Effect of methane gas flow rate on adsorption capacity and temperature distribution of activated carbon
Nasruddin , Senoadi , M. Bayu Perdana, Ratiko (Faculty of Engineering, Universitas Indonesia, 2015)
|
| Adsorbed Natural Gas (ANG) is one of the gas storage methods which specialize in low pressure. This method is more competitive compared to Compressed Natural Gas (CNG). ANGis based on an adsorption process that involves adsorbate and adsorbent. This research is conducted to observe the effects of gas flow-rate on adsorption capacity and the temperaturedistribution of adsorbent. The adsorbent is a commercially activated carbon, and methane gas is the adsorbate. Methane flow rates are 1 standard liter per minute (SLPM) and 20 SLPM.Temperature in the pressure vessel is maintained at 25°C and the pressure at 3.5 MPa. The result shows that the adsorption capacity of activated carbon is higher at a lower gas flow rate. While a higher gas flow rate causes a higher temperature difference in the adsorption and in desorption process. |
| No. Panggil : | UI-IJTECH 6:4 (2015) |
| Entri utama-Nama orang : | |
| Subjek : | |
| Penerbitan : | Depok: Faculty of Engineering, Universitas Indonesia, 2015 |
| Sumber Pengatalogan : | LibUI eng rda |
| ISSN : | 20869614 |
| Majalah/Jurnal : | International Journal of Technology |
| Volume : | Vol. 6, No. 4, October 2015: Hal. 584-593 |
| Tipe Konten : | text |
| Tipe Media : | unmediated |
| Tipe Carrier : | volume |
| Akses Elektronik : | https://doi.org/10.14716/ijtech.v6i4.1019 |
| Institusi Pemilik : | Universitas Indonesia |
| Lokasi : | Perpustakaan UI, Lantai 4 R. Koleksi Jurnal |
| No. Panggil | No. Barkod | Ketersediaan |
|---|---|---|
| UI-IJTECH 6:4 (2015) | 08-23-09397089 | TERSEDIA |
| Ulasan: |
| Tidak ada ulasan pada koleksi ini: 9999920521634 |
