Reducing the vibrations of an unbalanced rotary engine by active force control
M. Hashemi (Faculty of Engineering, Universitas Indonesia, 2016)
|
In this article, the Active Force Control (AFC) method is implemented for reducing the vibrations that are caused by an unbalanced rotary engine. By using Matlab Simulink, the dynamic model of an unbalanced rotary engine was simulated. Then a Proportional–Integral–Derivative PID controller with the AFC loop was added. The obtained simulation results proved that when the PID controller was operating without the AFC loop, the vibrations were reduced but with very less efficiency when compared to the case in which the AFC loop was engaged with the PID controller. This means that the amplitude of vibrations was extremely reduced when the PID controller was equipped with the AFC loop, and the same results were observed for the frequency domain case. The robustness of the AFC method was also tested and again the method of AFC was very capable in reducing the vibrations. |
No. Panggil : | UI-IJTECH 7:1 (2016) |
Entri utama-Nama orang : | |
Subjek : | |
Penerbitan : | Depok: Faculty of Engineering, Universitas Indonesia, 2016 |
Sumber Pengatalogan : | LibUI eng rda |
ISSN : | 20869614 |
Majalah/Jurnal : | International Journal of Technology |
Volume : | Vol. 7, No. 1, January 2016: Hal. 141-148 |
Tipe Konten : | text |
Tipe Media : | unmediated |
Tipe Carrier : | volume |
Akses Elektronik : | https://doi.org/10.14716/ijtech.v7i1.1285 |
Institusi Pemilik : | Universitas Indonesia |
Lokasi : | Perpustakaan UI, Lantai 4 R. Koleksi Jurnal |
No. Panggil | No. Barkod | Ketersediaan |
---|---|---|
UI-IJTECH 7:1 (2016) | 08-23-44358880 | TERSEDIA |
Ulasan: |
Tidak ada ulasan pada koleksi ini: 9999920522153 |