Hasil Pencarian  ::  Simpan CSV :: Kembali

"Three types of antimony and bismuth electrolytic cells to be used for lead electrorefining were developed and tested. The electrolytic cell with the bipolar metallic electrode, the electrolytic cell with two anodes and one cathode, and the electrolytic cell with the porous diaphragm were studied. The tests demonstrated that lead is effectively separated from the metallic impurities in all constructions. Grade lead may be obtained at the cathode, and lead-antimony and lead-bismuth alloys may be produced at the anode. The electrolytic cell with a porous diaphragm was found to double the production rate and greatly decrease the electrical potential of the cell as compared to the other two constructions."

"ABSTRAKAntimony (Sb) doped tin oxide (ATO) merupakan salah satu material transparan yang telah mendapatkan popularitas lebih akhir-akhir ini karena sangat berperan penting terhadap teknologi. transparansi tinggi pada cahaya tampak, konsentrasi dan mobilitas elektron tinggi membuat ATO sebagai bahan penting untuk oksida transparan konduktif, display flat-panel, sel surya, jendela arsitektur perangkat optoelektronik dan sensor gas. Dalam penelitian ini, lapisan tipis antimony doped-tin oxide (ATO) dibuat dengan biaya rendah dan sederhana menggunakan metode ultrasonic spray pyrolysis. Lapisan tipis ATO telah ditumbuhkan dengan menvariasikan konsentrasi doping antimon (0%, 1%, 2%, 3% Sb) dan waktu deposisi (10, 20, 30 menit). Sifat struktural, morfologi, optik dan listrik dari lapisan ini telah dianalisis dengan difraksi sinar-X, mikroskop elektron, UV-VIS dan instrumen four point probe. Analisis XRD menunjukkan bahwa semua lapisan polikristalin dengan struktur kristal tetragonal. Analisis sifat optik dan listrik menunjukkan bahwa konsentrasi optimum doping Sb telah diperoleh untuk meningkatkan transparansi danmeningkatkan konduktivitas listrik lapisan tipis timah oksida

---

ABSTRACTAntimony (Sb) doped tin oxide (ATO) is one transparent material that has gained its popularity more recently due to their great technological importance. High transparency in the visible light, high concentration and mobility of electron makes ATO as an important material for the field of transparent conducting oxide, flat-panel display, solar cell, architectural windows optoelectronic devices and gas sensor. In this study, Sb doped-tin oxide (ATO) thin films has been fabricated by low cost and simple, ultrasonic spray pyrolysis method. ATO thin films have been deposited with various antimony doping concentrations (0%, 1%, 2%, 3% Sb) and time deposition(10, 20, 30 minutes). The structural, morphological, optical and electrical properties of these films have been analyzed by X-ray diffraction, scanning electron microscopy, UV-VIS and four point probe instruments. XRD studies show that all films are polycrystalline with tetragonal crystal structure. The optic and electric properties studies show that the concentration optimum of Sb doping has been obtained to increase transparency and improve the electrical conductivity of tin oxide thin film."