Hasil Pencarian  ::  Simpan CSV :: Kembali

Hasil Pencarian

Ditemukan 26631 dokumen yang sesuai dengan query
cover
Narottama Tunjung Hariwangsa
"Reduksi secara tertutup dan fiksasi internal menggunakan miniplate dan screw titanium masih merupakan modalitas terapi yang terbaik untuk fraktur tulang wajah yang displaced dengan gangguan fungsi dan deformitas secara penampilan. Namun, implan maksilofasial yang beredar di Indonesia masih sangat mahal. Untuk itu diperkenalkan miniplate dan screw buatan lokal (UniFIX®) yang lebih murah dan memiliki kualitas yang sama dengan miniplate dan screw yang diimpor. Dilakukan studi eksperimental cross over dengan menggunakan enam belas model tengkorak dari bahan polyurethane yang dipasang implan UniFIX® dan implan impor pada bagian rima orbita inferior oleh pengguna. Dilakukan pencatatan terhadap waktu untuk menyelesaikan pemasangan miniplate dan screw. Setiap pengguna diberikan kuesioner evaluasi terhadap kemudahan penggunaan miniplate dan screw dalam hal kenyamanan saat penggunaan, kecocokan screw dengan screwdriver, pembengkokan plate, dan self-tapping dari screw. Setelah itu, dilakukan penilaian oleh konsultan ahli kraniofasial terhadap stabilitas dan adaptabilitas dari miniplate dan screw yang telah dipasang. Hasil penelitian menunjukkan bahwa miniplate dan screw UniFIX® tidak inferior jika dibandingkan dengan miniplate dan screw impor dalam hal kemudahan penggunaan. Meskipun demikian, karakteristik self-tapping screw UniFIX® dapat ditingkatkan untuk mendapatkan kualitas yang lebih baik.

Open reduction and internal fixation using miniplate and screw is still the best treatment of displaced facial fracture with functional impairment and cosmetic deformity. However, imported miniplate and screw currently widely used are highly costly. Therefore, a locally-made miniplate and screw (UniFIX®) which is cost-efficient and has the same quality with the imported brand is introduced. This study aims to evaluate the usability of UniFIX® miniplate and screw in comparison with the imported miniplate and screw. Cross over experimental study was conducted with sixteen polyurethane anatomical skull models. Both UniFIX® and imported miniplate and screw were placed on the infraorbital rims by users. Time to complete the placement was recorded. Each user received questionnaire to evaluate the usability of miniplate and screw in terms of operator s comfort, screw fit to screwdriver, plate bending, and self-tapping of the screw. Subsequently, two craniofacial consultants were given scoring sheet to evaluate the stability and the adaptability of each miniplate and screw. The results showed that the usability of UniFIX® miniplate and screw was not inferior compared to the imported brand. Nevertheless, the self-tapping feature of locally-made screw may be improved to produce better quality."
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2019
T57601
UI - Tesis Membership  Universitas Indonesia Library
cover
Teuku Nanda Putra
"Maxillofacial trauma is one of the most devastating injuries faced by all plastic
surgeons. In the event of displacement and unstable fracture segments, which can lead
to functional disruption, an open reduction and an internal fixation using miniplate and
screws are indicated. However, currently commonly used imported miniplate and screw
are very costly. The purpose of this study is therefore to evaluate the locally
made miniplate and screw in maxillofacial fracture management compared to the
imported miniplate and screw. The study is a blind randomized clinical trial of patients
with mid-face fractures arriving at Cipto Mangunkusumo Hospital. Subjects are fracture
lines that meet both inclusion and exclusion criteria and are then randomized to the
study (locally made miniplate and screw) and control (BIOMET ® miniplate and screw)
through a predetermined randomization list. Bone density is followed by non-contrast
head tomography immediately after surgery as a baseline and three months post-op.
Subsequently, a radiologist consultant as a blinded evaluator will evaluate the bone
density score and any screw loosening present local tissue reactions after fixation during
a visit to the outpatient clinic once a week for three weeks. The preliminary result of the
first 9 samples suggested the locally-made miniplate and screw showed the same quality
compare to the control. Bone density promoted by both implants was not significant
difference (P>0.05). There was no tissue reaction presentation around both implant
placement and nor the screw loosening appears at the three-month CT-Scan evaluation.
Due to the COVID-19 pandemic, it is difficult to reach the number of samples as
planned, the clinical study was underpowered. Further clinical study is necessary to
improve the self-taping feature of the screw and reaching a more power study in order
to establish the non-inferiority of locally made miniplate and screw.

Trauma maksilofasial adalah salah satu cedera paling parah yang dihadapi semua ahli
bedah plastik. Jika terjadi pergeseran dan segmen fraktur yang tidak stabil, yang
menyebabkan gangguan fungsi, maka diindikasikan untuk dilakukan tindakan reduksi
terbuka dan fiksasi internal menggunakan miniplate dan screw. Namun saat ini
miniplate dan screw impor yang biasa digunakan sangat mahal harganya. Oleh karena
itu, tujuan dan penelitian ini adalah untuk mengevaluasi miniplate dan screw buatan
lokal dalam manajemen fraktur maksilofasial yang dibandingkan dengan miniplate dan
screw impor. Desain penelitian adalah blind randomized clinical trial yang dilakukan
pada pasien dengan fraktur wajah bagian tengah yang datang ke Rumah Sakit Cipto
Mangunkusumo. Subjek penelitian ini adalah garis fraktur yang memenuhi kriteria
inklusi dan eksklusi dan kemudian akan dimasukkan kedalam grup intervensi (miniplate
dan screw buatan lokal) dan grup kontrol (BIOMET ® miniplate dan screw) secara acak
berdasarkan predetermined randomization list. Kepadatan tulang akan dievaluasi
menggunakan CT-Scan kepala non kontras segera setelah operasi sebagai baseline dan
dilakukan kembali tiga bulan pasca operasi. Selanjutnya dokter konsultan radiologi
yang bertindak sebagai blind evaluator akan mengevaluasi nilai kepadatan tulang dan
apakah ada tampilan screw yang longgar pada gambaran CT-Scan. Reaksi jaringan lokal
disekitar lokasi pemasangan implant juga akan dievaluasi setiap minggu selama tiga
minggu pada saat pasien menjalani perawatan melalui poliklinik bedah plastik. Hasil
studi pendahuluan terhadap 9 sampel awal menunjukkan bahwa miniplate dan screw
buatan lokal memiliki kualitas yang sama dengan miniplate dan screw impor. Tidak ada
perbedaan signifikan (P>0.05) pada kepadatan tulang yang dihasilkan oleh kedua
Miniplate dan screw. Tidak ada reaksi jaringan sekitar pemasangan implant yang terjadi
selama pengamatan dan juga tidak ada tampilan screw loosening pada CT-Scan tiga
bulan pasca operasi. Jumlah sampel yang sedikit akibat pandemik COVID-19
menyebabkan studi ini underpowered. Dibutuhkan studi lanjutan guna memperbaiki
fitur self-taping pada screw dalam rangka membuktikan bahwa Miniplate dan screw
buatan lokal tidak lebih inferior.
"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2020
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Tasya Anggrahita Rinintyaring P.
"

Pananganan Fraktur Kraniomaksilofasial dengan metode Open Reduction Internal Fixation (ORIF) menggunakan miniplat titanium implant, adalah suatu modalitas yang paling superior. Namun demikian, Implant titanium yang beredar di Indonesia hingga saat ini adalah produk impor yang memiliki harga yang sangat tinggi. Maka dari itu, tim penelitian kami mengembangkan miniplat titanium implant buatan lokal yang lebih cost-efficient. Diharapkan miniplat yang kami kembangkan memiliki histokompatibilitas dan dapat memilliki penyembuhan tulang yang sama dengan produk impor. Penelitian ini adalah studi eksperimental menggunakan hewan coba berupa kelinci jenis New Zealand White Rabbit, yang dikelompokan menjadi 2 group. Setelah dilakukan osteotomi satu sisi pada arkus Zigoma, setiap grup akan dilakukan reduksi terbuka dan fiksasi garis fraktur menggunakan salah satu implant miniplat impor (Biomet®) ataupun implant lokal (UniFix®).  Setelah 5 hari, 4 minggu dan 8 mingu post operasi, 5 kelinci pada masing-masing grup akan di euthanasia dan dilakukan pengambilan sampel untuk pemeriksaan mikroskopik untuk mengevaluasi rasio penyembuhan tulang dan biokompatibilitas diantara masing-masing grup. Dari pengamatan, tidak ditemukan adanya komplikasi penyembuhan luka , seperti infeksi, seroma, maupun hematoma. Adapun tulang berhasil mengalami penyembuhan luka sesuai timeline, meskipun ditemukan kuantitas lamellar bone yang lebih besar pada treatment grup di minggu ke 8, dan signifikan secara statistik (Mean (%) treatment 65.3 (±3.7), and control 52.2 (±6.5) with p= 0.028). Adapun ditemukan pula pembentukan jaringan fibrokartilage pada hari ke 5, yang pada akhirnya berubah menjadi tulang matur pada periode selanjutknya. Jaringan fibrocartilage juga ditemui sedikit lebih besar pada minggu ke-8 pada grup komtrol (Mean (%) treatment 6.7(±6.4) and control 17(±3.3),p=0.038). Sel sel inflamatorik disekitar insersi screw dan jaringan granulasi pada lokasi garis fraktur tampak  mencapai puncaknya pada hari ke5, sebagai tanda proses natural dari fase inflamasi. Metal debris terdetaksi pada hampir semua sampel, dimana tidak ada perbedaan secara signifikan (n/total treatment 12(13), control 12(13), p=1.000). Namun demikian, adanya metal debris yang terdeteksi tidak memicu terbentuknya sel inflamatorik dan formasi dari sel giant. Studi ini menandakan fiksasi untuk fraktur midfacial dengan implant buatan lokal (UniFIX) menunjukkan histokompatibilitas yang baik, dan dapat mencapai penyembuhan tulang yang baik, serta tidak lebih inferior dibandingkan implant produk impor. Studi ini juga menunjukkan bahwa UniFIX adalah suatu modalitas fiksasi interna yang menjanjikan dan memerlukan support bersama untuk kemajuan dan pengembangannya di masa depan.


Open reduction and internal fixation by rigid titanium miniplate fixation had become the superior modalities for managing the craniomaxillofacial fractures. However, the titanium miniplate and screw available in Indonesia to-date is all high cost imported product. Therefore, our team is developing a locally made titanium miniplate and screw fixation with more cost-efficiently. It is hoped this locally-made titanium miniplate and screw (UniFix®) could provide the same histocompatibility and could provide adequate bone healing as the imported one. This study is an experimental study using 30 New Zealand white rabbits that divided into 2 groups. After performing one-sided zygomatic arch osteotomy, each group will be performed open reduction and applied whether a standardized imported mini-plate and screw (Biomet®) as group 1 or a locally made mini-plate and screw (UniFix®) as group 2. After 5 days, 4 week, and 8 weeks postoperatively, 5 rabbits on each group is euthanized and microscopic evaluation is conducted to evaluate the rate of bone healing and biocompatibility between each group. We have not seen any wound complication with respect of infection, seroma, and hematoma during observation of 5 days, 28 days, and 56 days. The bone is healed according to the timeline on both groups, although we found the treatment group had greater quantity of lamellar bone on day 56, and its statistically significance (Mean (%) treatment 65.3 (±3.7), and control 52.2 (±6.5) with p= 0.028). Though we also found fibrocartilage callus present around the fracture site especially the 5th day, but the fibrocartilage callus succeeded to turn over into mature bone in later period. We still found slightly bigger amount of fibrocartilage tissue on the 56th day on control group (Mean (%) treatment 6.7(±6.4) and control 17(±3.3),p=0.038). The inflammatory cells around the screw insertion and the granulation tissue of the fracture site had the highest peak on the 5th day observation marking the nature of inflammatory phase of bone healing. Metal debris found on both of the samples with no significance difference (n/total treatment 12(13), control 12(13), p=1.000). But the presence of metal debris hardly provokes any inflammatory cells and giant body formation around the screw site.This study shows the fixation of midfacial fracture using UniFIX presents good histocompatibility and adequate fracture healing and it is not inferior compared to the imported brand. This study also shows that UniFIX is a promising internal fixation modality and it needs further encouragement for future improvement and development

 

"
Jakarta: Fakultas Kedokteran Universitas Indonesia, 2019
T55576
UI - Tesis Membership  Universitas Indonesia Library
cover
Iqbal Rizky Ramadhan
"Saat ini sebagian besar produk implan yang beredar di Indonesia adalah produk impor. Kementerian Kesehatan dan Kementerian Riset,Teknologi,dan Pendidikan Tinggi mendorong produksi produk implan dalam negeri supaya bisa menjadi alternatif produk implan yang selama ini didominasi oleh produk impor. Penelitian ini bertujuan untuk mengetahui kemampuan pullout dan torsi dari screw domestik yang telah dibuat dengan mengacu kepada STM F-543 tentang metode pengetesan untuk screw tulang. Spesifikasi screw yang digunakan dalam penelitian ini adalah screw titanium berukuran M1.5 yang digunakan untuk fiksasi pada area maksilofasial. Performa pullout dicari dengan menggunakan cara eksperimen, finite elemen, dan matematikal. Performa pullout screw domestik kemudian dibandingkan dengan performa screw impor. Sedangkan untuk performa torsi hanya dilakukan dengan cara eksperimen kemudian dibandingkan dengan performa dari screw impor.
Hasil yang didapatkan menunjukkan bahwa nilai pull out screw domestik adalah 10,02 N dan screw impor 11,88 N. Nilai screw domestik dibandingkan dengan hasil finite elemen menunjukkan bahwa terjadi error sebesar 10,30. Sedangkan dengan menggunakan analitikal menggunakan chapman yang dimodifikasi didapat nilai sebesar 10,12 N atau error sebesar 1 Dari nilai yang didapat menunjukkan bahwa performa pullout screw domestik lebih buruk dari screw impor. Untuk performa torsi kedua screw menunjukkan performa yang sama baiknya yaitu 0,029 Nm untuk screw domestic dan 0,028 Nm untuk screw impor. Akan tetapi screw domestik membutuhkan gaya yang lebih besar untuk dipasang karena memiliki ujung yang lebih tumpul dari screw impor.

Currently, the most of implant products that sold at Indonesia are imported product. The Ministry of Health and the Ministry of Research, Technology and Higher Education stimulate domestic implant production as an alternative for imported products that have been dominating domestic market. This study aims to observe domestic titanium screw performance especially from torque and pull out performance based on ASTM F 532 about test method for metallic bone screw. The implant spesification that observed is screw M1.5 for maxillofacial region. Those performances are tested using experimental approach, Finite Element Analysis FEA, and mathematical approach for pull out and only experimental approach for torque test.
The results of this study show that the value of pull out from domestic titanium screw UI and commmercial screw respectively are 10,02 N and 11,88 N. This result for domestic screw UI is not slightly different from result which using FEA approach with error 10,30 for pull out. In the other hands, mathematical approach using chapman modified method give error 1 for pull out. The result of this study shows that the value of pull out performance of domestic titanium screw is a little bit worse than imported commercial product. For torwque performance, domestic screw UI has value 0,029 Nm which is as good as commercial screw with value 0,028 Nm. But, domestic screw needs more force to drive the screw into test block because it has duller tip than commercial screw.
"
Depok: Fakultas Teknik Universitas Indonesia, 2018
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
I Putu Wahyu Diasmika
"Tulang tengkorak berfungsi untuk membentuk struktur kepala dan melindungi organ-organ penting di dalamnya. Keretakan tulang tengkorak dapat menyebabkan berbagai gangguan kesehatan, mental, dan bahkan kematian. Polilaktida (PLA) telah menjadi salah satu bahan implan yang paling banyak digunakan untuk keretakan tulang tengkorak. Hal ini dikarenakan PLA memiliki sifat toksisitas yang rendah, biokompatibilitas, dan biodegradabilitas, serta sifat mekanis yang baik. Salah satu turunan dari PLA adalah PLLA (poli(L-laktida)) dengan struktur semi-kristalin yang digunakan pada penelitian ini. PLLA tersebut perlu dilakukan alterasi supaya sifat mekanis dan sifat degradasi sesuai dengan aplikasi pelat fiksasi patah tulang kraniomaksilofasial. Bahan yang ditambahkan dalam matriks PLLA merupakan agar-agar dengan struktur amorf. Penelitian ini bertujuan untuk memperoleh komposisi campuran yang optimal dari variasi campuran agar-agar, yaitu 4%, 8%, dan 12%. Pencampuran menggunakan metode melt-blending yaitu mencampurkan dan mengaduk bahan dalam kondisi lelehan. Sampel dicetak dengan dimensi 80×10×4 mm sesuai standar ISO 178 untuk pengujian kekuatan tekuk polimer. Sampel dilakukan karakterisasi FTIR, TGA, DSC, three-point bending UTM. Hasil karakteriasi dengan FTIR menunjukan terdapat gugus C=O, C-H simetris dan asimetris, C-O, C-COO, serta pergeseran nomor gelombang karena pengaruh suhu yang lebih tinggi. Selain itu, karakteriasi termal TGA menunjukan bahwa campuran dengan konsentrasi agar-agar yang lebih tinggi menunjukkan degradasi yang lebih besar pada suhu campuran 180°C. Suhu yang lebih tinggi juga mempercepat degradasi agar-agar dalam campuran. Hasil DSC menunjukan bahwa semakin tinggi penambahan agar-agar dalam matriks PLLA, maka titik leleh dan %Xc dari PLLA akan semakin menurun. Hal tersebut juga berdampak dengan hasil pengujian sifat mekanis, di mana kekuatan tekuk semakin menurun seiring bertambahnya agar-agar. Nilai dari kekuatan tekuk dan regangan cenderung terus menurun dari 0,87 hingga 0,35 MPa seiring dengan bertambahnya kadar agar-agar dalam matriks PLLA baik untuk T1 (160oC) maupun T2 (180oC).

The skull functions to form the structure of the head and protect the vital organs within it. Skull fractures can cause various health issues, mental disturbances, and even death. Polylactide (PLA) has become one of the most widely used implant materials for skull fractures due to its biocompatibility, biodegradability, low immunogenicity and toxicity, and good mechanical properties. The main material used is poly(L-lactide) (PLLA) with a semi-crystalline structure. The PLLA needs to be altered to achieve the appropriate mechanical and degradation properties for craniomaxillofacial fracture fixation plates. Agar-agar with an amorphous structure is added to the PLLA matrix. This study aims to obtain the optimal composition from the variations of agar-agar mixtures, namely 4%, 8%, and 12%. The mixing is done using the melt-blending method, which involves mixing and stirring the materials in a molten state. Samples are molded to dimensions of 80×10×4 mm according to ISO 178 standards for polymer bending strength testing. The samples are characterized using FTIR, TGA, DSC, and three-point bending UTM. The FTIR characterization results show the presence of C=O, symmetric and asymmetric C-H, C-O, C-COO groups, and shifts in wave numbers due to the influence of higher temperatures. Additionally, the TGA thermal characterization shows that mixtures with higher agar-agar concentrations exhibit greater degradation at a mixing temperature of 180°C. Higher temperatures also accelerate the degradation of agar-agar in the mixture. DSC tests indicate that the higher the addition of agar-agar in the PLLA matrix, the more the melting point and %Xc of PLLA decrease. This also impacts the mechanical properties test results, where the bending strength decreases with increasing agar-agar content. In the mechanical properties test, the values of bending strength and strain tend to continuously decrease with increasing agar-agar content in the PLLA matrix for both T1 (160oC) and T2 (180oC)."
Depok: Fakultas Teknik Universitas Indonesia, 2024
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Tentues Immanuel Pratama
"Pelepasan ion Al dan V pada produk komersial implan medis Ti-6Al-4V dapat menyebabkan permasalahan kesehatan karena bersifat toksik. Selain itu modulus elastisitas implan medis Ti-6Al-4V relatif lebih tinggi dari modulus elastisitas tulang manusia, sehingga dapat menyebabkan fenomena stress shielding effect. Oleh sebab itu, dilakukan pergantian unsur Al dan V dengan unsur Nb dan Mo yang tidak bersifat toksik. Kemudian ditambahkan kembali unsur low cost Mn dengan variasi 2%, 4%, dan 6% untuk mensubtitusi unsur Nb dan Mo yang termasuk unsur yang relatif mahal. Unsur Nb, Mo dan Mn merupakan unsur penstabil fasa β yang memiliki nilai modulus elastisitas lebih rendah dibanding Ti-6Al-4V. Fasa β merupakan fasa yang stabil pada suhu tinggi, sehingga dilakukan perlakuan panas untuk menstabilkan fasa ini dengan homogenisasi pada 3, 6 dan 12 jam untuk mengetahui pengaruhnya.
Hasil penelitian membuktikan bahwa penambahan komposisi Mn pada paduan menyebabkan penurunan efek toksisitas dengan menstabilkan pembentukan lapisan pasif pada permukaan logam. Lalu, didapatkan perolehan fraksi volume fasa β yang meningkat seiring penambahan komposisi unsur Mn sehingga didapatkan nilai modulus elastisitas yang menurun. Pada proses perlakuan panas, waktu 6 jam merupakan waktu yang optimal untuk memperoleh fasa β yang lebih homogen dengan mengeliminasi sisa fraksi volume fasa α yang ada pada paduan.
Dapat disimpulkan penambahan komposisi unsur paduan Mn akan meningkatkan perolehan fasa β dan perlakuan panas perlu dilakukan untuk mendapatkan fasa β yang stabil dan homogen, sehingga didapatkan paduan yang lebih inert dengan nilai modulus elastisitas mendekati nilai modulus elastisistas tulang manusia.

The release of Al and V ions in commercial products of Ti-6Al-4V medical implants can cause health problems because they are toxic. In addition, the modulus of elasticity of Ti-6Al-4V medical implants is relatively higher than the modulus of elasticity of human bones, so that it can cause stress shielding effect phenomena. Therefore, al and V elements are replaced with Nb and Mo elements which are not toxic. Then the low cost Mn element was added with variations of 2%, 4%, and 6% to substitute Nb and Mo elements which included relatively expensive elements. Nb, Mo and Mn elements are β phase stabilizers which have a modulus of elasticity lower than Ti-6Al-4V. The β phase is a phase that is stable at high temperatures, so heat treatment is carried out to stabilize this phase by homogenization at 3, 6 and 12 hours to determine its effect.
As a result, the addition of the Mn composition to the alloy causes a decrease in the effect of toxicity by stabilizing the formation of a passive layer on the metal surface. Then, the acquisition of β phase volume fraction obtained increases with the addition of the composition of the element Mn so that the modulus of elasticity decreases. In the heat treatment process, 6 hours is the optimal time to obtain a more homogeneous β phase by eliminating the remaining α phase volume fraction present in the alloy.
It can be concluded that the addition of Mn alloy element composition will increase β phase acquisition and heat treatment needs to be done to obtain a stable and homogeneous β phase, so that more inert alloys with elastic modulus values ​​are obtained close to the human bone elastic modulus.
"
Depok: Fakultas Teknik Universitas Indonesia, 2019
S-Pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Adisty Setyari Putri
"Tujuan: Mini implan ortodontik berbahan titanium alloy sebagai penjangkaran skeletal diketahui memiliki ketahanan korosi yang tinggi, namun beberapa penelitian menemukan adanya perubahan ketahanan korosi setelah berkontak dengan larutan kumur. Penelitian ini bertujuan untuk menganalisis perubahan topografi permukaan dan perubahan komposisi elemental mini implan ortodontik titanium alloy setelah pemaparan dengan tiga jenis larutan kumur.
Metode: Sebanyak 28 mini implan ortodontik dibagi menjadi empat kelompok secara merata dan direndam selama 28 hari dalam larutan klorheksidin glukonat 0.2%, sodium fluoride 0.2%, dan kitosan 1.5%, dan air destilasi. Topografi permukaan bagian kepala dan leher mini implan ortodontik diperiksa menggunakan scanning electron microscopy (SEM) dan komposisi elemental dinilai menggunakan energy-dispersive x-ray spectroscopy energi (EDS).
Hasil: Topografi permukaan mini implan ortodontik pada semua kelompok menunjukkan beberapa iregularitas permukaan karena cacat manufaktur, tetapi tidak ditemukan korosi celah maupun korosi lubang. Mini implan ortodontik yang direndam dalam kitosan menunjukkan permukaan yang lebih halus. Komposisi elemental hanya menunjukkan perbedaan bermakna pada elemen titanium dan aluminium antara kelompok sodium fluorida dan kitosan.
Kesimpulan: Mini implan ortodontik titanium alloy menunjukkan ketahanan korosi yang baik setelah pemaparan dalam larutan klorheksidin glukonat, sodium fluoride, dan kitosan selama 28 hari. Mini-implan ortodontik yang direndam dalam kitosan menunjukkan permukaan yang lebih halus dan komposisi elemen titanium dan aluminium yang lebih tinggi dibandingkan kelompok lain.

Objectives: Orthodontic mini-implants are widely used as an intraoral skeletal anchorages. Titanium alloy orthodontic mini-implants are known to have high corrosion resistance, but studies have found some corrosion behavior after contact with mouthwashes. The current in- vitro study aimed to examine surface topography and elemental composition as parameters of corrosion resistance for titanium alloy orthodontic mini-implants after being immersed in three different types of mouthwashes.
Methods: A total of 28 titanium alloy orthodontic mini- implants were divided equally into four groups and immersed for 28 days in chlorhexidine gluconate 0.2% mouthwash, sodium fluoride 0.2% mouthwash, chitosan 1.5% mouthwash, and distilled water. All the orthodontic mini-implants’ heads and necks were then examined for surface topography using a scanning electron microscopy (SEM) and the elemental composition was assessed using energy-dispersive x-ray spectroscopy (EDS).
Results: Surface topography of the orthodontic mini-implants immersed in chlorhexidine gluconate, sodium fluoride, chitosan, and distilled water exhibited some manufacturing defects and rough surfaces, but no signs of crevices or pitting corrosion on the heads and necks. The elemental composition of all groups was comparable, but there was a statistically significant difference between titanium and aluminum (at%) between the sodium fluoride group and the chitosan group.
Conclusion: Titanium alloy orthodontic mini-implants exhibited good corrosion resistance after immersion for 28 days in chlorhexidine gluconate 0.2%, sodium fluoride 0.2%, and chitosan 1.5%. Orthodontic mini-implants immersed in chitosan showed a smoother surface and higher titanium and aluminum (at%) than other groups.
"
Jakarta: Fakultas Kedokteran Gigi Universitas Indonesia, 2021
SP-pdf
UI - Tugas Akhir  Universitas Indonesia Library
cover
Marthan Lassandy
"ABSTRAK
Manufaktur adalah suatu kegiatan pengolahan bahan baku menjadi produk setengah jadi atau produk jadi. Selain proses manufaktur di dalam perindustrian adalah perancangan produk, seleksi material, distribusi material yang dibutuhkan untuk menciptakan suatu produk. Suatu produk yang dihasilkan dari suatu sistem manufaktur, mempunyai suatu indeks kompleksitas produk yang menggambarkan bahwa produk tersebut dibuat dengan tingkat kompleksitas tertentu. Metode terpilih dalam aplikasi implant miniplate adalah metode kuantitatif dengan gabungan pendekatan analitis, karena dianggap sesuai dan didasarkan pada rincian analisis desain produk, fiturnya, yang disesuaikan dengan proses manufaktur pada kasus terkait, bukan hanya mengandalkan data masa lalu atau pengetahuan tentang seorang estimator. Implant miniplate tergolong baru dan merupakan produk yang pertama dibuat maka metode kualitatif tidak sesuai dengan aplikasi yang dipilih. Indeks kompleksitas proses dari proses manufaktur implant miniplate adalah 101,9 Estimasi biaya proses dari proses manufaktur implant miniplate dengan menggunakan gabungan teknik analitis adalah Rp 139.150,9 Indeks kompleksitas proses dan biaya dari proses manufaktur implant miniplate pada tahap awal desain dapat dilakukan dengan bantuan software Siemens Nx 8 sebagai panduan penentuan waktu dengan parameter yang sama.

ABSTRACT
Manufacturing is an activity of processing raw materials into semi finished or finished products. In addition to manufacturing processes within the industry are product design, material selection, material distribution needed to create a product. A product produced from a manufacturing system, has an index of product complexity that illustrates that the product is made with a certain degree of complexity. The preferred method in miniplate implant application is a quantitative method with a combined analytical approach, as it is considered appropriate and based on the details of the product design analysis, its features, tailored to the manufacturing process in the related case, rather than relying only on past data or the knowledge of an estimator. Miniplate implants are new and are the first product created then the qualitative method does not match the selected application. The process complexity index of the miniplate implant manufacturing process is 101.9 The estimated process cost of the miniplate implant manufacturing process using a combined analytical technique is Rp 139.150.9 The process and process complexity index of the miniplate implant manufacturing process in the early stages of the design can be done with the help of Siemens software Nx 8 as a timing guide with the same parameters. "
Depok: Fakultas Teknik Universitas Indonesia, 2018
T50638
UI - Tesis Membership  Universitas Indonesia Library
cover
Fajar Bayu Ajiriyanto
"Salah satu penggunaan material implan yang paling popular adalah Titanium. Titanium digunakan sebagai material implan karena memiliki sifat biokompatibilitas yang baik karena adanya lapisan oksida tipis di permukaannya yang secara spontan terbentuk, dimana lapisan oksida ini menyebabkan Titanium menjadi pasif sehingga tidak mengalami korosi saat diaplikasikan menjadi material implan. Namun material Titanium ini tergolong sebagai material bio-inert, sehingga masih kurang mendukung dalam pertumbuhan dan perkembangan tulang (osseointegrasi) jika dibandingkan dengan material yang tergolong sebagai bio-active. Penggunaan material Titanium padat juga masih memiliki keterbatasan dalam propertis mekanis dimana Titanium padat memiliki tingkat kekakuan yang tinggi sehingga menyebabkan fenomena shielding stress, oleh karena itu beberapa peniliti mengajukan penggunaan material berpori sebagai material implan. Untuk meningkatkan osseointegration serta menanggulangi masalah stiffnes penggunaan material Titanium padat, perlu di lakukannya proses elektroforesis hidroksiapatit dan chitosan pada material berpori. Penggunaan hidroksiapatit dan chitosan untuk membentuk lapisan material berpori akan meningkatan osseointegration serta penggunaan material berpori akan menurunkan tingkat kekakuan Titanium padatan sehingga di dapati modulus young yang turun sehingga shielding stress dapat dihindari. Penggunaan voltase 5,6 dan 7 volt dipilih dalam eksperimen ini serta waktu elektroforesis yang dilakukan terdapat 10 dan 15 menit. Pengamatan visual, berat deposisi, serta hasil adhesivitas lapisan HA/CS akan diamati pada eksperimen ini.

One of the most popular uses of implant materials is Titanium. Titanium is used as an implant material because it has good biocompatibility properties due to the presence of a thin oxide layer on its surface which spontaneously forms, where this oxide layer causes Titanium to be passive so that it does not corrode when applied as an implant material. However, this titanium material is classified as a bio-inert material, so it is still less supportive of bone growth and development (osseointegration) when compared to materials classified as bio-active. The use of bulk titanium material also has limitations in mechanical properties where bulk titanium has a high level of rigidity that causes the shielding stress phenomenon, therefore several researchers propose the use of porous materials as implant materials. To improve osseointegration and overcome the problem of stiffness using titanium bulk material, it is necessary to carry out electrophoresis of hydroxyapatite and chitosan on porous materials. The use of hydroxyapatite and chitosan to form a layer of porous material will increase osseointegration and the use of porous materials will reduce the stiffness level of Titanium bulk so that a decrease in Young's modulus is found so that shielding stress can be avoided. The use of voltages of 5.6 and 7 volts was chosen in this experiment and the electrophoresis time was 10 and 15 minutes. Visual observations, deposition weight, and the results of the adhesion of the HA/CS layer will be observed in this experiment."
Depok: Fakultas Teknik Universitas Indonesia, 2021
S-pdf
UI - Skripsi Membership  Universitas Indonesia Library
cover
Nanang Qosim
"Studi ini bertujuan untuk mengembangkan produk implan tulang maksilofasial berbasis biomaterial titanium. Prototipe implan yang terdiri dari screw dan miniplate telah berhasil didesain dan difabrikasi masing-masing menggunakan metode machining dan EDM, dengan 85 toleransi geometri yang dapat diterima. Dilakukan rekayasa permukaan secara mekanis, fisika, kimiawi, dan biologis untuk mengevaluasi performa-performa permukaan implan yang terdiri dari kekasaran, formasi lapisan oksida, deposit unsur kontaminan, dan toksisitas.
Hasil rekayasa menunjukkan bahwa pengetsaan dengan HCl 37 memberikan hasil terbaik dalam menurunkan kekasaran permukaan EDM menjadi kategori moderately rough dengan Ra 0,92 m ?Ra 54, serta mampu mengikis habis unsur kontaminan dari permukaan spesimen. Namun, metode ini cenderung menurunkan wt O sebesar 69 dari kondisi semula. Sebagai proses tambahan, PVD coating mampu meningkatkan wt O spesimen tersebut sebesar dua kali lipat.
Di sisi lain, metode biomachining dengan bakteri A. ferrooxidans tidak dapat bekerja secara optimal untuk merekayasa permukaan Ti6Al4V. Hasil uji toksisitas menunjukkan bahwa prototipe screw tidak berpengaruh terhadap proliferasi dan viabilitas sel punca mesenkimal.
Hasil sebaliknya ditunjukkan oleh prototipe miniplate yang kemungkinan disebabkan oleh deposit unsur kontaminan pada permukaannya. Setelah dilakukan rekayasa permukaan, proliferasi tertinggi ditunjukkan oleh spesimen yang dietsa dengan HCl, dengan persentase sel hidup 92,24 , sehingga memenuhi syarat untuk dapat dikategorikan memiliki biokompatibilitas yang baik.

This study aims to develop titanium biomaterial based maxillofacial bone implant products. Implants consisting of screw and miniplate were successfully designed and fabricated by using machining and EDM method respectively, with 85 of acceptable geometrical tolerances. Mechanical, physical, chemical, and biological surface treatments were employed to evaluate the performances of implant surface such as roughness, formation of the oxide layer, deposition of the contaminant element, and toxicity.
The results show that acid etching with HCl 37 takes the best effect of decreasing the surface roughness of original EDM to the moderately rough category, with Ra of 0.92 m Ra 54 , and able to perfectly eliminate the contaminant elements from the specimen surface. However, this method tends to decrease wt O about 69 from its initial condition. As an additional process, PVD coating is able to increase this wt O by twice as much.
On the other hand, the biomachining with A. ferrooxidans bacteria can not optimally work to remove Ti4Al6V surface. Toxicity test results show that the screw prototype has no effect on the proliferation and viability of mesenchymal stem cells.
The opposite result is shown by the miniplate prototype which is likely to be caused by the deposition of the contaminant elements on its surface. After engineered, the highest proliferation is acquired by specimens etched with HCl, with 92.24 of living cells, so that it is eligible to be categorized as having good biocompatibility.
"
Depok: Fakultas Teknik Universitas Indonesia, 2018
T51203
UI - Tesis Membership  Universitas Indonesia Library
<<   1 2 3 4 5 6 7 8 9 10   >>