Hasil Pencarian  ::  Simpan CSV :: Kembali

"ABSTRAKSintesis ester asam lemak karbohidrat pada penelitian ini dilakukan melalui reaksi esterifikasi enzimatik antara asam lemak hasil hidrolisis minyak kelapa sawit dan maltosa menggunakan lipase Candida rugosa dalam keadaan bebas maupun terimobilisasi pada nanopartikel Fe3O4-kitosan. Nanopartikel Fe3O4-kitosan disintesis dengan metode kopresipitasi. Hasil uji persen loading pada penggunaan lipase terimobilisasi pada konsentrasi 200 ppm memberikan % loading sebesar 31,28 % dengan aktivitas hidrolisis besar 7,083 U/mL, aktivitas spesifik 2,024 U/mg protein, serta efisiensi imobilisasi sebesar 4,49 %. Sedangkan pada konsentrasi lipase terimobilisasi 350 ppm diperoleh nilai persen loading 64,45 % dengan aktivitas hidrolisis 4,583 U/mL, aktivitas spesifik 1,31 U/mg protein, serta efisiensi imobilisasi sebesar 2,90 %. Hasil optimasi esterifikasi pada konsentrasi lipase terimobilisasi 200 ppm dengan berbagai perbandingan rasio substrat (maltosa : asam lemak) diperoleh persen konversi tertinggi ada pada rasio substrat 1 : 90 dengan pelarut t-butanol sebesar 3,33 %, sedangkan pada konsentrasi 350 ppm diperoleh % konversi tertinggi ada pada rasio 1 : 60 dengan pelarut t-butanol sebesar 3,33 %.

---

ABSTRACTIn this study, synthesis of fatty acid carbohydrate esters could be done by the enzymatic esterification between the palm oil fatty acid and maltose using free and immobilized Candida rugosa lipase on Fe3O4-chitosan nanoparticles. Fe3O4-chitosan nanoparticles were synthesized using coprecipitation method. The loading percentage test results on the use of immobilized lipase at a concentration of 200 ppm gave loading percentage obtained was 31.28 % by using the initial enzyme concentration 200 ppm for immobilization, with hydrolytic activity of 7,083 U / mL, specific activity of 2,024 U/mg of protein, and the immobilization efficiency of 4.49%. Meanwhile, the loading percentage obtained when using 350 ppm lipase was 64.45 %, with the hydrolytic activity of 4,583 U/mL, specific activity of 1.31 U/mg protein, and the immobilization efficiency of 2.90 %. The highest conversion percentage in esetrification reaction obtained in this study was 3.33 % using initial lipase concentration of 200 ppm, the ratio of substrate 1 : 90, and t-Buthanol as solvent. Meanwhile, by using initial lipase concentration of 350 ppm, the conversion obtained was 3.33 %, with the substrate ratio 1 : 60, also in t-Buthanol as solvent."

"Ester asam lemak-karbohidrat dapat dibuat dari reaksi esterifikasi antara sukrosa dengan asam lemak minyak sawit. Reaksi esterifikasi dilakukan secara enzimatis menggunakan lipase Candida rugosa bebas maupun terimobilisasi pada nanopartikel Fe3O4?Kitosan. Hasil sintesis nanopartikel Fe3O4?Kitosan dikarakterisasi dengan FTIR (Fourier Transform Infra Red). Selanjutnya, lipase diimobilisasi dan diuji persen loading serta aktivitas katalitiknya. Didapatkan persen loading imobilisasi sebesar 31,46%, aktivitas hidrolisis 7,08 U/mL, dan aktivitas spesifik 2,02 U/mg, dengan efisiensi imobilisasi sebesar 4,49%, dan penurunan aktivitas sebesar 95,32%. Pada reaksi esterifikasi menggunakan enzim terimobilisasi dalam pelarut n-heksana dan t-butanol, didapatkan persen konversi ester tertinggi pada rasio sukrosa : asam lemak 1:90 dengan persen konversi masing-masing sebesar 1,23% dan 4,08%.

---

Carbohydrate-fatty acid ester can be synthesized by esterification reaction between sucrose and palm oil fatty acid. The esterification reaction was carried out enzymatically using free and immobilized Candida rugosa lipase on Fe3O4?Chitosan nanoparticles. The synthesized Fe3O4?Chitosan nanoparticles were characterized by FTIR (Fourier Transform Infra Red). The lipase was immobilized and then the loading percentage and the catalytic activity were determined. The loading percentage of the immobilized enzyme was 31.46% with hydrolytic activity of 7,08 U/mL, the specific activity of 2,02 U/mg, the immobilization efficiency was 4.49%, and the enzyme activity was decreased by 95.32%. In the esterification reaction using immobilized enzyme in n-hexane and t-butanol, the highest ester conversion percentage were obtained by using the ratio of sucrose : fatty acid 1:90 with the conversion percentage of 1,23% and 4,08% respectively."

"Ester asam lemak glukosa dapat diperoleh melalui reaksi esterifikasi antara glukosa dengan asam lemak hasil hidrolisis minyak sawit. Pada penelitian ini, reaksi esterifikasi dilakukan secara enzimatik menggunakan katalis lipase Candida rugosa E.C.3.1.1.3 yang terimobilisasi pada nanopartikel Fe3O4-kitosan. Nanopartikel Fe3O4-kitosan disintesis menggunakan metode kopresipitasi antara Fe3+ dan Fe2+, kemudian dikarakterisasi menggunakan FTIR (Fourier Transform Infra Red) dan FESEM (Field Emission Scanning Electron Microscopy). Proses imobilisasi lipase pada nanopartikel Fe3O4-kitosan menggunakan metode ikat silang dengan glutaraldehida sebagai agen pengikat silang. Hasil imobilisasi lipase dianalisis menggunakan FESEM. Analisis dengan FESEM menunjukkan bahwa ukuran rata-rata partikel Fe3O4-kitosan yang dihasilkan berkisar 35 nm. Persen loading imobilisasi lipase yang diperoleh adalah 84,80%. Aktivitas hidrolisis lipase terimobilisasi sebesar 5,61 U/mg dengan aktivitas spesifik 0,374 U/mg, serta efisiensi imobilisasi sebesar 14,22%. Dari hasil reaksi esterifikasi diperoleh persen konversi asam lemak sebesar 2,92; 3,33; 3,75; 5,83; dan 8,75 pada penggunaan enzim terimobilisasi berurutan sebesar 5, 10, 20, 30, dan 40% massa substrat.

---

Glucose fatty acid esters could be produced by esterification reaction between palm oil fatty acid and glucose. In this study, esterification reactions were carried out enzymatically using immobilized Candida rugosa lipase E.C. 3.1.1.3 on Fe3O4-chitosan nanoparticles. Fe3O4-chitosan nanoparticles were synthesized by co-precipitation method between Fe3+ and Fe2+ and then characterized using FTIR (Fourier Transform Infra Red) and FESEM (Field Emission Scanning Electron Microscopy). The process of lipase immobilization on Fe3O4-chitosan nanoparticles was using crosslinking method with glutaraldehyde as crosslinking agent. The immobilization lipase obtained was analyzed by FESEM. FESEM analysis showed that the average particle size of Fe3O4-chitosan nanoparticles produced was around 35 nm. Loading percentage of immobilized lipase was 84,80%. Hydrolysis activity of immobilized lipase was 5,61 U/mg with specific activity 0,374 U/mg and efficiency immobilization was 14,22%. The percentage of fatty acid conversions obtained from this study were 2,92; 3,33; 3,75; 5,83; 8,75 by using immobilized lipase each around 5, 10, 20, 30, 40% of substrate mass."

"Reaksi esterifikasi antara glukosa dengan asam lemak dapat menghasilkan ester asam lemak-glukosa. Pada penelitian ini, asam lemak diperoleh dari reaksi hidrolisis minyak kelapa sawit yang dijual dipasaran. Reaksi esterifikasi dilakukan secara enzimatik menggunakan katalis lipase Candida rugosa E.C.3.1.1.3 terimobilisasi pada nanopartikel Fe3O4-Kitosan. Nanopartikel Fe3O4- Kitosan disintesis dengan metode kopresipitasi kemudian dilakukan karakterisasi dengan FTIR (Fourier Transform Infra Red), XRD (X-Ray Diffraction), dan EDS (Energy Dispersive X-Ray Spectroscopy). Imobilisasi lipase Candida rugosa pada nanopartikel Fe3O4-Kitosan menggunakan metode ikat silang dengan glutaraldehida sebagai agen pengikat silang. Hasil imobilisasi dilakukan uji aktivitas dan persen loading. Persen loading imobilisasi lipase yang diperleh adalah 62,20% dan aktivitas hidrolisis lipase terimobilisasi sebesar 6,18 U/mL dan aktivitas spesifiknya sebesar 2,65 U/mg serta efisiensi imobilisasi sebesar 34,54%. Dari hasil optimasi esterifikasi diperoleh persen konversi optimum sebesar 3,70 % dengan kondisi reaksi pada suhu 35°C , ratio glukosa : asam lemak 1 : 90, dan waktu reaksi selama 16 jam dan 40% massa enzim terimobilisasi.

---

Esterification reaction between glucose and fatty acid could produce glucose-fatty acid esters. In this study, fatty acid was synthesized from hydrolysis reaction of palm oil. Esterification reaction was carried out enzymatically using immobilized Candida rugosa lipase EC.3.1.1.3 on Fe3O4-chitosan nanoparticles. Fe3O4-chitosan nanoparticles was synthesized using co-precipitation method and was characterized using FTIR (Fourier Transform Infra Red), XRD (X-Ray Diffraction), and EDS (Energy Dispersive X-Ray Spectroscopy). Candida rugosa lipase was immobilized on Fe3O4-chitosan nanoparticles using cross-linking method with glutaraldehyde as cross linker. Loading percentage of immobilized lipase was 62,20%. Hydrolysis activity of immobilized lipase was 6,81 U/mL, the specific activity was 2,65 U/mg and the immobilization efficiency was 34,54%. From this optimization study of esterification, the highest fatty acid conversion percentage was obtained using 1 : 90 ratio of glucose : fatty acid, 16 hours reaction time, immobilized lipase 40% of substrate’s mass, and at temperature 35°C. The highest fatty acid conversion percentage was 3,70%."

"[SFAEs (Sugar Fatty Acid Esters) atau ester asam lemak-gula dapat disintesis enzimatis menggunakan lipase Candida rugosa E.C.3.1.1.3 terimobilisasi pada nanopartikel Fe3O4-Kitosan antara asam lemak hidrolisat minyak sawit dan fruktosa. Nanopartikel Fe3O4-Kitosan disintesis dengan metode kopresipitasi dan dikarakterisasi menggunakan FTIR (Fourier Transform Infra Red), FESEM (Field Emission Scanning Electron Microscopy), TEM (Transmission Electron Microscopy), dan VSM (Vibrating Sample Magnetometer). Esterifikasi dilakukan menggunakan lipase terimobilisasi untuk pemakaian pertama dan berulang. Nilai persen loading pada lipase terimobilisasi yang diperoleh adalah sebesar 68,15%. dengan aktivitas sebesar 1,39 U/mg dan efisiensi imobilisasi sebesar 3,52%. Untuk lipase terimobilisasi pemakaian kedua didapatkan aktivitas spesifik sebesar 0,51 U/mg dengan efisiensi imobilisasi sebesar 1,28%. Reaksi esterifikasi dilakukan dalam pelarut organik yang berbeda yaitu t-butanol dan metil isobutil keton (MIBK). Persen konversi tertinggi diperoleh dengan pelarut t-butanol sebesar 28,09% dengan derajat substitusi (DS) ester 3 menggunakan lipase bebas, 21,80% dengan DS ester 2 menggunakan lipase terimobilisasi dan 16,81% dengan DS ester 2 menggunakan lipase terimobilisasi pemakaian kedua.

---

Sugar Fatty Acid Esters (SFAEs) can be synthesized by an enzymatic esterification between palm oil fatty acid and fructose using immobilized Candida rugosa lipase E.C.3.1.1.3 on Fe3O4-Chitosan nanoparticles. Fe3O4-Chitosan nanoparticles were synthesized by using coprecipitation method and characterized using FTIR (Fourier Transform Infra Red), FESEM (Field Emission Scanning Electron Microscopy), TEM (Transmission Electron Microscopy), and VSM (Vibrating Sample Magnetometer). The esterification reaction was performed using immobilized lipase for first and second usage. The loading percentage value of immobilized lipase obtained in this study was 68.15% with the specific avtivity of the immobilized lipase and immobilization efficiency was 3.52%. For the second usage of immobilized lipase, the specific activity obtained was 0.51 U/mg and immobilization efficiency obtained was 1.28%. The solvents used in the esterification reaction are t-butanol and methyl isobutyl ketone (MIBK). The highest percentage conversion was obtained in t-butanol as a solvent using free lipase with the value of 28.09% and degree of substitution (DS) value of ester was 3. The conversion percentage using immobilized lipase was 21.80% and DS value of ester was 2. Last but not least, for the second usage of immo., Sugar Fatty Acid Esters (SFAEs) can be synthesized by an enzymatic esterification between palm oil fatty acid and fructose using immobilized Candida rugosa lipase E.C.3.1.1.3 on Fe3O4-Chitosan nanoparticles. Fe3O4-Chitosan nanoparticles were synthesized by using coprecipitation method and characterized using FTIR (Fourier Transform Infra Red), FESEM (Field Emission Scanning Electron Microscopy), TEM (Transmission Electron Microscopy), and VSM (Vibrating Sample Magnetometer). The esterification reaction was performed using immobilized lipase for first and second usage. The loading percentage value of immobilized lipase obtained in this study was 68.15% with the specific avtivity of the immobilized lipase and immobilization efficiency was 3.52%. For the second usage of immobilized lipase, the specific activity obtained was 0.51 U/mg and immobilization efficiency obtained was 1.28%. The solvents used in the esterification reaction are t-butanol and methyl isobutyl ketone (MIBK). The highest percentage conversion was obtained in t-butanol as a solvent using free lipase with the value of 28.09% and degree of substitution (DS) value of ester was 3. The conversion percentage using immobilized lipase was 21.80% and DS value of ester was 2. Last but not least, for the second usage of immo]"

"Reaksi enzimatik esterifikasi asam lemak minyak sawit dengan fruktosa dapat dilakukan menggunakan katalis lipase Candida rugosa E.C.3.1.1.3 yang diimobilisasi pada nanopartikel Fe3O4-kitosan. Imobilisasi enzim dilakukan dengan konsentrasi enzim yang berbeda yaitu 200 ppm dan 350 ppm. Selanjutnya ditentukan % loading, aktivitas hidrolisis, aktivitas spesifik, efisiensi imobilisasi, dan penurunan aktivitas. Pada penggunaan 200 ppm lipase diperoleh nilai % loading 31,46%, aktivitas hidrolisis 7,083 U/mL, aktivitas spesifik 1,27 U/mg, efisiensi imobilisasi 4,49%, dan penurunan aktivitas 95,32%. Sementara untuk penggunaan 350 ppm diperoleh diperoleh nilai % loading 64,45%, aktivitas hidrolisis 4,58 U/mL, aktivitas spesifik 1,31 U/mg, efisiensi imobilisasi 2,90%, dan penurunan aktivitas 97,10%. Persen konversi ester tertinggi sebesar 6,48% diperoleh dengan menggunakan pelarut t-butanol pada variasi molar 1:60 dan konsentrasi enzim yang digunakan untuk imobilisasi 200 ppm. Hasil karakterisasi ester asam lemak menggunakan FTIR menunjukkan adanya puncak yang khas dari ester. Uji emulsi sederhana menunjukkan bahwa ester yang terbentuk dapat berfungsi sebagai pengemulsi.

---

Enzymatic esterification reaction of palm oil fatty acids with fructose can be done using immobilized Candida rugosa lipase E.C.3.1.1.3 on Fe3O4-chitosan nanoparticles. Lipase immobilization was conducted using lipase concentrations of 200 ppm and 350 ppm. The immobillized lipase were analyzed to determined the % loading, hydrolysis activity, specific activity, the efficiency of immobilization, and decreased activity. When using 200 ppm lipase for immobilization obtained value of % loading 31,46%, hydrolysis activity of 7,083 U/mL, specific activity of 1,27 U/mg, immobilization efficiency of 4,49%, and 95,32% decrease in activity. While using of 350 ppm obtained values of % loading 64,45%, hydrolysis activity 4,58 U/mL, specific activity of 1,31 U/mg, immobilization efficiency 2,90%, and decrease activity 97,10%. The higher percent conversion of ester was 6,48% obtained by using t-butanol solvent at 1:60 of variation molar and the concentration of enzyme used for immobilization was 200 ppm. The results of the characterization of fatty acid esters using FTIR showed the typical peak of the ester. Simple emulsion test showed that the ester formed can serve as an emulsifier."

"Penelitian ini bertujuan untuk mempelajari pemakaian berulang lipase Candida rugosa E.C 3.1.1.3 yang terimobilisasi pada nanopartikel Fe3O4-kitosan pada reaksi esterifikasi asam lemak minyak kelapa sawit dengan sorbitol. Pemakaian dari enzim lipase Candida rugosa yang terimobilisasi pada nanopartikel Fe3O4-kitosan digunakan sebanyak lima kali pemakaian. Nilai persen loading pada lipase terimobilisasi yang diperoleh adalah sebesar 75%. Reaksi esterifikasi dilakukan pada pelarut t-butanol dan Metil Isobutil Keton (MIBK). Persen konversi reaksi esterfikasi menggunakan enzim bebas dalam pelarut MIBK adalah 24,20%, sedangkan dalam pelarut t-butanol belum diperoleh. Persen konversi yang diperoleh pada penggunaan enzim terimobilisasi dalam pelarut MIBK secara berturut-turut adalah 16,28%, 13,96%, 10,93%, 5,60%, dan 3,50%, sedangkan dalam pelarut t-butanol adalah 12,60%, 9,97%, 6,20%, 4,79%, dan 2,45%. Jumlah produk yang dihasilkan menggunakan enzim terimobilisasi lebih efektif dibandingkan menggunakan enzim bebas.

---

This research is going to study about repeating usage of Candida rugosa E.C 3.1.1.3 lipase immobilized to Fe3O4-chitosan nanoparticles as esterification reaction catalyst of palm oil fatty acid and sorbitol. Lipase Candida rugosa which is immobilized to Fe3O4-chitosan is used five times. The value of percent loading for lipase immobilized is 75%. Esterification reaction is in t-butyl alcohol and Methyl Isobutyl Ketone (MIBK) solvent. Percent convertion for esterification reaction using free enzyme in MIBK solvent is 24,20%, whereas in t-butyl alcohol solvent is not completely done. Percent convertion for esterification reaction using immobilized enzyme in MIBK solvent are 16,28%, 13,96%, 10,93%, 5,60%, dan 3,50%, whereas in t-butyl alcohol solvent are 12,60%, 9,97%, 6,20%, 4,79%, dan 2,45%. Amount of product is produced using immobilized enzyme is better than using free enzyme."

"Ester glukosa dapat disintesis secara enzimatik menggunakan lipase Candida rugosa. Pada penelitian ini digunakan lipase Candida rugosa EC 3.1.1.3 yang diimobilisasi pada nanopartikel magnetik Fe3O4. Nanopartikel Fe3O4 disintesis dengan metode kopresipitasi menggunakan NaOH sebagai agen pengendap. Lipase diimobilisasi pada kondisi pH 7,0 dan suhu 4 oC. Nanopartikel Fe3O4 yang disintesis dan hasil imobilisasi lipase Candida rugosa pada nanopartikel dikarakterisasi menggunakan Field Emission Scanning Electron Microscopy (FESEM). Lipase terimobilisasi ditentukan nilai persen loading, nilai aktivitas hidrolisis, dan nilai aktivitas spesifiknya. Reaksi esterifikasi menggunakan lipase Candida rugosa terimobilisasi pada nanopartikel Fe3O4 dilakukan pada suhu 4 oC selama 20 jam. Selanjutnya dilakukan uji emulsifier terhadap produk esterifikasi yang dihasilkan. Nilai persen loading lipase terimobilisasi pada nanopartikel magnetik Fe3O4 adalah sebesar 58,53%. Aktivitas hidrolitik lipase terimobilisasi adalah sebesar 7,13 U/mL dan aktivitas spesifik lipase terimobilisasi adalah sebesar 0,47 U/mg, sedangkan aktivitas spesifik lipase bebas adalah sebesar 2,58 U/mg. Terjadi penurunan aktivitas spesifik lipase sebesar 81,22%. Nilai persen konversi asam lemak yang didapat setelah reaksi esterifikasi adalah 3,33%. Analisis produk esterifikasi dengan FT-IR menunjukkan adanya puncak serapan gugus karbonil ester (C=O) pada bilangan gelombang 1740 cm-1. Hasil uji emulsi sederhana terhadap produk ester menunjukkan produk ester yang dihasilkan terbukti dapat bertindak sebagai emulsifier.

---

Ester glucose could be synthesized enzymatically using Candida rugosa lipase. In this study, Candida rugosa EC 3.1.1.3 lipase was immobilized on magnetic Fe3O4 nanoparticles. Magnetic Fe3O4 nanoparticles was synthesized using coprecipitation method. Fe3O4 nanoparticles which had been synthesized and the immobilized lipase were characterized using FESEM. The immobilized lipase was determined its loading percentage, hydrolytic activity, and specific activity. Esterification reaction using immobilized lipase was carried out at 4 OC for 20 hours. The loading percentage of immobilized lipase on magnetic Fe3O4 nanoparticles was 58.53%. The hydrolytic activity of the immobilized lipase was 7.13 U/mL with spesific activity of 0.47 U/mL. Thus the specific activity of the immobilized lipase was decreased up to 81.22%. The percentage of fatty acids conversion in esterification reaction was 3,33%. The characterization of synthesized product with FT-IR showed that product exhibit the absorption group at 1740 cm-1. The synthesized product was then examined by simple emulsion test and was proved to be an emulsifier."

"Pada penelitian ini, ester glukosa dan ester sorbitol asam lemak disintesis melalui reaksi enzimatik menggunakan katalis lipase Candida rugosa bebas dan lipase Candida rugosa yang diimobilisasi pada partikel nano Fe3O4-kitosan. Nilai persen loading imobilisasi yang diperoleh adalah 31,28 %. Aktivitas spesifik untuk reaksi hidrolisis lipase Candida rugosa bebas sebesar 45,12 U/mg, sedangkan untuk lipase terimobilisasi pada partikel nano Fe3O4-kitosan sebesar 2,02 U/mg dengan besarnya penurunan aktivitas spesifik sebesar 95,52% dan efisiensi imobilisasi sebesar 4,48%. Pelarut yang digunakan dalam reaksi esterifikasi adalah pelarut n-hexane, isoamil alkohol, isobutanol dan t-butanol. Persen konversi esterifikasi tertinggi pada sintesis ester glukosa menggunakan lipase bebas adalah 22,92% dalam pelarut isoamil alkohol. Sementara itu, persen konversi tertinggi ester glukosa yang dihasilkan dengan katalis lipase Candida rugosa terimobilisasi tertinggi adalah 14,22% dengan pelarut isoamil alkohol. Persen konversi tertinggi pada sintesis ester sorbitol menggunakan Candida rugosa bebas adalah 25,66% sedangkan dengan lipase terimobilisasi sebesar 19,76%. Kedua reaksi tersebut berlangsung dalam pelarut isoamil alkohol.

---

In this study, glucose and sorbitol esters were synthesized enzimatically using free Candida rugosa lipase and immobilized Candida rugosa lipase on Fe3O4-chitosan nanoparticles. The loading percentage value obtaned in this study in immobilization of lipase was 31,28%. Free Candida rugosa lipase used in this esterification reaction has spesific activity of 45,12 U/mg. Otherwise, immobilized Candida rugosa lipase on Fe3O4-chitosan has spesific activity of 2,02 U/mg, with the decrease of its spesific activity 95,52% and immobilisation efficiency of 4,48%. Solvents used in the esterification reaction were n-hexane, isoamyl alcohol, isobutanol and t-butanol. The highest conversion percentage obtained in this study on the synthesis of glucose esters using free lipase was 22,92% using isoamyl alcohol as solvent. Meanwhile,the highest convertion percentage of glucose ester using immobilized Candida rugosa lipase was 14,22%, using isoamyl alcohol. The highest conversion percentage of glucose ester synthesis using immobilized Candida rugosa lipase was 14,22%, using isoamyl alcohol as solvent. The highest conversion percentage in the sorbitol ester synthesis using free Candida rugosa was 25,66% and when using immobilized lipase was 19,76%. Both of these reactions took place in isoamyl alcohol as solvent."

"Ester asam palmitat-sorbitol dapat disintesis dengan reaksi esterifikasi menggunakan lipase Candida rugosa terimobilisasi pada nanopartikel Fe3O4-kitosan. Nanopartikel Fe3O4-kitosan disintesis dengan metode kopresipitasi, selanjutnya digunakan sebagai material support dalam imobilisasi lipase. Nanopartikel F3O4 dan Fe3O4-kitosan dikarakterisasi menggunakan Fourier Transform Infra Red (FTIR), Vibrating Sample Magnetometer (VSM), Transmission Electron Microscopy (TEM), dan Field Emission Scanning Electron Microscopy (FESEM). Hasil analisis dengan TEM menunjukkan ukuran nanopartikel F3O4 dan Fe3O4-kitosan sebesar 12 nm dan 15 nm. Hasil analisis dengan VSM menunjukkan nilai magnetization saturation nanopartikel F3O4, dan Fe3O4-kitosan sebesar 112 dan 85,7 emu/gram. Persen loading lipase terimobilisasi yang didapat adalah 68,15 %. Aktivitas hidrolisis lipase terimobilisasi adalah 4,88 U/mL dengan aktivitas spesifik 1,39 U/mg dan efisiensi imobilisasi sebesar 3,53 %. Pada reaksi esterifikasi sorbitol dan asam palmitat, dilakukan beberapa variasi, yaitu rasio molar sorbitol : asam palmitat, waktu inkubasi, dan pelarut. Variasi rasio molar sorbitol : asam palmitat yang digunakan sebesar 1:30, 1:60, dan 1:90 (mmol/mmol). Variasi waktu inkubasi yang digunakan adalah 8, 12, dan 16 jam. Metil isobutil keton dan t-butanol digunakan sebagai pelarut. Persen konversi asam palmitat tertinggi diperoleh dengan pelarut t-butanol pada rasio molar 1:30 (mmol/mmol) dan waktu inkubasi 16 jam, dengan persen konversi sebesar 17,95 %.

---

Sorbitol-palmitic acid ester can be synthesized through an esterification reaction using Candida rugosa lipase immobilized on Fe3O4-chitosan nanoparticles. The Fe3O4-chitosan nanoparticles were synthesized using coprecipitation method and later were used as material support for the immobilized lipase. The F3O4 and Fe3O4-chitosan nanoparticles were characterized using Fourier Transform Infra Red (FTIR), Vibrating Sample Magnetometer (VSM), Transmission Electron Microscopy (TEM), and Field Emission Scanning Electron Microscopy (FESEM). Analysis of TEM showed that the size of F3O4 dan Fe3O4-chitosan nanoparticles were 12 nm and 15 nm in diameter respectively. Analysis of VSM showed that the magnetization saturation value of F3O4 dan Fe3O4-chitosan nanoparticles were 112 and 85.7 emu/gram respectively. The loading percentage of immobilized lipase obtained was 68.15%. The hydrolysis activity of immobilized lipase obtained was 4.88 U/mL with the specific activity of 1.39 U/mg and efficiency of immobilization was 3.53%. Some variations were made in the esterification reaction between sorbitol and palmitic acid such as molar ratio, time of incubation, and solvents. The molar ratio were variated as 1:30, 1:60, and 1:90 (mmol/mmol). The time of incubation were variated as 8, 12, and 16 hour. tbutanol and methyl isobutyl ketone were used as solvents. The highest conversion percentage value obtained using t-butanol as solvent, at the molar ratio of 1:30 (mmol/mmol), and time of incubation 16 hours with the value of 17.95%."