Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 62192 dokumen yang sesuai dengan query
cover
Silvya Yusri
"Biodiesel sebagai salah satu bahan bakar terbarukan memiliki kestabilan yang rendah terhadap reaksi oksidasi. Penambahan aditif antioksidan biodiesel seperti pirogalol belum bisa mengatasi masalah ini karena kelarutannya yang rendah pada biodiesel. Salah satu upaya peningkatan kelarutan pirogalol di dalam biodiesel adalah alkilasi pirogalol dengan metil linoleat melalui mekanisme radikalisasi dengan inisiator radikal 2,2-diphenyl-1-picrylhydrazyl DPPH. Reaksi ini menghasilkan derivat pirogalol berupa senyawa gabungan pirogalol-metil linoleat. Namun, produk yang dihasilkan berupa campuran dengan kandungan senyawa derivat pirogalol yang sangat kecil 1.
Berbagai penelitian tentang pemanfaatan zeolit sebagai molecular sieve untuk pemisahan senyawa hidrokarbon berdasarkan ukuran molekul telah banyak dilakukan. Keberagaman ukuran molekul dari campuran menyebabkan produk dapat dipisahkan dengan menggunakan molecular sieve berupa zeolit.
Pada penelitian ini, senyawa derivat pirogalol dipisahkan dari campuran produk melalui metode adsorpsi menggunakan zeolit. Proses pemisahan diawali dengan analisa komposisi campuran produk dengan menggunakan high performance liquid chromatography HPLC. Prediksi ukuran molekul dari campuran produk dilakukan menggunakan perangkat lunak Chemdraw 3D. Produk di dalam campuran kemudian dipisahkan melalui adsorpsi yang selektif terhadap ukuran molekul menggunakan 3 tipe zeolit dengan ukuran pori yang berbeda, yaitu SAPO-34 4, Na-Y 7 dan 13X 10. Campuran dengan ukuran beragam yang terdiri dari pirogalol 6, derivat pirogalol 8, dimer pirogalol 10 dan DPPH 13 berhasil dipisahkan.
Zeolit 13X sebagai zeolit dengan pori terbesar menunjukkan hasil optimal pada pemisahan senyawa derivat pirogalol dengan adsorpsinya yang hanya selektif untuk senyawa berukuran lebih kecil dari 10, yaitu derivat pirogalol dan pirogalol. Senyawa derivat pirogalol yang sudah teradsorpsi di dalam zeolit 13X didesorpsi dengan memvariasikan pelarut, suhu 26-55°C dan metode desorpsi satu tahap dan dua tahap untuk mendapatkan senyawa derivat pirogalol dengan kemurnian optimum. Kondisi optimum desorpsi didapatkan pada suhu 55°C dengan pelarut metanol melalui metode desorpsi dua tahap yang menghasilkan senyawa derivat pirogalol dengan kemurnian 10,2.

Biodiesel as one of the best potential renewable fuels has low stability against oxidative degradation. The addition of antioxidant additives such as pyrogallol has not been able to solve this problem due to its low solubility in biodiesel. One of the attempts to increase the solubility of pyrogallol in biodiesel was alkylation of pyrogallol with methyl linoleate through radicalization mechanism using 2,2 diphenyl 1 picrylhydrazyl DPPH which produces pyrogallol derivative in form of pyrogallol methyl linoleate compound. However, the products from this reaction were the mixture of several compounds with the very low concentration of pyrogallol derivative compound 1.
Several research about the use of zeolites as molecular sieves for separation of hydrocarbon compounds based on molecular size have been widely studied. The diversity of molecular sizes of product mixtures cause the products could be separated by using molecular sieves such as zeolites.
In this research, pyrogallol derivative compound was separated from the products mixture through adsorption method using zeolites. The separation process was started by analyzing the product composition using high performance liquid chromatography HPLC. The size of the compounds in the mixture was predicted by using Chemdraw 3D software. The products mixture were separated through size selective adsorption using 3 types of zeolites with different pore size, ie SAPO 34 4 , Na Y 7 and 13X 10. The mixture which consist of several compound with different size such as pyrogallol 6, pyrogallol derivative 8, dimer of pyrogallol 10 and DPPH 13 was successfully separated.
Zeolite 13X showed the best performance in separation of the pyrogallol derivative compound from the mixture due to its selective adsorption to the compound with the molecular size smaller than 10, pyrogallol and pyrogallol derivative compound. The desorption of pyrogallol derivative compound from 13X zeolite was done by varying the solvents, temperature 26-55°C and desorption method one step and two step desorption. The optimum desorption condition was at 55°C using methanol solvent through two step desorption, which resulting 10,2 of pyrogallol derivative compound."
Depok: Fakultas Teknik Universitas Indonesia, 2018
T51491
UI - Tesis Membership  Universitas Indonesia Library
cover
Zulfikar Naera
"Asap dari pembakaran banyak mengandung senyawa-senyawa yang berbahaya. Gas CO merupakan salah satu senyawa berbahaya yang dapat mengganggu kesehatan. Perlu dilakukan penelitian untuk mereduksi gas CO pada asap pembakaran. Pada penelitian ini dilakukan reduksi gas CO menggunakan zeolit. Zeolit alam terlebih dahulu diaktivasi dengan larutan HF 2%, HCl 6M, NH4Cl 0,1M, dan dikalsinasi. Hasil penelitian menunjukkan bahwa zeolit alam teraktivasi dengan ukuran partikel 53-106 mikron dapat menjerap gas CO sebesar 12,2% dari konsentrasi awal selama 20 menit.

Smoke from burning contains many harmful compounds. CO gas is a dangerous substance that can harm our health. Research needs to be done to reduce the CO gas in the combustion fumes. In this study, the reduction of CO gas using zeolite. First natural zeolite activated with a solution of 2% HF, 6M HCl, 0.1 M NH4Cl, and calcined. The results showed that activated natural zeolite with a particle size of 53-106 microns can adsorb CO gas by 12.2% of the initial concentration for 20 minutes."
Depok: Fakultas Teknik Universitas Indonesia, 2013
S52778
UI - Skripsi Membership  Universitas Indonesia Library
cover
Hery Sutanto
"Biodiesel adalah bahan bakar nabati terbarukan sebagai alternatif untuk bahan bakar diesel fosil yang memiliki banyak keunggulan. Namun, kandungan asam lemak tak jenuh yang tinggi menyebabkan ketidakstabilan oksidasi selama penyimpanan. Sejumlah aditif telah digunakan dan dikembangkan untuk mengatasi masalah ini seperti penggunaan antioksidan berbasis senyawa fenolik. Pyrogallol dilaporkan sebagai salah satu antioksidan fenolik terbaik untuk biodiesel. Akan tetapi, pyrogallol memiliki kelarutan yang rendah dalam larutan minyak. Dalam penelitian ini, kelarutan pyrogallol ditingkatkan dengan mensintesis turunan pirogallol melalui reaksi antara pyrogallol dan metil linoleat dengan menggunakan radikal 2,2-diphenyl-1-picrylhydrazyl atau DPPH. Metode spektrofotometri digunakan untuk uji kelarutan. Potensi antioksidan diperiksa menggunakan penentuan jumlah asam selama periode penyimpanan 4 minggu serta uji Rancimat untuk melihat kinerjanya dalam kondisi oksidasi yang dipercepat dan dibandingkan dengan senyawa aditif lain serta penggunaan surfaktan. Reaksi sintesis ini menghasilkan molekul yang memiliki berat molekul 418 g/mol, struktur molekul yang dihasilkan dari 1H-NMR, 13C-NMR dan 2D-HMQC adalah methyl (10E,12E)- 9-(2,6-dihydroxyphenoxy)octadeca-10,12-dienoate dan isomer methyl (9E,11E)-13-(2,6-dihydroxyphenoxy)octadeca-9,11-dienoate dengan yield 12.86% yang merupakan turunan pirogalol yang memiliki ikatan C-O baru dengan metil linoleat. Dibandingkan dengan pyrogallol dan tert-butylhydroquinone (TBHQ), turunan pyrogallol memiliki kelarutan tertinggi yaitu 19.438g/l biodiesel serta stabilitas angka asam dan bilangan iodin terbaik selama masa penyimpanan 4 pekan. Hasil induction time (IP) Rancimat dari produk tercatat 16.17 jam, hasil ini berada di atas standar SNI 7182:2015, ASTM D 6751, dan EN 14112 yaitu 6 jam.

Biodiesel is a renewable plant-based fuel as an alternative for fossil diesel fuel which has many advantages. However, its high content of unsaturated fatty acid causes an oxidation instability during storage. Numerous additives have been used and developed to overcome this problem such as the application of phenolic compound-based antioxidants. Pyrogallol is reported as one of the best phenolic antioxidants for biodiesel. Unfortunately, pyrogallol has a low solubility in oil solution. In this research, pyrogallol solubility is increased by preparing a pyrogallol derivative through a reaction between pyrogallol and methyl linoleate in the presence of radical 2,2-diphenyl-1-picrylhydrazyl or DPPH. The spectrophotometric method was used for solubility test. Antioxidant potential was examined using acid number determination during a 4 week storage period as well as the Rancimat test to see its performance under accelerated oxidation condition and compared to the other biodiesels additives. The reaction produced a molecule which has a molecular weight of 418 g/mol. By using 1H-NMR, 13C-NMR and 2D-HMQC the molecule was suggested to be methyl (10E,12E)- 9-(2,6-dihydroxyphenoxy)octadeca-10,12-dienoate and isomer methyl (9E,11E)-13-(2,6-dihydroxyphenoxy)octadeca-9,11-dienoate with a yield of 12.86%. Compared to pyrogallol and tert-butylhydroquinone (TBHQ), the pyrogallol derivative has the highest solubility with a value of 19.438g/l biodiesel, better activity in acid number and iodine value during 4 weeks storage. The induction period (IP) result of the pyrogallol derivative is 16.17 hours, above the SNI 7182:2015, ASTM D 6751 and EN 14112 standards in the accelerated oxidation (rancimat) test."
Depok: Fakultas Teknik Universitas Indonesia, 2019
D2749
UI - Disertasi Membership  Universitas Indonesia Library
cover
Luthfi Alfiandri
"Isatin (indoline-2,3-dione atau indole -1H-2,3-dione merupakan produk alami yang
banyak ditemukan pada tanaman yang bergenus Isatis dan pada Couropita
guiananci aub. Isatin dan senyawa turunannya memiliki berbagai aktivitas biologis
seperti senyawa anti kanker, anti jamur, anti oksidan, anti diabetes, anti HIV,
pelindung saraf, anti inflamasi, analgesik. Pada penelitian ini, dilakukan proses
sintesis dari senyawa turunan isatin dengan berbagai variasi prekusor dan
penggunaan MgCl2 sebagai katalis. Prekusor utama yang digunakan dalam
penelitian ini adalah Isatin dan Lawson (1,4 naphtoquinon) serta variasi
prekusornya berupa malononitril, hidrazin, fenil hidrazin, dan etil asetoasetat. Hasil
sintesis dari masing-masing variasi diisolasi untuk mendapatkan produk murni dan
dilakukan karakterisasi FT-IR. Untuk karakterisasi NMR dilakukan hanya untuk
produk variasi 1 dan variasi 3. Massa produk yang didapatkan setelah diisolasi
yakni variasi 1 sebesar 0.0378 gram; variasi 2 sebesar 0.0232 gram; variasi 3
sebesar 0.0494 gram; variasi 4 sebesar 0.0266 gram. Berdasarkan hasil NMR yang
dilakukan, produk variasi 1 dan variasi 3 bukan merupakan produk yang
diharapkan. Prediksi struktur dari produk variasi 1 memiliki rumus molekul
C11H7N3O dengan m/z 197

Isatin (indoline-2,3-dione or indole -1H-2,3-dione) is a natural product which is
found in many plants with the genus name of Isatis and in Couropita guiananci
aub. Isatin and its derivatives have various biological activities such as anti-cancer,
anti-fungi, anti-oxidants, anti-diabetes, anti-HIV, neuroprotective, antiinflammatory,
and analgesic. In this study, the synthesis process of isatin
derivatives with various precursors was carried out and the use of MgCl2 as a
catalyst. The main precursors used in this study were Isatin and Lawson (1,4
naphtoquinone) and its precursor variations in the form of malononitrile, hydrazine,
phenyl hydrazine, and ethyl acetoacetate. The synthesis results of each variation
were isolated to obtain a pure product and performed FT-IR characterization. and
variation 3. The mass of the product obtained after being isolated for variation 1 is
0.0378 grams; variation 2 is 0.0232 grams; variation 3 is 0.0494 grams; and
variation 4 is 0.0266 grams. Based on the results of the NMR, the product of
variation 1 and variation 3 was not the expected product. The predicted structure of
the product variation 1 has the molecular formula C11H7N3O with m / z 197
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2021
T-Pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Ayu Adi Perwitasari
"ABSTRAK
Informasi mengenai luas permukaan suatu material berpori sangat dibutuhkan,
khususnya di industri kimia yang menggunakan material berpori sebagai
adsorben, katalis, dll. Metode penentuan luas permukaan yang selama ini biasa
digunakan sering kali memberikan hasil yang kurang akurat akibat dari kondisi
operasi yang kurang fleksibel dan dapat merusak struktur dari material berpori
tersebut. Selain itu, metode penentuan luas permukaan yang selama ini digunakan
memiliki proses yang terlalu rumit.
Dalam penelitian ini, dipelajari metode penentuan luas permukaan yang lebih
sederhana, yaitu dengan menggunakan adsorpsi isotermis superkritis CO2 dengan
model Ono-Kondo. Dimana proses adsorpsi dengan model ini dapat dioperasikan
pada kondisi temperatur ruang (tekanan tinggi) yang diperkirakan akan
memberikan hasil yang lebih akurat. Pada penelitian ini, material beropori yang
digunakan dalam percobaan adsorpsi adalah zeolit, dengan tiga jenis zeolit yaitu
zeolit alam Lampung, zeolit alam Jawa Barat, dan zeolit alam Malang untuk
kemudian dilihat perbandingan hasil luas permukaan terukur dari ketiga jenis
zeolit ini. Proses adsorpsi berlangsung dengan variasi 2 temperatur yang
mendekati temperatur kritis (untuk CO2, triple point) dengan tekanan dari 100
hingga mencapai 700 psi untuk melihat pengaruh temperatur terhadap proses
adsorpsi.
Dari penelitian ini diperoleh bahwa adsorpsi isotermis superkritis CO2 model
Ono-Kondo dapat merepresentasikan adsorpsi hasil percobaan dengan baik.
Sehingga luas permukaan dari material berpori yang digunakan pada percobaan
ini dapat dihitung dari adsorpsi model Ono-Kondo tersebut. Dari hasil
perhitungan diperoleh bahwa zeolit alam Malang memiliki luas permukaan yang
lebih besar dibandingkan dengan zeolit alam Lampung dan Jawa Barat.

ABSTRACT
The informations about surface area of porous materials are really needed,
especially for chemical industries that using porous materilas as an adsorben,
catalyst, and etc. Determination of surface area that being used until now is often
give inaccurate results because of the operation conditions that inflexible and
sometimes destroy the structure of porous materials. Besides, the method for
measuring surface area that being used, have a complicated process.
This research observed a more simple method to determine surface area. It is use a
supercritical isotherm adsorption of CO2 using Ono-Kondo model. The adsorption
process using this model can be operated at an atmospheric temperatur (high
pressure) which is predicted will give more accurate results. In this experiment,
porous materials that used in adsorption process are three types of natural zeolites.
They are, natural zeolites from Lampung, natural zeolites from West Java, and
natural zeolites from Malang. The surface area of these adsorben then be
compared. The adsorption processes in this experiment use two different
temperatures that approtimate with critical temperature (for CO2, the triple point)
in the pressure from 100 to 700 psi. This various pressures is used to see the effect
of temperatures changing to the adsorption processes.
From this research, the researcher earn that the supercritical isotherm adsorption
of CO2 using Ono-Kondo model can represent the adsorption data from
experiment. As the result, the surface areas of porous materials that used in this
experiment can be calculated from Ono-Kondo model of adsorption. From this
research we earned that the surface areas of natural zeolite from Malang is bigger
than natural zeolite from West Java and Lampung."
2008
S49648
UI - Skripsi Open  Universitas Indonesia Library
cover
Purba, Ivana Angelica
"Indonesia berencana meningkatkan kapasitas energi terbarukannya dengan bioetanol dapat berkontribusi sebagai campuran bahan bakar kendaraan. Bioetanol harus memiliki kemurnian 99,5mol/mol% yang tidak dapat dicapai dengan teknologi konvensional karena adanya titik azeotrop. Oleh karena itu, dibutuhkan kombinasi teknologi seperti distilasi-adsorpsi. Penelitian ini menganalisis optimisasi kondisi operasi dan sizing proses distilasi dan adsorpsi pada pemisahan bioetanol-air. Proses distilasi disimulasikan menggunakan Aspen HYSYS v14, sedangkan sizing kolom dan kondisi operasi adsorber dilakukan secara manual menggunakan Microsoft Excel dengan data acuan proses adsorpsi adalah Pressure Swing Adsorption (PSA) dan desikan/adsorber zeolite sintetis 3A. Asumsi yang digunakan adalah masa pakai alat 10 tahun, masa ganti adsorben 2 tahun, dan interest rate 8% berdasarkan pada penelitian terdahulu (data sekunder). Komponen biaya adalah pembelian dan instalasi alat, serta pembelian adsorben sebagai Total Investment Cost (TIC), konsumsi listrik, steam, cooling water, dan penggantian adsorben sebagai Total Operational Cost (TOC), serta nilai Total Annual Cost (TAC) adalah TIC dikalikan dengan Capital Recovery Factor (CRF) ditambah TOC. Nilai TAC terkecil menjadi kondisi optimal, yang mana tercapai pada konsentrasi outlet kolom distilasi 85mol/mol%. Biaya TIC sebesar Rp37.731.845.143,27, TOC sebesar Rp73.315.142.410,87, dan TAC sebesar Rp78.938.300.000,17. Proses distilasi memerlukan energi sebesar 2,01 x 10^7 KJ/h (≈5580 kWh) dan PSA 2,0 x 10^5 KJ/h (≈55,5 kWh). Hasil penelitian ini dapat membantu industri dalam mengoptimalkan proses distilasi-adsorpsi untuk meningkatkan efisiensi dan mengurangi biaya operasional.

Indonesia plans to increase its renewable energy capacity by bioethanol can be utilized as fossil fuel blend. Bioethanol must have a purity of 99.5mol/mol%, which cannot be achieved with conventional technology due to the presence of an azeotropic point. Therefore, a combination of technologies such as distillation and adsorption is required. This study analyzes the optimization of operating conditions and process sizing for distillation and adsorption in bioethanol-water separation. The distillation process is simulated using Aspen HYSYS v14, while the sizing of the column and adsorber conditions are manually calculated using Microsoft Excel with data from the PSA process and zeolite synthetic adsorber 3A. Assumptions used include an equipment lifespan of 10 years, adsorbent replacement every 2 years, and an interest rate of 8% based on previous research (secondary data). The components of the cost include the purchase and installation of equipment, as well as the purchase of adsorbents as Total Investment Cost (TIC), electricity consumption, steam, cooling water, and adsorbent replacement as Total Operational Cost (TOC), and the value of Total Annual Cost (TAC) is the product of TIC and Capital Recovery Factor (CRF) plus TOC. The optimal condition is achieved at a concentration of 85mol/mol% in the outlet column of the distillation process. The TIC is approximately Rp37.731.845.143,27, TOC is approximately Rp73.315.142.410,87, and TAC is approximately Rp78.938.300.000,17. The distillation process requires energy of 2.01 x 10^7 KJ/h (approximately 5580 kWh) and PSA 2.0 x 10^5 KJ/h (approximately 55.5 kWh). This study's results can help industries optimize the distillation-adsorption process to increase efficiency and reduce operational costs."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Radhinaldi Muhammad
"Pertamina meluncurkan BBM Bioetanol RON 95 sebagai bahan bakar alternatif ramah lingkungan untuk mengurangi ketergantungan pada bahan bakar fosil dan emisi karbon. Bioetanol, bahan bakar nabati ini, merupakan langkah maju untuk transisi energi yang lebih berkelanjutan di Indonesia. Penelitian ini bertujuan untuk mengetahui kondisi optimal operasi dan sizing kolom proses distilasi dan adsorpsi pada pemisahan bioetanol-air. Metode yang digunakan pada penelitian ini adalah dengan simulasi menggunakan Unisim untuk proses distilasi dengan variabel keluaran distilasi yaitu 70%, 80%, 85%, dan 90%, dan Microsoft Excel untuk proses adsorpsi, di mana konsentrasi awal untuk bioetanol adalah sebesar 30% dan target spesifikasi produk bioetanol sebagai bahan bakar sebesar 99,5%. Pada penelitian ini diharapkan dapat menunjukkan nilai konsentrasi optimal yang diperoleh pada proses distilasi dan proses adsorpsi menggunakan desikan/adsorben gel silika. Optimasi yang dilakukan pada penelitian ini didasarkan pada analisis ekonomi (total annualized cost). Total annualized cost meliputi total investment cost dan total operating cost pada proses distilasi dan adsorpsi. Pada penelitian ini, diperoleh kondisi optimal untuk pemisahan bioetanol-air dengan proses distilasi-adsorpsi pada kemurnian etanol distilasi sebesar 85% dengan nilai total annualized cost sebesar $2,125,958.08,-.

Pertamina launched BBM Bioethanol RON 95 as an environmentally friendly alternative fuel to reduce dependence on fossil fuels and carbon emissions. Bioethanol, this biofuel, is a step forward for a more sustainable energy transition in Indonesia. This research aims to determine the optimal operating conditions and column sizing for the distillation and adsorption process in bioethanol-water separation. The method used in this research is simulation using Unisim for the distillation process with distillation output variables namely 70%, 80%, 85%, and 90%, and Microsoft Excel for the adsorption process, where the initial concentration for bioethanol is 30% v/v and the target specification for bioethanol products as fuel is 99.5% v/v. This research is expected to show the optimal concentration value that must be obtained in the distillation process and adsorption process using a desiccant/silica gel adsorbent. The optimization carried out in this research is based on economic analysis (total annualized cost). Total annualized costs include total investment costs and total operating costs in the distillation and adsorption processes. In this research, optimal conditions were obtained for the separation of bioethanol-water using the distillation-adsorption process at a purity of distilled ethanol of 85% with a total annualized cost of $2,125,958.08,-."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nada Jinan
"Senyawa turunan tiosemikarbazon merupakan senyawa yang mempunyai aktivitas biologis yang baik, yaitu sebagai antioksidan, antitumor, dan antimikroba. Pada penelitian kali ini, telah dilakukan sintesis senyawa turunan tiosemikarbazon dengan menggunakan limonen dan empat senyawa aldehid aromatik yang berbeda yaitu benzaldehid, 4-hidroksibenzaldehid, sinamaldehid, dan vanilin. Produk akhir senyawa turunan tiosemikarbazon yang terbentuk diidentifikasi menggunakan KLT serta dikarakterisasi menggunakan Fourier Transform Infrared spectroscopy (FTIR), Spektrofotometri UV-Vis, dan Gas Chromatography Mass Spectrometry (GC-MS). Produk akhir senyawa turunan tiosemikarbazon diuji aktivitas antioksidannya dengan menggunakan metode 1,1-Difenil-2-pikril-hidrazil (DPPH). Pada penelitian ini diperoleh produk benzaldehid limonen tiosemikarbazon dengan persen rendemen sebesar 58,18%, 4-hidroksibenzaldehid limonen tiosemikarbazon dengan persen rendemen sebesar 49,47%, vanilin limonen tiosemikarbazon dengan persen rendemen sebesar 43,91%, dan sinamaldehid limonen tiosemikarbazon dengan persen rendemen sebesar 73,01%. Kemampuan antioksidan tertinggi diperoleh oleh senyawa vanilin limonen tiosemikarbazon dengan nilai IC50 sebesar 108,8 ppm dan kemampuan antioksidan terendah diperoleh oleh senyawa benzaldehid limonen tiosemikarbazon dengan nilai IC50 sebesar 177,2 ppm.

Thiosemicarbazone derivatives are compounds that have good biological activity, such as antioxidant, antitumor, and antimicrobial. In this study, thiosemicarbazones derivative compounds were synthesized using limonene and four different aromatic aldehydes, such as benzaldehyde, 4-hydroxybenzaldehyde, cinnamaldehyde, and vanillin. The final product of the thiosemicarbazone derivatives were identified using TLC and characterized using Fourier Transform Infrared spectroscopy (FTIR), UV-Vis Spectrophotometry, and Gas Chromatography-Mass Spectrometry (GC-MS). The final product of the thiosemicarbazone derivatives were tested for its antioxidant activity using the 1,1-Diphenyl-2-picryl-hydrazyl (DPPH) method. In this study, the products obtained were benzaldehyde limonene thiosemicarbazone with a yield percentage of 58.18%, 4-hydroxybenzaldehyde limonene thiocarbazone with a yield percentage of 49.47%, vanillin limonene thiosemicarbazone with a yield percentage of 43.91%, and cinnamaldehyde limonene thiosemicarbazone with a yield percentage of 73.01%. The highest antioxidant ability was obtained by vanillin limonene thiosemicarbazone with an IC50 value of 108.8 ppm and the lowest antioxidant ability was obtained by benzaldehyde limonene thiosemicarbazone with an IC50 value of 177.2 ppm."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2022
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Siregar, Syawitri P
"Virus ebola salah satu virus yang dapat menyebabkan penyakit bersifat letal (mematikan) dan menyebabkan perdarahan (hemorrhagic). Penularannya dapat terjadi dari manusia ke manusia, hewan (nonhuman-primata) ke manusia. Angka kematian yang disebabkan oleh virus ebola dapat mencapai ribuan jiwa dengan spesies yang sangat berbahaya adalah Zaire ebolavirus dari lima spesies yang ada. Hingga saat ini baik antiviral maupun vaksin yang efektif bagi manusia belum ditemukan. Dalam penelitian ini toremifen sebagai senyawa modulator estrogen reseptor (MER) dipilih sebagai sumber database ligan. Database ligan menggunakan metode flexophor yang memperhitungkan titik farmakofor. Metode ini menghasilkan 16001 derivat toremifen, kemudian discreening menggunakan paramater RO5 untuk mendapatkan senyawa- senyawa yang bersifat druglikeness. Sebanyak 9876 senyawa derivat toremifen diperoleh dari proses screening. Hasil screening kemudian digenerate dengan metode farmakofor untuk mendapatkan hits ligan. Sejumlah 580 hits ligan diperoleh pada proses penentuan titik farmakofor. Kemudian simulasi docking dilakukan sebanyak tiga kali pada hits ligan. Simulasi docking diawali dengan rigid docking, dilanjutkan dengan rigid docking dengan retain yang berbeda. Tujuan pengulangan rigid docking ini adalah untuk memvalidasi hasil docking awal. Simulasi docking terakhir yang dilakukan adalah flexible docking. Sebanyak 576 ligan diperoleh dari tiga tahapan simulasi docking. Sebanyak 576 ligan ini diseleksi berdasarkan nilai ΔG binding , nilai RMSD lebih kecil dari 2. Dari 576 ligan tersebut dipilih 63 ligan dengan nilai RMSD lebih kecil dari 2, kemudian dipilih kembali tiga ligan sebagai kandidat potensial senyawa obat yaitu L579, L533 dan L194. Kandidat potensial senyawa obat ini dipilih berdasarkan ligan interaksi dan hasil farmakologi. Untuk pemilihan senyawa terbaik sebagai antiviral potensial dilakukan simulasi dinamik untuk melihat kestabilan senyawa tersebut. Berdasarkan nilai ΔG binding , RMSD, ligan interaksi, hasil farmakologi, dan simulasi dinamik disimpulkan bahwa ligan dengan kode L533 adalah ligan terbaik sebagai senyawa potensial antiviral ebola dengan nilai ΔG binding -10,4460 kcal/mol, RMSD 0.4697 Å. Hasil farmakologi juga menunjukkan bahwa L533 memiliki karakteristik yang baik sebagai antiviral.
Ebola virus is one of the virus that causes lethal disease and bleeding (hemorrhagic). Transmission can occur from human to human, animal (nonhuman primate) to humans. The number of deaths caused by viral ebola can reach thousands of lives with most dangerous species is Zaire ebolavirus from five existing species. Until now neither antiviral nor an effective vaccine for humans have been found. In this study toremifene as modulator estrogen receptor compound (MER) was selected as the source of ligand database. The ligand database uses the flexophore method that takes into account the pharmacophore point. This method produces 16001 toremifene derivatives, then screened using RO5 parameters to obtain druglikeness compounds. A total of 9876 toremifene derivative compounds were obtained from the screening process. The screening results are then generated by the pharmacophore method to obtain ligand hits. A total of 580 ligand hits were obtained at the farmakofore point determination process. Ligand hits are then simulated docking three times. The docking simulation begins with rigid docking. Rigid docking was applied twice with different retain. The purpose of this rigid docking repetition is to validate the initial docking results. The last docking simulation is flexible docking. A total of 576 ligands were obtained from three stages of docking simulation. As many as 576 ligands were selected based on ΔG binding , RMSD less than 2. From 576 ligands were selected 63 ligands with RMSD less than 2. For further step, three selected ligands were choosen. Three selected ligands as candidate of drug compound are L579, L533 and L194. These candidates were selected based on interaction ligand and pharmacological analysis. Dynamics simulation was done to see the stability of the compound for the selection of the best potential antiviral. The selection based on ΔG binding, RMSD, ligand interaction, pharmacology analysis and dynamics simulation. Finally, it was concluded that L533 was the best ligand as a potential antiviral with ΔG binding -10.4460 kcal/ mol, RMSD 0.4697 A. The pharmacological analysis also show that L533 has good characteristics as an antiviral."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2018
T50666
UI - Tesis Membership  Universitas Indonesia Library
cover
Linggar Anindita
"Limbah cair industri tahu biasanya dibuang langsung ke lingkungan tanpa melalui pengolahan terlebih dahulu sehingga berbahaya bagi lingkungan. Kandungan COD dan TSS pada limbah cair tahu melebihi ambang batas yang maksimal yang ditentukan oleh pemerintah. Metode ozonasi dan adsorpsi diketahui mampu mendegradasi kandungan senyawa organik dan anorganik pada limbah cair secara efektif. Penelitian ini ditujukan untuk mengetahui kinerja pengolahan limbah cair industri tahu dengan metode ozonasi, adsorpsi dengan zeolit alam lampung ZAL, dan kombinasi keduanya. Sampel akan dialiri ke dalam kolom unggun diam yang diisi oleh zeolit dan dialirkan ozon dengan waktu 60 menit dan 120 menit. Efektivitas metode ini dievaluasi dari angka COD dan TSS yang terdegradasi dengan memvariasikan dosis ozon dan jumlah zeolit alam 50 g, 75 g, dan 100 g. Hasil terbaik dicapai menggunakan kombinasi metode ozonasi dan adsorpsi menggunakan 100 g zeolit dan dosis ozon sebesar 155,1 mg/jam yang menghasilkan penyisihan COD dan TSS sebesar 253 mg/L dan 29 mg/L.

Tofu industrial wastewater is usually disposed directly without undergo waste treatment that would endanger the environment. The number of COD and TSS in tofu industrial wastewater is exceed maximum number of COD and TSS number that determined by government. Ozonation and adsorption method are well known method that able to degrade organic and inorganic compounds in wastewater effectively. In this research, the removal of COD and TSS in tofu industrial wastewater was examined by ozonation method, adsorption method using zeolit alam lampung, and combination of them. The sample is passed into the packed bed column containing zeolite and using ozone in 60 minutes and 120 minutes. The method effectiveness was evaluated by COD and TSS degradation with variation of the dosage of ozone and amount of natural zeolite 50 g, 75 g, and 100 g . The best result is achieved when using combination of ozonation and adsorption with 100 g zeolite and dosage of ozone of 155.1 mg h that produced 253 mg L and 29 mg L removal of COD and TSS."
Depok: Fakultas Teknik Universitas Indonesia, 2017
S67887
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>