Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 15981 dokumen yang sesuai dengan query
cover
New York, N.Y. : Pergamon Press, 1978
621.402 FAC
Buku Teks  Universitas Indonesia Library
cover
Saleh Ardiansyah
"Dengan meningkatnya kebutuhan energi listrik yang signifikan di Indonesia, diperlukan sumber energi lain untuk dapat mengganti peran bahan bakar fosil yang akan habis sebagai sumber energi listrik. Pembangkit Listrik Tenaga Sampah (PLTSa) yang menggunakan landfill gas (LFG) sebagai sumber energi dapat memberikan solusi dalam memenuhi kebutuhan listrik. Kekurangan LFG adalah karakteristik produksinya yang terus menurun dengan berjalannya waktu. Penelitian ini membahas model pembangunan PLTSa secara berkelanjutan dari sisi ekonomi. Ada dua model yang diajukan, model 1 melakukan penimbunan sampah selama satu periode saja (4 tahun) dan tidak ada lagi pembukaan lahan dan penimbunan sampah, sedangkan model 2 melakukan penimbunan sampah setiap empat tahun sekali dimana dilakukan lagi pembukaan lahan. Parameter yang digunakan dalam studi kelayakan ini adalah Benefit-Cost ratio dan Net Present Value. Berdasarkan hasil analisis, model yang layak secara ekonomi adalah model 2 dengan B/C Ratio 1.16 dan NPV Rp.9,015,502,964, dimana pengolahan sampah dilakukan secara berkelanjutan, sedangkan model 1 dengan B/C Ratio 0.91 dan NPV Rp.3,848,278,544, belum layak secara ekonomi dan belum menguntungkan
With the increasing demand of electrical energy in indonesia, another source of energy required to be able to replace the roles of fossil fuels as the main source of electrical energy. Waste power plant with landfill gas (LFG) as a source of energy can provide solutions in fulfilling the need for electricity. The disadvantages of LFG is the characteristic of gas production continues to decline over time. This research discusses the development model of sustainable waste power plant from economic view. This research propose two models, model 1 conducting the landfilling in one periode (4 years) only. Model 2 conducting the landfilling every 4 years by opening more area. The parameters used in this feasibility study are benefit-cost ratio and net present value. As the results, the model that economically feasible is model 2 with B/C Ratio 1.16 and NPV Rp.9,015,502,964, while the model 1 with B/C Ratio 0.91 and NPV Rp.3,848,278,544, is not economically feasible."
Depok: Fakultas Teknik Universitas Indonesia, 2014
S58690
UI - Skripsi Membership  Universitas Indonesia Library
cover
Alif Nuzulul Hidayat
"PLTP memiliki potensi berupa limbah panas yang masih terkandung dalam kondensat atau brine yang biasanya diinjeksikan kembali ke dalam bumi melalui sumur reinjeksi. Dalam penelitian ini dilakukan analisis tekno-ekonomi terhadap pemanfaatan potensi limbah panas PLTP Kamojang untuk proses penyulingan minyak akar wangi yang terletak di Kabupaten Garut. Berdasarkan hasil penelitian diketahui bahwa secara teknis kondensat PLTP Kamojang dapat dimanfaatkan untuk penyulingan akar wangi. Namun, akan lebih efektif apabila dapat ditemukan sumur yang mengandung brine. Total biaya kapital dan operasional yang dibutuhkan untuk skema brine secara berturut-turut adalah Rp42.727.999.500 dan Rp549.801.000, sedangkan untuk skema kondensat adalah Rp28.382.845.500 dan Rp420.174.000.
Secara ekonomi, penggunaan kondensat tidak layak untuk penyulingan minyak akar wangi. Skema pemanfaatan limbah panas bumi untuk penyulingan minyak akar wangi yang paling menguntungkan adalah menggunakan brine pada jarak maksimal 1 km dari sumber panas serta didanai 70% dari hibah dan 30% dari pemerintah dengan NPV Rp 1.057.899.500, IRR 10,16% dan PBP pada tahun ke-8. Emisi gas CO2 yang dapat dihindari dari penggunaan brine untuk proses penyulingan minyak akar wangi adalah sebanyak 213,5 ton CO2/tahun.

Geothermal power plant potential in the form of waste heat which is still contained in the condensate or brine is usually injected back into the earth through reinjection wells. In this research, techno-economic analysis of waste heat utilization from geothermal power flant for vetiver oil production located in Garut is conducted. The result of this research revealed that condensate of Kamojang geothermal power plant technically can be used to supply heat for vetiver oil production. However, it would be more effective if wells that contain brine can be found. Total of capital and operating costs required for the brine scheme are Rp42.727.999.500 and Rp549.801.000, while the condensate scheme are Rp28.382.845.500 and Rp420.174.000, respectively.
Economically, the use of condensate is not feasible for the vetiver oil production. The most profitable scheme of geothermal waste heat utilization for vetiver oil production is to use brine at a maximum distance of 1 km from the source of heat and funded 70% of grant & 30% of government with NPV Rp1.057.899.500, IRR 10,16% and PBP on the 8th year. CO2 Emissions can be avoided from the use of brine for vetiver oil production is as much as 213,5 tonnes of CO2/year.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S63994
UI - Skripsi Membership  Universitas Indonesia Library
cover
Mohammad Usman
"ABSTRACT
Pemanfaatan limbah panas adalah salah satu cara untuk mengurangi penggunaan bahan bakar fosil, salah satunya adalah dengan menggunakan generator termoelektrik untuk mengubah limbah panas menjadi energi listrik. Thermoelectric Generator TEGs adalah modul yang dapat mengubah panas menjadi daya listrik secara langsung, menggunakan efek Seebeck dan efek Peltier sebagai prinsip kerjanya, sehingga dapat meningkatkan efisiensi konsumsi energi dengan memanfaatkan panas limbah dari instrumen yang menghasilkan limbah panas. Fokus dari penelitian ini adalah untuk menemukan tegangan output modul TEG dengan memanfaatkan perbedaan suhu pada sisi dingin dan sisi panas TEG. Sisi panas dari modul akan diberi panas dari pemanas sebagai simulasi panas dari air panas, dan digunakan heat pipe untuk menghilangkan panas pada sisi dingin TEG. Tegangan output yang dihasilkan dengan menggunakan 4 modul TEG yang disusun secara Seri Termal - Seri Listrik dan menggunakan 2 heat pipe adalah 2,1 Volt.

ABSTRACT
Waste heat recovery is one way to reduce the use of fossil fuels, one of them is by using thermoelectric generator to convert waste heat into Thermoelectric Generator TEGs is a module that can convert heat into electrical power directly, using Seebeck effect and Peltier effect as its working principle, so it can increase efficiency of energy consumption by utilizing waste heat from an instrument that generate waste heat. The focus of this research is to find the output voltage of TEG by utilizing the temperature difference on the cold side and the heat side of the TEGs. The heat side of the module will be given heat from the heater as a simulation of the heat from hot water, and on the cold side heat pipes will be used to remove the heat on the cold side of TEGs. The result, output voltage that generated by using 4 module TEGs that arranged to thermal series electrical series and using 2 heat pipes is 2,1 Volt."
2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Marecki, J.
London: Peter Peregrinus, 1988
697.54 MAR c
Buku Teks SO  Universitas Indonesia Library
cover
Mahpudi Baisir
"Langkah konservasi energi penelitian ini mengupayakan peningkatan efisiensi pada teknik co-firing yang sudah umum dilakukan di Indonesia melalui sistem pengering biomassa. Percobaan dilakukan melalui pengujian salah satu pembangkit PLTU di area Jawa Barat dengan daya terpasang 3 x 350 MW yang sudah menerapkan co-firing sejak tahun 2021. Sistem pengering dipilih menggunakan jenis Rotary Drum Dryer dengan media pemanas berupa limbah panas gas buang exit boiler yang diambil setelah IDF #1 dengan tekanan ± 20 pa dan temperature 150 oC. Tekanan keluaran IDF #1 sangat rendah membutuhkan energi tambahan besar centrifugal fan dalam menyalurkan flue gas melalui pipa sepanjang ± 500 m sampai menuju lokasi dryer di area coal yard, dekat penyimpanan biomassa dan conveyor batu bara penyuplai bahan bakar ke sistem pembangkit. Biomassa disupplai dari pengusaha lokal sekitar lokasi pembangkit antara lain terdiri dari 90% sawdust dan 10% sekam padi. Memiliki kandungan rata-rata moisture campuran ( 44,57% dan rata-rata calorific value campuran ( 2.673,72 Kcal/Kg. Kapasitas pengering disesuaikan dengan kemampuan supplai biomassa sebesar 200 t/day. Pengujian dilakukan menggunakan simulasi pengering rotary dryer pada Aspen Plus dengan memvariasikan flow inlet biomass 8, 9 dan 10 t/h, flue gas flow 70, 80 dan 90 t/h serta residence time 15, 20 dan 25 menit. Moisture produk dry biomass terendah diperoleh 6,54% pada pengujian flow inlet biomass 8 t/h, flue gas flow 90 t/h dan residence time 25 menit. Hasil simulasi Aspen kemudian dibandingkan pada 5 kriteria penilaian kelayakan investasi yaitu NPV, IRR, Payback Period (PBP), Benefit and Cost (B/C) Ratio dan ROI. Hasilnya walaupun moisture produk dry biomass diperoleh lebih besar 10,9%, namun nilai NPV, IRR dan PBP, masing-masing sebesar Rp. 116.445.284.041,63, 150,32% dan 0,67 tahun, diperoleh sebagai yang terbaik pada pengujian flow inlet biomass 10 t/h, flue gas flow 90 t/h dan residence time 25 menit. Hal ini karena flow rate produk dry biomass lebih besar sehingga mampu membangkitkan selisih energy output yang lebih besar pula pada generator pembangkit. Sedangkan hasil terbaik B/C Ratio dan ROI, masing-masing sebesar 4,14 dan 314,12%, didapatkan saat pengujian flow inlet biomass 10 t/h, flue gas flow 80 t/h dan residence time 25 menit, hal ini karena energi tambahan untuk mendorong flue gas lebih kecil sehingga mempengaruhi B/C Ratio dan ROI. Penurunan energy output dan operational duration harus sedapat mungkin dihindari karena dampaknya sangat significant dalam menurunkan nilai 5 kriteria penilaian investasi. Validasi desain sistem pengering pada Aspen juga dilakukan untuk mengetahui akurasi.

This energy-conservation research aims to improve the efficiency of the cofiring process, which is widely utilized in Indonesia, using a biomass drying system. The experiment was conducted on a steam-coal power station in the West Java area with an installed power of 3 x 350 MW, which has been using cofiring since 2021. The drying method was selected utilizing a Rotary Drum Dryer type with a heating medium from waste heat of exhaust boiler flue gas obtained after IDF # 1, with pressure ± 20 pa and temperature 150 oC. The output pressure of IDF #1 is very low, requiring large additional energy from the centrifugal fan to flow the flue gas through a pipe measuring ± 500 m long to the dryer location in the coal yard area, near the biomass storage and coal conveyor that supplies fuel to the boiler system. Biomass is supplied from local suppliers around power plant location, consisting of 90% sawdust and 10% rice husks. It has an average mixed moisture content  44.57% and an average mixed calorific value  2,673.72 Kcal/Kg. The dryer capacity is adjusted to the biomass supply capability of 200 t/day. Experiments were carried out using a rotary dryer simulation on Aspen Plus by varying biomass inlet flow of 8, 9 and 10 t/h, flue gas flow of 70, 80 and 90 t/h and residence time of 15, 20 and 25 minutes. The lowest dry   biomass product moisture was obtained at 6.54% in the biomass inlet flow test of 8 t/h, flue gas flow of 90 t/h and residence time of 25 minutes. The results from Aspen simulation then compared with 5 investment assessment criteria: NPV, IRR, Payback Period (PBP), Benefit and Cost (B/C) Ratio and ROI. Even though the moisture content of the dry   biomass product was 10.9%, which was higher than the smallest value, the biomass inlet flow test yielded the best NPV, IRR, and PBP values, including Rp. 116,445,284,041.63 for NPV, 150.32% for IRR, and 0.67 years for PBP, with a biomass inlet flow test of 10 t/h, a flue gas flow of 90 t/h, and a residence time of 25 minutes. This is because the flow rate of the dry   biomass product is greater, so it can generate a larger energy output in the power plant generator. Meanwhile, the best B/C Ratio and ROI findings, including 4.14 and 314.12%, were obtained by testing the biomass inlet flow of 10 t/h, flue gas flow of 80 t/h, and residence period of 25 minutes, this is because the additional energy to push the flue gas is smaller, thus affecting the B/C Ratio and ROI. Decreasing energy output and operational duration must be avoided wherever possible because the impact is very significant in reducing the value of the 5 investment assessment criteria. Validation of the drying system design for Aspen was also carried out to determine accuracy."
Jakarta: Fakultas Teknik Universitas Indonesia, 2024
TA-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Marpaung, Wasinton Haratua
"ABSTRAK
Studi keekonomian Marine CNG (Compressed Natural Gas) dengan membeli kapal Votrans dan menyewa kapal Coselle dilakukan pada tiga pembangkit yang direncanakan dibangun di Maluku. Metoda yang digunakan adalah Hub and Spoke dan Milk and Run. Keekonomian suplai CNG dibandingkan terhadap HSD (High Speed Diesel). Analisis keekonomian dilakukan dengan menghitung Net Present Value (NPV), Internal Rate of Return (IRR) dan Payback Period (PBP). Evaluasi keekonomian menunjukkan bahwa metoda Hub and Spoke dengan kapal Coselle tidak layak untuk digunakan. Metoda Hub and Spoke kapal Votrans, dan metoda Milk and Run baik Votrans maupun Coselle memberikan evaluasi keeokonomian yang layak. Rentang ideal untuk tariff gas adalah antara USD 2,5-6,5/MMBtu dibandingkan harga HSD USD 16,83/MMbtu. Metoda terbaik adalah dengan metoda Milk and Run Votrans 8 kapal yaitu NPV USD 493 M, dan Milk and Run 10 kapal dengan PBP 2,06 tahun dan IRR 41 %.

ABSTRACT
Economical study of Marine CNG with buying Votrans vessel and renting Coselle vessel is applied at the future three power plants in the Maluku. The methods are Hub and Spoke and Milk and Run. Economical CNG supply is compared to the HSD (High Speed Diesel). The economic analysis is done by calculating the Net Present Value (NPV), Internal Rate of Return (IRR), and payback period (PBP). The economic evaluation shows that the Hub and Spoke method with renting Coselle ship cannot be applied. The Hub and Spoke method with buying Votrans, and Milk and Run methods with buying or renting ship gives a positive economic evaluation. The ideal gas tariff is between USD 2,5-6,5/MMbtu compared to HSD price USD 16,83/MMbtu. The best method is Milk and Run Votrans with 8 vessels with NPV USD 493 M, and Milk and Run Coselle with 10 vessel with PBP 2,06 years and IRR 59%.
"
Jakarta: Fakultas Teknik Universitas Indonesia, 2014
T43347
UI - Tesis Membership  Universitas Indonesia Library
cover
Reynard Henderson
"Transisi energi berkelanjutan merupakan salah satu isu prioritas pada Presidensi G20 Indonesia. Sebagai upaya untuk mempercepat transisi energi berkelanjutan, pemerintah Indonesia menargetkan bauran energi dari energi baru terbarukan sebesar 23% pada tahun 2025, yang didominasi oleh Pembangkit Listrik Tenaga Surya (PLTS). Selain itu, penerapan sistem PLTS atap juga didukung oleh peningkatan nilai keekonomian melalui ditetapkannya Peraturan Menteri ESDM No. 26 tahun 2021. Dalam skripsi ini dilakukan studi mengenai penerapan sistem PLTS atap pada Gedung Produksi II PT. ON untuk mengetahui potensi produksi energi, potensi penghematan energi yang berasal dari grid, potensi ekspor energi kepada grid, serta besar kapasitas optimal bagi sistem tersebut. Studi pada skripsi ini dilaksanakan dengan menggunakan simulasi berbasis perangkat lunak PVSyst melalui metode trial-and-error. Hasil studi menunjukkan bahwa rancangan sistem PLTS atap Gedung Produksi II PT. ON dengan kapasitas sistem maksimal dapat memproduksi energi sebesar 266955 kWh per tahun. Nilai tersebut setara dengan 115% dari konsumsi energi tahunan PT. ON. Berdasarkan kelebihan produksi energi per tahun sebesar 15% tersebut, dapat diketahui bahwa kapasitas optimal bagi sistem PLTS atap Gedung Produksi II PT. ON adalah sebesar 171 kWp. Melalui kapasitas sistem optimal tersebut, maka seluruh produksi energi dari sistem PLTS atap dapat dimanfaatkan oleh PT. ON.

The sustainable energy transition is one of the priority issues in Indonesia's G20 Presidency. As an effort to accelerate the transition to sustainable energy, the Indonesian government is targeting an energy mix from new renewable energy of 23% by 2025, which is dominated by solar power plants. Besides that, implementations of rooftop solar power plant are also reinforced in the economic values through the stipulation of Minister of Energy and Mineral Resources Regulation No. 26 of 2021. In this thesis, a study regarding the application of rooftop solar power plant at PT. ON Production Building II was conducted to find out about the potential for energy production, the potential for saving energy from the grid, the potential for exporting energy to the grid, and the optimal system capacity. The study in this thesis was performed using simulations based on PVSyst software through a trial-and-error method. The results of the study show that the design of the rooftop solar power plant at PT. ON Production Building II can produce energy of 266955 kWh per year. That value is equivalent to 115% of the amount energy consumed yearly by PT. ON. Based on the excess yearly energy production of 15%, the obtained optimal system capacity for the rooftop solar power plant in PT. ON Production Building II is 171 kWp. Through this optimal system capacity, the entire amount of energy produced by the rooftop solar power plant can be fully utilized by PT. ON."
Depok: Fakultas Teknik Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Erlangga Falaq Ajipakerti
"Indonesia saat ini berupaya mengembangkan sektor energi terbarukan untuk memenuhi kebutuhan energi nasional yang selama ini didominasi oleh energi fosil. Indonesia memiliki potensi energi gelombang laut yang tinggi khususnya di Jawa Timur yang dapat diekstraksi dan diubah menjadi energi listrik dengan teknologi wave dragon yang merupakan salah satu teknologi pembangkit listrik tenaga gelombang laut tercanggih. Lokasi yang ditentukan paling ideal untuk implementasi di Jawa Timur adalah pada koordinat 112.225 x -8.388. Analisis risiko menunjukkan bahwa untuk tingkat kepercayaan 95% interval kepercayaan untuk NPV adalah antara $4.850.212 dan $4.416.399, PBP antara 4,3 dan 4,09 tahun, dan IRR antara 22,16% dan 23,53%. Untuk strategi yang tersedia, opsi expand paling baik dilaksanakan pada tahun ke-20, opsi contract dapat dieksekusi segera setelah tahun ke-11, opsi abandon dapat dieksekusi paling awal pada tahun 11.2, dan opsi open dapat dilaksanakan pada tahun ke-1 hingga 19.9.

Indonesia is currently trying to develop the renewable energy sector to supply the national energy demand that has been dominated by fossil energies for years. Indonesia has a high potential of ocean wave energy especially in East Java that can be extracted and converted into electrical energy with wave dragon technology which is one of the most advance ocean waves powered power plant technology. The location that is determined to be the most ideal for the implementation in east java is at the coordinates of 112.225 x -8.388. The risk analysis shows that for the 95% confidence level the confidence interval for NPV is between of $4,850,212 and $4,416,399, the PBP is between 4.3 and 4.09 years, and IRR between 22.16% and 23.53%. For the available strategies the expand option is best to execute at year 20, the contract option can be executed as soon as year 11, the abandon option can be executed earliest at year 11.2, and the open option can be implemented at year 1 until 19.9.
"
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Irfan
"Penyumbang emisi terbesar di Indonesia adalah sektor ketenagalistrikan, secara khusus pembangkit listrik tenaga batu bara. Indonesia dikenal sebagai salah satu produsen dan eksportir batubara terbesar di dunia, namun Indonesia memiliki target untuk menerapkan Net Zero Emission pada tahun 2060. Oleh karena itu, perlunya proses transisi energi dari bahan bakar fosil ke bahan bakar yang ramah lingkungan (rendah karbon) harus dilakukan. Salah satu terobosan dari transisi energi tersebut adalah dengan penerapan Carbon Capture and Storage (CCS) pada PLTU Batubara. Tujuan dari penelitian ini adalah untuk  melakukan analisis seberapa besar energi penalti yang dihasilkan jika CCS diterapkan pada PLTU yang sudah beroperasi, khususnya PLTU kelas 660 MW dengan fasilitas flue gas desulphurization (FGD).
Penelitian ini merancang simulasi sistem CCS PLTU dengan Aspen HYSYS V12 dan efisiensi penangakapan CO2 sebesar 90%. Proses penangkapan CO2 pada absorber menggunakan solvent berbasis amine dengan komposisi 40% MDEA dan 10% Piperazine. Emisi gas buang PLTU dikondisikan suhunya menjadi 40°C dan tekanan 1,2 bar sebelum masuk ke absorber. Komposisi gas buang CO2 memiliki kandungan 15,06% fraksi mol dan intensitas 0,936 ton CO2/MWh. Proses pemisahan rich solvent CO2 di dalam regenerator dibantu oleh steam reboiler dari ekstraksi jalur steam crossover turbin intermediate pressure (IP) dan low pressure (LP) yang memiliki tekanan 3 bar dan temperatur 242,7°C. Berdasarkan hasil simulasi didapatkan persentase penangkapan CO2 sebesar 90,24% dengan komposisi mol CO2 di keluaran absorber (sweet gas) menjadi 1,46% dan intensitasnya menjadi 0,10 ton CO2/MWh. Selain itu diketahui bahwa dengan meningkatnya laju aliran solvent dan komposisi MDEA dan Piperazine maka akan semakin naik efisiensi penangkapan CO2. Akibat adanya penambahan peralatan CCS dan modifikasi sistem steam cycle turbin PLTU akan menghasilkan energi penalti sebesar 30,11%.

The largest contributor of emissions in Indonesia is the power sector, specifically coal fired power plants.  Indonesia is well-known as one of the biggest producer and exporter of coal in the world, meanwhile Indonesia has a target to implement Net Zero Emission in 2060. Hence the need for an energy transition from fossil fuels to environmentally friendly fuels (low carbon) must be done. One of the breakthroughs of energy transition is the implementation of Carbon Capture and Storage (CCS) in coal fired power plants (CFPP). The purpose of this study is to analyze the magnitude of energy penalty if CCS is applied to the existing CFPP, especially CFPP of the class of 660 MW with flue gas desulphurization (FGD) facility.
The objective of this study is to design a CCS system for a CFPP using Aspen HYSYS V12 with an efficiency of CO2 capture of 90%. The CO2 capture process in the absorber uses an amine-based solvent with a composition of 40% MDEA and 10% Piperazine. CFPP flue gas emissions are conditioned to reach a temperature of 40°C and a pressure of 1.2 bar before entering the absorber. The flue gas composition has a CO2 content of 15.06% mole fraction and an intensity of 0.936 tons of CO2/MWh. The process of separating rich solvent CO2 in the regenerator is assisted by a steam reboiler from the extraction of crossover steam intermediate pressure (IP) and low pressure (LP) turbines which has a pressure of 3 bar and a temperature of 242.70 C. Based on the simulation results, the percentage of CO2 capture is 90.24% with the mole composition of CO2 in the absorber output (sweet gas) is 1.46% and the intensity of CO2 is 0.10 tons CO2/MWh. In addition, it is known that with the increasing solvent flow rate and composition of MDEA and Piperazine, the CO2 capture efficiency  increases. As a result of the addition of CCS equipment and modification of the steam cycle system of the CFPP turbine generates an energy penalty of 30.11%
"
Jakarta: Fakultas Teknik Universitas Indonesia, 2024
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>