Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 173119 dokumen yang sesuai dengan query
cover
Santi
"[ ABSTRAK
Dalam penelitian ini, silika macro-sphere berpori disintesis dengan metode sol-gel dengan katalis asam. Na2SiO3 digunakan sebagai prekursor silika, surfaktan Oleil Bis(2-HidroksiEtil) Amin digunakan sebagai template pori, dan HCl digunakan sebagai katalis asam. Silika macro-sphere berpori terbentuk melalui tahapan : hidrolisis, kondensasi, aging, pengeringan, dan kalsinasi pada suhu 300oC, yang dilanjutkan dengan impregnasi dengan CuS sebagai bahan aktif. Karakterisasi dengan XRD dan EDS terhadap silika macro-sphere berpori terimpregnasi CuS menunjukkan masuknya bahan aktif ke dalam silika macro-sphere berpori. Silika macro-sphere berpori terimpregnasi CuS digunakan sebagai adsorben uap merkuri. Reaksi adsorpsi dilakukan dengan menggunakan rangkaian sistem tertutup yang terbuat dari peralatan gelas. Adsorpsi menunjukkan hasil yang baik terhadap senyawa merkuri maupun unsur merkuri yang didasarkan pada perbedaan massa adsorben sebelum dan setelah proses adsorpsi. Adsorpsi terjadi sebagai adsorbsi kimia dan adsorpsi fisik. Nilai adsorpsi fisik yang diperoleh adalah sebesar 5,316 mg HgCl2 per gram adsorben dan 0,196 mg Hg per gram adsorben. Nilai adsorpsi kimia yang diperoleh adalah sebesar 31,363 mg HgCl2 per gram adsorben dan 23,743 mg Hg per gram adsorben.
ABSTRACT In this research, porous silica macro-sphere was synthesized by acid catalyzed sol-gel method. Na2SiO3 was used as silica precursor, meanwhile surfactant Oleyl Bis(2-HydroxyEthyl) Amine was used as the template pores, and HCl was used as the catalyst. This porous silica macro-sphere was formed through the following steps: hydrolysis, condensation, aging, drying and calcination at 300oC, followed by impregnation by CuS as an active support. The characterization of CuS impregnated porous silica macro-sphere by XRD and EDS showed that CuS was successfully impregnated into porous silica macro-sphere. The CuS impregnated porous silica macro-sphere was used as mercury vapor adsorbent. The adsorption was performed using a closed system made of glassware. Its adsorption showed a good result, either in the form of a mercury compound or mercury element, based on the different weight of adsorbents before and after the adsorption processes. These adsorption occured as chemical adsorption and physical adsorption. The obtained physical adsorption values were 5.316 mg HgCl2 per gram adsorbent and 0.196 mg Hg per gram adsorbent, and its chemical adsorptions were 31.363 mg HgCl2 adsorption per gram adsorbent and 23.743 mg Hg adsorption per gram adsorbent., In this research, porous silica macro-sphere was synthesized by acid catalyzed sol-gel method. Na2SiO3 was used as silica precursor, meanwhile surfactant Oleyl Bis(2-HydroxyEthyl) Amine was used as the template pores, and HCl was used as the catalyst. This porous silica macro-sphere was formed through the following steps: hydrolysis, condensation, aging, drying and calcination at 300oC, followed by impregnation by CuS as an active support. The characterization of CuS impregnated porous silica macro-sphere by XRD and EDS showed that CuS was successfully impregnated into porous silica macro-sphere. The CuS impregnated porous silica macro-sphere was used as mercury vapor adsorbent. The adsorption was performed using a closed system made of glassware. Its adsorption showed a good result, either in the form of a mercury compound or mercury element, based on the different weight of adsorbents before and after the adsorption processes. These adsorption occured as chemical adsorption and physical adsorption. The obtained physical adsorption values were 5.316 mg HgCl2 per gram adsorbent and 0.196 mg Hg per gram adsorbent, and its chemical adsorptions were 31.363 mg HgCl2 adsorption per gram adsorbent and 23.743 mg Hg adsorption per gram adsorbent.]"
Depok: Universitas Indonesia, 2014
S58433
UI - Skripsi Membership  Universitas Indonesia Library
cover
Annisa Kartika
"Studi pengkelatan ion logam lantanida oleh ligan pendonor nitrogen sebagai fluorosensor sudah berkembang pesat saat ini terutama dalam bidang kesehatan. Pada penelitian ini ion logam lantanida yang diaplikasikan adalah ion logam Dy3+ dan Pr3+ sedangkan ligan yang akan mengkelat ion-ion logam tersebut adalah ligan turunan pirazol dan merupakan ligan bidentat, yaitu 2-(1,5- difenil-4,5-dihidro-1H-pirazolin-3-yl)Piridin. Sintesis ligan tersebut dilakukan dengan dua tahap, yaitu kondensasi Claisen-Schmidt dan reaksi penambahan fenil hidrazin berlebih. Karakterisasi senyawa ligan yang disintesis menggunakan instrumentasi spektrokopi FTIR, NMR, dan spektrofotometri UV-Vis.
Penelitian ini bertujuan untuk menganalisis pengaruh konsentrasi ion logam Dy3+ dan Pr3+ terhadap intensitas fluorosens senyawa kompleksnya, [DyLn]3+ dan [PrLn]3+. Serta mempelajari keselektivitasan ligan tersebut terhadap ion logam Dy3+ dan Pr3+.Variasi konsentrasi ion logam yang digunakan untuk uji sensitifitas adalah 20, 40, 80, 120, 160, 200, 240, 280, 320, 360, 400 mikroMolar dengan ligan berkonsentrasi tetap, 400 mikroMolar. Hasil dari uji sensitifitas adalah seiring dengan penambahan konsentrasi ion logam Dy3+ dan Pr3+ pada masing-masing kompleks, [DyLn]3+ dan [PrLn]3+, maka terjadi penurunan intensitas emisi fluorosensinya pada masing-masing panjang gelombang emisi maksimum kompleks, yaitu 470 nm dan 428,5 nm. Uji selektivitas menunjukkan bahwa ligan 2-(1,5- difenil-4,5-dihidro-1H-pirazolin-3-yl)Piridin lebih selektif atau lebih senang mengkelat ion logam Pr3+ menjadi kompleks kelat [PrLn]3+ daripada ion logam Dy3+. Hal ini terbukti dengan lebih besarnya intensitas emisi kompleks [PrLn]3+sebesar 2,795 daripada intensitas emisi kompleks [DyLn]3+ sebesar 2,455, pada panjang gelombang emisi maksimum masing-masing kompleksnya.

Study of lanthanide metal ions chelate by the nitrogen donor ligands as fluorosensor has been growing rapidly at this time, especially in the health field. In this study, lanthanide metal ion which is applied to the metal ion Dy3+ and Pr3+ while going chelate ligands of the metal ions are pyrazole derived ligands and a bidentate ligand, which is 2- (1,5-diphenyl-4,5-dihydro-1H -pirazolin-3-yl) Pyridine. The ligand synthesis is done in two stages, namely the Claisen-Schmidt condensation and excessive reaction to the addition of phenyl hydrazine. Characterization of compounds synthesized ligands using spectroscopic instrumentation FTIR, NMR, and UV-Vis spectrophotometry.
This study aimed to analyze the effect of the concentration of metal ions Dy3+ and Pr3+ to the intensity of the fluorescent compound of the complex, [DyLn]3+ and [PrLn]3+. As well as learn selectivity the ligand to the metal ion Dy3+ and Pr3+.Variety concentration of metal ions are used to test the sensitivity was 20, 40, 80, 120, 160, 200, 240, 280, 320, 360, 400 micromolar ligand concentration fixed, 400 micromolar. Results of the test of sensitivity is due to the addition of the metal ion concentration Dy3+ and Pr3+in each complex, [DyLn]3+ and [PrLn]3+,then a decline in them emissions intensity fluorosennce at each wavelength of maximum emission complex, which is 470 nm and 428.5 nm. Selectivity test indicates that the ligand 2- (1,5-diphenyl-4,5-dihydro-1H-pirazolin-3-yl) Pyridine more selective or prefer to chelate metal ionsPr3+ into a chelate complex [PrLn]3+ than metal ions Dy3+, This proved to be the magnitude of the value emission intensity of [PrLn]3+ complex and the value is 2,795 than the emission intensity [DyLn]3+and the value is 2,455, the maximum emission wavelength of each complex.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
S64379
UI - Skripsi Membership  Universitas Indonesia Library
cover
Endang Asijati Widijaningsih Ichsan
Depok: UI-Press, 2008
PGB 0009
UI - Pidato  Universitas Indonesia Library
cover
Bayu Ardiansah
"Katalis heterogen natrium terimpregnasi pada cangkang telur (Na-ACE) telah berhasil disintesis dengan metode impregnasi basah menggunakan larutan NaOH pada padatan pendukung cangkang telur ayam teraktivasi. Setelah dilakukan karakterisasi material menggunakan beberapa instrumentasi seperti EDAX, FTIR, XRD, BET, FESEM, TGA dan total kebasaan, katalis Na-ACE kemudian digunakan pada reaksi kondensasi Aldol untuk menghasilkan senyawa chalcone 3a ? 3l. Reaksi dapat dijalankan dalam waktu yang relatif singkat dengan etanol absolut sebagai pelarut terbaik yang akan menghasilkan senyawa chalcone sebanyak 97% yield. Katalis Na-ACE dapat digunakan sampai 5 kali pengulangan reaksi dengan recovery yang baik, namun disertai kehilangan sebagian aktivitas katalitiknya. Lebih lanjut, pada uji aktivitas antiradikal bebas metode DPPH untuk senyawa 3h, menunjukkan aktivitas yang moderat, sekitar 51% radikal dapat dinetralkan dengan menambahkan 125 ppm larutan etanolik 3h.

We reported a simple preparation of sodium impregnated on activated chicken eggshells (Na-ACE) as solid catalyst for environmentally benign chalcones synthesis. After material characterization using EDAX, FTIR, XRD, BET, FESEM, TGA and total basicity, the catalyst was then applied in Aldol condensation to produce corresponding substituted chalcones 3a ? 3l. Reaction can be conducted in relative short time with ethanol absolute as the best solvent and gave the highest yield of 97%. The Na-ACE was used 5 times in the same reaction procedure, and can be highly recovered with partial loss of catalytic performance. Furthermore, in radical scavenging assay using DPPH, compound 3h showed a moderate activity, at approximately 51% DPPH radical can be scavenged using 125 ppm ethanolic solution of 3h."
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2016
T45130
UI - Tesis Membership  Universitas Indonesia Library
cover
cover
Ghaathy Najuda
"Fibrosis merupakan penyakit yang belum banyak diketahui namun perkembangan penyakit ini cukup mengkhawatirkan. Pengobatan untuk fibrosis kolon akan lebih efektif jika obat dilepaskan langsung ke tempat peradangan. Tetrandrine memiliki efek antifibrosis. Penelitian ini bertujuan untuk memformulasikan tetrandrine ke dalam beads kalsium-alginat tersalut Eudragit L100-55 atau L100 sebagai sediaan kolon tertarget. Tetrandrine diformulasikan ke dalam natrium alginat karena memiliki daya mengembang yang baik pada pH kolon dan dapat membentuk sambung silang dengan CaCl2. Pembuatan beads dilakukan dengan metode gelasi ionik. Formula dengan rasio natrium alginat dan CaCl2 2:3 (formula 2) menghasilkan efisiensi penjerapan yang paling optimal sebesar 82,460 ± 2,728%. Setelah penyalutan, formula dengan Eudragit L100 10% (formula c) merupakan formula terbaik karena dapat menahan pelepasan tetrandrine dalam HCl 0,1 N pH 1,2 (2 jam) dan dapar fosfat pH 7,4 (3 jam) dan menghasilkan pelepasan kumulatif dalam dapar fosfat pH 6,8 (3 jam) yang paling optimal, berturut-turut 0,561 ± 0,126%, 8,712 ± 0,119%, dan 28,469 ± 0,214%. Pada uji pentargetan obat, rata-rata jarak tempuh beads tersalut Eudragit L100 10% (formula c) 66,667 ± 1,528 cm dan beads kontrol 62 ± 2,646 cm, dihitung terhadap antrum.

Fibrosis is rare disease but the development is quite alarming. Treatment for colonic fibrosis will be more effective if the drug is released directly to the area of inflamation. Tetrandrine has antifibrotic effect. This aim of research was to formulate tetrandrine into Ca-alginate beads coated Eudragit L100-55 or Eudragit L100 as colon targeted dosage form. Tetrandrine was formulated into Na-alginate because it has good swelling ability at colonic pH and can crosslink to CaCl2. Beads was prepared by ionic gelation method. Ratio between Na-alginate and CaCl2 2:3 (formula 2) showed the most optimal in efficiency of entrapment about 82.460 ± 2.728%. After coating process, formula with Eudragit L100 10% (formula c) was the best formula because it could resist the release of tetrandrine in HCl 0.1 N pH 1.2 (2 hours), phosphate buffer pH 7.4 (3 hours), and showed the most optimal in the release of cumulative in phosphate buffer pH 6.8 (3 hours), respectively 0.561 ± 0.126%, 8.712 ± 0.119%, and 28.469 ± 0.214%. On targeting test, the mean distance that beads propagated was 66.667 ± 1.528 cm for beads coated Eudragit L100 10% (formula c) and 62 ± 2.646 cm for control, calculated from antrum.
"
Depok: Fakultas Farmasi Universitas Indonesia, 2016
S65192
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nofentari Putri
"Pada penelitian ini, sintesis nanopartikel ZnO, nanopartikel SmFeO3 dan nanokomposit ZnO/SmFeO3 berhasil dilakukan dengan ekstrak daun kembang merak (Caesalpinia pulcherrima (L.) Sw.) yang berperan sebagai sumber basa lemah dan capping agent. Hasil sintesis dikarakterisasi menggunakan instrumen spektrofotometer UV –Vis, UV–Vis DRS, spektroskopi FTIR, XRD, PSA, SEM EDX dan TEM. Hasil karakterisasi spektroskopi UV–Vis menunjukkan adanya puncak serapan UV–Vis nanopartikel ZnO pada panjang gelombang 370 nm. Hasil karakterisasi UV–Vis DRS menunjukkan nilai band gap nanopartikel ZnO, nanopartikel SmFeO3 dan nanokomposit ZnO/SmFeO3 berturut–turut sebesar 3,2 Ev ; 1,95 eV dan 2,90 eV. Hasil karakterisasi XRD membuktikan bahwa nanopartikel ZnO memiliki struktur heksagonal wurtzite, nanopartikel SmFeO3 memiliki struktur orthorombic. Hasil karakterisasi PSA menunjukkan bahwa distribusi rata–rata ukuran partikel ZnO pada 66,71 nm. Berdasarkan hasil karakterisasi TEM ukuran rata–rata partikel SmFeO3 73,27 nm.
Nanopartikel ZnO, nanopartikel SmFeO3 dan naokomposit ZnO/SmFeO3 diuji aktivitas fotokatalitiknya untuk mendegradasi senyawa zat warna malasit hijau dibawah sinar tampak. Persentase degradasi malasit menggunakan nanopartikel ZnO, nanopartikel SmFeO3 dan nanokomposit ZnO/SmFeO3 beturut – turut sebesar 91,77% ; 85,41% dan 94,42% selama 2 jam waktu penyinaran. Perhitungan kinetika reaksi fotodegradasi malasit hijau menggunakan bahwa nanokomposit ZnO/SmFeO3 mengikuti reaksi orde satu semu.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nuraini Pahlawati Aziza
"ABSTRAK
Tahap awal penelitian dimulai dari pembuatan Katalis Na-ACE dari cangkang telur ayam yang diaktivasi dengan cara kalsinasi dalam suhu 950oC dan menghasilkan bubuk putih yang merupakan ACE (Activated Chicken Eggshell). ACE diimpregnasi logam Na dengan menggunakan prekursor NaOH 3% sehingga menghasilkan Na-ACE yang memiliki kebasaan lebih besar dibandingkan dengan ACE. ACE dan Na-ACE dikarakterisasi menggunakan FTIR, EDAX dan XRD serta uji kebasaan dengan metode titrasi. Na-ACE yang telah berhasil disintesis digunakan untuk sintesis chalcone yang merupakan intermediet senyawa pirazolin. Senyawa chalcone disintesis melalui mekanisme reaksi kondensasi aldol silang dengan menggunakan starting material 2-Hidroksi Asetofenon dan 2-Hidroksi Benzaldehid yang menghasilkan rendemen terbesar yaitu 84.03% pada kondisi optimum pada Suhu 60oC, selama 3 Jam dengan katalis 15%. Senyawa chalcone hasil sintesis dikarakterisasi menggunakan FTIR, UV-VIS dan LCMS. Sintesis senyawa pirazolin menggunakan senyawa chalcone hasil sintesis sebelumnya dengan hidrazin hidrat dengan perbandingan 1 : 4 yang akan menghasilkan rendemen terbesar pada kondisi optimum 4 jam reaksi, suhu 80oC dan 20% katalis dengan rendemen sebesar 62,98%. Senyawa pirazolin hasil sintesis dikarakterisasi menggunakan FTIR, UV-VIS, dan LCMS. Senyawa chalcone dan pirazolin diuji antioksidan menggunakan DPPH dan didapatkan % inhibisi chalcone sekitar 41% pada konsentrasi chalcone sebesar 1000 ppm sedangkan % inhibisi pada pirazolin sebesar 84% pada konsentrasi pirazolin sebesar 125 ppm.

ABSTRACT
This Research was generated with the synthesis of catalyst Na-ACE from chicken egg shells, activated calcination in temperature of 950oC and will produced a white powder of ACE (Activated Chicken Eggshell). ACE was impregnated by Na metal using NaOH 3% solution as a precursor to produce Na-ACE which has a higher basicity than ACE. ACE and Na-ACE catalyst were characterized by FTIR, XRD and EDAX and for the bacisity test, titration method was used. The catalys of Na-ACE were used for synthesizing chalcone compound as intermediet material of pirazoline synthesis.Chalcone compound was synthesized through cross aldol condensation by reacting two starting materials, 2-hidroksi asetofenon, 2-hidroksi benzaldehid yield of 84,03% at the optimum condition 60oC, 3 hours and 15% catalys weight.this synthesized chalcone compound were characterized using FTIR, UV-VIS, and LCMS. The next step was synthesis pirazoline compound using chalcone and hidrazin hidrat with ratio of 1:4 and produced the greatest yield (62,98%) in the optimum conditionwhich are 4 hours reaction time, temperature of 80oC and 20% catalys weight. Pirazoline compound were characterized using FTIR, UV-VIS, and LCMS. Finally, both of chalcone and pirazoline compound were antioxidant tested using DPPH and resulted around 41% of inhibition of 1000 ppm for chalcone, and 84% inhibition of 125 ppm for pirazoline."
2017
S69955
UI - Skripsi Membership  Universitas Indonesia Library
cover
Izzatu Rizqiyah
"ABSTRAK
Resistensi antibiotik merupakan salah satu masalah kesehatan yang membuat efektivitas pencegahan dan pengobatan berbagai infeksi menjadi berkurang. Peptida antimikroba seperti bakteriosin dapat menjadi kontributor penting dalam mengatasi permasalahan resistensi antibiotik sebagai agen antimikroba baru. Weissella confusa MBF8-1 diketahui menghasilkan tiga jenis bakteriosin yaitu Bac1, Bac2, dan Bac3 dengan sekuens DNA lengkap yang telah dilaporkan (A.N KR350502). Selain diproduksi melalui ekspresi galur produsen asalnya, bakteriosin dari W. confusa MBF8-1 sudah diproduksi melalui rekayasa genetika sehingga didapat bentuk rekombinannya pada inang B. subtilis DB403 dan disintesis secara kimia. Penelitian ini bertujuan untuk mengkarakterisasi aktivitas antimikroba serta efek sinergis dengan Ampisilin dari bakteriosin rekombinan dan sintetik Bac1, Bac2, dan Bac3 menggunakan metode difusi sumur agar pada Leuconostoc mesenteroides kemudian dilanjutkan dengan uji Konsetrasi Hambat Minimum (KHM) pada L. mesenteroides, Micrococcus luteus, Lactococcus lactis, Staphylococcus aureus, dan Escherichia coli. Hasil menunjukkan peptida sintetik memberikan zona hambat pada L.mesenteroides hanya dengan keberadaan Bac1. Peptida rekombinan tidak menunjukkan adanya inhibisi pada berbagai bentuk kombinasi. Peptida sintetik memiliki efek sinergis jika dikombinasikan dengan Ampisilin terhadap lima bakteri indikator, sedangkan peptida rekombinan tidak menunjukkan adanya efek sinergis. Efek sinergis terbaik yang teramati pada uji KHM dari peptida sintetik dicapai oleh Bac1, diikuti dengan bentuk campuran Bac1, Bac2, dan Bac3 (B1,2,3).

ABSTRACT
Antibiotic resistance is one of health problems that could decrease the effectiveness of infection treatment and prevention. Antimicrobial peptide like bacteriocin could be an important contributor to overcome antibiotic resistance as new antimicrobial agent. Weissella confusa MBF8-1 has been known to produce three types of bacteriocins, Bac1, Bac2, and Bac3, with their complete DNA sequences was reported previously (A.N KR350502). Besides produced through expression of origin producer strain, bacteriocin from W. confusa MBF8-1 has been produced through genetic engineering by recombinatorial process in B. subtilis DB403 and also by chemically synthesized. This study aimed to characterize the antimicrobial activity and the synergystic effect of those three recombinant peptides as well as their synthetic one with Ampicillin. Well-diffusion assay was performed using indicator bacteria Leuconostoc mesenteroides while Minimum Inhibitory Concentration (MIC) assay was performed using indicator bacteria L. mesenteroides, Micrococcus luteus, Lactococcus lactis, Staphylococcus aureus, and Escherichia coli. Result showed that synthetic peptides inhibited growth of L. mesenteroides when combined with Bac1. Recombinant peptides didn?t show any inhibition in various forms of combination. Synthetic peptides showed synergistic effect with Ampicilin against all indicator bacteria, while recombinant peptides showed no synergistic effect. The best synergistic effect with Ampicillin was showed by Bac1 synthetic peptide alone, followed by Bac1, Bac2, and Bac3 in combination (B1,2,3) by performing MIC test."
2016
S63982
UI - Skripsi Membership  Universitas Indonesia Library
cover
Fauziah Anggraeni
"Lapangan Delta di Mahakam cekungan lower Kutai yang sekarang dioperasikan oleh Chevron Indonesia Company telah berproduksi sejak tahun 1975. Produksi dari lapangan ini mencapai puncak produksi sebesar 31 MBO pada tahun 1991, kontribusi terbesar dari produksi tersebut berasal dari zona low resistivity. Berdasarkan data log, zona yang menghasilkan hidrokarbon biasanya terdapat pada zona yang menunjukkan nilai resistivitas yang tinggi, tetapi pada lapangan Delta yang menjadi area penelitian ini sebagian besar produksi didominasi dari zona yang mempunyai nilai resistivitas yang rendah. Berdasarkan hasil analisa menunjukkan bahwa nilai tersebut dipengaruhi oleh beberapa faktor, diantaranya keberadaan mineral pyrite (Fes2), dominasi persentase volume clay dan ketebalan pay zone, dan nilai salinitas yang lebih tinggi dibandingkan dengan zona hidrokarbon yang mempunyai nilai resistivitas yang lebih tinggi pada lapangan ini.
Persentase nilai pyrite yang terdapat pada zona low resisivity ini hanya sebesar 1.2% - 3% dari volume batuan, tetapi nilai tersebut sudah bisa menurunkan nilai resistivitas sebesar 65% lebih rendah dibandingkan dengan zona hidrokarbon yang mempunyai nilai resistivitas yang tinggi pada formasi Deltaic dan Formasi Yakin. Persentase volume clay dan ketebalan juga mempengaruhi, dominasi mineral illite pada shale dan ketebalan kurang dari 5ft akan mempengaruhi penurunan nilai resistivity sebesar 10% dibandingkan high resistivity pay zone pada formasi Deltaic dan formasi Yakin. Dari analisa laboratorium pada air formasi menunjukkan bahwa pada zona low resistivity mempunyai nilai salinitas lebih tinggi 2000ppm diandingkan formasi Deltaic dan Formasi Yakin.

Sepinggan Field in Lower Kutai Basin which is in Mahakam Block and operated by Chevron Pacific Indonesia has been produced since 1975. Hydrocarbon pay zone generally has high resistivity. Nevertheless, Sepinggan Field production is primarily from low resistivity zone which is the most contributors even for its peak production at 31 MBO in 1991. Analysis result shows that the low resistivity value of the zone is influenced by some factors. These factors are pyrite content (FeS2), clay volume percentage domination and pay zone thickness, and more saline than high resistivity pay zone salinity. Pyrite volume percentage in this low resistivity zone ranges from 1.2 to 3 %.
This value can reduce 65 % from the normal resistivity value of hydrocarbon zones from Deltaic and Yakin Formation in this field. Illite domination in clay mineral content and less than 5 ft thickness also can reduce 10 % from the normal resistivity value of Deltaic and Yakin. Formation pay zones Laboratory analysis of formation water shows that salinity of low resistivity zone has 2000 ppm higher than Deltaic and Yakin water formation salinities.
"
Depok: Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Indonesia, 2019
T54172
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>