Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 73596 dokumen yang sesuai dengan query
cover
Mohamad Irfan Wibisono
"

Biji Wijen merupakan salah satu produk alam yang kaya akan minyak nabati dan bermanfaat bagi kesehatan. Minyak wijen juga sering digunakan sebagai bahan campuran pada masakan karena cita rasanya yang lezat. Dengan proses pengolahan yang optimum, produk minyak wijen dapat menjadi komoditas yang bernilai tinggi.  Estimasi dua parameter proses ekstraksi, yaitu konstanta laju desorpsi dan koefisien difusi solut dalam pelarut, telah dilakukan dengan menggunakan model difusi bola panas pada temperatur 303 K, 318 K, dan 333 K dengan tekanan 8 MPa, 10 MPa, dan 12 MPa. Pelepasan asam lemak dari partikel biji wijen diasumsikan dengan model desorpsi. Penyelesaian perhitungan model ekstraksi dilakukan dengan program COMSOL Multiphysics 5.5. Nilai konsentrasi awal yang diperoleh sebesar 4.980 mol/m3. Konstanta laju desorpsi pada temperatur 303 K dengan tekanan 8 MPa dan 12 MPa sebesar 3,4×10-4 s-1 dan 2,00×10-3 s-1. Selain itu, pada temperatur 333 K dengan tekanan 8 MPa dan 12 MPa diperoleh 6,70×10-3 s-1 dan 1,02×10-2 s-1. Sedangkan, pada temperatur 318 K dan tekanan 10 MPa diperoleh nilai sebesar 4,60×10-3 s-1. Untuk nilai koefisien difusi solut dalam pelarut, diperoleh nilai sebesar 3,4×10-9 m2/s dan 4,22×10-9 m2/s pada temperatur 303 K dan tekanan 8 MPa dan 12 MPa. Pada temperatur 333 K dan tekanan 8 MPa dan 12 MPa, diperoleh nilai koefisien sebesar 4,18×10-9 m2/s dan 4,16×10-9 m2/s. Sedangkan pada temperatur 318 K dan tekanan 10 MPa, diperoleh nilai koefisien difusi solut sebesar 4,39×10-9 m2/s. Nilai-nilai tersebut cukup baik untuk menggambarkan fenomena ekstraksi yang sesungguhnya jika ditinjau dari nilai AARD yang diperoleh, yaitu 8,15%.


Sesame seed is one of the natural products that is rich in vegetable oil content which has a bunch of benefits for health. Besides, sesame oil is often used as ingredient on foods because of its richness and delicious flavor. Under the optimum processing, Sesame oil product is possibly be high value commodity. Estimation of two extraction process parameters, desorption rate constants and solute diffusion coefficients, has been done by using hot ball diffusion model at temperatures of 303 K, 318 K, 333 K; and pressures of 8 MPa, 10 MPa, and 12 MPa. Discharge of fatty acids from sesame seed particles are assumed by desorption model. Completion of extraction model calculation is done by COMSOL Multiphysics 5.5. The initial concentration value obtained is 4.980 mol/m3. The estimated values of desorption rate constants at temperature of 303 K and pressures of 8 MPa and 12 MPa were 3,40×10-4 s-1 and 2,00×10-3 s-1. Other than that, the estimated values of desorption rate at temperature of 333 K and pressures of 8 MPa and 12 MPa are 6,70×10-3 s-1 and 1,02×10-2 s-1, while at the temperature of 318 K and pressure of 10 MPa is 4,60×10-3 s-1. Meanwhile, the solute diffusion coefficients at temperature of 303 K and pressures of 8 MPa and 12 MPa are 6,55×10-9 m2/s and 4,22×10-9 m2/s. At temperature of 333 K and pressures of 8 MPa and 12 MPa, the coefficients are 4,18×10-9 m2/s dan 4,16×10-9 m2/s, while at the temperature of 318 K and pressure of 10 MPa is 4,39×10-9 m2/s. Those values are good to describe the real extraction phenomenon when it is viewed from the AARD value obtained, that is 8,15%.

"
Depok: Fakultas Teknik Universitas Indonesia , 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Aris Romadhon Subkhan
"Potensi mikroalga sebagai sumber bioenergi dapat dilihat dari tingginya kandungan asam lemaknya. Asam lemak dari mikroalga dapat diekstraksi dengan metode Ekstraksi Fluida Superkritis (EFS). EFS dapat dideskripsikan menggunakan model matematis untuk mendapatkan parameter proses. Pada penelitian ini, dilakukan estimasi parameter proses berupa konstanta laju desorpsi (kd) dan koefisien difusi biner (DAB) untuk EFS asam lemak dari Nannochloropsis sp. Model matematis yang digunakan adalah model difusi bola panas dengan mekanisme pelepasan asam lemak ke dalam pelarut menggunakan pendekatan model desorpsi. Nilai kd yang didapatkan meningkat seiring naiknya tekanan dan suhu yaitu 5,1x10-5 s-1, 6,3x10-4 s-1, 9x10-4 s-1, 1x10-3 s-1 untuk masing-masing kondisi operasi 313K dan 12,5MPa, 313K dan 20MPa, 313K dan 30MPa, dan 333K dan 30MPa. Sementara itu, nilai DAB yang didapatkan 3,9x10-12 m2/s untuk 313K dan 12,5MPa, 5,8x10-12 m2/s untuk 313K dan 20MPa, 3x10-11 m2/s untuk 313K dan 30MPa, dan 5x10-11 m2/s untuk 333K dan 30MPa. Nilai eror dikoreksi dengan AARD dan didapatkan nilai 4,65%, 12,87%, 4,19%, dan 4,29% untuk masing-masing kondisi operasi 313K dan 12,5MPa, 313K dan 20MPa, 313K dan 30MPa, dan 333K dan 30MPa.

Potential microalgae as a source of bioenergy can be seen from the high content of fatty acids. Fatty acids from microalgae can be extracted by Supercritical Fluid Extraction (SFE) method. SFE can be described using a mathematical model to get the process parameters. In this study, the process parameters desorption rate constant (kd) and binary diffusion coefficient (DAB) was estimated for fatty acid SFE from Nannochloropsis sp. The mathematical model used is a hot sphere diffusion with the mechanism of release of fatty acids into the solvent using the desorption model. The value of kd obtained increases with increasing pressure and temperature, namely 5.1x10-5 s-1, 6.3x10-4 s-1, 9x10-4 s-1, 1x10-3 s-1 for each operating conditions, 313K and 12.5MPa, 313K and 20MPa, 313K and 30MPa, and 333K and 30MPa. Meanwhile, DAB values ​​obtained were 3.9x10-12 m2/s for 313K and 12.5MPa, 5.8x10-12 m2/s for 313K and 20MPa, 3x10-11 m2/s for 313K and 30MPa, and 5x10-11 m2/s for 333K and 30MPa. Error-values ​​were corrected with AARD and obtained of 4.65%, 12.87%, 4.19%, and 4.29% for each operating condition of 313K and 12.5MPa, 313K and 20MPa, 313K and 30MPa, and 333K and 30MPa."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Irfan Salahuddin
"Penelitian ini bertujuan untuk mendapatkan model matematis yang valid untuk ekstraktor unggun diam untuk proses ekstraksi asam lemak dari mikroalga Nannochloropsis sp. dan mendapatkan parameter kinetika ekstraksi asam lemak dari Nannochloropsis sp. Ekstraksi senyawa asam lemak dilakukan menggunakan metode ekstraksi fluida superkritis (EFS) dengan fluida superkritis CO2. Dalam penelitian ini, proses EFS akan dipelajari dengan menggunakan model inti menyusut, dan perhitungan model terkait neraca massa proses ekstraksi dilakukan secara numeris metode implisit Crank-Nicolson dengan program MATLAB R2020b. Estimasi parameter-parameter proses ekstraksi asam lemak dari mikroalga Nannochloropsis sp. dengan fluida CO2 superkritis telah berhasil dilakukan. Nilai konsentrasi awal solut dalam padatan adalah 420 mol/m3. Parameter-parameter nilai koefisien difusivitas efektif solut dalam pelarut, koefisien perpindahan massa solut dalam fluida-padat, dan nilai konsentrasi jenuh masing-masing diperoleh pada empat kondisi operasi, yaitu pada suhu 313 K dan tekanan 12,5 MPa, 20 MPa, 30 MPa, dan juga pada suhu 333 K dan tekanan 30 MPa. Nilai deviasi relatif mutlak (AARD) yang didapat setelah membandingkan hasil simulasi dengan data eksperimen rata-rata adalah masing-masing sebesar 4,481%, 3,628%, 16,846%, dan 32,328% untuk kondisi operasi 313 K dan 12,5 MPa, 313 K dan 20 MPa, 313 K dan 30 MPa, dan 333 K dan 30 MPa, yang menandakan model ini kurang dapat mereproduksi hasil eksperimen ekstraksi asam lemak dari Nannochloropsis sp. pada tekanan tinggi.

The purpose of this research experiment is to obtain a valid mathematical model for fixed bed extractor extraction process of fatty acid from microalgae Nannochloropsis sp. and obtaining fatty acid extraction kinetic parameters from microalgae Nannochloropsis sp. Supercritical fluid extraction (SFE) method with CO2 supercritical fluid is used as the extraction method to extract the fatty acid compounds from microalgae Nannochloropsis sp. In this research, study of SFE process will use the shrinking core model and calculations related to mass balances of the extraction process will be carried out numerically by Crank-Nicolson implicit method using MATLAB R2020b program. Process parameters estimation of fatty acid supercritical fluid extraction from spent coffee grounds had been carried out successfully. Initial solid solute concentration value is 420 mol/m3. Extraction parameters, which are effective diffusivity coefficient, solute in solid-fluid mass transfer coefficient, and saturated concentration are each obtained under four operating conditions, namely at a temperature of 313 K and a pressure of 12.5 MPa, 20 MPa, 30 MPa, and at a temperature of 333 K and a pressure of 30 MPa. Comparison of reference experimental data with simulation from this experiment resulted on AARD values (average absolute relative deviation) of 4.65%, 12.87%, 4.19%, and 4.29% for 313K and 12.5MPa, 313K and 20MPa, 313K and 30MPa and 333K and 333K and 30MPa respectively, which shows that this model is less able to reproduce the experimental results of fatty acid extraction from Nannochloropsis sp. at high pressure."
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
David Nicodemus Yanuar
"Penelitian ini bertujuan untuk mendapatkan model matematis yang valid untuk ekstraktor unggun diam untuk proses ekstraksi asam lemak dari ampas kopi, serta mendapatkan parameter kinetika ekstraksi asam lemak dari ampas kopi, dan mendapatkan pengaruh variabel proses terhadap kinerja ekstraktor. Metode ekstraksi senyawa asam lemak menggunakan metode ekstraksi fluida superkritis (EFS) dengan fluida superkritis CO2. Dalam penelitian ini, proses EFS akan dipelajari dengan menggunakan model inti menyusut, dan perhitungan model terkait neraca massa proses ekstraksi dilakukan secara numeris metode implisit Crank-Nicolson dengan program MATLAB R2020b. Estimasi parameter-parameter proses ekstraksi asam lemak dari ampas kopi dengan fluida CO2 superkritis telah berhasil dilakukan. Nilai konsentrasi awal solut dalam padatan adalah 130 mol/m3. Parameter-parameter nilai koefisien difusivitas efektif solute dalam pelarut, koefisien perpindahan massa solute dalam fluida-padat, dan nilai konsentrasi jenuh masing-masing dapat diperoleh pada masing-masing kondisi yaitu 20 MPa, 313 K, 20 MPa, 313 K, 20 MPa, 333 K, 30 MPa, 313 K, 30 MPa, 333 K, 40 MPa, 313 K, 40 MPa, 333 K, dan 50 MPa, 313 K. Nilai rata-rata deviasi relatif mutlak (AARD) yang didapat setelah membandingkan hasil simulasi dengan data eksperimen rata-rata adalah 6.951% dari seluruh kondisi operasi, sehingga menandakan model ini dapat mensimulasikan proses ekstraksi asam lemak dari ampas kopi menggunakan fluida superkritis dengan baik.

The purpose of this experiment is to obtain a valid mathematical model for fixed bed extractor extraction process of fatty acid from spent coffee grounds, obtaining fatty acid extraction kinetic parameters from spent coffee grounds, and obtaining the effect of process variables on extractor performance. Supercritical fluid extraction (SFE) method with CO2 supercritical fluid is used as the extraction method to extract the fatty acid compounds from spent coffee grounds. In this research, study of SFE process will use the shrinking core model and calculations related to mass balances of the extraction process will be carried out numerically by Crank-Nicolson implicit method using MATLAB R2020b program. Process parameters estimation of fatty acid supercritical fluid extraction from spent coffee grounds had been carried out successfully. Initial in solid solute concentration is 130 mol/m3. Extraction parameters, which are effective diffusivity coefficient, solute in solid-fluid mass transfer coefficient, and saturated concentration are obtained for each operating condition, 20 MPa, 313 K, 20 MPa, 333 K, 30 MPa, 313 K, 30 MPa, 333 K, 40 MPa, 313 K, 40 MPa, 333 K, and 50 MPa, 313 K. Comparison of reference experimental data with simulation from this experiment resulted on an average of 6.951 % of the absolute average relative deviation (AARD) value from all operational conditions, which shows that the model can be used to simulate fatty acid supercritical fluid extraction from spent coffee grounds well with a small amount of error."
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Jason Emerald Iskandar
"Deep Eutectic Solvent (DES) merupakan solven yang dapat dijadikan sebagai pelarut ekstraksi untuk deasidifikasi asam lemak bebas dari minyak inti sawit. Pelarut tersebut memiliki toksisitas rendah dan tidak mereduksi kandungan senyawa anti-oksidan di PKO/CPKO. Penelitian ekstraksi asam lemak bebas menggunakan DES berbasis kolin klorida dan polialkohol telah dibuktikan untuk mengekstraksi asam palmitat pada minyak sawit. Tujuan penelitian ini adalah untuk menggunakan DES berbasis kolin klorida dengan HBD 1,2-hexandiol dengan berbagai rasio molar terhadap kolin klorida untuk meninjau kelarutannya terhadap asam laurat pada PKO. Selain itu, melakukan ekstraksi asam laurat pada PKO untuk mendapatkan jumlah tahapan ekstraksi untuk mencapai mutu PKO asam lemak bebas dibawah 0.3%. Kemudian, perbedaan kelarutan asam lemak bebas yang berbeda pada minyak dalam DES pun ditinjau. Hasil penapisan menunjukan DES terbaik dengan HBA kolin klorida dan HBD 1,2 heksandiol dengan rasio molar 1:8 yang dapat memisahkan asam lemak bebas dari model minyak inti sawit dengan efisiensi ekstraksi maksimum 61.0%. Selain itu, dibutuhkan 4 jumlah tahapan ekstraksi agar kandungan asam lemak bebas pada model minyak inti sawit di bawah 0.3% mutu SNI 2012. Hasil dari penelitian menunjukan perbedaan efisiensi DES dalam mengekstraksi asam lemak bebas yang berbeda dalam minyak inti sawit, dimana bertambahnya 2 jumlah atom karbon pada asam dapat menyebabkan penurunan yield ekstraksi DES sebesar 11%.

Deep Eutectic Solvent (DES) is a solvent that can be used for the extraction of free fatty acids from palm kernel oil. This solvent has low toxicity and does not reduce the content of antioxidant compounds in PKO/CPKO. Research on the extraction of free fatty acids using DES based on choline chloride and polyalcohol has been proven effective in extracting palmitic acid from palm oil. The objective of this study is to use choline chloride-based DES with 1,2-hexanediol as the hydrogen bond donor (HBD) at various molar ratios to examine its solubility towards lauric acid in PKO. Additionally, the extraction of lauric acid from PKO is performed to determine the number of extraction stages required to achieve a free fatty acid content in PKO below 0.3%. Furthermore, the interaction between DES and different fatty acid contents in the oil is investigated. The screening results identified the best DES with choline chloride as the hydrogen bond acceptor (HBA) and 1,2-hexanediol as the HBD, at a molar ratio of 1:8, which effectively separated free fatty acids from a palm kernel oil model with a maximum extraction efficiency of 61.0%. Moreover, it was found that four extraction stages were required to reduce the free fatty acid content in the palm kernel oil model below the 0.3% threshold specified by the SNI 2012 quality standard. Different interactions of DES in extracting different free fatty acids from palm kernel oil were observed, where an increase of two carbon atoms in the fatty acid led to an 11% decrease in the extraction yield of DES."
Depok: Fakultas Teknik Universitas Indonesia, 2023
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Audry Ramadhany
"Ampas kopi adalah salah satu limbah utama hasil penyeduhan kopi dengan berat mencapai 91% berat awal bahan baku kopi. Dengan komposisi lemak sebesar 14,7% di dalam ampas kopi, penanganan serta pemanfaatan limbah ini semakin menarik untuk dilakukan. Estimasi dua parameter proses ekstraksi asam lemak dari ampas kopi dengan CO2 superkritis, yaitu koefisien difusi solut dalam pelarut dan konstanta laju desorpsi, telah berhasil dilakukan dengan menggunakan model difusi bola panas pada temperatur 313 K dan 333K, tekanan 20 MPa, 30 MPa, 40 MPa, dan 50 MPa. Pada model ini, pelepasan asam lemak partikel ampas kopi diasumsikan dengan model desorpsi. Penyelesaian perhitungan model ini dilakukan dengan menggunakan program COMSOL Multiphysics. Pada penelitian ini, nilai koefisien difusi solut yang didapatkan pada tekanan 20 MPa dan temperatur 313 K serta 333 K adalah sama yaitu 1 x 10-10 m2/s, pada tekanan 30 MPa dan temperatur 313 K serta 333 K adalah sama yaitu 1,2 x 10-10 m2/s, pada tekanan 40 MPa dan temperatur 313 K serta 333 K adalah sama yaitu 1,3 x 10-10 m2/s, dan pada tekanan 50 MPa dan temperatur 313 K adalah sama yaitu 1,4 x 10-10 m2/s. Nilai konstanta laju desorpsi yang didapatkan pada tekanan 20 MPa dan temperatur 313 K serta 333 K secara berurutan yaitu 0,35 x 10-4 s-1 dan 0,12 x 10-4 s-1, pada tekanan 30 MPa dan temperatur 313 K serta 333 K secara berurutan yaitu 1,2 x 10-4 s-1 dan 0,9 x 10-4 s-1, pada tekanan 40 MPa dan temperatur 313 K serta 333 K secara berurutan yaitu 11 x 10-4 s-1 dan 9 x 10-4 s-1, dan pada tekanan 50 MPa dan temperatur 313 K yaitu 13 x 10-4 s-1.

Spent coffee grounds are one of the prior wastes from coffee brewing with up to 91% of raw coffee material weight. With a fat composition of 14.7% in spent coffee grounds, the treatment and utilization of this waste is increasingly interesting to do. Estimation of two process parameter of supercritical CO2 extraction of fatty acids from spent coffee grounds, solute on solvent diffusion coefficient and desorption rate constant, has been successfully carried out using hot sphere diffusion models at temperatures of 313 K and 333K, pressures of 20 MPa, 30 MPa, 40 MPa and 50 MPa. In this model, the release of fatty acids from spent coffee grounds particle is assumed by the desorption model. This model calculation is done using the COMSOL Multiphysics program. In this study, the value of solute on solvent diffusion coefficient obtained at 20 MPa, 313 K and 333 K are identical, which is 1 x 10-10 m2/s, at 30 MPa, 313 K and 333 K are identical, which is 1.2 x 10-10 m2/s, at 40 MPa, 313 K and 333 K are also identical, which is 1.3 x 10-10 m2/s, and at 50 MPa, 313 K are 1.4 x 10-10 m2/s. The value of desorption rate constant obtained at 20 MPa, 313 K and 333 K are 0,35 x 10-4 s-1 and 0,12 x 10-4 s-1, at 30 MPa, 313 K and 333 K are 1.2 x 10-4 s-1 and 0.9 x 10-4 s-1, at 40 MPa, 313 K and 333 K are 11 x 10-4 s-1 dan 9 x 10-4 s-1, at 50 MPa, 313 K are 13 x 10-4 s-1."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Damanaik, Chrisyen
"Kemoterapi merupakan salah satu metode utama dalam penanganan kanker namun memiliki sifat vesican dan iritan yang memicu terjadinya flebitis. Respon kerusakan jaringan akibat flebitis ialah nyeri. Penelitian ini bertujuan mengetahui efektivitas pemberian minyak wijen terhadap intensitas nyeri flebitis pada pasien kanker yang menjalani kemoterapi. Penelitian ini menggunakan desain Randomized Controlled Trial. Jumlah sampel empat puluh orang yang terdiri dari 2 kelompok: kontrol dan intervensi. Analisis dengan Paired T test menunjukkan adanya perbedaan signifikan rata-rata skor intensitas nyeri sebelum dan setelah intervensi (p=0,001) dan hasil analisis Independent T test terdapat perbedaan signifikan rata-rata skor intensitas nyeri antara kelompok kontrol dan intervensi setelah intervensi (p=0,001). Berdasarkan hal tersebut direkomendasikan bahwa minyak wijen dapat digunakan untuk menurunkan intensitas nyeri pada pasien flebitis yang menjalani kemoterapi.

Chemotherapy is one of the main methods in the treatment of cancer but has a vesicant and irritant that trigger of phlebitis. The response tissue damage due to of phlebitis is pain. This study aimed to determine the effectiveness administration of sesame oil to pain intensity of phlebitis in cancer patients undergoing chemotherapy. This study used a randomized controlled trial design. Forty samples were devided groups: control and intervention groups. This study analysed was Paired T test showed a significant mean difference pain intensity scores before and after intervention (p = 0.001) and the results showed that there was a significant difference between two groups (p = 0.001). These results recommended that sesame oil can be used to reduce phlebitis pain in patients undergoing chemotherapy.
"
Depok: Fakultas Ilmu Keperawatan Universitas Indonesia, 2014
T41874
UI - Tesis Membership  Universitas Indonesia Library
cover
Fayola Adel Talitsa
"Minyak kelapa sawit mengandung beberapa pengotor termasuk asam lemak bebas yang dapat menurunkan kualitas produk. Konsentrasi asam lemak yang aman untuk dikonsumsi tidak lebih dari 0,3% menurut SNI. Umumnya, steam stripping digunakan untuk menghilangkan asam lemak, namun antioksidan alami juga ikut hilang dari minyak kelapa sawit karena suhu yang tinggi. Oleh karena itu, Deep Eutectic Solvent diinovasikan sebagai pelarut alternatif untuk proses ekstraksi asam lemak bebas pada minyak kelapa sawit dibandingkan dengan pelarut konvensional yang memiliki dampak negatif bagi kesehatan. Beberapa penelitian telah dilakukan untuk menghilangkan asam palmitat (sebagai asam lemak dengan konsentrasi tertinggi dalam minyak kelapa sawit) dengan menggunakan berbagai macam HBD dan HBA. Selain itu, asam oleat juga memiliki konsentrasi yang cukup tinggi, kedua setelah asam palmitat, yaitu sekitar 40% dari total asam lemak dalam minyak sawit. Dari penelitian ini, DES dengan kombinasi betaine anhidrat dengan 1,2-Heksandiol dengan rasio molar 1:9 memiliki kelarutan asam oleat yang paling tinggi dibandingkan dengan 1,2-Propandiol, 1,2-Butandiol, dan 1,2-Oktandiol. Hasil efisiensi ekstraksi sebesar 65% dengan empat tahap ekstraksi untuk mendapatkan konsentrasi asam oleat dalam minyak kelapa sawit di bawah 0,3%. Persentase perolehan DES dengan menggunakan metode pembekuan fraksional adalah 34,6%. Kandungan minyak sawit dalam fase ekstrak adalah 4% w/w dan kandungan DES dalam fase rafinat adalah 0,559% w/w.

Palm oil contains several impurities including free fatty acid that could reduce the quality of the product. The concentration of fatty acid that is safe to be consumed is not more than 0,3% according to SNI. Generally, steam stripping was used to remove fatty acid, however the natural antioxidants were also removed from the palm oil due to their high temperature. Therefore, Deep Eutectic Solvent was innovated as the alternative solvent for the extraction process of free fatty acid in palm oil instead of using conventional solvents that have negative health effects. Several studies have been conducted to remove palmitic acid (as the highest concentration of fatty acid in palm oil) using various HBD and HBA. Besides that, oleic acid also has high concentration, second only to palmitic acid, around 40% of the total fatty acid in palm oil. From this research, DES with the combination of anhydrous betaine with 1,2-Hexanediol with the molar ratio of 1:9 has the highest solubility of oleic acid compared with 1,2-Propanediol, 1,2-Butanediol, and 1,2-Octanediol. The extraction efficiency result is 65% with four stages of extraction in order to obtain the concentration of oleic acid in palm oil below 0,3%. The percentage of the recovery of DES using the fractional freezing method is 34,6%. The palm content in extract phase is 4% w/w and DES content in raffinate phase is 0,559%."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Ayu Tanissa Tamara Putri
"Pada penelitian ini dilakukan sintesis enzimatik ester asam lemak hasil hidrolisis minyak kelapa maupun asam dekanoat dengan gliserol menggunakan pelarut n-heksana dan buffer fosfat 0,05 M pH 8. Dalam reaksi ini digunakan katalis lipase Candida rugosa. Minyak kelapa dihidrolisis menggunakan KOH dalam alkohol dan asam lemak hasil hidrolisis diisolasi dan digunakan untuk reaksi esterifikasi dengan gliserol. Juga dilakukan esterifikasi asam dekanoat dengan gliserol. Perbandingan mmol antara asam lemak dengan gliserol yang digunakan pada reaksi esterifikasi berturut-turut sebesar 1:1, 1:2, 1:3, dan 1:4. Persen konversi tertinggi yang diperoleh pada perbandingan mol 1:4 yaitu 78,5 untuk ester gliserol dekanoat dan 55,4 untuk ester hidrolisat minyak kelapa.
Karakterisasi produk esterifikasi dengan FTIR menunjukkan bahwa ester gliserol asam lemak hasil hidrolisis minyak kelapa maupun asam dekanoat telah berhasil terbentuk, yang ditandai dengan terdapatnya gugus C=O ester pada bilangan gelombang 1750-1739 cm-1. Terhadap produk ester yang dihasilkan dilakukan uji aktivitas antimikroba terhadap bakteri Propionibacterium acnes dan Staphylococcus epidermidis dengan metode difusi cakram.
Hasil uji aktivitas antimikroba kedua sampel ester dan asam lemaknya menunjukkan adanya aktivitas antimikroba dengan diameter hambatan tertinggi sebesar 17 mm pada variasi perbandingan mol 1:4. Dilakukan pula uji emulsifier dengan mencampurkan minyak dan air dalam variasi volume tertentu. Hasil uji emulsifier menunjukkan kedua ester dapat menyatukan minyak dengan air. Kestabilan emulsi yang terbentuk lebih tinggi untuk penggunaan ester gliserol hidrolisat asam lemak minyak kelapa dibandingkan dengan ester gliserol dekanoat.

In this research, enzymatic synthesis of fatty acid esters obtained by hydrolysis of coconut oil and decanoic acid with glycerol using n hexane solvent and phosphate buffer 0,05 M pH 8. In this reaction was used Candida rugosa lipase catalyst. Coconut oil is hydrolyzed using KOH in alcohols and the fatty acid of the hydrolysis product is isolated and used for the esterification reaction with glycerol. The esterification of decanoic acid with glycerol was also carried out. The mmol ratio between fatty acid and glycerol used in the esterification reaction was 1 1, 1 2, 1 3, and 1 4, respectively. The highest conversion percentage obtained at the mole ratio of 1 4 was 78.5 for the glycerol ester and 55.4 for the coconut oil hydrolysate ester.
The characterization of esterification product with FTIR indicates that fatty acid glycerol ester from hydrolyze of coconut oil and decanoic acid has been successfully formed, characterized by the presence of C O ester group at wave number 1750 1739 cm 1. Against the resulting ester product, antimicrobial activity was tested on the bacteria Propionibacterium acnes and Staphylococcus epidermidis by disc diffusion method.
The results of the antimicrobial activity test of both ester and fatty acid samples showed the presence of antimicrobial activity with the highest resistance diameter of 17 mm in the variation of 1 4 mole ratio. There is also an emulsifier test by mixing oil and water in certain volume variations. Emulsifier test results show that both esters can unite oil with water. The higher emulsion stability is higher for the use of ester glycerol hydrolysate fatty acid coconut oil compared to the ester of glycerol decanoic.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2017
S70130
UI - Skripsi Membership  Universitas Indonesia Library
cover
Sihite, Gita W.Y
"Ester glukosa dapat disintesis dari asam lemak minyak kelapa sawit secara enzimatik. Pada penelitian ini digunakan lipase Candida rugosa EC 3.1.1.3 yang terimobilisasi pada partikel nano Fe3O4 termodifikasi surfaktan Tween 80. Partikel nano Fe3O4 disintesis dengan metode kopresipitasi dan dimodifikas idengan Tween 80, kemudian dianalisis menggunakan Fourier Transform Infra Red (FT-IR) dan Field Emission Scanning Electron Microscopy (FESEM). Dilakukan optimasi jumlah enzim, pH, dan waktu inkubasi pada proses imobilisasi enzim lipase pada partikel nano Fe3O4-Tween 80. Didapatkan kondisi optimum imobilisasi, yaitu pada pH 7, waktu inkubasi 5 jam, dan jumlah enzim 2000 ppm dengan aktivitas spesifik 1,60 U/mg, 1,59 U/mg, dan 1,90 U/mg. Uji kualitatif sederhana emulsifier dilakukan terhadap hasil esterifikasi yang menyatakan ester yang dihasilkan merupakan emulsifier dengan persentase konversi sebesar 3,11%.
Hasil pemindaian dengan FESEM menunjukkan ukuran partikel nano Fe3O4-Tween 80 adalah ±163,6 nm. Partikel nano Fe3O4, Fe3O4-Tween 80, dan Fe3O4-Tween 80 terimobilisasi lipase Candida rugosa dikarakterisasi oleh X-ray powder difraction (XRD) dan EDS untuk mengetahui komposisi partikel nano tersebut. Analisis ester menggunakan Fourier Transform Infra Red (FTIR) menunjukkan adanya C-O ester pada bilangan gelombang 1290,42Cm-1dan puncak serapan C=O ester pada bilangan gelombang 1712,85 Cm-1 yang mengindikasikan bahwa hasil reaksi esterifikasi telah terbentuk.

Fatty acid-glucose ester can be synthesized from palm oil fatty acid enzymatically. In this study, immobilized Candida rugosa lipase EC 3.1.1.3 was modified by surfactant Tween 80 and used as catalyst. Fe3O4 nanoparticles were synthesized by coprecipitation method and modified with Tween 80 and then analyzed using Fourier Transform Infra Red ( FT - IR ) and Field Emission Scanning Electron Microscopy (FESEM). Optimization of lipase immobilization was done using various enzyme concentration, pH and incubation time. The optimum condition of immobilization obtained at pH 7, incubation time of 5 hours, and enzyme concentration of 2000 ppm with specific activities 1.60 U/mg, 1.59 U/mg, and 1.90 U/mg respectively. The synthesized product was then examined by simple emulsion test and was proved to be an emulsifier with the percentage conversion value 3,11.
From FESEM analysis showed that Fe3O4- Tween 80 nanoparticles have the particle sized of 163.6 nm. Fe3O4 nanoparticles, Fe3O4-Tween 80, and immobilized Candida rugosa lipase on Fe3O4-Tween 80 were characterized by X-ray powder diffraction (XRD) and EDS to analyze the content of nanoparticles. While characterization using FTIR showed that esterification product exhibit the absorption of C-O ester at 1290,42 cm-1 and the ester carbonyl peak of C=O at 1712.85 cm-1. This peaksthat the product of esterification has been formed.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2014
S53971
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>