ormco, danDentaurum serta menganalisis perbedaannya dengan ukuran yang tertera pada kemasan.Metode: Sampel penelitian terdiri dari 30 braket gigi insisif atas slot 0.022 inci dan 45kawat ukuran 0,019 x 0,025 inci yang terdiri dari merk 3M/Unitek, Ormco, danDentaurum. Pengukuran tinggi slot braket dan diameter kawat ortodonti dilakukanmenggunakan Mikroskop Stereoskop Discovery V12 (Carl Zeiss Microimaging GmbH,Jerman) disertai perangkat komputer dan AxioCam.Hasil: Nilai rerata ukuran tinggi slot braket Ormco hasil pengukuran adalah 0,488 mm,3M/Unitek adalah 0,491 mm, Dentaurum adalah 0,538 mm. Nilai rerata ukurandiameter kawat Ormco berupa tinggi kawat hasil pengukuran adalah 0,413 mm danlebar kawat hasil pengukuran adalah 0,496 mm, nilai rerata ukuran diameter kawat3M/Unitek berupa tinggi kawat hasil pengukuran adalah 0,413 mm dan lebar kawathasil pengukuran adalah 0,500 mm, nilai rerata ukuran diameter kawat Dentaurumberupa tinggi kawat hasil pengukuran adalah 0,419 mm dan lebar kawat hasilpengukuran adalah 0,510 mm.Kesimpulan: Terdapat perbedaan bermakna rerata ukuran tinggi slot braket dandiameter berupa tinggi dan lebar kawat ortodonti produk 3M/Unitek, Ormco, danDentaurum pada hasil pengukuran dengan ukuran pada kemasan. Introduction: A wide selection of orthodontic brackets and wire products are available soorthodontists must be more careful in selecting the bracket and wire products used. Theheight of the bracket slot and the diameter of the orthodontic wire indicated on thepackaging label may differ from the result of the real measurement. This can affecttooth movement that occurs during orthodontic treatment. The purpose of this study wasto determine the size of the bracket slot height and wire diameter of the 3M/Unitek,Ormco, and Dentaurum products and to analyze the difference with the sizes listed onthe packaging.Method: The research sample consisted of 30 incisor brackets which have 0.559 mm(0.022 inch) slot and 45 wires which have 0,48 x 0,64 mm (0.019 x 0.025 inch)diameter consisting of the 3M/Unitek, Ormco, and Dentaurum brands. Themeasurement of the bracket slot height and the diameter of the orthodontic wire wascarried out using the Discovery V12 Stereoscopic Microscope (Carl ZeissMicroimaging GmbH, Germany) along with a computer and an AxioCam.Results: The mean value of the measured Ormco bracket slot height measurement is0.488 mm, 3M/Unitek is 0.491 mm, Dentaurum is 0.538 mm. The average value of theOrmco wire diameter in measured wire height is 0.413 mm and the measured wirewidth is 0.496 mm, the mean value of 3M/Unitek wire diameter in measured wire heightis 0.413 mm and the measured wire width is 0.500 mm, the mean value the diameter ofthe Dentaurum wire in measured wire height is 0.419 mm and the measured wire widthis 0.510 mm.Conclusions: There is a significant difference in the mean diameter size in the form ofheight and width of the orthodontic wire of 3M/Unitek, Ormco, and Dentaurumproducts measured by the size on the packaging. |