Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 157097 dokumen yang sesuai dengan query
cover
Prashanti Amelia Anisa
"Penelitian ini bertujuan untuk mengetahui keekonomian dari proyek Pembangkit Listrik Tenaga Panas Bumi (PLTP) serta untuk mengetahui jalan untuk menjadikan bisnis panas bumi yang berdaya saing tinggi. Daya saing panas bumi terhadap batu bara juga di evaluasi dengan membandingkan biaya produksi listrik dari tiap-tiap pembangkit listrik. Dalam usaha meningkatkan keekonomian dan daya saing panas bumi, dianalisis pengaruh faktor insentif dari pemerintah, pengaplikasian CDM (Clean Development Mechanism) serta penerapan pajak karbon terhadap batu bara.
Hasil penelitian menunjukkan bahwa faktor insentif dari pemerintah, penerapan CDM (Clean Development Mechanism) serta penerapan pajak karbon terhadap batu bara dapat membantu meningkatkan keekonomian dan daya saing panas bumi. Efek dari pembebasan bea masuk impor, pembebasan PPN, penerapan investment tax credit, dan insentif survey awal oleh pemerintah masing-masing dapat menurunkan harga jual listrik panas bumi sebesar $0,75 sen/kWh, $0,91 sen/kWh, $0,23 sen/kWh dan $0,69 sen/kWh.

This study aims to determine the economics of the Geothermal Power Plant project and to investigate ways to make geothermal business more competitive. The ability of geothermal plant to compete with coal is assessed by evaluating and comparing the production cost for each type of power plants. In an effort to improve the economics and competitiveness of geothermal, the influence of incentives from the government, the application of the CDM (Clean Development Mechanism) and the implementation of carbon tax on coal are analyzed.
The results showed that the factor of incentives from the government, implementation of CDM (Clean Development Mechanism) and the implementation of carbon tax on coal could help improve the economics and competitiveness of geothermal energy. The effect of duty free, VAT free, implementation of investment tax credit, and pre survey incentive by the government respectively can decrease the geothermal selling price $0,75 sen/kWh, $0,91 sen/kWh, $0,23 sen/kWh dan $0,69 sen/kWh.
"
Depok: Fakultas Teknik Universitas Indonesia, 2010
S52071
UI - Skripsi Open  Universitas Indonesia Library
cover
Adrian Danar Wibisono
"Total kapasitas terpasang PLTP (Pembangkit Listrik Tenaga Panas Bumi) di Indonesia baru mencapai 1.341 MW, sekitar 4.8% dari seluruh potensi panas bumi yang ada. Salah satu penyebab terbesar masalah tersebut adalah masalah keekonomian dari PLTP. Penelitian ini ingin menemukan cara agar PLTP skala kecil dapat menjadi salah satu alternatif yang diperhitungkan bagi sumber listrik lokal pada tingkat harga yang kompetitif dengan sumber-sumber lain di tingkat konsumen.
Dalam penelitian ini, kapasitas PLTP skala kecil akan divariasikan sebesar 1 MW, 2 MW, 3 MW, 4 MW, dan 5 MW, dengan interval variasi dari suhu uap panas bumi berkisar antara 100°C sampai 340°C dan variasi kecepatan alir (flowrate) uap panas bumi berkisar antara 300 kg/s sampai 1000 kg/s.
Analisis dilakukan dengan melakukan perhitungan Biaya Pokok produksi (BPP) serta penilaian kelayakan investasi pengusahaan PLTP berdasarkan Internal Rate of Return (IRR), Net Present Value (NPV), dan Analisis Sensitivitas atas sumur panas bumi yang sebelumnya dinilai tidak ekonomis oleh satu dan lain sebab.

The total installed capacity of geothermal power plants in Indonesia reached 1,341 MW, approximately 4.8 % of the existing geothermal potential. One of the biggest causes of such problems is economic of electricity from geothermal power plants.
This study wants to find ways to make small-scale geothermal power plants could be an alternative source of electricity that is taken into account for local at a rate competitive with other sources at the consumer level. In this study, small-scale geothermal power plant capacity will be varied at 1 MW, 2 MW, 3 MW, 4 MW and 5 MW. While the interval of variation of temperature geothermal steam 100°C to 340°C ranges. While the range of variation of the flow velocity (flowrate) geothermal steam ranged from 300 kg/s to 1000 kg/s.
The analysis was performed by calculating the cost of electricity production and valuation of investment feasibility is based on the Internal Rate of Return ( IRR ), Net Present Value ( NPV ), and Sensitivity Analysis for marginal geothermal steam well.
"
Depok: Fakultas Teknik Universitas Indonesia, 2014
S55176
UI - Skripsi Membership  Universitas Indonesia Library
cover
Anatasya Shalsabilla
"Produksi amonia hijau dengan green hydrogen—elektrolisis air—dapat mempercepat penurunan emisi karbon sampai dengan 41% dari total produksi amonia global pada 2050. Namun, perbedaan penurunan nilai emisi berbagai skema sistem produksi dan rendahnya biaya produksi amonia hijau terhadap fossil-based ammonia mendorong penelitian aspek teknis sistem produksi amonia hijau dilakukan sebagai dasar analisis aspek lingkungan dan ekonomi dari variasi penggunaan sumber energi sistem produksi amonia hijau. Variasi sistem ditinjau dari tiga jenis sumber energi terbarukan, yaitu photovoltaic (PV)-baterai, pembangkit listrik tenaga panas bumi (PLTP), dan pembangkit listrik tenaga air (PLTA), sedangkan sistem secara keseluruhan terdiri atas unit elektrolisis air dengan teknologi alkaline electrolyser (AEL), unit separasi udara dengan metode distilasi kriogenik, dan unit sintesis amonia hijau dengan metode Haber-Bosch. Analisis aspek teknis dilakukan dengan simulasi proses ASPEN Plus, aspek lingkungan dengan metode life cycle assessment (LCA) serta ruang lingkup cradle-to-gate, dan aspek ekonomi dengan metode levelized cost untuk mendapatkan efisiensi energi sistem, nilai emisi CO2eq, dan levelized cost of ammonia (LCOA). Hasil penelitian menunjukkan bahwa efisiensi energi sistem pada konfigurasi sistem PLTA-AEL sebesar 39,16%, lebih tinggi secara signifikan dibandingkan PLTP-AEL (8,45%) dan PV-AEL (6,71%). Tinjauan aspek lingkungan menunjukkan bahwa PLTA-AEL dinilai paling menguntungkan dengan nilai emisi 0,84 kg CO2eq/kg NH3, diikuti oleh PLTP-AEL dan PV-AEL sebesar 0,87 kg CO2eq/kg NH3 dan 1,14 kg CO2eq/kg NH3 secara berurutan. Di sisi lain, PLTP-AEL menempati posisi teratas dari tinjauan aspek ekonomi dengan nilai LCOA 1.130 USD/ton NH3, diikuti oleh PLTP-AEL sebesar 1.179 USD/ton NH3 dan PV-AEL sebesar 1.356 USD/ton NH3. Aspek ekonomi pada ketiga konfigurasi sistem tersebut, yang belum mampu bersaing dengan grey ammonia, menjadi trade off atas keunggulan aspek lingkungan yang ditawarkan.

The production of green ammonia with green hydrogen—from water electrolysis— has the potential to accelerate the reduction of carbon emissions by up to 41% of the total global ammonia production by 2050. However, the differences in emission reduction values from various production system schemes and lower green ammonia production cost compared to fossil-based ammonia drive the research of technical aspects of green ammonia production systems. This serves as the basis for analyzing the environmental and economic aspects of the variations in energy sources used in green ammonia production systems. The variations in the system involve three types of renewable energy sources, namely photovoltaic (PV)-battery, geothermal power plant, and hydropower plant, while the overall system consists of an electrolysis unit using alkaline electrolyser technology (AEL), an air separation unit using cryogenic distillation methods, and a green ammonia synthesis unit using the Haber-Bosch method. Technical aspects are analyzed through process simulations using ASPEN Plus, environmental aspects through life cycle assessment (LCA) method with a cradle to gate scope, and economic aspects through the levelized cost method so the system energy efficiency, CO2eq emission values, and the levelized cost of ammonia (LCOA) can be obtained. The research results indicate that the overall system energy efficiency of the PLTA-AEL system configuration is 39.16%, significantly higher compared to PLTP-AEL (8.45%) and PV-AEL (6.71%). From an environmental point of view, PLTA-AEL is considered the most advantageous with an emission value of 0.84 kg CO2eq/kg NH3, followed by PLTP-AEL and PV-AEL with 0.87 kg CO2eq/kg NH3 and 1.14 kg CO2eq/kg NH3, respectively. On the other hand, PLTPAEL ranks highest from an economic point of view with an LCOA value of 1,130 USD/ton NH3, followed by PLTP-AEL at 1,179 USD/ton NH3 and PV-AEL at 1,356 USD/ton NH3. The economic aspects of the three system configurations, which are not yet able to compete with grey ammonia, become a trade-off against the environmental advantages they offer."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Noval Suryadi
"

Dalam rangka upaya memenuhi target  bauran energi baru terbarukan terkait kapasitas terpasang Pembangkit Listrik Panas Bumi (PLTP) pada tahun 2025 sebesar 7.200 MW, dengan potensi sumber daya panas bumi sebesar 23.060 MW baru sebesar 2.360 MW yang dimanfaatkan menjadi Pembangkit Listrik Tenaga Panas Bumi (PLTP). Pada Wilayah Kerja Panas Bumi “XYZ” terdapat potensi cadangan panas bumi 464 MW, namun baru dimanfaatkan menjadi Pembangkit Listrik Panas Bumi sebesar 55 MW (12%). Untuk meningkatkan kapasitas pembangkit pada Wilayah Kerja Panas Bumi “XYZ” yang telah beroperasi dapat menurunkan tingkat risiko sumber daya panas bumi, menekan biaya investasi awal dan mengurangi waktu pembangunan pembangkit karena proses pengembangan panas bumi tidak dimulai dari tahap awal. Tujuan penelitian ini adalah untuk mengevaluasi dan menganalisis  dalam investasi pengembangan kapasitas pembangkit listrik panas bumi menggunakan Simulasi Monte Carlo dalam pengambilan keputusan, dengan memperhitungkan variabel-variabel ketidakpastian seperti faktor kapasitas, tingkat suku bunga, inflasi, pajak, proporsi pembiayaan ekuitas, dan jangka waktu pembangunan. Hasil analisis  menunjukkan bahwa skema investasi pengembangan kapasitas pembangkit dengan cara memaksimalkan cadangan panas bumi menghasilkan  peningkatan probabilitas Net Present Value bernilai positive.


In order to meet the renewable energy mix target related to the installed capacity of Geothermal Power Plants (PLTP) in 2025 of 7,200 MW, with the potential of geothermal resources of 23,060 MW, only 2,360 MW has been utilised as a Geothermal Power Plant. In the Geothermal Working Area "XYZ" there are potential geothermal reserves of 464 MW, but only 55 MW (12%) has been utilised as a Geothermal Power Plant. To increase the generating capacity in the "XYZ" Geothermal Working Area that has been operating can reduce the risk level of geothermal resources, reduce initial investment costs and reduce plant construction time because the geothermal development process does not start from the initial stage. The purpose of this study is to evaluate and analyse the investment in geothermal power plant capacity development using Monte Carlo Simulation in decision making, by taking into account uncertain variables such as capacity factor, interest rate, inflation, tax, proportion of equity financing, and construction period. The results of the analysis show that the investment scheme for developing generating capacity by maximising geothermal reserves results in an increase in the probability of a positive Net Present Value.

"
Depok: Fakultas Teknik Universitas Indonesia, 2023
T-pdf
UI - Tesis Membership  Universitas Indonesia Library
cover
Arief Surachman
"Dalam rangka upaya memenuhi target pemerintah yaitu pengembangan pembangkit listrik tenaga panas bumi PLTP pada tahun 2025 ditargetkan sebesar 7.242 MW, maka tentu saja akan diperlukan data tentang desain PLTP yang paling optimal yang dapat diterapkan pada seluruh kondisi sumber panas bumi. Dengan demikian, diperlukan panduan desain yang dibuktikan secara ilmiah untuk pembangunan PLTP. Dalam dekade terakhir ini, banyak peneliti yang menganalis atau merancang sistem energi dengan menggabungkan antara analisis energi, exergy dan thermoekonomik. Hal ini dimaksudkan dalam upaya peningkatan efisiensi serta mengurangi kerugian-kerugian yang ditimbulkan oleh ketidakefisienan sistem.
Melalui analisa yang komprehensif dengan menggabungkan analisa energi, exergy, exergoeconomics serta exergoenvironment, maka diharapkan dapat menjadi panduan desain yang paling optimum dengan mempertimbangkan segala aspek, baik aspek teknologi, ekonomi dan lingkungan yang dapat diaplikasikan untuk berbagai kondisi sumber panas bumi di Indonesia. Untuk itulah pada disertasi ini dilakukan analisa dan optimasi 3E exergy,economic,environment. Pemodelan dan optimasi sistem PLTP dilakukan menggunakan software EES dan diintegrasikan dengan MATLAB.
Dari hasil analisis 3E, dapat diketahui bahwa komponen seperti turbin dan cooling tower merupakan komponen yang menyumbang nilai exergy destruction, total cost dan exergoenvironment yang paling besar dibandingkan komponen lainnya.

In order to reach the government 39;s target of building geothermal power plant PLTP in 2025 of 7,242 MW, then it will need data about the most optimal PLTP design that can be applied to all geothermal conditions. Thus, the design required for the construction of PLTP. In the last decade, many researchers have analyzed and discussed energy systems with energy, exergy and thermoeconomic analyzes. This is necessary in an effort to increase and reduce the losses caused by system inefficiencies.
Through a comprehensive analysis with energy analysis, exergy, exergoeconomics and exergoenvironment, it is expected to be the most optimal design with good aspects, economics and environment that can be used for various geothermal conditions in Indonesia. For analysis, it was conducted 3E exergy, economy, environment analysis on this dissertation. By using EES software and integrated with MATLAB, the PLTP system can be modeled and optimized.
From the results of 3E analysis, it can be seen that components such as turbines and cooling towers are the components that contribute the largest value of total exergy destruction, total cost and exergoenvironment compared to other components.
"
Depok: Fakultas Teknik Universitas Indonesia, 2018
D2483
UI - Disertasi Membership  Universitas Indonesia Library
cover
Alif Nuzulul Hidayat
"PLTP memiliki potensi berupa limbah panas yang masih terkandung dalam kondensat atau brine yang biasanya diinjeksikan kembali ke dalam bumi melalui sumur reinjeksi. Dalam penelitian ini dilakukan analisis tekno-ekonomi terhadap pemanfaatan potensi limbah panas PLTP Kamojang untuk proses penyulingan minyak akar wangi yang terletak di Kabupaten Garut. Berdasarkan hasil penelitian diketahui bahwa secara teknis kondensat PLTP Kamojang dapat dimanfaatkan untuk penyulingan akar wangi. Namun, akan lebih efektif apabila dapat ditemukan sumur yang mengandung brine. Total biaya kapital dan operasional yang dibutuhkan untuk skema brine secara berturut-turut adalah Rp42.727.999.500 dan Rp549.801.000, sedangkan untuk skema kondensat adalah Rp28.382.845.500 dan Rp420.174.000.
Secara ekonomi, penggunaan kondensat tidak layak untuk penyulingan minyak akar wangi. Skema pemanfaatan limbah panas bumi untuk penyulingan minyak akar wangi yang paling menguntungkan adalah menggunakan brine pada jarak maksimal 1 km dari sumber panas serta didanai 70% dari hibah dan 30% dari pemerintah dengan NPV Rp 1.057.899.500, IRR 10,16% dan PBP pada tahun ke-8. Emisi gas CO2 yang dapat dihindari dari penggunaan brine untuk proses penyulingan minyak akar wangi adalah sebanyak 213,5 ton CO2/tahun.

Geothermal power plant potential in the form of waste heat which is still contained in the condensate or brine is usually injected back into the earth through reinjection wells. In this research, techno-economic analysis of waste heat utilization from geothermal power flant for vetiver oil production located in Garut is conducted. The result of this research revealed that condensate of Kamojang geothermal power plant technically can be used to supply heat for vetiver oil production. However, it would be more effective if wells that contain brine can be found. Total of capital and operating costs required for the brine scheme are Rp42.727.999.500 and Rp549.801.000, while the condensate scheme are Rp28.382.845.500 and Rp420.174.000, respectively.
Economically, the use of condensate is not feasible for the vetiver oil production. The most profitable scheme of geothermal waste heat utilization for vetiver oil production is to use brine at a maximum distance of 1 km from the source of heat and funded 70% of grant & 30% of government with NPV Rp1.057.899.500, IRR 10,16% and PBP on the 8th year. CO2 Emissions can be avoided from the use of brine for vetiver oil production is as much as 213,5 tonnes of CO2/year.
"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S63994
UI - Skripsi Membership  Universitas Indonesia Library
cover
Irpan Friyadi
"ABSTRAK
Indonesia merupakan negara dengan cadangan panas bumi terbesar di dunia dan menempati peringkat ketiga dalam hal kapasitas pembangkit listrik tenaga panas bumi. Pembangkit listrik tenaga panas bumi masih menyisakan limbah panas sebagai aliran yang akan diinjeksikan kembali ke dalam reservoir. Di sisi lain, Indonesia juga merupakan negara dengan kapasitas produksi teh terbesar kelima di dunia. Dalam proses pengolahannya, teh membutuhkan panas yang digunakan untuk mengeringkan daun teh menjadi produk teh yang siap jual. Penelitian ini bertujuan untuk menganalisis secara teknis maupun ekonomian kelayakan dari limbah panas pembangkit listrik menjadi sumber panas dalam proses pengeringan teh. Dengan menggunakan limbah panas, laju konsumsi energi yang dibutuhkan menjadi 1,5 kW per kg teh. Selain itu, biaya energi penggunaan limbah panas ini Rp. 0,026/kJ, lebih murah dari energi konvensional lain untuk pengeringan teh. Dari segi finansial, investasi ini juga layak dengan nilai NPV sebesar Rp. 6.163.840.000,- dan IRR 10,23%. Skema ko-finansial dibutuhkan untuk membuat investasi ini menguntungkan secara ekonomi.

ABSTRAK
Indonesia is the country with the largest geothermal reserves in the world and puts Indonesia as the third-ranked in terms of the capacity of geothermal power plants. Geothermal power plants still leave waste heat as a stream that will be injected back into the reservoir. The waste heat can still be used directly for various applications. On the other hand, Indonesia is also a country with the fifth largest tea production capacity in the world. In the treatment process, the tea requires heat which used to dry the tea leaves into tea products are ready to sell. This study aimed to analyze the technical and economic feasibility of geothermal power plant waste heat becomes a source of heat in the drying process of tea. By using waste heat, the rate energy consume is 1,5 kW/kg of tea. In addition, the energy price is Rp. 0,026/kJ, cheaper than other conventional energy for tea drying. In financial terms, this investment is also feasible with NPV Rp. 6.163.840.000,- dan IRR 10,23%. Cofinancing scheme needed to make this investment economically profitable.
"
2016
S63652
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fahmi Firdaus Angkasa
"Pada tahun 2025 pemerintah menargetkan peran energi baru terbarukan (EBT) minimal 23% dari bauran energi nasional ketenagalistrikan. Salah satu jenis EBT adalah panas bumi yang menjadi salah satu potensi yang besar. Berdasakan data Kementiran ESDM, potensi energi panas bumi sebesar 28.579 MWe yang terdiri dari sumber daya sebesar 11.073 MWe dan cadangan sebesar 17.506 MWe. Selain itu berdasarkan RUPTL 2019-2028, komposisi bauran energi listrik regional Sumatera akan mencapai 38,5% bersumber EBT atau mencapai total 2647,1 MW yang terdiri dari air sebesar 20,1%, panas bumi sebesar 19,5%, dan sumber EBT lainnya sebesar 1,9%. Pada tahun 2019-2023, terdapat Pembangkit Listrik Tenaga Panas Bumi (PLTP) yang direncanakan akan memasuki sistem interkoneksi Sumatera Utara pada dengan total kapasitas 240 MW. Oleh karena itu, studi interkoneksi dibutuhkan untuk mengetahui efek dari pembangkit terhadap jaringan interkoneksi dan kesesuaian dengan standar yang ada. Studi interkoneksi yang dilakukan terdiri dari studi aliran daya, studi stabilitas sistem tenaga listrik, dan studi hubung singkat menggunakan perangkat lunak DIgSILENT Power Factory 2019 SP 4. Hasil dari studi aliran daya menunjukan level tegangan pada pembangkit dan dua Gardu Induk (GI) terdekat sesuai dengan aturan yang berlaku pada Aturan Jaringan Sistem Tenaga Listrik Sumatera 2007 2.1.b yang menyebutkan standar tegangan pada jaringan interkoneksi 150 kV harus selalu diantara 135 kV dan 165 kV (±10% tegangan nominal). Selain itu, stabilitas sistem tenaga listrik dilihat dari parameter tegangan, frekuensi dan sudut rotor. Jaringan interkoneksi tetap stabil ketika ada gangguan di salah satu generator pembangkit, gangguan di satu atau dua saluran antara pembangkit dan GI terdekat, dan pelepasan beban di salah satu GI. Ketidakstabilan terjadi ketika dua GI terdekat terisolasi dengan jaringan interkoneksi Sumatera yang menghasilkan pemadaman total. Sementara itu, penambahan kapasitas pembangkit pada sistem interkoneksi 150 kV Sumatera Utara menyebabkan nilai arus hubung singkat di GI meningkat. Seluruh nilai arus hubung singkat masih memenuhi standar IEEE Std C37.06-2009.

In 2025 the government is targeting the renewable energy at least 23% of the national electricity energy mix. One type of renewable energy is geothermal which has a great potential. Based on the Ministry of Energy and Mineral Resources Republic of Indonesia data, the potential for geothermal energy is 28,579 MWe consisting of resources 11,073 MWe and reserves 17,506 MWe. Further based on 2019-2028 RUPTL, the composition of Sumatra's regional electric energy mix will reach 38.5% from renewable sources or reach a total of 2647.1 MW consisting of water 20.1%r, geothermal 19.5%, and other renewable sources by 1.9%. In 2019-2023, there is a Geothermal Power Plant which is planned to enter the North Sumatra interconnection system with a total capacity of 240 MW. Therefore, an interconnection study is needed to determine the effect of the new power plant on the interconnection grid and compliance with the standards. Interconnection studies carried out consist of power flow, stability, and short circuit study using the DIgSILENT Power Factory 2019 SP 4 software. The results of the power flow study show that the voltage level at the power plant and the two closest substations is in accordance with the Grid code Electricity System Power System 2007 2.1.b which states the voltage standard on the 150 kV interconnection grid must always be between 135 kV and 165 kV (± 10% nominal voltage). In addition, the stability of the electric power system can be seen from the voltage, frequency and rotor angle parameters. The grid remains stable when there is a disturbance in one of the power plant generators, disturbance in one or two cables between power plant and the nearest substation, and the release of load in one of the substations. Instability occurs when it is isolated with the Sumatra interconnection grid which results in total blackouts. Meanwhile, the addition of generating capacity through PLTP in the 150 kV North Sumatra interconnection system causes the value of short circuit current in substations increase. All short circuit current still meets IEEE Std C37.06-2009 standard."
Depok: Fakultas Teknik Universitas Indonesia, 2020
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Muhammad Perdana Surya
"

Abstrak

 

Nusa Tenggara adalah termasuk wilayah Indonesia bagian tengah dengan dua provinsi yang memiliki rasio elektrifikasi dibawah 90%. Akhir tahun 2017 rasio elektrifikasi daerah Nusa Tenggara Barat, dan Nusa Tenggara Timur adalah 84,11% dan 60,82%. Pembangunan pembangkit listrik tenaga gas bumi akan dilakukan oleh pemerintah di wilayah nusa tenggara. Suplai gas bumi yang dibutuhkan oleh pembangkit di Nusa Tenggara akan dilakukan dalam bentuk LNG atau liquefied natural gas. Asumsi yang digunakan adalah suplai diberikan oleh Badak LNG dan Tangguh LNG. Permintaan Listrik yang tidak tinggi sehingga volume LNG yang ditransportasikan relatif kecil, dapat dikategorikan sebagai Small Scale LNG (SSLNG). Penelitian ini akan memberikan analisis keekonomian yang dilakukan dari setiap skema distribusi SSLNG yang direncanakan hingga diperoleh harga jual LNG di tempat penerimaan. Metode distribusi yang diteliti adalah milk run, hub spoke, dan gabungan keduanya akan dibuat kedalam 10 skenario. Metode terbaik yang digunakan adalah metode milk run dengan dua kluster, dengan LNG disupplai dari Badak LNG yang memiliki harga $13,12/MMBTU sebagai plant gate price dengan permintaan 12,010,942.87MMBTU/Tahun.

 

Kata kunci: Distribusi LNG, LNG Skala Kecil, Rantai Suplai LNG, harga jual LNG, Nusa Tenggara.

 


Abstract

 

Nusa Tenggara is in the central part of Indonesia with two provinces which have electrification ratio below 90%. Electrification ratio of the West Nusa Tenggara and East Nusa Tenggara regions was 84.11% and 60.82%. Construction of a natural gas power plant will be carried out by the government in Nusa Tenggara region. Supply of natural gas needed by the plant in Nusa Tenggara will be carried out in the form of LNG or liquefied natural gas. assuming the supply is provided by Badak LNG and Tangguh LNG. Because electricity demand is low, so the volume of LNG transported is relatively small and categorized as Small-Scale LNG (SSLNG). This study will provide economic analysis carried out from each SSLNG distribution scheme planned to obtain LNG selling prices at the receiving place (plant gate price). Distribution methods used for study are milk run, hub spoke, and combination of those two methods. uses milk run methodology with two clusters for the Nusa Tenggara region. Based on the feasibility study conducted, demand for Nusa Tenggara overall is 12,010,943 MMBTU/Year. The LNG will be supplied from Badak LNG in Bontang with $13.12/MMBTU as Plant Gate Price.

 

Key word: LNG Distribution, Small Scale LNG, LNG Supply Chain, Plant Gate Price, Nusa Tenggara.

 

"
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Panjaitan, Mangasi Natanael
"Potensi geotermal Indonesia mencapai sekitar 28,1 GWe, dan sebagian besar terdapat di Sumatra. Akan tetapi, kondisi infrastruktur saluran transmisi di Sumatra yang belum memadai tidak memungkinkan pemanfaatkan PLTP demi penyediaan listrik penduduk. Lalu, Peraturan Pemerintah nomor 1 tahun 2014 tentang Pelaksanaan Kegiatan Pertambangan Mineral dan Batubara (minerba) menuntut pembangunan smelter (suatu industri dengan konsumsi energi yang sangat besar) harus segera terealisasikan. Melihat keadaan ini, potensi geotermal dapat dimanfaatkan sebagai salah satu alternatif untuk memenuhi kebutuhan energi industri smelter, yakni dengan membangun PLTP yang terintegrasi langsung dengan smelter. Jenis smelter yang paling cocok adalah smelter aluminium karena jenis smelter tersebut dominan menggunakan proses elektrolisis. Tetapi selama proses, terdapat losses yang mempengaruhi efisiensi masing-masing sistem. Suatu analisis diperlukan untuk mengidentifikasi posisi-posisi dan alasan terbentuknya losses tersebut. Metode yang digunakan untuk menganalisis kedua sistem PLTP dan Smelter pada penelitian ini adalah metode analisis energi dan eksergi berdasarkan pada Hukum Termodinamika I dan II. Tujuan dari penelitian ini adalah mendapatkan hasil perhitungan energi dan eksergi untuk mengetahui efisiensi smelter dan pembangkit siklus single-flash sehingga selanjutnya dapat dianalisis untuk merekomendasikan perbaikan sistem agar efisiensi termal PLTP sebagai pemasok listrik dan efisiensi eksergi dari sistem smelter Aluminium dapat meningkat. Hasil penelitian menunjukkan bahwa Siklus geotermal Single-flash memiliki efisiensi eksergi sebesar 31%, dengan exergy losses terbesar terjadi pada kondensor (233.58 MJ) dan reinjeksi brine (176.85 MJ) dan Smelter Aluminium memiliki efisiensi sebesar 18.45%, dengan exergy losses terbesar terjadi pada Digester (35.69 MJ), Rotary kiln (31.05 MJ), dan elektrolisis cell (79.25 MJ).

The geothermal energy potential in Indonesia is around 28.1 GWe, where a large portion of it is in Sumatra. However, since the transmission line infrastructure in Sumatra isn?t capable to transfer this energy, utilization to provide electricity for the citizen is not possible. On the other hand, PP No.1 of year 2014, regarding Minerals and Coals Mining, demands smelter industries (industries with a massive amount of energy consumption) to be immediately built in Indonesia. Considering this situation, the geothermal energy potential can be used as an alternative to provide the need of energy of smelter industries, by building a geothermal power plant which is integrated with the smelter. An aluminum smelter is most suitable because it mainly uses electrolysis process. However, during the process, some losses occurs in each system. An analysis is needed to indentify the location where these losses occurs and their explanation. The method used to analyze both systems is an energy and exergy analysis based on First and Second Law of Thermodynamics. The purpose of this research is to obtain the calculation of energy and exergy to find out the efficiency of both smelter and single-flash cycle power plant, so it can be analyzed to give recommendations that can fix the model of single-flash cycle geothermal power plant and aluminum smelter to increase their thermal efficiency and performance. The result of this research shows that Single-flash cycle Geothermal Plant has an exergy efficiency of 31%, with largest exergy losses occurring at condenser(233.58 MJ) and brine reinjection (176.85 MJ) and Aluminum Smelter has an exergy efficiency of 18.45%, with largest exergy losses occurring at Digester (35.69 MJ), Rotary kiln (31.05 MJ), and electrolysis cell (79.25 MJ)"
Depok: Fakultas Teknik Universitas Indonesia, 2016
S61962
UI - Skripsi Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>